All MIBs › CLIENT-MIB
Description: IBM enterprise MIB for monitoring client workstation hardware, software inventory, and system information on IBM-managed desktop systems
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CLIENT-MIB?
CLIENT-MIB is an IBM enterprise MIB used to inventory and monitor client workstations/desktops managed under IBM's systems-management framework. It exposes a system table describing each managed client's name, description, IP address, SNA/APPN network identity, and community string, giving administrators a per-device inventory record. Critically for hardware/software status monitoring, it reports clntMemorySize (installed memory), clntSystemUpTime (how long the workstation has run since last reboot), and clntSystemStatus (overall operational state), plus a flag (clntSupportMibII) indicating whether the client also implements standard MIB-II. It has an explicit dependency on RFC 1213 MIB-II, since clntSupportMibII exists to signal interoperability with that standard interface/system MIB. This MIB is deployed in enterprise IT environments running IBM systems-management agents on desktop or workstation fleets, where a central console polls many clients for inventory and uptime/availability reporting. Engineers can download the CLIENT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CLIENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- IBM-managed client workstations/desktops
Monitoring Examples
An administrator would walk clntSystemTable/clntSystemEntry indexed by clntSystemIndex to enumerate every managed client, reading clntSysName and clntSysDescr for identification and clntIpAddress for reachability. Polling clntSystemUpTime across the fleet reveals unexpected reboots (a sudden reset to zero), while clntMemorySize helps flag systems below a minimum spec. clntSystemStatus can be checked to catch a client transitioning to a non-operational state, and clntCommunity/clntAppnCpNetId support cross-referencing with SNA network management tools.
What Can Be Monitored
- client system uptime
- installed memory size
- system operational status
- system name and description
- IP address
- MIB-II support flag
This MIB depends on
Related MIBs
Imported Objects
From HOST-RESOURCES-MIB
| Boolean | |
| DateAndTime | |
| InternationalDisplayString | |
| KBytes | |
| ProductID |
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| TimeTicks | |
| enterprises |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| ibm | 1.3.6.1.4.1.2 | |||
| ibmProd | 1.3.6.1.4.1.2.6 | |||
| clientMgmtSubAgent | 1.3.6.1.4.1.2.6.50 | |||
| clntSystem | 1.3.6.1.4.1.2.6.50.1 | |||
| clntSystemTable | 1.3.6.1.4.1.2.6.50.1.1 | not-accessible | The (conceptual) table of client system information. | |
| clntSystemEntry | 1.3.6.1.4.1.2.6.50.1.1.1 | not-accessible | A (conceptual) entry for one logical entry of client system information. | |
| INT clntSystemIndex | 1.3.6.1.4.1.2.6.50.1.1.1.1 | INTEGER | read-only | A unique value for each client node known to the host. |
| STR clntSysName | 1.3.6.1.4.1.2.6.50.1.1.1.2 | DisplayString | read-only | An administratively assigned name for the client node. By convention, this is the client's fully qualified domain name. |
| STR clntSysDescr | 1.3.6.1.4.1.2.6.50.1.1.1.3 | DisplayString | read-only | A textual description of the client. This value should include the full name and version identification of the system's hardware type, software operating system, and networking software. It is mandatory that this only contain printable ASCII characters. |
| STR clntCommunity | 1.3.6.1.4.1.2.6.50.1.1.1.4 | DisplayString | read-only | Name of the community defined by the client. |
| STR clntIpAddress | 1.3.6.1.4.1.2.6.50.1.1.1.5 | DisplayString | read-only | An administratively assigned address for the client node. This is the Internet Address for the client. |
