All MIBs › MICOM-4400-VOICE-NETWORK-MIB
Category: Telephony/VoIP
Description: Manages voice network circuit configuration and call statistics on Micom 4400 systems.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MICOM-4400-VOICE-NETWORK-MIB?
MICOM-4400-VOICE-NETWORK-MIB is a MICOM Communications (network/VPN configuration hardware, 4400-series VNET voice-network multiplexer) proprietary MIB configuring voice-channel and profile parameters. Its channel-configuration table, keyed by LIM/channel ID, records voice/switching profile assignment and interface type, while a profile-configuration table records mode, digitizing rate, input-gain/output-attenuation levels, busy-out mode, bandwidth, background setting, BRI pulse rate, E&M/FXS/DVM signaling format, ring count, E&M analog operation, ringing frequency, and fax digitizing rate. As a configuration MIB it lets an administrator confirm voice-channel codec/signaling settings on a MICOM 4400 VNET multiplexer. It is deployed on MICOM 4400 VNET voice-network multiplexer equipment. Engineers can download the MICOM-4400-VOICE-NETWORK-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in MICOM-4400-VOICE-NETWORK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- MICOM 4400 VNET voice-network multiplexer equipment
Monitoring Examples
An administrator checks mcmVNETProfileCfgDigitizingRate and mcmVNETProfileCfgFXSSigFormat to confirm voice-channel codec and signaling configuration on a MICOM 4400 VNET multiplexer.
What Can Be Monitored
- voice-channel codec and signaling configuration
This MIB depends on
Related MIBs
Imported Objects
From MICOM-OSCAR-MIB
| micom-oscar |
From MICOM-SYS-MIB
| mcmSysAsciiTimeOfDay | OBJECT-TYPE |
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| micom_2vnet | 1.3.6.1.4.1.335.1.4.21 | |||
| NTF mcmVNETDownloadFail | 1.3.6.1.4.1.335.1.4.21.0.1 | NAME = ; DESC = Indicates that a failure occurred while \ downloading the voice image.\ Severity Level: MAJOR.; HELP = Downloading the voice image failed. Retry again, and if problem \ persists, please contact system admin., or field \ Personnel.; | ||
| NTF mcmVNETOutOfOrder | 1.3.6.1.4.1.335.1.4.21.0.2 | NAME = ; DESC = Indicates that the DSP is not running. \ A channel reset may be required.; HELP = DSP is not running. Reset voice channel(s). If problem still exist, \ contact sys admin. or Field Personnel.; | ||
| NTF mcmVNETOutOfOrderRecovered | 1.3.6.1.4.1.335.1.4.21.0.3 | NAME = ; DESC = Indicates recovery from the out of order condition.\ Severity Level: CRITICAL.; HELP = DSP is running. Normal status indication.; | ||
| NTF mcmVNETFailedToSyncUp | 1.3.6.1.4.1.335.1.4.21.0.4 | NAME = ; DESC = Indicates that the DSP is running, \ but unable to sync up. A channel reset \ may be required.\ Severity Level: MAJOR.; HELP = Reset channel(s). If Synchronization is not acquired, \ contact sys admin., or Field Personnel.; | ||
| NTF mcmVNETFailedToSyncUpRecovered | 1.3.6.1.4.1.335.1.4.21.0.5 | NAME = ; DESC = Indicates recovery from the failure to \ sync up condition.\ Severity Level: INFORMATIVE. ; HELP = Synchronization is acquired. Normal Status Indicator.; | ||
| NTF mcmVNETNoCVMCodeImage | 1.3.6.1.4.1.335.1.4.21.0.6 | NAME = ; DESC = Indicates that the built image doesn't \ contain CVM code\ Severity Level: MAJOR.; HELP = Access device code does not contain image for CVM module. \ Please contact Sys Admin., or Field Personnel. ; | ||
| NTF mcmVNETNoTUVMCodeImage | 1.3.6.1.4.1.335.1.4.21.0.7 | NAME = ; DESC = Indicates that the built image doesn't \ contain TUVM code.\ Severity Level: MAJOR.; HELP = Access device code does not contain image for TUVM module. \ Please contact Sys Admin., or Field Personnel. ; | ||
| NTF mcmVNETNoDVMCodeImage | 1.3.6.1.4.1.335.1.4.21.0.8 | NAME = ; DESC = Indicates that the built image doesn't \ contain DVM code.\ Severity Level: MAJOR.; HELP = Access device code does not contain image for DVM module. \ Please contact Sys Admin., or Field Personnel. ; | ||
| vnet_configuration | 1.3.6.1.4.1.335.1.4.21.1 | |||
| mcmVNETChCfgTable | 1.3.6.1.4.1.335.1.4.21.1.1 | not-accessible | NAME = ; DESC = The VNET Voice Channel Configuration table. \ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmVNETChCfgEntry | 1.3.6.1.4.1.335.1.4.21.1.1.1 | not-accessible | NAME = ; DESC = An entry in the VNET Voice Channel Configuration \ table. (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcmVNETChCfgLimID | 1.3.6.1.4.1.335.1.4.21.1.1.1.1 | INTEGER | read-only | NAME = ; DESC = The card lim (logical interface module) number of a \ particular voice channel. Used as an index to the \ VNET Voice Channel Configuration table. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETChCfgChannelID | 1.3.6.1.4.1.335.1.4.21.1.1.1.2 | INTEGER | read-only | NAME = ; DESC = The position of the voice channel in the lim. \ Used as an index to the VNET Voice \ Channel Configuration table. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETChCfgVoiceProfile | 1.3.6.1.4.1.335.1.4.21.1.1.1.3 | INTEGER | read-write | NAME = ; DESC = The value of this object indicates the profile \ to be used to configure the specified voice \ channel. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETChCfgSwitchingProfile | 1.3.6.1.4.1.335.1.4.21.1.1.1.4 | INTEGER | read-write | NAME = ; DESC = The value of this object indicates the profile \ to be used for a switching call. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETChCfgInterfaceType | 1.3.6.1.4.1.335.1.4.21.1.1.1.5 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the interface \ type of the specified voice channel. (Operational); HELP = Upon powerup, the interface type will not be \ available until the DSP software is loaded and its \ status is reported.; CAPABILITIES = ; |
| mcmVNETProfileCfgTable | 1.3.6.1.4.1.335.1.4.21.1.2 | not-accessible | NAME = ; DESC = The VNET Voice Profile Configuration table. \ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmVNETProfileCfgEntry | 1.3.6.1.4.1.335.1.4.21.1.2.1 | not-accessible | NAME = ; DESC = An entry in the VNET Voice Profile Configuration \ table. (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcmVNETProfileCfgProfileNum | 1.3.6.1.4.1.335.1.4.21.1.2.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the profile \ number. Used as an index to the VNET Voice \ Profile Configuration table. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgMode | 1.3.6.1.4.1.335.1.4.21.1.2.1.2 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the voice \ channel signal processing. (Operational); HELP = Can be used to set to either dual mode with \ both voice and fax, or just voice.; CAPABILITIES = ; |
| INT mcmVNETProfileCfgDigitizingRate | 1.3.6.1.4.1.335.1.4.21.1.2.1.3 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the voice \ digitizing algorithm. (Operational); HELP = Rate at which voice is digitized in \ designated in bits per second.; CAPABILITIES = ; |
| INT mcmVNETProfileCfgInputLevelGain | 1.3.6.1.4.1.335.1.4.21.1.2.1.4 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the input \ signal gain in dB. (Operational); HELP = For DVM, max value is 8 dB. If more than \ 8 dB is configured, 8 dB will be used. \ The range for the BRI card is -15 to 15 dB.; CAPABILITIES = ; |
| INT mcmVNETProfileCfgOutputLevelAttn | 1.3.6.1.4.1.335.1.4.21.1.2.1.5 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the output \ signal attenuation in dB. (Operational); HELP = For DVM, max value is 8 dB. If more than \ 8 dB is configured, 8 dB will be used. \ The range for the BRI card is -15 to 15dB.; CAPABILITIES = ; |
