All MIBs › CM-SA-MIB › esaProbeStatsP2RErredPkts
esaProbeStatsP2RErredPkts
Module: CM-SA-MIB
OID (symbolic): CM-SA-MIB::esaProbeStatsP2RErredPkts
OID (numeric): 1.3.6.1.4.1.2544.1.12.8.1.7.1.9
Node type: OBJECT-TYPE
Type: PerfCounter64
Access: read-only
Description: The total number of Packets in the current interval, for which there was a problem in transmission. This error is counted when there is a failure in packet transmission due to resource limitations (buffers). This can happen if the Probe Configuration was changed to send in a large number of packets in a time interval.
NOTE: This is not applicable for Y.1731 probes.
What is esaProbeStatsP2RErredPkts?
esaProbeStatsP2RErredPkts is a 64-bit performance counter counting test packets from the probe to the reflector that failed to transmit because of local buffer/resource limits, for the interval that is still being actively collected (the live bin); it does not apply to Y.1731 probes. A rising erred-packet count usually points to the probe itself running out of transmit buffers, which is a sign the configured packet rate is too aggressive for the platform rather than a fault in the network being tested. For example, if a technician doubles the packet rate on a live probe and this live erred-packet count immediately jumps, that is the signal to dial the rate back down rather than blame the circuit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.8.1.7.1.9 snmpwalk -v2c -c public <target> CM-SA-MIB::esaProbeStatsP2RErredPkts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.8.1.7.1.9.1 snmpget -v2c -c public <target> CM-SA-MIB::esaProbeStatsP2RErredPkts.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> esaProbeStatsP2RErredPkts.1
Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-SA-MIB::esaProbeStatsP2RErredPkts OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.8 | cmServiceAssuranceMIB | CM-SA-MIB |
| 1.3.6.1.4.1.2544.1.12.8.1 | cmServAssuranceObjects | CM-SA-MIB |
| 1.3.6.1.4.1.2544.1.12.8.1.7 | esaProbeStatsTable | CM-SA-MIB |
| 1.3.6.1.4.1.2544.1.12.8.1.7.1 | esaProbeStatsEntry | CM-SA-MIB |
| 1.3.6.1.4.1.2544.1.12.8.1.7.1.9 | esaProbeStatsP2RErredPkts | CM-SA-MIB |