| STR clntAppnCpNetId | 1.3.6.1.4.1.2.6.50.1.1.1.6 | DisplayString | read-only | An administratively assigned address for the client node. This is the control point name and network ID. |
| KBY clntMemorySize | 1.3.6.1.4.1.2.6.50.1.1.1.7 | KBytes | read-only | The amount of physical main memory contained by the client. |
| TIK clntSystemUpTime | 1.3.6.1.4.1.2.6.50.1.1.1.8 | TimeTicks | read-only | The amount of time since the client was last initialized. |
| INT clntSystemStatus | 1.3.6.1.4.1.2.6.50.1.1.1.9 | INTEGER | read-only | A status indication for the client. |
| INT clntSupportMibII | 1.3.6.1.4.1.2.6.50.1.1.1.10 | INTEGER | read-only | An indication that the client supports MIB-2 objects. |
| INT clntSupportHostMib | 1.3.6.1.4.1.2.6.50.1.1.1.11 | INTEGER | read-only | An indication that the client supports Host Resources MIB objects. |
| INT clntSupportAppnMib | 1.3.6.1.4.1.2.6.50.1.1.1.12 | INTEGER | read-only | An indication that the client supports APPN MIB objects. |
| INT clntSupportDmiMib | 1.3.6.1.4.1.2.6.50.1.1.1.13 | INTEGER | read-only | An indication that the client supports DMI MIB objects. |
| DAT clntLastHwRefresh | 1.3.6.1.4.1.2.6.50.1.1.1.14 | DateAndTime | read-only | The last date at which the hardware information was refreshed for the client. If this information is not known, then this variable shall have the value corresponding to January 1, year 1970, 00:00:00.0, which is encoded as (hex)'07 B2 01 01 00 00 00 00'. |
| DAT clntLastSwRefresh | 1.3.6.1.4.1.2.6.50.1.1.1.15 | DateAndTime | read-only | The last date at which the software information was refreshed for the client. If this information is not known, then this variable shall have the value corresponding to January 1, year 1970, 00:00:00.0, which is encoded as (hex)'07 B2 01 01 00 00 00 00'. |
| STR clntSysContact | 1.3.6.1.4.1.2.6.50.1.1.1.16 | DisplayString | read-only | The textual identification of the contact person for the client, together with information on how to contact the person. |
| STR clntSysLocation | 1.3.6.1.4.1.2.6.50.1.1.1.17 | DisplayString | read-only | The physical location of the client (e.g., building, floor, telephone...). |
| STR clntMachineType | 1.3.6.1.4.1.2.6.50.1.1.1.18 | DisplayString | read-only | The machine type of the client. |
| STR clntMachineModel | 1.3.6.1.4.1.2.6.50.1.1.1.19 | DisplayString | read-only | The machine model of the client. |
| STR clntUserProfile | 1.3.6.1.4.1.2.6.50.1.1.1.20 | DisplayString | read-only | The user profile for the client. |
| STR clntOwner | 1.3.6.1.4.1.2.6.50.1.1.1.21 | DisplayString | read-only | The owner of the client. |
| STR clntOwnerPhone | 1.3.6.1.4.1.2.6.50.1.1.1.22 | DisplayString | read-only | The owner's phone number for the client. |
| STR clntOwnerOffice | 1.3.6.1.4.1.2.6.50.1.1.1.23 | DisplayString | read-only | The owner's office information for the client. |
| clntHardware | 1.3.6.1.4.1.2.6.50.2 | |||
| clntStorageTable | 1.3.6.1.4.1.2.6.50.2.1 | not-accessible | The (conceptual) table of logical storage areas on the client. An entry shall be placed in the storage table for each logical area of storage that is allocated and has fixed resource limits. The amount of storage represented in an entity is the amount actually usable by the requesting entity, and excludes loss due to formatting or file system reference information. These entries are associated with logical storage areas, as might be seen by an application, rather than physical storage entities which are typically seen by an operating system. Storage such as tapes and floppies without file systems on them are typically not allocated in chunks by the operating system to requesting applications, and therefore shouldn't appear in this table. Examples of valid storage for this table include disk partitions, file systems, ram (for some architectures this is further segmented into regular memory, extended memory, and so on), backing store for virtual memory ('swap space'). This table is intended to be a useful diagnostic for 'out of memory' and 'out of buffers' types of failures. In addition, it can be a useful performance monitoring tool for tracking memory, disk, or buffer usage. | |