| INT mcmVNETProfileCfgBusyOutMode | 1.3.6.1.4.1.335.1.4.21.1.2.1.6 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the voice \ channel busy out control type. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgBandwidth | 1.3.6.1.4.1.335.1.4.21.1.2.1.7 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the voice \ channel link bandwidth reservation style. \ (Operational); HELP = 2 is used for forced connects or PVCs only. \ 1 is used for switched connects.; CAPABILITIES = ; |
| INT mcmVNETProfileCfgBackground | 1.3.6.1.4.1.335.1.4.21.1.2.1.8 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the voice \ channel background noise generation type. \ (Operational); HELP = The ability of passing background noise or \ silencing the channel during idle periods. \ First option allows the background noise to be \ regenerated during the periods, whereas the \ second option suppresses background noise during \ idle periods.; CAPABILITIES = ; |
| INT mcmVNETProfileCfgBRIPulseRate | 1.3.6.1.4.1.335.1.4.21.1.2.1.9 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the voice \ channel pulse rate in pulses per second. \ (Operational); HELP = NOTE: This object is used by the Partner card \ and not for the ISDN BRI voice card.; CAPABILITIES = ; |
| INT mcmVNETProfileCfgEMSigFormat | 1.3.6.1.4.1.335.1.4.21.1.2.1.10 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the voice \ channel E&M signaling format. (Operational); HELP = 2 and 3 are used for force connects only. \ 1 (DC) is used for switched connects.; CAPABILITIES = ; |
| INT mcmVNETProfileCfgFXSSigFormat | 1.3.6.1.4.1.335.1.4.21.1.2.1.11 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the voice \ channel FXS signaling format. (Operational); HELP = 1 is used for force connects only. \ 2 is used for switched connects.; CAPABILITIES = ; |
| INT mcmVNETProfileCfgDVMSigFormat | 1.3.6.1.4.1.335.1.4.21.1.2.1.12 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the voice \ channel DVM signaling format. (Operational); HELP = 3 and 4 are used for force connects only. \ 1 is used for switched connects.; CAPABILITIES = ; |
| INT mcmVNETProfileCfgNumberOfRings | 1.3.6.1.4.1.335.1.4.21.1.2.1.13 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies when the \ voice channel (FXO or 3-port) will answer \ the call request. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgEMAnalOper | 1.3.6.1.4.1.335.1.4.21.1.2.1.14 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the E&M \ voice channel operation as either 2 or 4 wire \ operation. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgRingingFreq | 1.3.6.1.4.1.335.1.4.21.1.2.1.15 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the voice \ channel (FXS or 3-port) ringing frequency. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgFaxDigRate | 1.3.6.1.4.1.335.1.4.21.1.2.1.16 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the voice \ channel Fax digitizing rate in bits per second. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgDiscSupervision | 1.3.6.1.4.1.335.1.4.21.1.2.1.17 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the voice \ channel method to detect the line disconnect. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgLineImpedance | 1.3.6.1.4.1.335.1.4.21.1.2.1.18 | INTEGER | read-write | NAME = ; DESC = The value of this object selects the voice \ channel type of line impedance. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgMaxOutputLevel | 1.3.6.1.4.1.335.1.4.21.1.2.1.19 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the voice \ channel maximum output level. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgRegenDelay | 1.3.6.1.4.1.335.1.4.21.1.2.1.20 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the voice \ channel time (in seconds) to delay before dialing \ out the number (i.e., time to wait for dial tone). \ (Operational); HELP = NOTE: This object is not required for the ISDN BRI \ voice card; CAPABILITIES = ; |
| INT mcmVNETProfileCfgDialDigTimeLimit | 1.3.6.1.4.1.335.1.4.21.1.2.1.21 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the voice \ channel inter-digit time-out time (in seconds). \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgMaxNumForDig | 1.3.6.1.4.1.335.1.4.21.1.2.1.22 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the voice \ channel maximum number of digits that can \ be dialed. (Operational); HELP = 0 is used for auto-call functionality.; CAPABILITIES = ; |
| INT mcmVNETProfileCfgRegenFormat | 1.3.6.1.4.1.335.1.4.21.1.2.1.23 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the voice \ channel dial digit regeneration format. \ (Operational); HELP = NOTE: This object is not required for the ISDN \ BRI voice card.; CAPABILITIES = ; |
| INT mcmVNETProfileCfgCallProgTone | 1.3.6.1.4.1.335.1.4.21.1.2.1.24 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the voice \ channel call progress tone required for different \ countries or areas. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgDTMFDetector | 1.3.6.1.4.1.335.1.4.21.1.2.1.25 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies to the voice \ channel whether to turn on or off the DTMF \ detector. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgJitters | 1.3.6.1.4.1.335.1.4.21.1.2.1.26 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the voice \ channel maximum jitters delay (in milliseconds). \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgEchoCanceller | 1.3.6.1.4.1.335.1.4.21.1.2.1.27 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies to the voice \ channel whether to turn on or off the echo \ canceller. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgAutoGainControl | 1.3.6.1.4.1.335.1.4.21.1.2.1.28 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies to the voice \ channel whether to automatically set the input \ signal level. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgCompanderFormat | 1.3.6.1.4.1.335.1.4.21.1.2.1.29 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the voice \ channel (DVM or BRI) compander type. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgPremiumVoice | 1.3.6.1.4.1.335.1.4.21.1.2.1.30 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies to the voice \ channel (DVM) whether to enable or disable the \ transparent voice (no compression) algorithm. \ (Operational); HELP = This object is also used by the ISDN BRI voice card \ to enable/disable Digital Lossless Switching Pattern \ Generation and Pattern Search.; CAPABILITIES = ; |
| INT mcmVNETProfileCfgEndOfDialChar | 1.3.6.1.4.1.335.1.4.21.1.2.1.31 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies to the voice \ channel whether '#' is used to end a dialing input. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgBckGrndNoiseLevel | 1.3.6.1.4.1.335.1.4.21.1.2.1.32 | INTEGER | read-write | NAME = ; DESC = Signal input above this level is considered\ a voiced signal, below this level, the \ Voice Activity Detector (VAD), will \ determine if it is a voiced signal or \ background noise. (Operational); HELP = Refer to the International \ Telecommunication Union(ITU-T) G.711 \ document for more information; CAPABILITIES = ; |
| INT mcmVNETProfileCfgSilenceHngOvrTime | 1.3.6.1.4.1.335.1.4.21.1.2.1.33 | INTEGER | read-write | NAME = ; DESC = Indicates the time delay to switch \ from voice to silence.\ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgIdlePattern | 1.3.6.1.4.1.335.1.4.21.1.2.1.34 | INTEGER | read-write | NAME = ; DESC = The value of this object represents the \ Idle pattern on the line when no call is up.\ Specific to a PBX. This is a permanent DSP \ configuration parameter; HELP = This value can be used to detect that a call \ has finished and that the echo canceller should \ be reset and that fax mode should be terminated.; CAPABILITIES = ; |
