All MIBs › CXVSHELL-MIB › voxConnStatus
voxConnStatus
Module: CXVSHELL-MIB
OID (symbolic): CXVSHELL-MIB::voxConnStatus
OID (numeric): 1.3.6.1.4.1.495.2.1.1.3.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Displays whether a voice I/O card-to-slot number association has been successful at the VCE layer.
Options: recorded-in-config (1): configuration is correct but has not yet been implemeted. System reset required.
failed (2): configuration not performed correctly. The configuration may have the correct syntax but the change cannot be implemented at the VCE layer because there is no voice I/O card in the requested slot. If the requested slot is currently occupied by another kind of I/O card, for example an Ethernet card, the same result will occur.
connected (3): configuration performed properly and association made.
DefaultValue: none
What is voxConnStatus?
This value reports whether the mapping between a voice I/O card and its configured chassis slot has actually taken effect at the hardware (VCE) layer, distinguishing between a pending configuration, a failed association, and a successfully connected one. An admin checks this after configuring voxSlotNo to confirm the association actually worked, rather than assuming success just because the configuration was accepted. For example, a status of failed(2) after setting a slot number would tell the admin that slot is either occupied by a non-voice card or otherwise unable to accept the requested voice card association, requiring a system reset or slot change to resolve.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.1.3.1.1.3 snmpwalk -v2c -c public <target> CXVSHELL-MIB::voxConnStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.1.3.1.1.3.1 snmpget -v2c -c public <target> CXVSHELL-MIB::voxConnStatus.1
Start monitoring Modular voice-processing chassis (CXProduct family, voice card/slot mapping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXVSHELL-MIB::voxConnStatus OID value, configure state conditions and alerts, and monitor any Modular voice-processing chassis (CXProduct family, voice card/slot mapping) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.1 | cxMc600 | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.1.3 | cxVShell | CXVSHELL-MIB |
| 1.3.6.1.4.1.495.2.1.1.3.1 | voxCardsMapTable | CXVSHELL-MIB |
| 1.3.6.1.4.1.495.2.1.1.3.1.1 | voxCardsMapEntry | CXVSHELL-MIB |
| 1.3.6.1.4.1.495.2.1.1.3.1.1.3 | voxConnStatus | CXVSHELL-MIB |