All MIBs › Nortel-Magellan-Passport-DataIsdnMIB
Category: Telephony/VoIP
Description: Manages Nortel Magellan Passport ISDN data channel configuration for B-channel data services.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Nortel-Magellan-Passport-DataIsdnMIB?
Nortel-Magellan-Passport-DataIsdnMIB manages ISDN B-channel data signaling configuration on the Magellan Passport switch family, covering the data signaling channel components used for ISDN data call setup. It exposes RowStatus provisioning tables, free-text comment fields, and customer identifier association tables for each signaling channel component. The MIB's practical monitoring value is in exposing the operational/row status of each ISDN data channel, since confirming a channel component is active and correctly provisioned is the primary way to detect a failed or misconfigured B-channel before it affects call setup, functioning much like a service health check for the ISDN signaling stack. It follows the shared Magellan Passport component/RowStatus conventions and layers on top of ITU-T ISDN signaling concepts. It is used on Magellan Passport switches providing ISDN data access in carrier and enterprise WAN deployments. Management tools that resolve object names in this space rely on the Nortel-Magellan-Passport-DataIsdnMIB OID tree to correctly identify each ISDN data signaling table and its indexing columns.
IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-Magellan-Passport-DataIsdnMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nortel Magellan Passport WAN switch
- ISDN access node
Monitoring Examples
An engineer polls dataSigChanRowStatusTable/dataSigChanRowStatusEntry to verify a data signaling channel component (indexed by dataSigChanIndex) is active, and reviews dataSigChanCommentText for operator notes on a suspect channel. dataSigChanCidDataTable/dataSigChanCidDataEntry with its customer identifier links the channel to a specific subscriber's ISDN service, so if a customer reports failed data calls, the operator cross-checks dataSigChanProvTable/dataSigChanProvEntry provisioning parameters against the expected configuration.
What Can Be Monitored
- ISDN data signaling channel row status
- channel provisioning parameters
- customer identifier per channel
- operator comment text
- component storage type
This MIB depends on
Related MIBs
Imported Objects
From Nortel-Magellan-Passport-StandardTextualConventionsMIB
| DisplayString | |
| Integer32 | |
| InterfaceIndex | |
| RowStatus | |
| StorageType | |
| Unsigned32 |
From Nortel-Magellan-Passport-TextualConventionsMIB
| AsciiString | |
| DigitString | |
| NonReplicated |
From Nortel-Magellan-Passport-UsefulDefinitionsMIB
| components | OBJECT-IDENTITY |
| passportMIBs | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dataIsdnCapabilities | 1.3.6.1.4.1.562.2.4.2.113.3 | |||
| dataIsdnCapabilitiesBD | 1.3.6.1.4.1.562.2.4.2.113.3.4 | |||
| dataIsdnCapabilitiesBD01 | 1.3.6.1.4.1.562.2.4.2.113.3.4.2 | |||
| dataIsdnCapabilitiesBD01A | 1.3.6.1.4.1.562.2.4.2.113.3.4.2.2 | |||
| dataIsdnGroup | 1.3.6.1.4.1.562.2.4.2.113.1 | |||
| dataIsdnGroupBD | 1.3.6.1.4.1.562.2.4.2.113.1.4 | |||
| dataIsdnGroupBD01 | 1.3.6.1.4.1.562.2.4.2.113.1.4.2 | |||
| dataIsdnGroupBD01A | 1.3.6.1.4.1.562.2.4.2.113.1.4.2.2 | |||
| dataIsdnMIB | 1.3.6.1.4.1.562.2.4.2.113 | |||
| dataSigChan | 1.3.6.1.4.1.562.2.4.1.120 | |||
| INT dataSigChanAdminState | 1.3.6.1.4.1.562.2.4.1.120.103.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| dataSigChanCc | 1.3.6.1.4.1.562.2.4.1.120.2 | |||
| dataSigChanCcBch | 1.3.6.1.4.1.562.2.4.1.120.2.4 | |||
| dataSigChanCcBchBchanOpDataEntry | 1.3.6.1.4.1.562.2.4.1.120.2.4.2.1 | not-accessible | An entry in the dataSigChanCcBchBchanOpDataTable. | |
| dataSigChanCcBchBchanOpDataTable | 1.3.6.1.4.1.562.2.4.1.120.2.4.2 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational data of a B-Channel. | |
| STR dataSigChanCcBchCallingPartyNumber | 1.3.6.1.4.1.562.2.4.1.120.2.4.2.1.2 | DigitString | read-only | This attribute indicates the calling party number of the last valid call request for this channel. |