| INT mcmVNETProfileCfgEcanFilterLength | 1.3.6.1.4.1.335.1.4.21.1.2.1.35 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the filter \ length for echo canceller. This is a permanent \ DSP configuration parameter.; HELP = A length of 128 is equal to 16ms.\ A length of 256 is equal to 32ms.; -- NOTE: The ISDN BRI voice card supports 32ms only; CAPABILITIES = ; |
| INT mcmVNETProfileCfgEcanErlImprovement | 1.3.6.1.4.1.335.1.4.21.1.2.1.36 | INTEGER | read-write | NAME = ; DESC = The value of this object is used for echo \ canceller Er1 improvement. This is a DSP \ Dynamic configuration parameter. \ A signal will be attenuated by this dB \ amount before being passed through the \ echo canceller. After the echo canceller, \ it will be amplified by this same dB amount, \ for a net gain of 0 dB. \ This attenuation amplicfication cycle reduces \ the resolution of the signal ( -18 ..0 ).; HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgNoiseFloorOffset | 1.3.6.1.4.1.335.1.4.21.1.2.1.37 | INTEGER | read-write | NAME = ; DESC = The value of this object will suppress the \ impulsive backround noise in order to achieve \ silence suppression savings. HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgDtmfGenBurstLength | 1.3.6.1.4.1.335.1.4.21.1.2.1.38 | INTEGER | read-write | NAME = ; DESC = DTMF burst generation in milliseconds.; HELP = ; CAPABILITIES = ; |
| INT mcmVNETProfileCfgDtmRegenBurstLength | 1.3.6.1.4.1.335.1.4.21.1.2.1.39 | INTEGER | read-write | NAME = ; DESC = DTMF burst Regeneration length in milliseconds.; HELP = ; CAPABILITIES = ; |
| mcmVNETSwProfCfgTable | 1.3.6.1.4.1.335.1.4.21.1.3 | not-accessible | NAME = ; DESC = The VNET Voice Switching Profile Configuration \ table.(Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmVNETSwProfCfgEntry | 1.3.6.1.4.1.335.1.4.21.1.3.1 | not-accessible | NAME = ; DESC = An entry in the VNET Voice Switching Profile \ Configuration table. (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcmVNETSwProfCfgProfileNum | 1.3.6.1.4.1.335.1.4.21.1.3.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the profile \ number. Used as an index to the VNET Voice \ Switching Profile Configuration table. \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETSwProfCfgOutCallRestrict | 1.3.6.1.4.1.335.1.4.21.1.3.1.2 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies how to \ handle outgoing calls for voice channel \ switching. (Operational); HELP = 2: include CUG ID in outgoing call. \ 3: include restriction class in outgoing call. \ 4: include both CUG ID and restriction \ class in outgoing call. \ 5: outgoing call is not allowed.; CAPABILITIES = ; |
| INT mcmVNETSwProfCfgInCallRestrict | 1.3.6.1.4.1.335.1.4.21.1.3.1.3 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies how to \ handle incoming calls for voice channel \ switching. (Operational); HELP = 2: check CUG ID in incoming call. (Must \ match our CUG ID for call acceptance. \ 3: check RCC in incoming call. (Must be \ greater than or equal to our RCC for call \ acceptance. \ 4: check both CUG and RCC in incoming \ call. \ 5: incoming call is not allowed.; CAPABILITIES = ; |
| INT mcmVNETSwProfCfgCUGID | 1.3.6.1.4.1.335.1.4.21.1.3.1.4 | INTEGER | read-write | NAME = ; DESC = The value of this object assigns the Closed \ User Group ID for a voice channel. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETSwProfCfgRestrictClassCd | 1.3.6.1.4.1.335.1.4.21.1.3.1.5 | INTEGER | read-write | NAME = ; DESC = The value of this object assigns the Restriction \ Class Code for a voice channel. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmVNETSwProfCfgAutoCallEntNum | 1.3.6.1.4.1.335.1.4.21.1.3.1.6 | INTEGER | read-write | NAME = ; DESC = The value of this object provides a voice \ channel Auto Call destination number by \ specifying an index into the ingress table. \ (Operational); HELP = 0: auto call disabled. \ 1-32: index to the ingress table entry where \ the dial number is specified. \ The auto call for the ISDN BRI voice card is \ always disabled.; CAPABILITIES = ; |
| INT mcmVNETSwProfCfgCallNegStrategy | 1.3.6.1.4.1.335.1.4.21.1.3.1.7 | INTEGER | read-write | NAME = ; DESC = The value of this object specifies the preference \ for the voice algorithm when an outgoing call is \ made. (Operational); HELP = specific: whatever is configured. \ bandwidth: bigger block size. \ delay: shorter block size.; CAPABILITIES = ; |
| INT mcmVNETSwProfCfgTransmitPriority | 1.3.6.1.4.1.335.1.4.21.1.3.1.8 | INTEGER | read-write | NAME = ; DESC = The value of this object assigns the priority \ of the voice data to be transmitted. (Operational); HELP = 0: lowest priority. \ 15: highest priority.; CAPABILITIES = ; |
| INT mcmVNETSwProfCfgAutoCallType | 1.3.6.1.4.1.335.1.4.21.1.3.1.9 | INTEGER | read-write | NAME = ; DESC = Indicates the type of auto-call \ switching to be performed by the \ voice channel.; HELP = ; CAPABILITIES = ; |
| INT mcmVNETSwProfCfgAddServerSelect | 1.3.6.1.4.1.335.1.4.21.1.3.1.10 | INTEGER | read-write | NAME = ; DESC = Indicates which DNA server is used.; HELP = ; CAPABILITIES = ; |
| INT mcmVNETSwProfCfgOutCallMode | 1.3.6.1.4.1.335.1.4.21.1.3.1.11 | INTEGER | read-write | NAME = ; DESC = Indicates the type of call being made.; HELP = ; CAPABILITIES = ; |
| mcmVNETIngressDigFilterTable | 1.3.6.1.4.1.335.1.4.21.1.4 | not-accessible | NAME = ; DESC = The VNET Voice Ingress Digit Filtering \ Configuration table. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmVNETIngressDigFilterEntry | 1.3.6.1.4.1.335.1.4.21.1.4.1 | not-accessible | NAME = ; DESC = An entry in the VNET Voice Ingress Digit \ Filtering Configuration table. (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcmVNETIngressDigFilterIndex | 1.3.6.1.4.1.335.1.4.21.1.4.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the index to \ the ingress table. Used as an index to the VNET \ Voice Ingress Digit Filtering Configuration table. \ Operational); HELP = ; CAPABILITIES = ; |
| STR mcmVNETIngressDigFilterIngressNum | 1.3.6.1.4.1.335.1.4.21.1.4.1.2 | DisplayString | read-write | NAME = ; DESC = The value of this object selects the digit \ pattern to be matched. (Null terminated \ character string.) (Operational); HELP = Valid characters are decimal digits, '#', \ '*', '+', '[' and ']' .; CAPABILITIES = ; |
| STR mcmVNETIngressDigFilterManipString | 1.3.6.1.4.1.335.1.4.21.1.4.1.3 | DisplayString | read-write | NAME = ; DESC = The value of this object selects commands \ to produce the ingress digits for speed dial, \ call redirect, and source ID insertion features. \ (Operational); HELP = Valid characters are decimal digits, '#', \ '*', 'D', and 'I'.; CAPABILITIES = ; |
| mcmVNETEgressDigManipTable | 1.3.6.1.4.1.335.1.4.21.1.5 | not-accessible | NAME = ; DESC = The VNET Voice Egress Digit Manipulation \ Configuration table. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmVNETEgressDigManipEntry | 1.3.6.1.4.1.335.1.4.21.1.5.1 | not-accessible | NAME = ; DESC = An entry in the VNET Voice Egress Digit \ Manipulation Configuration table. (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcmVNETEgressDigManipIndex | 1.3.6.1.4.1.335.1.4.21.1.5.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the index to \ the egress table. Used as an index to the VNET \ Voice Egress Digit Manipulation Configuration \ table. Operational); HELP = ; CAPABILITIES = ; |
