DASAN-ACCESS-SLOT-SIP-MIB

All MIBs › DASAN-ACCESS-SLOT-SIP-MIB

Organization: DASAN Networks

Last Updated: 2005-06-11

Category: Telephony/VoIP

Description: Manages SIP VoIP gateway configuration for access slot cards on DASAN Networks platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DASAN-ACCESS-SLOT-SIP-MIB?

This is a SIP-based VoIP access gateway management MIB for slot/card-based equipment on DASAN Networks access platforms, per its stated "Access Gateway Management Information Base" description. It is intended to expose configuration and status for SIP voice gateway cards installed in DASAN chassis slots. No sample objects were provided in this source, so exact table/object names cannot be confirmed, but a MIB of this type would typically cover SIP registration status, call state, and per-slot card operational status -- i.e., software/service status of the VoIP signaling stack per slot. It likely depends on DASAN's broader access-slot/chassis MIB framework for slot indexing. Deployment context is DASAN Networks multi-service access chassis carrying SIP VoIP gateway cards in carrier or enterprise access networks. Engineers can download the DASAN-ACCESS-SLOT-SIP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DASAN-ACCESS-SLOT-SIP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DASAN Networks access chassis with SIP VoIP gateway slot card

Monitoring Examples

No sample objects were provided for this MIB in the source data, so a concrete monitoring example grounded in real object names cannot be given. Based on its stated purpose it would monitor per-slot SIP gateway/registration status, but this cannot be confirmed from the available data.

