CM-SA-MIB :: esaProbeStatsMinNegR2PJitter

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCM-SA-MIBesaProbeStatsMinNegR2PJitter

esaProbeStatsMinNegR2PJitter

Module: CM-SA-MIB

OID (symbolic): CM-SA-MIB::esaProbeStatsMinNegR2PJitter

OID (numeric): 1.3.6.1.4.1.2544.1.12.8.1.7.1.49

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The minimum negative one-way jitter from destination to source in the current interval.

What is esaProbeStatsMinNegR2PJitter?

esaProbeStatsMinNegR2PJitter is an unsigned 32-bit value that reports the lowest recorded negative one-way jitter (packet-to-packet delay variation), in microseconds, from the reflector back to the probe, for the interval that is still being actively collected (the live bin). Negative (a packet arriving earlier than the one before it) jitter from the reflector back to the probe is exactly the kind of packet-to-packet delay variation that causes stutter in voice and video traffic riding over the same service. For example, if this minimum negative jitter from the reflector back to the probe holds steady at its usual floor while spikes show up elsewhere in the same live bin, the technician watching the dashboard right now can conclude the path itself is healthy and the spikes are transient.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.8.1.7.1.49
snmpwalk -v2c -c public <target> CM-SA-MIB::esaProbeStatsMinNegR2PJitter

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.8.1.7.1.49.1
snmpget -v2c -c public <target> CM-SA-MIB::esaProbeStatsMinNegR2PJitter.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> esaProbeStatsMinNegR2PJitter.1

Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-SA-MIB::esaProbeStatsMinNegR2PJitter OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2544.1.12.8cmServiceAssuranceMIBCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1cmServAssuranceObjectsCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1.7esaProbeStatsTableCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1.7.1esaProbeStatsEntryCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1.7.1.49esaProbeStatsMinNegR2PJitterCM-SA-MIB