CM-SA-MIB :: esaProbeStatsSumAbsP2RJitter

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCM-SA-MIBesaProbeStatsSumAbsP2RJitter

esaProbeStatsSumAbsP2RJitter

Module: CM-SA-MIB

OID (symbolic): CM-SA-MIB::esaProbeStatsSumAbsP2RJitter

OID (numeric): 1.3.6.1.4.1.2544.1.12.8.1.7.1.68

Node type: OBJECT-TYPE

Type: PerfCounter64

Access: read-only

Description: This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the sum of absolute P2R Jitter values.

What is esaProbeStatsSumAbsP2RJitter?

esaProbeStatsSumAbsP2RJitter is a 64-bit performance counter that reports the running total (sum) of the absolute-value one-way jitter (magnitude of the delay swing regardless of direction), in microseconds, from the probe to the reflector, applicable to Layer 3 ICMP-timestamp and Layer 2 Y.1731 probes, for the interval that is still being actively collected (the live bin). Because it discards the sign of the swing, this absolute-jitter figure from the probe to the reflector gives a technician a single severity number to alarm on without watching the positive and negative jitter counters separately. For example, the technician can divide this live running total by the packet count reported in the same still-open bin to independently recompute the average absolute jitter from the probe to the reflector before the bin rolls over.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.8.1.7.1.68
snmpwalk -v2c -c public <target> CM-SA-MIB::esaProbeStatsSumAbsP2RJitter

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.8.1.7.1.68.1
snmpget -v2c -c public <target> CM-SA-MIB::esaProbeStatsSumAbsP2RJitter.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> esaProbeStatsSumAbsP2RJitter.1

Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-SA-MIB::esaProbeStatsSumAbsP2RJitter OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2544.1.12.8cmServiceAssuranceMIBCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1cmServAssuranceObjectsCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1.7esaProbeStatsTableCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1.7.1esaProbeStatsEntryCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1.7.1.68esaProbeStatsSumAbsP2RJitterCM-SA-MIB