| clntStorageEntry | 1.3.6.1.4.1.2.6.50.2.1.1 | not-accessible | A (conceptual) entry for one logical storage area on the client. The clntSystemIndex represents an entry in the clntSystemTable that corresponds to the clntStorageEntry. As an example, an instance of the clntStorageType object might be named hrStorageType.3.1 | |
| INT clntStorageIndex | 1.3.6.1.4.1.2.6.50.2.1.1.1 | INTEGER | read-only | A unique value for each logical storage area contained by the client. |
| OID clntStorageType | 1.3.6.1.4.1.2.6.50.2.1.1.2 | OBJECT IDENTIFIER | read-only | The type of storage represented by this entry. |
| STR clntStorageDescr | 1.3.6.1.4.1.2.6.50.2.1.1.3 | DisplayString | read-only | A description of the type and instance of the storage described by this entry. |
| INT clntStorageAllocationUnits | 1.3.6.1.4.1.2.6.50.2.1.1.4 | INTEGER | read-only | The size, in bytes, of the data objects allocated from this pool. If this entry is monitoring sectors, blocks, buffers, or packets, for example, this number will commonly be greater than one. Otherwise this number will typically be one. |
| INT clntStorageSize | 1.3.6.1.4.1.2.6.50.2.1.1.5 | INTEGER | read-only | The size of the storage represented by this entry, in units of clntStorageAllocationUnits. |
| INT clntStorageUsed | 1.3.6.1.4.1.2.6.50.2.1.1.6 | INTEGER | read-only | The amount of the storage represented by this entry that is allocated, in units of clntStorageAllocationUnits. |
| CTR clntStorageAllocationFailures | 1.3.6.1.4.1.2.6.50.2.1.1.7 | Counter | read-only | The number of requests for storage represented by this entry that could not be honored due to not enough storage. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. However, it is recommended that this object be initialized to zero. |
| clntDeviceTable | 1.3.6.1.4.1.2.6.50.2.2 | not-accessible | The (conceptual) table of devices contained by the client. | |
| clntDeviceEntry | 1.3.6.1.4.1.2.6.50.2.2.1 | not-accessible | A (conceptual) entry for one device contained by the client. | |
| INT clntDeviceIndex | 1.3.6.1.4.1.2.6.50.2.2.1.1 | INTEGER | read-only | A unique value for each device contained by the client. The value for each device must remain constant at least from one re-initialization of the agent to the next re-initialization. |
| OID clntDeviceType | 1.3.6.1.4.1.2.6.50.2.2.1.2 | OBJECT IDENTIFIER | read-only | An indication of the type of device. If this value is 'hrDeviceProcessor { hrDeviceTypes 3 }' then an entry exists in the clntProcessorTable which corresponds to this device. If this value is 'hrDeviceNetwork { hrDeviceTypes 4 }', then an entry exists in the clntNetworkTable which corresponds to this device. If this value is 'hrDevicePrinter { hrDeviceTypes 5 }', then an entry exists in the clntPrinterTable which corresponds to this device. If this value is 'hrDeviceDiskStorage { hrDeviceTypes 6 }', then an entry exists in the clntDiskStorageTable which corresponds to this device. |
| STR clntDeviceDescr | 1.3.6.1.4.1.2.6.50.2.2.1.3 | DisplayString | read-only | A textual description of this device, including the device's manufacturer and revision, and optionally, its serial number. |
| PRO clntDeviceID | 1.3.6.1.4.1.2.6.50.2.2.1.4 | ProductID | read-only | The product ID for this device. |
