All MIBs › CM-SA-MIB › esaProbeStatsMinAbsR2PJitter
esaProbeStatsMinAbsR2PJitter
Module: CM-SA-MIB
OID (symbolic): CM-SA-MIB::esaProbeStatsMinAbsR2PJitter
OID (numeric): 1.3.6.1.4.1.2544.1.12.8.1.7.1.63
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the minimum absolute R2P Jitter value. .
What is esaProbeStatsMinAbsR2PJitter?
esaProbeStatsMinAbsR2PJitter is an unsigned 32-bit value that reports the lowest recorded absolute-value one-way jitter (magnitude of the delay swing regardless of direction), in microseconds, from the reflector back to the probe, applicable to Layer 3 ICMP-timestamp and Layer 2 Y.1731 probes, for the interval that is still being actively collected (the live bin). Because it discards the sign of the swing, this absolute-jitter figure from the reflector back to the probe gives a technician a single severity number to alarm on without watching the positive and negative jitter counters separately. For example, if this minimum absolute jitter from the reflector back to the probe holds steady at its usual floor while spikes show up elsewhere in the same live bin, the technician watching the dashboard right now can conclude the path itself is healthy and the spikes are transient.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.8.1.7.1.63 snmpwalk -v2c -c public <target> CM-SA-MIB::esaProbeStatsMinAbsR2PJitter
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.8.1.7.1.63.1 snmpget -v2c -c public <target> CM-SA-MIB::esaProbeStatsMinAbsR2PJitter.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> esaProbeStatsMinAbsR2PJitter.1
Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-SA-MIB::esaProbeStatsMinAbsR2PJitter OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.8 | cmServiceAssuranceMIB | CM-SA-MIB |
| 1.3.6.1.4.1.2544.1.12.8.1 | cmServAssuranceObjects | CM-SA-MIB |
| 1.3.6.1.4.1.2544.1.12.8.1.7 | esaProbeStatsTable | CM-SA-MIB |
| 1.3.6.1.4.1.2544.1.12.8.1.7.1 | esaProbeStatsEntry | CM-SA-MIB |
| 1.3.6.1.4.1.2544.1.12.8.1.7.1.63 | esaProbeStatsMinAbsR2PJitter | CM-SA-MIB |