| STR mcmVNETEgressDigManipPhoneNum | 1.3.6.1.4.1.335.1.4.21.1.5.1.2 | DisplayString | read-write | NAME = ; DESC = The value of this object selects the phone \ number that voice channels are associated with. \ This is the number to be registered to the Address \ Server (RSA). (Operational); HELP = Valid characters are decimal digits, '#', and '*'.; CAPABILITIES = ; |
| STR mcmVNETEgressDigManipString | 1.3.6.1.4.1.335.1.4.21.1.5.1.3 | DisplayString | read-write | NAME = ; DESC = The value of this object selects commands \ to produce the egress digits for FXO, E&M, \ or FXS 3-Port interface. The result is the \ number to be sent to the connected phone \ device. (Operational); HELP = Valid characters are decimal digits, '#', '*', \ '+', 'D', 'H', and 'I'. The character 'H' is used \ used to trigger immediate dial handling by the PBX.; CAPABILITIES = ; |
| STR mcmVNETEgressDigManipChIDList | 1.3.6.1.4.1.335.1.4.21.1.5.1.4 | DisplayString | read-write | NAME = ; DESC = The value of this object selects voice channels \ associated with the phone number. The valid \ string consists of the substring 'B1'~'B6', \ 'C1'~'C12', 'D1'~'D12', and 'E1'~'E2'. \ (Operational); HELP = Valid characters are decimal digits, 'B', 'C', \ 'D', and 'E'.; CAPABILITIES = ; |
| nvmVNETChCfgTable | 1.3.6.1.4.1.335.1.4.21.1.6 | not-accessible | NAME = ; DESC = The VNET Voice Channel Configuration table. \ (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmVNETChCfgEntry | 1.3.6.1.4.1.335.1.4.21.1.6.1 | not-accessible | NAME = ; DESC = An entry in the VNET Voice Channel Configuration \ table. (Configuration); HELP = ; CAPABILITIES = ; | |
| INT nvmVNETChCfgLimID | 1.3.6.1.4.1.335.1.4.21.1.6.1.1 | INTEGER | read-only | NAME = ; DESC = The card lim (logical interface module) number of a \ particular voice channel. Used as an index to the \ VNET Voice Channel Configuration table. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETChCfgChannelID | 1.3.6.1.4.1.335.1.4.21.1.6.1.2 | INTEGER | read-only | NAME = ; DESC = The position of the voice channel in the lim. \ Used as an index to the VNET Voice \ Channel Configuration table. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETChCfgVoiceProfile | 1.3.6.1.4.1.335.1.4.21.1.6.1.3 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the profile \ to be used to configure the specified voice \ channel. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETChCfgSwitchingProfile | 1.3.6.1.4.1.335.1.4.21.1.6.1.4 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the profile \ to be used for a switching call. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETChCfgInterfaceType | 1.3.6.1.4.1.335.1.4.21.1.6.1.5 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the interface \ type of the specified voice channel. (Configuration); HELP = Upon powerup, the interface type will not be \ available until the DSP software is loaded and its \ status is reported.; CAPABILITIES = ; |
| nvmVNETProfileCfgTable | 1.3.6.1.4.1.335.1.4.21.1.7 | not-accessible | NAME = ; DESC = The VNET Voice Profile Configuration table. \ (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmVNETProfileCfgEntry | 1.3.6.1.4.1.335.1.4.21.1.7.1 | not-accessible | NAME = ; DESC = An entry in the VNET Voice Profile Configuration \ table. (Configuration); HELP = ; CAPABILITIES = ; | |
| INT nvmVNETProfileCfgProfileNum | 1.3.6.1.4.1.335.1.4.21.1.7.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the profile \ number. Used as an index to the VNET Voice \ Profile Configuration table. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgMode | 1.3.6.1.4.1.335.1.4.21.1.7.1.2 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the voice \ channel signal processing. (Configuration); HELP = Can be used to set to either dual mode with \ both voice and fax, or just voice.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgDigitizingRate | 1.3.6.1.4.1.335.1.4.21.1.7.1.3 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the voice \ digitizing algorithm. (Configuration); HELP = Rate at which voice is digitized in \ designated in bits per second.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgInputLevelGain | 1.3.6.1.4.1.335.1.4.21.1.7.1.4 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the input \ signal gain in dB. (Configuration); HELP = For DVM, max value is 8 dB. If more than \ 8 dB is configured, 8 dB will be used.\ The ISDN BRI voice card range is -15 to 15dB.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgOutputLevelAttn | 1.3.6.1.4.1.335.1.4.21.1.7.1.5 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the output \ signal attenuation in dB. (Configuration); HELP = For DVM, max value is 8 dB. If more than \ 8 dB is configured, 8 dB will be used.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgBusyOutMode | 1.3.6.1.4.1.335.1.4.21.1.7.1.6 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the voice \ channel busy out control type. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgBandwidth | 1.3.6.1.4.1.335.1.4.21.1.7.1.7 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the voice \ channel link bandwidth reservation style. \ (Configuration); HELP = 2 is used for forced connects or PVCs only. \ 1 is used for switched connects.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgBackground | 1.3.6.1.4.1.335.1.4.21.1.7.1.8 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the voice \ channel background noise generation type. \ (Configuration); HELP = The ability of passing background noise or \ silencing the channel during idle periods. \ First option allows the background noise to be \ regenerated during the periods, whereas the \ second option suppresses background noise during \ idle periods.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgBRIPulseRate | 1.3.6.1.4.1.335.1.4.21.1.7.1.9 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the voice \ channel pulse rate in pulses per second. \ (Configuration); HELP = NOTE: This object is used by the Partner Card, \ not by the ISDN BRI voice card.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgEMSigFormat | 1.3.6.1.4.1.335.1.4.21.1.7.1.10 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the voice \ channel E&M signaling format. (Configuration); HELP = 2 and 3 are used for force connects only. \ 1 (DC) is used for switched connects.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgFXSSigFormat | 1.3.6.1.4.1.335.1.4.21.1.7.1.11 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the voice \ channel FXS signaling format. (Configuration); HELP = 1 is used for force connects only. \ 2 is used for switched connects.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgDVMSigFormat | 1.3.6.1.4.1.335.1.4.21.1.7.1.12 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the voice \ channel DVM signaling format. (Configuration); HELP = 3 and 4 are used for force connects only. \ 1 is used for switched connects.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgNumberOfRings | 1.3.6.1.4.1.335.1.4.21.1.7.1.13 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies when the \ voice channel (FXO or 3-port) will answer \ the call request. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgEMAnalOper | 1.3.6.1.4.1.335.1.4.21.1.7.1.14 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the E&M \ voice channel operation as either 2 or 4 wire \ operation. