CXUTST-MIB

All MIBs › CXUTST-MIB

Category: Vendor: Aastra

Description: Provides unit test management and diagnostics for Aastra/ConvertedX WAN equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CXUTST-MIB?

CXUTST-MIB is a small private MIB (built on CXProduct-SMI) reporting self-test results for an ISDN U-Interface daughter card. Its table, keyed by slot number, records I/O register-test and LEDs-test results, impedance register-test result and communication-test poll result, and UIF (U-Interface) register-test result and communication-test poll result. As a diagnostic/hardware-status MIB it lets an administrator confirm an ISDN U-Interface daughter card passed its self-tests before relying on it for BRI/PRI service. It is deployed on this vendor's modular chassis with ISDN U-Interface daughter cards. Engineers can download the CXUTST-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CXUTST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Modular chassis with ISDN U-Interface daughter cards

Monitoring Examples

A technician checks utstUifRegTest and utstUifComTestPollResult to confirm an ISDN U-Interface daughter card passed self-test after a hardware swap on this platform.

What Can Be Monitored

ISDN daughter-card self-test results

Imported Objects

From CXProduct-SMI

cxUTst

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
utstTable	1.3.6.1.4.1.495.2.1.6.40.10		not-accessible	A table containing test results of an ISDN U-Interface daughter card.
utstEntry	1.3.6.1.4.1.495.2.1.6.40.10.1		not-accessible	The parameters for a specific ISDN U-Interface daughter card.
INT utstSlotNumberIndex	1.3.6.1.4.1.495.2.1.6.40.10.1.1	INTEGER	read-only	Indicates the row containing objects for monitoring an I/O card in the CX 900. Range of Values: 1-6 Default Value: none
INT utstIoRegTest	1.3.6.1.4.1.495.2.1.6.40.10.1.20	INTEGER	read-only	Indicates the result of the ISDN U-interface I/O register test. Options: failed (1): register test failed passed (2): register test passed Default Value: passed (2)
INT utstIoLedsTest	1.3.6.1.4.1.495.2.1.6.40.10.1.21	INTEGER	read-only	Indicates the result of the ISDN U-interface Integrated Multiprotocol Processor (IMP) LEDs test. Options: initializationFailed (1): IMP initialization failed initializationPassed (2): IMP initialization passed Default Value: initializationPassed
INT utstImpRegTest	1.3.6.1.4.1.495.2.1.6.40.10.1.22	INTEGER	read-only	Indicates the result of the ISDN U-interface Integrated Multiprotocol Processor (IMP) register test. Options: initializationFailed (1): IMP initialization failed failed (2): IMP register test failed passed (3): IMP register test passed Default Value: passed (3)
INT utstImpComTestPollResult	1.3.6.1.4.1.495.2.1.6.40.10.1.23	INTEGER	read-only	Indicates the result of the ISDN U-interface IMP internal communication test while in polling mode. Options: initializationFailed (1): IMP initialization failed failed (2): IMP communication test failed in polling mode passed (3): IMP communication test passed in polling mode Default Value: passed (3)
INT utstUifRegTest	1.3.6.1.4.1.495.2.1.6.40.10.1.24	INTEGER	read-only	Indicates the result of the ISDN U-interface transceiver register test. Options: initializationFailed (1): IMP initialization test failed failed (2): transceiver register test failed passed (3): transceiver register test passed Default Value: passed (3)
INT utstUifComTestPollResult	1.3.6.1.4.1.495.2.1.6.40.10.1.25	INTEGER	read-only	Indicates the result of the ISDN U-interface transceiver internal communication test while in polling mode. Options: initializationFailed (1): IMP initialization failed failed (2): transceiver communication test failed in polling mode passed (3): transceiver communication test passed in polling mode Default Value: passed (3)

RFC description

Monitors ISDN U-Interface daughter card self-test results including register and communication test status.

Start monitoring Modular chassis with ISDN U-Interface daughter card (self-test) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CXUTST-MIB

What Is CXUTST-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description