| INT clntDeviceStatus | 1.3.6.1.4.1.2.6.50.2.2.1.5 | INTEGER | read-only | The current operational state of the device described by this row of the table. A value unknown(1) indicates that the current state of the device is unknown. running(2) indicates that the device is up and running and that no unusual error conditions are known. The warning(3) state indicates that agent has been informed of an unusual error condition by the operational software (e.g., a disk device driver) but that the device is still 'operational'. An example would be high number of soft errors on a disk. A value of testing(4), indicates that the device is not available for use because it is in the testing state. The state of down(5) is used only when the agent has been informed that the device is not available for any use. |
| CTR clntDeviceErrors | 1.3.6.1.4.1.2.6.50.2.2.1.6 | Counter | read-only | The number of errors detected on this device. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. However, it is recommended that this object be initialized to zero. |
| clntProcessorTable | 1.3.6.1.4.1.2.6.50.2.3 | not-accessible | The (conceptual) table of processors contained by the client. Note that this table is potentially sparse: a (conceptual) entry exists only if the correspondent value of the clntDeviceType object is 'hrDeviceProcessor'. | |
| clntProcessorEntry | 1.3.6.1.4.1.2.6.50.2.3.1 | not-accessible | A (conceptual) entry for one processor contained by the client. The clntSystemIndex, which represents an entry in the clntSystemTable, and the clntDeviceIndex, which represents an entry in the clntDeviceTable, combined corresponds to the clntProcessorEntry. As an example of how objects in this table are named, an instance of the clntProcessorFrwID object might be named clntProcessorFrwID.3.1 | |
| PRO clntProcessorFrwID | 1.3.6.1.4.1.2.6.50.2.3.1.1 | ProductID | read-only | The product ID of the firmware associated with the processor. |
| INT clntProcessorLoad | 1.3.6.1.4.1.2.6.50.2.3.1.2 | INTEGER | read-only | The average, over the last minute, of the percentage of time that this processor was not idle. |
| clntNetworkTable | 1.3.6.1.4.1.2.6.50.2.4 | not-accessible | The (conceptual) table of network devices contained by the client. Note that this table is potentially sparse: a (conceptual) entry exists only if the correspondent value of the clntDeviceType object is 'hrDeviceNetwork'. | |
| clntNetworkEntry | 1.3.6.1.4.1.2.6.50.2.4.1 | not-accessible | A (conceptual) entry for one network device contained by the client. The clntSystemIndex, which represents an entry in the clntSystemTable, and the clntDeviceIndex, which represents an entry in the clntDeviceTable, combined corresponds to the clntNetworkEntry. As an example of how objects in this table are named, an instance of the clntNetworkIfIndex object might be named clntNetworkIfIndex.3.1 | |
| INT clntNetworkIfIndex | 1.3.6.1.4.1.2.6.50.2.4.1.1 | INTEGER | read-only | The value of ifIndex which corresponds to this network device. |
| clntPrinterTable | 1.3.6.1.4.1.2.6.50.2.5 | not-accessible | The (conceptual) table of printers local to the client. Note that this table is potentially sparse: a (conceptual) entry exists only if the correspondent value of the clntDeviceType object is 'hrDevicePrinter'. | |
| clntPrinterEntry | 1.3.6.1.4.1.2.6.50.2.5.1 | not-accessible | A (conceptual) entry for one printer local to the client. The clntSystemIndex, which represents an entry in the clntSystemTable, and the clntDeviceIndex, which represents an entry in the clntDeviceTable, combined corresponds to the clntPrinterEntry. As an example of how objects in this table are named, an instance of the clntPrinterStatus object might be named clntPrinterStatus.3.1 | |
| INT clntPrinterStatus | 1.3.6.1.4.1.2.6.50.2.5.1.1 | INTEGER | read-only | The current status of this printer device. When in the idle(3), printing(4), or warmup(5) state, the corresponding clntDeviceStatus should be running(2) or warning(3). When in the unknown state, the corresponding clntDeviceStatus should be unknown(1). |