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgRingingFreq | 1.3.6.1.4.1.335.1.4.21.1.7.1.15 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the voice \ channel (FXS or 3-port) ringing frequency. \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgFaxDigRate | 1.3.6.1.4.1.335.1.4.21.1.7.1.16 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the voice \ channel Fax digitizing rate in bits per second. \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgDiscSupervision | 1.3.6.1.4.1.335.1.4.21.1.7.1.17 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the voice \ channel method to detect the line disconnect. \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgLineImpedance | 1.3.6.1.4.1.335.1.4.21.1.7.1.18 | INTEGER | read-only | NAME = ; DESC = The value of this object selects the voice \ channel type of line impedance. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgMaxOutputLevel | 1.3.6.1.4.1.335.1.4.21.1.7.1.19 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the voice \ channel maximum output level. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgRegenDelay | 1.3.6.1.4.1.335.1.4.21.1.7.1.20 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the voice \ channel time (in seconds) to delay before dialing \ out the number (i.e., time to wait for dial tone). \ (Configuration); HELP = NOTE : This object is not used for the ISDN BRI \ voice card.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgDialDigTimeLimit | 1.3.6.1.4.1.335.1.4.21.1.7.1.21 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the voice \ channel inter-digit time-out time (in seconds). \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgMaxNumForDig | 1.3.6.1.4.1.335.1.4.21.1.7.1.22 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the voice \ channel maximum number of digits that can \ be dialed. (Configuration); HELP = 0 is used for auto-call functionality.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgRegenFormat | 1.3.6.1.4.1.335.1.4.21.1.7.1.23 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the voice \ channel dial digit regeneration format. \ (Configuration); HELP = NOTE: THIS object is not used for the ISDN \ BRI voice card.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgCallProgTone | 1.3.6.1.4.1.335.1.4.21.1.7.1.24 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the voice \ channel call progress tone required for different \ countries or areas. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgDTMFDetector | 1.3.6.1.4.1.335.1.4.21.1.7.1.25 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies to the voice \ channel whether to turn on or off the DTMF \ detector. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgJitters | 1.3.6.1.4.1.335.1.4.21.1.7.1.26 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the voice \ channel maximum jitters delay (in milliseconds). \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgEchoCanceller | 1.3.6.1.4.1.335.1.4.21.1.7.1.27 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies to the voice \ channel whether to turn on or off the echo \ canceller. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgAutoGainControl | 1.3.6.1.4.1.335.1.4.21.1.7.1.28 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies to the voice \ channel whether to automatically set the input \ signal level. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgCompanderFormat | 1.3.6.1.4.1.335.1.4.21.1.7.1.29 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the voice \ channel (DVM or BRI) compander type. \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgPremiumVoice | 1.3.6.1.4.1.335.1.4.21.1.7.1.30 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies to the voice \ channel (DVM) whether to enable or disable the \ transparent voice (no compression) algorithm. \ (Configuration); HELP = This object is also used by the ISDN BRI voice \ card to enable/disable Digital Lossless Switching \ Pattern Generation and Pattern Search.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgEndOfDialChar | 1.3.6.1.4.1.335.1.4.21.1.7.1.31 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies to the voice \ channel whether '#' is used to end a dialing input. \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgBckGrndNoiseLevel | 1.3.6.1.4.1.335.1.4.21.1.7.1.32 | INTEGER | read-only | NAME = ; DESC = Signal input above this level is considered\ a voiced signal, below this level, the \ Voice Activity Detector (VAD), will \ determine if it is a voiced signal or \ background noise. (Configuration); HELP = Refer to the International \ Telecommunication Union(ITU-T) G.711 \ document for more information; CAPABILITIES = ; |
| INT nvmVNETProfileCfgSilenceHngOvrTime | 1.3.6.1.4.1.335.1.4.21.1.7.1.33 | INTEGER | read-only | NAME = ; DESC = Indicates the time delay to switch \ from voice to silence.\ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgIdlePattern | 1.3.6.1.4.1.335.1.4.21.1.7.1.34 | INTEGER | read-only | NAME = ; DESC = The value of this object represents the \ Idle pattern on the line when no call is up.\ Specific to a PBX. This is a permanent DSP \ configuration parameter; HELP = This value can be used to detect that a call \ has finished and that the echo canceller should \ be reset and that fax mode should be terminated.; CAPABILITIES = ; |
| INT nvmVNETProfileCfgEcanFilterLength | 1.3.6.1.4.1.335.1.4.21.1.7.1.35 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the filter \ length for echo canceller. This is a permanent \ DSP configuration parameter.; HELP = A length of 128 is equal to 16ms.\ A length of 256 is equal to 32ms.; ---- NOTE: The ISDN BRI voice card supports 32ms only; CAPABILITIES = ; |
| INT nvmVNETProfileCfgEcanErlImprovement | 1.3.6.1.4.1.335.1.4.21.1.7.1.36 | INTEGER | read-only | NAME = ; DESC = The value of this object is used for echo \ canceller Er1 improvement. This is a DSP \ Dynamic configuration parameter. \ A signal will be attenuated by this dB \ amount before being passed through the \ echo canceller. After the echo canceller, \ it will be amplified by this same dB amount, \ for a net gain of 0 dB. \ This attenuation amplicfication cycle reduces \ the resolution of the signal ( -18 ..0 ).; HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgNoiseFloorOffset | 1.3.6.1.4.1.335.1.4.21.1.7.1.37 | INTEGER | read-only | NAME = ; DESC = The value of this object will suppress the \ impulsive backround noise in order to achieve \ silence suppression savings. HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgDtmfGenBurstLength | 1.3.6.1.4.1.335.1.4.21.1.7.1.38 | INTEGER | read-only | NAME = ; DESC = DTMF burst generation in milliseconds.; HELP = ; CAPABILITIES = ; |
| INT nvmVNETProfileCfgDtmRegenBurstLength | 1.3.6.1.4.1.335.1.4.21.1.7.1.39 | INTEGER | read-only | NAME = ; DESC = DTMF burst Regeneration length in milliseconds.; HELP = ; CAPABILITIES = ; |
| nvmVNETSwProfCfgTable | 1.3.6.1.4.1.335.1.4.21.1.8 | not-accessible | NAME = ; DESC = The VNET Voice Switching Profile Configuration \ table.(Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmVNETSwProfCfgEntry | 1.3.6.1.4.1.335.1.4.21.1.8.1 | not-accessible | NAME = ; DESC = An entry in the VNET Voice Switching Profile \ Configuration table. (Configuration); HELP = ; CAPABILITIES = ; | |
| INT nvmVNETSwProfCfgProfileNum | 1.3.6.1.4.1.335.1.4.21.1.8.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the profile \ number. Used as an index to the VNET Voice \ Switching Profile Configuration table. \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETSwProfCfgOutCallRestrict | 1.3.6.1.4.1.335.1.4.21.1.8.1.2 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies how to \ handle outgoing calls for voice channel \ switching. (Configuration); HELP = 2: include CUG ID in outgoing call. \ 3: include restriction class in outgoing call. \ 4: include both CUG ID and restriction \ class in outgoing call. \ 5: outgoing call is not allowed.; CAPABILITIES = ; |
