CXVSHELL-MIB

All MIBs › CXVSHELL-MIB

Category: Vendor: Aastra

Description: Manages the virtual shell interface for Aastra/ConvertedX WAN access equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CXVSHELL-MIB?

CXVSHELL-MIB is a small private MIB mapping voice-card-to-slot associations on a modular chassis platform (built on the vendor's CXProduct-SMI), where each voice card number corresponds one-to-one with its physical I/O slot number. Its voice-card-map table, keyed by card number, records the associated slot number, connection status, and row status, alongside a MIB-level version object. As a hardware-status MIB it lets an administrator confirm a voice card's slot binding and connection status. It is deployed on this vendor's modular voice-processing chassis. Engineers can download the CXVSHELL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CXVSHELL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Modular voice-processing chassis (CXProduct family)

Monitoring Examples

An administrator checks voxConnStatus for a specific voice card number to confirm it's properly connected in its associated I/O slot before troubleshooting a missing dial-tone issue.

What Can Be Monitored

voice card slot binding and connection status

Imported Objects

From CXProduct-SMI

cxMc600

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
cxVShell	1.3.6.1.4.1.495.2.1.1.3
voxCardsMapTable	1.3.6.1.4.1.495.2.1.1.3.1		not-accessible	Voice cards associations with I/O slots numbers. The voice card number corresponds to the slot number: voice card 1 is always associated with slot number 1, voice card 2 is always associated with slot number 2 and so on.
voxCardsMapEntry	1.3.6.1.4.1.495.2.1.1.3.1.1		not-accessible	Each row associates a voice card number to an I/O slot number.
INT voxCardNo	1.3.6.1.4.1.495.2.1.1.3.1.1.1	INTEGER	read-only	Displays the voice I/O card number that is enabled. Range of Values: a single digit from 1 to 8 Default Value: none
INT voxSlotNo	1.3.6.1.4.1.495.2.1.1.3.1.1.2	INTEGER	read-write	Determines the I/O slot number. Range of Values: a single digit from 1 to 8 Default Value: none Configuration Changed: administrative
INT voxConnStatus	1.3.6.1.4.1.495.2.1.1.3.1.1.3	INTEGER	read-only	Displays whether a voice I/O card-to-slot number association has been successful at the VCE layer. Options: recorded-in-config (1): configuration is correct but has not yet been implemeted. System reset required. failed (2): configuration not performed correctly. The configuration may have the correct syntax but the change cannot be implemented at the VCE layer because there is no voice I/O card in the requested slot. If the requested slot is currently occupied by another kind of I/O card, for example an Ethernet card, the same result will occur. connected (3): configuration performed properly and association made. DefaultValue: none
INT voxCardRowStatus	1.3.6.1.4.1.495.2.1.1.3.1.1.4	INTEGER	read-write	Determines the status of the objects in a table row. Options: invalid (1): row is flagged; after the next reset the values will be disabled and the row will be deleted from the table. valid (2): values are enabled. DefaultValue: none Configuration Changed: administrative
INT cxvshellMibLevel	1.3.6.1.4.1.495.2.1.1.3.2	INTEGER	read-only	Used to determine current MIB module release supported by the agent. Object is in decimal.

RFC description

Proprietary SNMP MIB for network device shell and command execution management. Allows remote SNMP monitoring of shell interface status and operational parameters on compatible networking equipment.

Start monitoring Modular voice-processing chassis (CXProduct family, voice card/slot mapping) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CXVSHELL-MIB

What Is CXVSHELL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description