All MIBs › CM-SA-MIB › ecpaControlAction
ecpaControlAction
Module: CM-SA-MIB
OID (symbolic): CM-SA-MIB::ecpaControlAction
OID (numeric): 1.3.6.1.4.1.2544.1.12.8.1.1.1.11
Node type: OBJECT-TYPE
Type: EcpaControlAction
Access: read-write
Description: This object enables starting/stopping of traffic generation as well as resetting of monitored streams. This object may not be specified at configuration creation time - in this case it will take the value of `none'. This allows manager to explicitly control the start and stop of traffic generation/monitoring activity. Value of `stop' is invalid if the activity is specified but not started. Value of `start' is valid during creation time, as well as when activity is already stopped. Specification of `reset' resets the specified streams to default values, as well as clears the control specification. Get on this variable gives the most recent SNMP set specification.
What is ecpaControlAction?
This read-write EcpaControlAction starts or stops traffic generation and resets monitored streams; it takes the value none by default at creation, and a stop value is invalid if the activity was never started. It gives the operator explicit start, stop, and reset control over an already-configured ECPA test run. For example, after reviewing early results, an operator sets ecpaControlAction to stop to halt an in-progress duration test early once the link has clearly failed the throughput target.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.8.1.1.1.11 snmpwalk -v2c -c public <target> CM-SA-MIB::ecpaControlAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.8.1.1.1.11.1 snmpget -v2c -c public <target> CM-SA-MIB::ecpaControlAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.8.1.1.1.11.1 s <value>
Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-SA-MIB::ecpaControlAction OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.8 | cmServiceAssuranceMIB | CM-SA-MIB |
| 1.3.6.1.4.1.2544.1.12.8.1 | cmServAssuranceObjects | CM-SA-MIB |
| 1.3.6.1.4.1.2544.1.12.8.1.1 | ecpaControlTable | CM-SA-MIB |
| 1.3.6.1.4.1.2544.1.12.8.1.1.1 | ecpaControlEntry | CM-SA-MIB |
| 1.3.6.1.4.1.2544.1.12.8.1.1.1.11 | ecpaControlAction | CM-SA-MIB |