| OCT clntPrinterDetectedErrorState | 1.3.6.1.4.1.2.6.50.2.5.1.2 | OCTET STRING | read-only | This object represents any error conditions detected by the printer. The error conditions are encoded as bits in an octet string, with the following definitions: Condition Bit # clntDeviceStatus lowPaper 0 warning(3) noPaper 1 down(5) lowToner 2 warning(3) noToner 3 down(5) doorOpen 4 down(5) jammed 5 down(5) offline 6 down(5) serviceRequested 7 warning(3) If multiple conditions are currently detected and the clntDeviceStatus would not otherwise be unknown(1) or testing(4), the clntDeviceStatus shall correspond to the worst state of those indicated, where down(5) is worse than warning(3) which is worse than running(2). Bits are numbered starting with the most significant bit of the first byte being bit 0, the least significant bit of the first byte being bit 7, the most significant bit of the second byte being bit 8, and so on. A one bit encodes that the condition was detected, while a zero bit encodes that the condition was not detected. This object is useful for alerting an operator to specific warning or error conditions that may occur, especially those requiring human intervention. |
| clntDiskStorageTable | 1.3.6.1.4.1.2.6.50.2.6 | not-accessible | The (conceptual) table of long-term storage devices contained by the client. In particular, disk devices accessed remotely over a network are not included here. Note that this table is potentially sparse: a (conceptual) entry exists only if the correspondent value of the clntDeviceType object is 'hrDeviceDiskStorage'. | |
| clntDiskStorageEntry | 1.3.6.1.4.1.2.6.50.2.6.1 | not-accessible | A (conceptual) entry for one long-term storage device contained by the client. The clntSystemIndex, which represents an entry in the clntSystemTable, and the clntDeviceIndex, which represents an entry in the clntDeviceTable, combined corresponds to the clntDiskStorageEntry. As an example of how objects in this table are named, an instance of the clntDiskStorageCapacity object might be named clntDiskStorageCapacity.3.1 | |
| INT clntDiskStorageAccess | 1.3.6.1.4.1.2.6.50.2.6.1.1 | INTEGER | read-only | An indication if this long-term storage device is readable and writable or only readable. This should reflect the media type, any write protect mechanism, and any device configuration that affects the entire device. |
| INT clntDiskStorageMedia | 1.3.6.1.4.1.2.6.50.2.6.1.2 | INTEGER | read-only | An indication of the type of media used in this long-term storage device. |
| BOO clntDiskStorageRemoveble | 1.3.6.1.4.1.2.6.50.2.6.1.3 | Boolean | read-only | Denotes whether or not the disk media may be removed from the drive. |
| KBY clntDiskStorageCapacity | 1.3.6.1.4.1.2.6.50.2.6.1.4 | KBytes | read-only | The total size for this long-term storage device. |
| clntPartitionTable | 1.3.6.1.4.1.2.6.50.2.7 | not-accessible | The (conceptual) table of partitions for long-term storage devices contained by the client. In particular, partitions accessed remotely over a network are not included here. | |
| clntPartitionEntry | 1.3.6.1.4.1.2.6.50.2.7.1 | not-accessible | A (conceptual) entry for one partition. The clntSystemIndex, which represents an entry in the clntSystemTable, and the clntDeviceIndex, which represents an entry in the clntDeviceTable, combined corresponds to the clntPartitionEntry. As an example of how objects in this table are named, an instance of the clntPartitionSize object might be named clntPartitionSize.3.1.1 | |
| INT clntPartitionIndex | 1.3.6.1.4.1.2.6.50.2.7.1.1 | INTEGER | read-only | A unique value for each partition on this long- term storage device. The value for each long-term storage device must remain constant at least from one re-initialization of the agent to the next re-initialization. |
| NUM clntPartitionLabel | 1.3.6.1.4.1.2.6.50.2.7.1.2 | InternationalDisplayString | read-only | A textual description of this partition. |