| INT nvmVNETSwProfCfgInCallRestrict | 1.3.6.1.4.1.335.1.4.21.1.8.1.3 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies how to \ handle incoming calls for voice channel \ switching. (Configuration); HELP = 2: check CUG ID in incoming call. (Must \ match our CUG ID for call acceptance. \ 3: check RCC in incoming call. (Must be \ greater than or equal to our RCC for call \ acceptance. \ 4: check both CUG and RCC in incoming \ call. \ 5: incoming call is not allowed.; CAPABILITIES = ; |
| INT nvmVNETSwProfCfgCUGID | 1.3.6.1.4.1.335.1.4.21.1.8.1.4 | INTEGER | read-only | NAME = ; DESC = The value of this object assigns the Closed \ User Group ID for a voice channel. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETSwProfCfgRestrictClassCd | 1.3.6.1.4.1.335.1.4.21.1.8.1.5 | INTEGER | read-only | NAME = ; DESC = The value of this object assigns the Restriction \ Class Code for a voice channel. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmVNETSwProfCfgAutoCallEntNum | 1.3.6.1.4.1.335.1.4.21.1.8.1.6 | INTEGER | read-only | NAME = ; DESC = The value of this object provides a voice \ channel Auto Call destination number by \ specifying an index into the ingress table. \ (Configuration); HELP = 0: auto call disabled. \ 1-32: index to the ingress table entry where \ the dial number is specified. \ The auto call for the ISDN BRI voice card is always \ disabled.; CAPABILITIES = ; |
| INT nvmVNETSwProfCfgCallNegStrategy | 1.3.6.1.4.1.335.1.4.21.1.8.1.7 | INTEGER | read-only | NAME = ; DESC = The value of this object specifies the preference \ for the voice algorithm when an outgoing call is \ made. (Configuration); HELP = specific: whatever is configured. \ bandwidth: bigger block size. \ delay: shorter block size.; CAPABILITIES = ; |
| INT nvmVNETSwProfCfgTransmitPriority | 1.3.6.1.4.1.335.1.4.21.1.8.1.8 | INTEGER | read-only | NAME = ; DESC = The value of this object assigns the priority \ of the voice data to be transmitted. (Configuration); HELP = 0: lowest priority. \ 15: highest priority.; CAPABILITIES = ; |
| INT nvmVNETSwProfCfgAutoCallType | 1.3.6.1.4.1.335.1.4.21.1.8.1.9 | INTEGER | read-only | NAME = ; DESC = Indicates the type of auto-call \ switching to be performed by the \ voice channel.; HELP = ; CAPABILITIES = ; |
| INT nvmVNETSwProfCfgAddServerSelect | 1.3.6.1.4.1.335.1.4.21.1.8.1.10 | INTEGER | read-only | NAME = ; DESC = Indicates which DNA server is used.; HELP = ; CAPABILITIES = ; |
| INT nvmVNETSwProfCfgOutCallMode | 1.3.6.1.4.1.335.1.4.21.1.8.1.11 | INTEGER | read-only | NAME = ; DESC = Indicates the type of call being made.; HELP = ; CAPABILITIES = ; |
| nvmVNETIngressDigFilterTable | 1.3.6.1.4.1.335.1.4.21.1.9 | not-accessible | NAME = ; DESC = The VNET Voice Ingress Digit Filtering \ Configuration table. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmVNETIngressDigFilterEntry | 1.3.6.1.4.1.335.1.4.21.1.9.1 | not-accessible | NAME = ; DESC = An entry in the VNET Voice Ingress Digit \ Filtering Configuration table. (Configuration); HELP = ; CAPABILITIES = ; | |
| INT nvmVNETIngressDigFilterIndex | 1.3.6.1.4.1.335.1.4.21.1.9.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the index to \ the ingress table. Used as an index to the VNET \ Voice Ingress Digit Filtering Configuration table. \ Configuration); HELP = ; CAPABILITIES = ; |
| STR nvmVNETIngressDigFilterIngressNum | 1.3.6.1.4.1.335.1.4.21.1.9.1.2 | DisplayString | read-only | NAME = ; DESC = The value of this object selects the digit \ pattern to be matched. (Null terminated \ character string.) (Configuration); HELP = Valid characters are decimal digits, '#', \ '*', '+', '[' and ']' .; CAPABILITIES = ; |
| STR nvmVNETIngressDigFilterManipString | 1.3.6.1.4.1.335.1.4.21.1.9.1.3 | DisplayString | read-only | NAME = ; DESC = The value of this object selects commands \ to produce the ingress digits for speed dial, \ call redirect, and source ID insertion features. \ (Configuration); HELP = Valid characters are decimal digits, '#', \ '*', 'D', and 'I'.; CAPABILITIES = ; |
| nvmVNETEgressDigManipTable | 1.3.6.1.4.1.335.1.4.21.1.10 | not-accessible | NAME = ; DESC = The VNET Voice Egress Digit Manipulation \ Configuration table. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmVNETEgressDigManipEntry | 1.3.6.1.4.1.335.1.4.21.1.10.1 | not-accessible | NAME = ; DESC = An entry in the VNET Voice Egress Digit \ Manipulation Configuration table. (Configuration); HELP = ; CAPABILITIES = ; | |
| INT nvmVNETEgressDigManipIndex | 1.3.6.1.4.1.335.1.4.21.1.10.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the index to \ the egress table. Used as an index to the VNET \ Voice Egress Digit Manipulation Configuration \ table. Configuration); HELP = ; CAPABILITIES = ; |
| STR nvmVNETEgressDigManipPhoneNum | 1.3.6.1.4.1.335.1.4.21.1.10.1.2 | DisplayString | read-only | NAME = ; DESC = The value of this object selects the phone \ number that voice channels are associated with. \ This is the number to be registered to the Address \ Server (RSA). (Configuration); HELP = Valid characters are decimal digits, '#', and '*'.; CAPABILITIES = ; |
| STR nvmVNETEgressDigManipString | 1.3.6.1.4.1.335.1.4.21.1.10.1.3 | DisplayString | read-only | NAME = ; DESC = The value of this object selects commands \ to produce the egress digits for FXO, E&M, \ or FXS 3-Port interface. The result is the \ number to be sent to the connected phone \ device. (Configuration); HELP = Valid characters are decimal digits, '#', '*', \ '+', 'D', 'H', and 'I'. The character 'H' is \ used to trigger immediate dial handling by the PBX.; CAPABILITIES = ; |
| STR nvmVNETEgressDigManipChIDList | 1.3.6.1.4.1.335.1.4.21.1.10.1.4 | DisplayString | read-only | NAME = ; DESC = The value of this object selects voice channels \ associated with the phone number. The valid \ string consists of the substring 'B1'~'B6', \ 'C1'~'C12', 'D1'~'D12', and 'E1'~'E2'. \ (Configuration); HELP = Valid characters are decimal digits, 'B', 'C', \ 'D', and 'E'.; CAPABILITIES = ; |
| vnet_control | 1.3.6.1.4.1.335.1.4.21.2 | |||
| mcmVNETChControlTable | 1.3.6.1.4.1.335.1.4.21.2.1 | not-accessible | NAME = ; DESC = The VNET Voice Channel Control table. \ HELP = ; CAPABILITIES = NET_OPER, VPN_OPER ; | |
| mcmVNETChControlEntry | 1.3.6.1.4.1.335.1.4.21.2.1.1 | not-accessible | NAME = ; DESC = An entry in the VNET Voice Channel Control \ table.; HELP = ; CAPABILITIES = ; | |
| INT mcmVNETChControlLimID | 1.3.6.1.4.1.335.1.4.21.2.1.1.1 | INTEGER | read-only | NAME = ; DESC = The card lim (logical interface module) number of a \ particular voice channel. Used as an index to the \ VNET Voice Channel Control table.; HELP = ; CAPABILITIES = ; |
| INT mcmVNETChControlChannelID | 1.3.6.1.4.1.335.1.4.21.2.1.1.2 | INTEGER | read-only | NAME = ; DESC = The position of the voice channel in the lim. \ Used as an index to the VNET Voice \ Channel Control table.; HELP = ; CAPABILITIES = ; |
| INT mcmVNETChControlActionCmd | 1.3.6.1.4.1.335.1.4.21.2.1.1.3 | INTEGER | write-only | NAME = ; DESC = Setting this object will perform various \ actions on the specified voice channel. \ Note: Starting with software release 3.0, \ the enumeration clearChannelCounters (2) is \ not supported. The enumeration is included \ here only to support backwards compatibility \ for software versions prior to release 3.0.; HELP = 1: perform hardware reset to DSP. \ 2: clear statistics counter. \ 3: download code to DSP. \ 4: disconnect call. \ 5: set DSP to loopback mode. \ 6: terminate test. \ 7: force connect channel by using the \ auto call number. NOTE: This option is not \ supported by the ISDN BRI voice card.; CAPABILITIES = ; |