Imported Objects

From DASAN-SMI

dasanMgmt

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

BITS
Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
mib-2

From SNMPv2-TC

AutonomousType
DisplayString
RowStatus
TEXTUAL-CONVENTION
TestAndIncr
TimeStamp

OIDs

OID symbolic	OID numeric	Type	Access	Description
dasanAccessMib	1.3.6.1.4.1.6296.9.100			Access Gateway Management Information Base (MIB)
dasanAccGatewayMIBObjects	1.3.6.1.4.1.6296.9.100.2
dsAccGwySip	1.3.6.1.4.1.6296.9.100.2.4
dsAccGwySipConfiguration	1.3.6.1.4.1.6296.9.100.2.4.1
dsAccGwyConfigSipSlot	1.3.6.1.4.1.6296.9.100.2.4.1.1
dsAccGwyConfigSipSlotTable	1.3.6.1.4.1.6296.9.100.2.4.1.1.1		not-accessible	A list of dsAccGwyConfigSipSlotEntry object.
dsAccGwyConfigSipSlotEntry	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1		not-accessible	Config AGLU Functions for each slot.
INT dsSipSlotIndex	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.1	INTEGER	read-only	AGLU Slot Index of a System
STR dsSipSlotDomain	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.2	DisplayString	read-write	AGLU domain name (Default: dasan.com)
INT dsSipSlotSockMode	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.3	INTEGER	read-write	AGLU Domain name [valude index] 1 = UDP (Default: 1[UDP]) 2 = TCP
INT dsSipSlotSipPort	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.4	INTEGER	read-write	Local SIP Signaling Port [range] = Port Number (Default: 5060)
STR dsSipSlotProxyAddr1	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.5	DisplayString	read-write	Proxy 1 IP Address [range] = Address Length (Default: 1.1.1.1)
INT dsSipSlotProxyPort1	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.6	INTEGER	read-write	Proxy 1 Signal Port [range] = Port Number (Default: 5060)
STR dsSipSlotProxyAddr2	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.7	DisplayString	read-write	Proxy 2 IP Address [range] = Address Length (Default: 1.1.1.1)
INT dsSipSlotProxyPort2	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.8	INTEGER	read-write	Proxy 2 Signal Port [range] = Port Number (Default: 5060)
STR dsSipSlotProxyAddr3	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.9	DisplayString	read-write	Proxy 3 IP Address [range] = Address Length (Default: 1.1.1.1)
INT dsSipSlotProxyPort3	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.10	INTEGER	read-write	Proxy 3 Signal Port [range] = Port Number (Default: 5060)
STR dsSipSlotHuntMapItem	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.11	DisplayString	read-write	If nCommand is [CMD_GET], [syntax] is 'URI'. For example, aData[0] is 'iptel.org' The other case, if nCommand is [CMD_SET], [syntax] is 'op;URI;Port;IP' (*)op:add/mod/del. For example, ex1) aData[0] = 'add;iptel.org;5060;195.37.77.99' ex2) aData[0] = 'mod;iptel.org;5000;195.37.77.99' ex3) aData[0] = 'del;iptel.org' [range] = Syntax Length (Default: iptel.org;5060;195.37.77.99)
STR dsSipSlotDigitMapItem	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.12	DisplayString	read-write	If nCommand is [CMD_GET], [syntax] is 'PhoneList'. For example, aData[0] is '010' The other case, if nCommand is [CMD_SET], [syntax] is 'op;PhoneList;HuntID;Min;Max;Strip Header; Prefix;Suffix;Strip Tail;Voice Prompt' (*)op:add/mod/del. For example, ex1) aData[0] = 'add;010;0;3;10;none;none;;0' ex2) aData[0] = 'mod;010;0;3;10;none;none;;0' � ex3) aData[0] = 'del;010' [range] = Syntax Length (Default: all;0;1;20;none;none;;0)
INT dsSipSlotSigProvisionTO	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.13	INTEGER	read-write	Singnaling INVITE->TRYING Time [range] = Time in sec (Default: 4)
INT dsSipSlotSigAleringTO	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.14	INTEGER	read-write	Singnaling INVITE[TRYING]->RINGING Time [range] = Time in sec (Default: 16)
INT dsSipSlotSigConnectTO	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.15	INTEGER	read-write	Singnaling INVITE[TRYING,RINGING]-> 200OK Time [range] = Time in sec (Default: 180)
INT dsSipSlotHookOffTO	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.16	INTEGER	read-write	The period : In spite of ringing, a telephone subscriber doesn't answer the telephone. [range] = Time in sec (Default: 60)
INT dsSipSlotHookOnTO	1.3.6.1.4.1.6296.9.100.2.4.1.1.1.1.17	INTEGER	read-write	The period : During generated BusyTone, Hook-Off is being lasted. [range] = Time in sec (Default: 30)
dsAccGwyConfigSipPort	1.3.6.1.4.1.6296.9.100.2.4.1.2
dsAccGwyConfigSipPortTable	1.3.6.1.4.1.6296.9.100.2.4.1.2.1		not-accessible	A list of dsAccGwyConfigSipPortEntry objects.
dsAccGwyConfigSipPortEntry	1.3.6.1.4.1.6296.9.100.2.4.1.2.1.1		not-accessible	Config AGLU Functions for each port.
INT dsSipPortIndex	1.3.6.1.4.1.6296.9.100.2.4.1.2.1.1.1	INTEGER	read-only	AccessGateway Board(AGLU) port Index
STR dsSipPortMyTel	1.3.6.1.4.1.6296.9.100.2.4.1.2.1.1.2	DisplayString	read-write	fxs Phone Number [range] = Length (Default: 1~'64'=>72)
STR dsSipPortURI	1.3.6.1.4.1.6296.9.100.2.4.1.2.1.1.3	DisplayString	read-write	Port URI Address, the address type is '1234@dasan.com' [range] = Length (Default: '1@dasan.com' ~ '64@dasan.com'=>72@dasan.com)
STR dsSipPortContactURI	1.3.6.1.4.1.6296.9.100.2.4.1.2.1.1.4	DisplayString	read-write	Port ContactURI Address, the address type is '1234@dasan.com' or '1234@1.2.3.4' [range] = Length (Default: '1@1.1.1.1' ~ '64@1.1.1.1'=>72@1.1.1.1)
STR dsSipPortDisplayName	1.3.6.1.4.1.6296.9.100.2.4.1.2.1.1.5	DisplayString	read-write	The display name which is going to be inserted in sip-field [range] = Length (Default: 1 ~ '64'=>72)
STR dsSipPortUserName	1.3.6.1.4.1.6296.9.100.2.4.1.2.1.1.6	DisplayString	read-write	The name which is using for the authentication. [range] = Length (Default: 1 ~ '64'=>72)
STR dsSipPortUserID	1.3.6.1.4.1.6296.9.100.2.4.1.2.1.1.7	DisplayString	read-write	The ID which is using for the authentication. [range] = Length (Default: 1 ~ '64'=>72)
STR dsSipPortUserPW	1.3.6.1.4.1.6296.9.100.2.4.1.2.1.1.8	DisplayString	read-write	The Password which is using for the authentication. [range] = Length (Default: 1 ~ '64'=>72)
STR dsSipPortRealM	1.3.6.1.4.1.6296.9.100.2.4.1.2.1.1.9	DisplayString	read-write	The RealM which is using for the authentication. [range] = Length (Default: dasan.com)
INT dsSipPortExpiry	1.3.6.1.4.1.6296.9.100.2.4.1.2.1.1.10	INTEGER	read-write	The Registration Interval time [range] = Time in sec (Default: 60)
dsAccGwySipMonitor	1.3.6.1.4.1.6296.9.100.2.4.2
dsAccGwyMonitorSipPort	1.3.6.1.4.1.6296.9.100.2.4.2.1
dsAccGwyMonitorSipPortTable	1.3.6.1.4.1.6296.9.100.2.4.2.1.1		not-accessible	A list of dsAccGwyMonitorSipPortEntry objects.
dsAccGwyMonitorSipPortEntry	1.3.6.1.4.1.6296.9.100.2.4.2.1.1.1		not-accessible	Monitor AGLU Functions for each slot.
INT dsMonitorSipPortIndex	1.3.6.1.4.1.6296.9.100.2.4.2.1.1.1.1	INTEGER	read-only	AGLU Port Index of a System
INT dsSipPortProxyStatus	1.3.6.1.4.1.6296.9.100.2.4.2.1.1.1.2	INTEGER	read-only	Proxy Server setting status. [valude index] 0 = unreg (Default: 0[unreg]) 1 = reg

RFC description

DASAN access gateway SIP configuration and monitoring for VoIP service management.

Start monitoring DASAN Networks access chassis (SIP VoIP gateway slot card) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DASAN-ACCESS-SLOT-SIP-MIB

What Is DASAN-ACCESS-SLOT-SIP-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description