| OCT clntPartitionID | 1.3.6.1.4.1.2.6.50.2.7.1.3 | OCTET STRING | read-only | A descriptor which uniquely represents this partition to the responsible operating system. On some systems, this might take on a binary representation. |
| KBY clntPartitionSize | 1.3.6.1.4.1.2.6.50.2.7.1.4 | KBytes | read-only | The size of this partition. |
| INT clntPartitionFSIndex | 1.3.6.1.4.1.2.6.50.2.7.1.5 | INTEGER | read-only | The index of the file system mounted on this partition. If no file system is mounted on this partition, then this value shall be zero. Note that multiple partitions may point to one file system, denoting that that file system resides on those partitions. Multiple file systems may not reside on one partition. |
| clntFSTable | 1.3.6.1.4.1.2.6.50.2.8 | not-accessible | The (conceptual) table of file systems local to this client or remotely mounted from a file server. File systems that are in only one user's environment on a multi-user system will not be included in this table. | |
| clntFSEntry | 1.3.6.1.4.1.2.6.50.2.8.1 | not-accessible | A (conceptual) entry for one file system local to this client or remotely mounted from a file server. File systems that are in only one user's environment on a multi-user system will not be included in this table. As an example of how objects in this table are named, an instance of the clntFSMountPoint object might be named clntFSMountPoint.3.1 | |
| INT clntFSIndex | 1.3.6.1.4.1.2.6.50.2.8.1.1 | INTEGER | read-only | A unique value for each file system local to this client. The value for each file system must remain constant at least from one re-initialization of the agent to the next re-initialization. |
| NUM clntFSMountPoint | 1.3.6.1.4.1.2.6.50.2.8.1.2 | InternationalDisplayString | read-only | The path name of the root of this file system. |
| NUM clntFSRemoteMountPoint | 1.3.6.1.4.1.2.6.50.2.8.1.3 | InternationalDisplayString | read-only | A description of the name and/or address of the server that this file system is mounted from. This may also include parameters such as the mount point on the remote file system. If this is not a remote file system, this string should have a length of zero. |
| OID clntFSType | 1.3.6.1.4.1.2.6.50.2.8.1.4 | OBJECT IDENTIFIER | read-only | The value of this object identifies the type of this file system. |
| INT clntFSAccess | 1.3.6.1.4.1.2.6.50.2.8.1.5 | INTEGER | read-only | An indication if this file system is logically configured by the operating system to be readable and writable or only readable. This does not represent any local access-control policy, except one that is applied to the file system as a whole. |
| BOO clntFSBootable | 1.3.6.1.4.1.2.6.50.2.8.1.6 | Boolean | read-only | A flag indicating whether this file system is bootable. |
| INT clntFSStorageIndex | 1.3.6.1.4.1.2.6.50.2.8.1.7 | INTEGER | read-only | The index of the clntStorageEntry that represents information about this file system. If there is no such information available, then this value shall be zero. The relevant storage entry will be useful in tracking the percent usage of this file system and diagnosing errors that may occur when it runs out of space. |
| DAT clntFSLastFullBackupDate | 1.3.6.1.4.1.2.6.50.2.8.1.8 | DateAndTime | read-write | The last date at which this complete file system was copied to another storage device for backup. This information is useful for ensuring that backups are being performed regularly. If this information is not known, then this variable shall have the value corresponding to January 1, year 1970, 00:00:00.0, which is encoded as (hex)'07 B2 01 01 00 00 00 00'. |