| INT mcmVNETSysControlActionCmd | 1.3.6.1.4.1.335.1.4.21.2.2 | INTEGER | write-only | NAME = ; DESC = Setting this object will perform various \ actions on the VNET voice system. \ Note: Starting with software release 3.0, \ the enumerations clearNetworkCounters (1) and \ clearChannelCounters (3) are not supported. \ The enumeration is included here only to support \ backwards compatibility for software versions \ prior to release 3.0.; HELP = 1: clear network statistics counters. \ 2: perform hardware reset to all channels. \ 3: clear all channel statistics counters. \ 4: download code to all channels. \ 5: disconnect all channel's calls. \ 6: set all channels to loopback mode. \ 7: terminate all channel's tests. \ 8: force connect all channels by using the auto call numbers. NOTE: This option is not \ supported by the ISDN BRI voice card.; \ 9: re-register phone number.; CAPABILITIES = NET_OPER, VPN_OPER ; |
| vnet_status | 1.3.6.1.4.1.335.1.4.21.3 | |||
| mcmVNETChStatusTable | 1.3.6.1.4.1.335.1.4.21.3.1 | not-accessible | NAME = ; DESC = The VNET Voice Channel Status Display table. \ HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmVNETChStatusEntry | 1.3.6.1.4.1.335.1.4.21.3.1.1 | not-accessible | NAME = ; DESC = An entry in the VNET Voice Channel Status Display \ table.; HELP = ; CAPABILITIES = ; | |
| INT mcmVNETChStatusLimID | 1.3.6.1.4.1.335.1.4.21.3.1.1.1 | INTEGER | read-only | NAME = ; DESC = The card lim (logical interface module) number of \ a particular voice channel. Used as an index to \ the VNET Voice Channel Status Display table.; HELP = ; CAPABILITIES = ; |
| INT mcmVNETChStatusChannelID | 1.3.6.1.4.1.335.1.4.21.3.1.1.2 | INTEGER | read-only | NAME = ; DESC = The position of the voice channel in the lim. \ Used as an index to the VNET Voice \ Channel Status Display table.; HELP = ; CAPABILITIES = ; |
| INT mcmVNETChStatusInterfaceType | 1.3.6.1.4.1.335.1.4.21.3.1.1.3 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the interface \ type of the specified voice channel.; HELP = Upon powerup, the interface type will not be \ available until the DSP software is loaded and its \ status is reported.; CAPABILITIES = ; |
| INT mcmVNETChStatusInterfaceSwID | 1.3.6.1.4.1.335.1.4.21.3.1.1.4 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the command \ interface version ID (CIVID) of the specified voice \ channel. (Note: CIVID is 20 or above.); HELP = ; CAPABILITIES = ; |
| INT mcmVNETChStatusEMType | 1.3.6.1.4.1.335.1.4.21.3.1.1.5 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the E&M \ type of the specified voice channel.; HELP = This is for E&M interface channels only. Other \ interface types will show notApplicable.; CAPABILITIES = ; |
| INT mcmVNETChStatusModelID | 1.3.6.1.4.1.335.1.4.21.3.1.1.6 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the hardware \ module type for the specified DVM voice channel.; HELP = This is for DVM voice channels only. Analog \ voice channels will show notApplicable.; CAPABILITIES = ; |
| INT mcmVNETChStatusDSPOperation | 1.3.6.1.4.1.335.1.4.21.3.1.1.7 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the current \ DSP status of the specified voice channel.; HELP = ; CAPABILITIES = ; |
| INT mcmVNETChStatusNetworkConnect | 1.3.6.1.4.1.335.1.4.21.3.1.1.8 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the current \ channel network connect status of the specified \ voice channel.; HELP = ; CAPABILITIES = ; |
| STR mcmVNETChStatusRemoteChHwType | 1.3.6.1.4.1.335.1.4.21.3.1.1.9 | DisplayString | read-only | NAME = ; DESC = The value of this object indicates the remote \ voice channel hardware type (corresponding to \ the specified voice channel).; HELP = This will be the NULL string if the specified \ voice channel is not connected.; CAPABILITIES = ; |
| STR mcmVNETChStatusRemoteChNodeName | 1.3.6.1.4.1.335.1.4.21.3.1.1.10 | DisplayString | read-only | NAME = ; DESC = The value of this object indicates the remote \ voice channel node name (corresponding to \ the specified voice channel).; HELP = This will be the NULL string if the specified \ voice channel is not connected.; CAPABILITIES = ; |
| STR mcmVNETChStatusRemoteChNum | 1.3.6.1.4.1.335.1.4.21.3.1.1.11 | DisplayString | read-only | NAME = ; DESC = The value of this object indicates the remote \ voice channel number (corresponding to \ the specified voice channel).; HELP = This will be the NULL string if the specified \ voice channel is not connected.; CAPABILITIES = ; |
| STR mcmVNETChStatusRemoteChIfType | 1.3.6.1.4.1.335.1.4.21.3.1.1.12 | DisplayString | read-only | NAME = ; DESC = The value of this object indicates the remote \ voice channel interface type (corresponding to \ the specified voice channel).; HELP = This will be the NULL string if the specified \ voice channel is not connected.; CAPABILITIES = ; |
| INT mcmVNETChStatusRemoteFrameIfVer | 1.3.6.1.4.1.335.1.4.21.3.1.1.13 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the final \ negotiated software version to be run on both \ sides of a voice channel connection.; HELP = This will be 0 if the specified \ voice channel is not connected.; CAPABILITIES = ; |
| STR mcmVNETChStatusRemoteChVoiceAlg | 1.3.6.1.4.1.335.1.4.21.3.1.1.14 | DisplayString | read-only | NAME = ; DESC = The value of this object indicates the final \ negotiated voice algorithm running on both \ sides of a voice channel connection.; HELP = This will be the NULL string if the specified \ voice channel is not connected.; CAPABILITIES = ; |
| STR mcmVNETChStatusRemoteChFaxAlg | 1.3.6.1.4.1.335.1.4.21.3.1.1.15 | DisplayString | read-only | NAME = ; DESC = The value of this object indicates the final \ negotiated voice fax algorithm and maximum \ speed running on both sides of a voice fax \ channel connection.; HELP = This will be the NULL string if the specified \ voice fax channel is not connected.; CAPABILITIES = ; |
| STR mcmVNETChStatusRemoteChModemAlg | 1.3.6.1.4.1.335.1.4.21.3.1.1.16 | DisplayString | read-only | NAME = ; DESC = The value of this object indicates the final \ negotiated voice modem algorithm and maximum \ speed running on both sides of a voice modem \ channel connection.; HELP = This will be the NULL string if the specified \ voice fax channel is not connected.; CAPABILITIES = ; |
| INT mcmVNETChStatusSelfTestResult | 1.3.6.1.4.1.335.1.4.21.3.1.1.17 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the results \ of a self test performed on the specified voice \ channel.; HELP = ; CAPABILITIES = ; |
| INT mcmVNETChStatusFlashEPROM | 1.3.6.1.4.1.335.1.4.21.3.1.1.18 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the current \ flash EPROM status in the DSP of the specified \ voice channel.; HELP = ; CAPABILITIES = ; |
| INT mcmVNETChStatusEPROM | 1.3.6.1.4.1.335.1.4.21.3.1.1.19 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the current \ EPROM status in the DSP of the specified voice \ channel.; HELP = ; CAPABILITIES = ; |
| STR mcmVNETChStatusDspPROMVer | 1.3.6.1.4.1.335.1.4.21.3.1.1.20 | DisplayString | read-only | NAME = ; DESC = The value of this object indicates the DSP PROM \ version of the specified voice channel.; HELP = ; CAPABILITIES = ; |
| STR mcmVNETChStatusPROMID | 1.3.6.1.4.1.335.1.4.21.3.1.1.21 | DisplayString | read-only | NAME = ; DESC = The value of this object indicates the PROM \ ID of the specified voice channel.; HELP = ; CAPABILITIES = ; |
| INT mcmVNETChStatusInputLevel | 1.3.6.1.4.1.335.1.4.21.3.1.1.22 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the input \ level of the specified voice channel.; HELP = ; CAPABILITIES = ; |
