CM-SA-MIB :: esaProbeStatsY1731R2PFrames

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCM-SA-MIBesaProbeStatsY1731R2PFrames

esaProbeStatsY1731R2PFrames

Module: CM-SA-MIB

OID (symbolic): CM-SA-MIB::esaProbeStatsY1731R2PFrames

OID (numeric): 1.3.6.1.4.1.2544.1.12.8.1.7.1.59

Node type: OBJECT-TYPE

Type: PerfCounter64

Access: read-only

Description: This attribute is only applicable to Y.1731 probes. This is the number of data frames counted by the Destination MEP (Reflector) that are transmitted towards the Source MEP (Probe). Based on the configuration the MEP counts the data frames with: - MEP's LM RX priority or all the priorities - All the VLAN IDs belonging the MEP's MA VID list.

What is esaProbeStatsY1731R2PFrames?

esaProbeStatsY1731R2PFrames is a 64-bit performance counter, applicable only to Y.1731 probes, counting data frames the destination MEP transmits from the reflector back to the probe, for the interval that is still being actively collected (the live bin). This frame count reflects exactly what the MEP is configured to count, namely its priority filter and its VLAN (MA VID) membership, so a technician cross-checking it against a switch port counter needs to remember it may deliberately be a subset of total traffic. For example, if a technician widens the MEP's counted VLAN list, they expect this live frame count to rise immediately, and if it does not, the configuration change did not actually take effect.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.8.1.7.1.59
snmpwalk -v2c -c public <target> CM-SA-MIB::esaProbeStatsY1731R2PFrames

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.8.1.7.1.59.1
snmpget -v2c -c public <target> CM-SA-MIB::esaProbeStatsY1731R2PFrames.1

Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-SA-MIB::esaProbeStatsY1731R2PFrames OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2544.1.12.8cmServiceAssuranceMIBCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1cmServAssuranceObjectsCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1.7esaProbeStatsTableCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1.7.1esaProbeStatsEntryCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1.7.1.59esaProbeStatsY1731R2PFramesCM-SA-MIB