| STR dataSigChanCcBchComponentName | 1.3.6.1.4.1.562.2.4.1.120.2.4.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| I32 dataSigChanCcBchIndex | 1.3.6.1.4.1.562.2.4.1.120.2.4.1.1.10 | Integer32 | not-accessible | This variable represents the index for the dataSigChanCcBch tables. |
| INT dataSigChanCcBchLastQ931ClearCause | 1.3.6.1.4.1.562.2.4.1.120.2.4.2.1.3 | INTEGER | read-only | The clear cause of the last call on this B-channel. |
| ROW dataSigChanCcBchRowStatus | 1.3.6.1.4.1.562.2.4.1.120.2.4.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of dataSigChanCcBch components. These components cannot be added nor deleted. |
| dataSigChanCcBchRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.120.2.4.1.1 | not-accessible | A single entry in the table represents a single dataSigChanCcBch component. | |
| dataSigChanCcBchRowStatusTable | 1.3.6.1.4.1.562.2.4.1.120.2.4.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of dataSigChanCcBch components. | |
| STR dataSigChanCcBchRunningApplication | 1.3.6.1.4.1.562.2.4.1.120.2.4.2.1.4 | AsciiString | read-only | The name of the application running on this B-channel. |
| INT dataSigChanCcBchState | 1.3.6.1.4.1.562.2.4.1.120.2.4.2.1.1 | INTEGER | read-only | This attribute indicates the state of the B-channel. A B-channel is in idle state when it is available for a call. The busy state indicate that the B-channel is presently in use. The disabled state means that the access service is not enabled because it is locked or the port is down. The state noProtocolProvisioned means that the call control did not yet received the registration for this B-channel. |
| STO dataSigChanCcBchStorageType | 1.3.6.1.4.1.562.2.4.1.120.2.4.1.1.4 | StorageType | read-only | This variable represents the storage type value for the dataSigChanCcBch tables. |
| dataSigChanCcCg | 1.3.6.1.4.1.562.2.4.1.120.2.2 | |||
| dataSigChanCcCgBch | 1.3.6.1.4.1.562.2.4.1.120.2.2.3 | |||
| dataSigChanCcCgBchBchanOpDataEntry | 1.3.6.1.4.1.562.2.4.1.120.2.2.3.2.1 | not-accessible | An entry in the dataSigChanCcCgBchBchanOpDataTable. | |
| dataSigChanCcCgBchBchanOpDataTable | 1.3.6.1.4.1.562.2.4.1.120.2.2.3.2 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational data of a B-Channel. | |
| STR dataSigChanCcCgBchCallingPartyNumber | 1.3.6.1.4.1.562.2.4.1.120.2.2.3.2.1.2 | DigitString | read-only | This attribute indicates the calling party number of the last valid call request for this channel. |
| STR dataSigChanCcCgBchComponentName | 1.3.6.1.4.1.562.2.4.1.120.2.2.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| I32 dataSigChanCcCgBchIndex | 1.3.6.1.4.1.562.2.4.1.120.2.2.3.1.1.10 | Integer32 | not-accessible | This variable represents the index for the dataSigChanCcCgBch tables. |
| INT dataSigChanCcCgBchLastQ931ClearCause | 1.3.6.1.4.1.562.2.4.1.120.2.2.3.2.1.3 | INTEGER | read-only | The clear cause of the last call on this B-channel. |
| ROW dataSigChanCcCgBchRowStatus | 1.3.6.1.4.1.562.2.4.1.120.2.2.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of dataSigChanCcCgBch components. These components cannot be added nor deleted. |
| dataSigChanCcCgBchRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.120.2.2.3.1.1 | not-accessible | A single entry in the table represents a single dataSigChanCcCgBch component. | |
| dataSigChanCcCgBchRowStatusTable | 1.3.6.1.4.1.562.2.4.1.120.2.2.3.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of dataSigChanCcCgBch components. | |
| STR dataSigChanCcCgBchRunningApplication | 1.3.6.1.4.1.562.2.4.1.120.2.2.3.2.1.4 | AsciiString | read-only | The name of the application running on this B-channel. |
| INT dataSigChanCcCgBchState | 1.3.6.1.4.1.562.2.4.1.120.2.2.3.2.1.1 | INTEGER | read-only | This attribute indicates the state of the B-channel. A B-channel is in idle state when it is available for a call. The busy state indicate that the B-channel is presently in use. The disabled state means that the access service is not enabled because it is locked or the port is down. The state noProtocolProvisioned means that the call control did not yet received the registration for this B-channel. |