| voiceSysStatusGroup | 1.3.6.1.4.1.335.1.4.21.3.2 | |||
| INT voiceSysStatusPhoneRegistrationStatus | 1.3.6.1.4.1.335.1.4.21.3.2.1 | INTEGER | read-only | NAME = PhoneRegistrationStatus; DESC = Indicates current communications \ status with NAS; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| vnet_statistics | 1.3.6.1.4.1.335.1.4.21.4 | |||
| mcmVNETChStatsTable | 1.3.6.1.4.1.335.1.4.21.4.1 | not-accessible | NAME = ; DESC = The VNET Voice Channel Statistics Display table. \ HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmVNETChStatsEntry | 1.3.6.1.4.1.335.1.4.21.4.1.1 | not-accessible | NAME = ; DESC = An entry in the VNET Voice Channel Statistics \ Display table.; HELP = ; CAPABILITIES = ; | |
| INT mcmVNETChStatsLimID | 1.3.6.1.4.1.335.1.4.21.4.1.1.1 | INTEGER | read-only | NAME = ; DESC = The card lim (logical interface module) number of a \ particular voice channel. Used as an index to the \ VNET Voice Channel Statistics Display table.; HELP = ; CAPABILITIES = ; |
| INT mcmVNETChStatsChannelID | 1.3.6.1.4.1.335.1.4.21.4.1.1.2 | INTEGER | read-only | NAME = ; DESC = The position of the voice channel in the lim. \ Used as an index to the VNET Voice \ Channel Statistics Display table.; HELP = ; CAPABILITIES = ; |
| CTR mcmVNETChStatsOutCallConnTime | 1.3.6.1.4.1.335.1.4.21.4.1.1.3 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ connection time (in sec) since the last statistics \ reset for the specified voice channel outgoing \ calls. (Excludes call setup time and local calls.) ; HELP = ; CAPABILITIES = ; |
| CTR mcmVNETChStatsInCallConnTime | 1.3.6.1.4.1.335.1.4.21.4.1.1.4 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ connection time (in sec) since the last statistics \ reset for the specified voice channel incoming \ calls. (Excludes local calls.) ; HELP = ; CAPABILITIES = ; |
| CTR mcmVNETChStatsOutCallsSucceded | 1.3.6.1.4.1.335.1.4.21.4.1.1.5 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of positive call responses sent from the \ remote DSP since the last statistics reset \ for the specified voice channel. (Excludes \ local calls.) ; HELP = ; CAPABILITIES = ; |
| CTR mcmVNETChStatsOutCallsFailed | 1.3.6.1.4.1.335.1.4.21.4.1.1.6 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of negative call responses sent from the \ remote DSP since the last statistics reset \ for the specified voice channel. (Excludes \ local calls.) ; HELP = ; CAPABILITIES = ; |
| CTR mcmVNETChStatsInCallsAccepted | 1.3.6.1.4.1.335.1.4.21.4.1.1.7 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of positive call responses sent to the \ remote DSP since the last statistics reset \ for the specified voice channel. (Excludes \ local calls.) ; HELP = ; CAPABILITIES = ; |
| CTR mcmVNETChStatsInCallsRejected | 1.3.6.1.4.1.335.1.4.21.4.1.1.8 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of negative call responses sent to the \ remote DSP since the last statistics reset \ for the specified voice channel. (Excludes \ local calls.) ; HELP = ; CAPABILITIES = ; |
| CTR mcmVNETChStatsNumberOfResets | 1.3.6.1.4.1.335.1.4.21.4.1.1.9 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of resets sent to the DSP corresponding \ to the specified voice channel.; HELP = ; CAPABILITIES = ; |
| CTR mcmVNETChStatsNumberOfRetries | 1.3.6.1.4.1.335.1.4.21.4.1.1.10 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of no responses sent from the DSP \ since the last DSP reset corresponding \ to the specified voice channel.; HELP = ; CAPABILITIES = ; |
| CTR mcmVNETChStatsBBCFramesRcvd | 1.3.6.1.4.1.335.1.4.21.4.1.1.11 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of frames with Bad Byte Count received \ from the DSP corresponding to the specified \ voice channel.; HELP = ; CAPABILITIES = ; |
| CTR mcmVNETChStatsBEOFFramesRcvd | 1.3.6.1.4.1.335.1.4.21.4.1.1.12 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of frames with Bad End Of Frame \ character received from the DSP corresponding \ to the specified voice channel.; HELP = ; CAPABILITIES = ; |
| CTR mcmVNETChStatsLostSpeechFrames | 1.3.6.1.4.1.335.1.4.21.4.1.1.13 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of speech frames sent by the remote \ that were lost since power up corresponding \ to the specified voice channel.; HELP = Always 0 if sequence number in speech frame \ is not used.; CAPABILITIES = ; |
| CTR mcmVNETChStatsLostControlFrames | 1.3.6.1.4.1.335.1.4.21.4.1.1.14 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of control frames sent by the remote \ that were lost corresponding to the specified \ voice channel.; HELP = ; CAPABILITIES = ; |
| CTR mcmVNETChStatsInvalPayloadFrRcvd | 1.3.6.1.4.1.335.1.4.21.4.1.1.15 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of payload frames received from the \ remote with bad length or frame type \ corresponding to the specified voice channel.; HELP = ; CAPABILITIES = ; |
| CTR mcmVNETChStatsInvalPUMPMsgRcvd | 1.3.6.1.4.1.335.1.4.21.4.1.1.16 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of PUMP messages received from the \ remote with unknown message type, IEs, or \ invalid length corresponding to the specified \ voice channel.; HELP = ; CAPABILITIES = ; |
| mcmVNETNetStatsGroup | 1.3.6.1.4.1.335.1.4.21.4.2 | |||
| CTR mcmVNETNetStatsSucceedOutSVCCalls | 1.3.6.1.4.1.335.1.4.21.4.2.1 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of successful SVC calls since the \ last network statistics reset.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| CTR mcmVNETNetStatsFailedOutSVCCalls | 1.3.6.1.4.1.335.1.4.21.4.2.2 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of unsuccessful SVC calls since the \ last network statistics reset.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| CTR mcmVNETNetStatsAcceptedInCalls | 1.3.6.1.4.1.335.1.4.21.4.2.3 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of SVC calls accepted by this access device \ since the last network statistics reset.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| CTR mcmVNETNetStatsRejectedInCalls | 1.3.6.1.4.1.335.1.4.21.4.2.4 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of SVC calls rejected by this access device \ since the last network statistics reset.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| CTR mcmVNETNetStatsSucceedDNARequests | 1.3.6.1.4.1.335.1.4.21.4.2.5 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of successful DNA requests received \ by this access device since the last network \ statistics reset.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| CTR mcmVNETNetStatsFailedDNARequests | 1.3.6.1.4.1.335.1.4.21.4.2.6 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of unsuccessful DNA requests received \ by this access device since the last network \ statistics reset.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| CTR mcmVNETNetStatsFailedBuffAllocations | 1.3.6.1.4.1.335.1.4.21.4.2.7 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of streams buffers not available \ to this access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| CTR mcmVNETNetStatsNumActiveCalls | 1.3.6.1.4.1.335.1.4.21.4.2.8 | Counter | read-only | NAME = ; DESC = The value of this object indicates the total \ number of calls in progress or connected \ in this access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
RFC description
Manages voice network configuration on MICOM 4400 access devices including signaling, profiles, and digital filtering.
Start monitoring MICOM 4400 VNET voice-network multiplexer with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.