CM-SA-MIB :: ecpaControlMonitorDirection

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCM-SA-MIBecpaControlMonitorDirection

ecpaControlMonitorDirection

Module: CM-SA-MIB

OID (symbolic): CM-SA-MIB::ecpaControlMonitorDirection

OID (numeric): 1.3.6.1.4.1.2544.1.12.8.1.1.1.7

Node type: OBJECT-TYPE

Type: TrafficDirection

Access: read-write

Description: This object enables specification of the direction of receival of generated traffic. This value must be specified if the interface is used for receiving/monitoring generated traffic. Both of ecpaControlInjectorDirection and ecpaControlMonitorDirection must be specified.

What is ecpaControlMonitorDirection?

This read-write TrafficDirection specifies which direction the port should monitor for received generated traffic, and must be specified together with ecpaControlInjectorDirection. It tells the ECPA engine which direction the port should listen on to capture and measure the returning test frames. For example, setting MonitorDirection to access configures the test head to capture frames arriving back from the access side after they've looped through the network under test.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.8.1.1.1.7
snmpwalk -v2c -c public <target> CM-SA-MIB::ecpaControlMonitorDirection

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.8.1.1.1.7.1
snmpget -v2c -c public <target> CM-SA-MIB::ecpaControlMonitorDirection.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.8.1.1.1.7.1 s <value>

Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-SA-MIB::ecpaControlMonitorDirection OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2544.1.12.8cmServiceAssuranceMIBCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1cmServAssuranceObjectsCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1.1ecpaControlTableCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1.1.1ecpaControlEntryCM-SA-MIB
1.3.6.1.4.1.2544.1.12.8.1.1.1.7ecpaControlMonitorDirectionCM-SA-MIB