| STO dataSigChanCcCgBchStorageType | 1.3.6.1.4.1.562.2.4.1.120.2.2.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the dataSigChanCcCgBch tables. |
| INT dataSigChanCcCgBusyChannelCount | 1.3.6.1.4.1.562.2.4.1.120.2.2.12.1.5 | INTEGER | read-only | This attribute shows the number of B-Channels in this channel group that are in busy state. |
| dataSigChanCcCgCgpn | 1.3.6.1.4.1.562.2.4.1.120.2.2.2 | |||
| STR dataSigChanCcCgCgpnComponentName | 1.3.6.1.4.1.562.2.4.1.120.2.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STR dataSigChanCcCgCgpnIndex | 1.3.6.1.4.1.562.2.4.1.120.2.2.2.1.1.10 | DigitString | not-accessible | This variable represents the index for the dataSigChanCcCgCgpn tables. |
| ROW dataSigChanCcCgCgpnRowStatus | 1.3.6.1.4.1.562.2.4.1.120.2.2.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of dataSigChanCcCgCgpn components. These components can be added and deleted. |
| dataSigChanCcCgCgpnRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.120.2.2.2.1.1 | not-accessible | A single entry in the table represents a single dataSigChanCcCgCgpn component. | |
| dataSigChanCcCgCgpnRowStatusTable | 1.3.6.1.4.1.562.2.4.1.120.2.2.2.1 | not-accessible | This entry controls the addition and deletion of dataSigChanCcCgCgpn components. | |
| STO dataSigChanCcCgCgpnStorageType | 1.3.6.1.4.1.562.2.4.1.120.2.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the dataSigChanCcCgCgpn tables. |
| INT dataSigChanCcCgChannelAssignmentOrder | 1.3.6.1.4.1.562.2.4.1.120.2.2.11.1.3 | INTEGER | read-write | This attribute defines the order (ascending or descending) in which the B-Channels are allocated. This attribute is used only when it is not signalled in the call setup message. |
| OCT dataSigChanCcCgChannelList | 1.3.6.1.4.1.562.2.4.1.120.2.2.11.1.4 | OCTET STRING | read-write | This attribute contains the list of B-Channel numbers forming the channel group. At least one channel must be specified. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31) |
| dataSigChanCcCgCidDataEntry | 1.3.6.1.4.1.562.2.4.1.120.2.2.10.1 | not-accessible | An entry in the dataSigChanCcCgCidDataTable. | |
| dataSigChanCcCgCidDataTable | 1.3.6.1.4.1.562.2.4.1.120.2.2.10 | not-accessible | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. | |
| STR dataSigChanCcCgCommentText | 1.3.6.1.4.1.562.2.4.1.120.2.2.11.1.1 | AsciiString | read-write | This attribute specifies the name of the customer that is using this ChannelGroup. Typical use of this attribute is to store customer name. |
| STR dataSigChanCcCgComponentName | 1.3.6.1.4.1.562.2.4.1.120.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| U32 dataSigChanCcCgCustomerIdentifier | 1.3.6.1.4.1.562.2.4.1.120.2.2.10.1.1 | Unsigned32 | read-write | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers. |
| INT dataSigChanCcCgIdleChannelCount | 1.3.6.1.4.1.562.2.4.1.120.2.2.12.1.4 | INTEGER | read-only | This attribute shows the number of B-channels in the channel group that are in idle state. |
| I32 dataSigChanCcCgIndex | 1.3.6.1.4.1.562.2.4.1.120.2.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the dataSigChanCcCg tables. |
| dataSigChanCcCgProvEntry | 1.3.6.1.4.1.562.2.4.1.120.2.2.11.1 | not-accessible | An entry in the dataSigChanCcCgProvTable. | |
| dataSigChanCcCgProvTable | 1.3.6.1.4.1.562.2.4.1.120.2.2.11 | not-accessible | This group defines the call admission parameters applied to the group of B-Channels. | |
| U32 dataSigChanCcCgRejectedNoChanAvail | 1.3.6.1.4.1.562.2.4.1.120.2.2.12.1.3 | Unsigned32 | read-only | This attribute counts the number of rejected call because no channel were available under the selected channel group. This counter wraps to zero after reaching its maximum value. DESCRIPTION |
| ROW dataSigChanCcCgRowStatus | 1.3.6.1.4.1.562.2.4.1.120.2.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of dataSigChanCcCg components. These components can be added and deleted. |
| dataSigChanCcCgRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.120.2.2.1.1 | not-accessible | A single entry in the table represents a single dataSigChanCcCg component. | |
| dataSigChanCcCgRowStatusTable | 1.3.6.1.4.1.562.2.4.1.120.2.2.1 | not-accessible | This entry controls the addition and deletion of dataSigChanCcCg components. | |
| OCT dataSigChanCcCgScreeningIndicator | 1.3.6.1.4.1.562.2.4.1.120.2.2.11.1.2 | OCTET STRING | read-write | This attribute defines the acceptable set of screening modes. The screening mode is carried by the Calling Party Number information element (IE) of the B-Channel request packet. There are four types of mode: upns - User provided, not screened upvp - User provided, verified and passed upvf - User provided, verified and failed np - Network provided When a call is received with a screening indicator not provisioned in the list, the call is cleared. Description of bits: upns(0) upvp(1) upvf(2) np(3) |
| dataSigChanCcCgStatsEntry | 1.3.6.1.4.1.562.2.4.1.120.2.2.12.1 | not-accessible | An entry in the dataSigChanCcCgStatsTable. | |
| dataSigChanCcCgStatsTable | 1.3.6.1.4.1.562.2.4.1.120.2.2.12 | not-accessible | This group contains the statistics for a ChannelGroup | |
| STO dataSigChanCcCgStorageType | 1.3.6.1.4.1.562.2.4.1.120.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the dataSigChanCcCg tables. |
| U32 dataSigChanCcCgSuccessfullInCalls | 1.3.6.1.4.1.562.2.4.1.120.2.2.12.1.2 | Unsigned32 | read-only | This attribute counts the number of valid incoming calls for this channelGroup. This counter wraps to zero after reaching its maximum value. DESCRIPTION |
| U32 dataSigChanCcCgTotalInCalls | 1.3.6.1.4.1.562.2.4.1.120.2.2.12.1.1 | Unsigned32 | read-only | This attribute counts the total number of incoming calls (with valid mandatory IE contents and received in a valid ISDN state) from the interface for this channelGroup. This counter wraps to zero after reaching its maximum value. |
| STR dataSigChanCcComponentName | 1.3.6.1.4.1.562.2.4.1.120.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| U32 dataSigChanCcInChannelBusy | 1.3.6.1.4.1.562.2.4.1.120.2.10.1.6 | Unsigned32 | read-only | This attribute counts the number of valid incoming calls rejected due to no available B-Channels. This counter wraps to zero after reaching its maximum value. |
| NON dataSigChanCcIndex | 1.3.6.1.4.1.562.2.4.1.120.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the dataSigChanCc tables. |
| U32 dataSigChanCcInInvalidCapability | 1.3.6.1.4.1.562.2.4.1.120.2.10.1.3 | Unsigned32 | read-only | This attribute counts the number of valid incoming calls rejected due to an unsupported service capability, such as Information Transfer Rate, Class of Service, Protocol Standard. This counter wraps to zero after reaching its maximum value. |
| U32 dataSigChanCcInInvalidCgpn | 1.3.6.1.4.1.562.2.4.1.120.2.10.1.5 | Unsigned32 | read-only | This attribute counts the number of valid incoming calls rejected due to the calling party number not beeing provisioned in any channelGroup component of this call control. This counter wraps to zero after reaching its maximum value. |
| U32 dataSigChanCcInInvalidScreen | 1.3.6.1.4.1.562.2.4.1.120.2.10.1.4 | Unsigned32 | read-only | This attribute counts the number of valid incoming calls rejected due to a screening indicator value not provisioned in the channel group's screeningIndicator attribute. This counter wraps to zero after reaching its maximum value. |
| INT dataSigChanCcLastClearCause | 1.3.6.1.4.1.562.2.4.1.120.2.10.1.7 | INTEGER | read-only | This attribute indicates the Q931 clear cause of the last valid call that is rejected or cleared. |
| STR dataSigChanCcLastClearedCallingPartyNumber | 1.3.6.1.4.1.562.2.4.1.120.2.10.1.8 | DigitString | read-only | This attribute shows the calling party number of the last valid call that is rejected or cleared. |
| ROW dataSigChanCcRowStatus | 1.3.6.1.4.1.562.2.4.1.120.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of dataSigChanCc components. These components cannot be added nor deleted. |
| dataSigChanCcRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.120.2.1.1 | not-accessible | A single entry in the table represents a single dataSigChanCc component. | |
| dataSigChanCcRowStatusTable | 1.3.6.1.4.1.562.2.4.1.120.2.1 | not-accessible | This entry controls the addition and deletion of dataSigChanCc components. | |
| dataSigChanCcStatsEntry | 1.3.6.1.4.1.562.2.4.1.120.2.10.1 | not-accessible | An entry in the dataSigChanCcStatsTable. | |
| dataSigChanCcStatsTable | 1.3.6.1.4.1.562.2.4.1.120.2.10 | not-accessible | This group contains the statistics of the CallControl | |
| STO dataSigChanCcStorageType | 1.3.6.1.4.1.562.2.4.1.120.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the dataSigChanCc tables. |
| U32 dataSigChanCcSuccessfullInCalls | 1.3.6.1.4.1.562.2.4.1.120.2.10.1.2 | Unsigned32 | read-only | This attribute counts the total number of successfull valid incoming calls from the interface. Unsuccessful calls include those that have disallowed Capability (BC, LLC), screening indicator, or calling party number, and calls that are rejected due to requested channel busy. This counter wraps to zero after reaching its maximum value. |
| U32 dataSigChanCcTotalValidInCalls | 1.3.6.1.4.1.562.2.4.1.120.2.10.1.1 | Unsigned32 | read-only | This attribute counts the total number of incoming calls (with valid mandatory IE contents and received in a valid ISDN state) from the interface. This counter wraps to zero after reaching its maximum value. |
| dataSigChanCcTr | 1.3.6.1.4.1.562.2.4.1.120.2.3 | |||
| STR dataSigChanCcTrComponentName | 1.3.6.1.4.1.562.2.4.1.120.2.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| NON dataSigChanCcTrIndex | 1.3.6.1.4.1.562.2.4.1.120.2.3.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the dataSigChanCcTr tables. |
| dataSigChanCcTrPri | 1.3.6.1.4.1.562.2.4.1.120.2.3.2 | |||
| dataSigChanCcTrPriBch | 1.3.6.1.4.1.562.2.4.1.120.2.3.2.2 | |||
| STR dataSigChanCcTrPriBchComponentName | 1.3.6.1.4.1.562.2.4.1.120.2.3.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| I32 dataSigChanCcTrPriBchIndex | 1.3.6.1.4.1.562.2.4.1.120.2.3.2.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the dataSigChanCcTrPriBch tables. |
| ROW dataSigChanCcTrPriBchRowStatus | 1.3.6.1.4.1.562.2.4.1.120.2.3.2.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of dataSigChanCcTrPriBch components. These components cannot be added nor deleted. |
| dataSigChanCcTrPriBchRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.120.2.3.2.2.1.1 | not-accessible | A single entry in the table represents a single dataSigChanCcTrPriBch component. | |
| dataSigChanCcTrPriBchRowStatusTable | 1.3.6.1.4.1.562.2.4.1.120.2.3.2.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of dataSigChanCcTrPriBch components. | |
| STO dataSigChanCcTrPriBchStorageType | 1.3.6.1.4.1.562.2.4.1.120.2.3.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the dataSigChanCcTrPriBch tables. |
| STR dataSigChanCcTrPriComponentName | 1.3.6.1.4.1.562.2.4.1.120.2.3.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| I32 dataSigChanCcTrPriIndex | 1.3.6.1.4.1.562.2.4.1.120.2.3.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the dataSigChanCcTrPri tables. |
| ROW dataSigChanCcTrPriRowStatus | 1.3.6.1.4.1.562.2.4.1.120.2.3.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of dataSigChanCcTrPri components. These components cannot be added nor deleted. |
| dataSigChanCcTrPriRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.120.2.3.2.1.1 | not-accessible | A single entry in the table represents a single dataSigChanCcTrPri component. | |
| dataSigChanCcTrPriRowStatusTable | 1.3.6.1.4.1.562.2.4.1.120.2.3.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of dataSigChanCcTrPri components. | |
| STO dataSigChanCcTrPriStorageType | 1.3.6.1.4.1.562.2.4.1.120.2.3.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the dataSigChanCcTrPri tables. |
| ROW dataSigChanCcTrRowStatus | 1.3.6.1.4.1.562.2.4.1.120.2.3.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of dataSigChanCcTr components. These components can be added and deleted. |
| dataSigChanCcTrRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.120.2.3.1.1 | not-accessible | A single entry in the table represents a single dataSigChanCcTr component. | |
| dataSigChanCcTrRowStatusTable | 1.3.6.1.4.1.562.2.4.1.120.2.3.1 | not-accessible | This entry controls the addition and deletion of dataSigChanCcTr components. | |
| STO dataSigChanCcTrStorageType | 1.3.6.1.4.1.562.2.4.1.120.2.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the dataSigChanCcTr tables. |
| dataSigChanCidDataEntry | 1.3.6.1.4.1.562.2.4.1.120.101.1 | not-accessible | An entry in the dataSigChanCidDataTable. | |
| dataSigChanCidDataTable | 1.3.6.1.4.1.562.2.4.1.120.101 | not-accessible | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. | |
| STR dataSigChanCommentText | 1.3.6.1.4.1.562.2.4.1.120.100.1.1 | AsciiString | read-write | This attribute specifies the name of the customer that is using this DataSigChan. Typical use of this attribute is to store customer name. |
| STR dataSigChanComponentName | 1.3.6.1.4.1.562.2.4.1.120.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| U32 dataSigChanCustomerIdentifier | 1.3.6.1.4.1.562.2.4.1.120.101.1.1 | Unsigned32 | read-write | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers. |
| INT dataSigChanIfAdminStatus | 1.3.6.1.4.1.562.2.4.1.120.102.1.1 | INTEGER | read-write | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed. |
| dataSigChanIfEntryEntry | 1.3.6.1.4.1.562.2.4.1.120.102.1 | not-accessible | An entry in the dataSigChanIfEntryTable. | |
| dataSigChanIfEntryTable | 1.3.6.1.4.1.562.2.4.1.120.102 | not-accessible | This group contains the provisionable attributes for the ifEntry. | |
| NUM dataSigChanIfIndex | 1.3.6.1.4.1.562.2.4.1.120.102.1.2 | InterfaceIndex | read-only | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| I32 dataSigChanIndex | 1.3.6.1.4.1.562.2.4.1.120.1.1.10 | Integer32 | not-accessible | This variable represents the index for the dataSigChan tables. |
| INT dataSigChanOperationalState | 1.3.6.1.4.1.562.2.4.1.120.103.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| dataSigChanOperStatusEntry | 1.3.6.1.4.1.562.2.4.1.120.104.1 | not-accessible | An entry in the dataSigChanOperStatusTable. | |
| dataSigChanOperStatusTable | 1.3.6.1.4.1.562.2.4.1.120.104 | not-accessible | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. | |
| dataSigChanProvEntry | 1.3.6.1.4.1.562.2.4.1.120.100.1 | not-accessible | An entry in the dataSigChanProvTable. | |
| dataSigChanProvTable | 1.3.6.1.4.1.562.2.4.1.120.100 | not-accessible | This group represents the provisionable attributes of a DataSigChan. | |
| ROW dataSigChanRowStatus | 1.3.6.1.4.1.562.2.4.1.120.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of dataSigChan components. These components can be added and deleted. |
| dataSigChanRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.120.1.1 | not-accessible | A single entry in the table represents a single dataSigChan component. | |
| dataSigChanRowStatusTable | 1.3.6.1.4.1.562.2.4.1.120.1 | not-accessible | This entry controls the addition and deletion of dataSigChan components. | |
| INT dataSigChanSnmpOperStatus | 1.3.6.1.4.1.562.2.4.1.120.104.1.1 | INTEGER | read-only | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed. |
| dataSigChanStateEntry | 1.3.6.1.4.1.562.2.4.1.120.103.1 | not-accessible | An entry in the dataSigChanStateTable. | |
| dataSigChanStateTable | 1.3.6.1.4.1.562.2.4.1.120.103 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| STO dataSigChanStorageType | 1.3.6.1.4.1.562.2.4.1.120.1.1.4 | StorageType | read-only | This variable represents the storage type value for the dataSigChan tables. |
| INT dataSigChanUsageState | 1.3.6.1.4.1.562.2.4.1.120.103.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
RFC description
Nortel Magellan Passport platform management for data ISDN services.
Start monitoring Nortel Magellan Passport WAN switch / ISDN access node with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.