| DAT clntFSLastPartialBackupDate | 1.3.6.1.4.1.2.6.50.2.8.1.9 | DateAndTime | read-write | The last date at which a portion of this file system was copied to another storage device for backup. This information is useful for ensuring that backups are being performed regularly. If this information is not known, then this variable shall have the value corresponding to January 1, year 1970, 00:00:00.0, which is encoded as (hex)'07 B2 01 01 00 00 00 00'. |
| clntSoftware | 1.3.6.1.4.1.2.6.50.3 | |||
| clntSWInstalledTable | 1.3.6.1.4.1.2.6.50.3.1 | not-accessible | The (conceptual) table of software installed on the client. | |
| clntSWInstalledEntry | 1.3.6.1.4.1.2.6.50.3.1.1 | not-accessible | A (conceptual) entry for a piece of software installed on the client. The clntSystemIndex represents an entry in the clntSystemTable that corresponds to the clntSWInstalledEntry. | |
| INT clntSWInstalledIndex | 1.3.6.1.4.1.2.6.50.3.1.1.1 | INTEGER | read-only | A unique value for each piece of software installed on the client. |
| STR clntSWInstalledManf | 1.3.6.1.4.1.2.6.50.3.1.1.2 | DisplayString | read-only | A textual description of the manufacturer for this installed piece of software. If this information is not known, this string should have a length of zero. |
| PRO clntSWInstalledID | 1.3.6.1.4.1.2.6.50.3.1.1.3 | ProductID | read-only | The product ID of this installed piece of software. |
| STR clntSWInstalledVersion | 1.3.6.1.4.1.2.6.50.3.1.1.4 | DisplayString | read-only | The version of this installed piece of software. If this information is not known, this string should have a length of zero. |
| DAT clntSWInstalledDateTime | 1.3.6.1.4.1.2.6.50.3.1.1.5 | DateAndTime | read-only | The last modification date of this application as it would appear in a directory listing. If this information is not known, then this variable shall have the value corresponding to January 1, year 1970, 00:00:00.0, which is encoded as (hex)'07 B2 01 01 00 00 00 00'. |
| INT clntSWInstalledType | 1.3.6.1.4.1.2.6.50.3.1.1.6 | INTEGER | read-only | The type of this software. |
| STR clntSWInstalledPath | 1.3.6.1.4.1.2.6.50.3.1.1.7 | DisplayString | read-only | The path where this piece of software is installed. This should be the fully qualified path on the client. |
| STR clntSWInstalledOption | 1.3.6.1.4.1.2.6.50.3.1.1.8 | DisplayString | read-only | The option of the software installed. |
| STR clntSWInstalledLoad | 1.3.6.1.4.1.2.6.50.3.1.1.9 | DisplayString | read-only | The load of the software installed. |
| INT clntSWInstalledStatus | 1.3.6.1.4.1.2.6.50.3.1.1.10 | INTEGER | read-only | The current state of the software installed. |
| STR clntSWInstalledSoftwareName | 1.3.6.1.4.1.2.6.50.3.1.1.11 | DisplayString | read-only | The Software Name of this installed piece of software. If this information is not known, this string should have a length of zero. |
| STR clntSWInstalledSerialNumber | 1.3.6.1.4.1.2.6.50.3.1.1.12 | DisplayString | read-only | The Serial Number of this installed piece of software. If this information is not known, this string should have a length of zero. |
| clntSWFixTable | 1.3.6.1.4.1.2.6.50.3.3 | not-accessible | The (conceptual) table of software fixes on the client. | |
| clntSWFixEntry | 1.3.6.1.4.1.2.6.50.3.3.1 | not-accessible | A (conceptual) entry for each software fix on the client. The clntSystemIndex, which represents an entry in the clntSystemTable, and the clntSWInstalledIndex, which represents an entry in the clntSWInstalledTable, combined corresponds to the clntSWFixEntry. | |
| INT clntSWFixIndex | 1.3.6.1.4.1.2.6.50.3.3.1.1 | INTEGER | read-only | A unique value for each software fix installed on this client. |
| STR clntSWFixID | 1.3.6.1.4.1.2.6.50.3.3.1.2 | DisplayString | read-only | A value which identifies a fix to a piece of installed software. |
RFC description
Monitors client system information including hardware, software, and network configuration for IBM managed nodes.
Start monitoring IBM-managed client workstation/desktop with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.