All MIBs › CISCO-OPTICAL-OTS-MIB › cooOtsOchControllerAlarmState
cooOtsOchControllerAlarmState
Module: CISCO-OPTICAL-OTS-MIB
OID (symbolic): CISCO-OPTICAL-OTS-MIB::cooOtsOchControllerAlarmState
OID (numeric): 1.3.6.1.4.1.9.9.834.1.1.3.1.12
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: This object indicates the current alarms status of the Optics layer. Alarms description : noDefect : No alarms highRXPwr : Input optical power reading over the fail-high threshold highTXPwr : Output optical power reading over the fail-high threshold lowRXPwr : Input optical power reading below the fail-low threshold lowTXPwr : Output optical power reading below the fail-low threshold lospRXPwr : Loss of optical power signal locRXPwr : Loss of optical continuity degLowGain : Amplifier gain degrade low degHighGain : Amplifier gain degrade high alsAmp : Amplifier automatic laser shutdown for safety reason aprAmp : Amplifier automatic power reduction noEqAutoAmp : Channels power not equalized for amplifier automatic control mode misAutoAmp : Misconfiguration for amplifier automatic control mode switchToProtect : Protected port switching to active role
What is cooOtsOchControllerAlarmState?
Reports the current alarm condition of the optical layer on an OTS-OCH channel interface, such as no defect, high/low receive power, or high/low transmit power alarms.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.834.1.1.3.1.12 snmpwalk -v2c -c public <target> CISCO-OPTICAL-OTS-MIB::cooOtsOchControllerAlarmState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.834.1.1.3.1.12.1 snmpget -v2c -c public <target> CISCO-OPTICAL-OTS-MIB::cooOtsOchControllerAlarmState.1
Start monitoring Cisco DWDM optical transport/line system (ONS/NCS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-OPTICAL-OTS-MIB::cooOtsOchControllerAlarmState OID value, configure state conditions and alerts, and monitor any Cisco DWDM optical transport/line system (ONS/NCS) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.834 | ciscoOpticalOtsMIB | CISCO-OPTICAL-OTS-MIB |
| 1.3.6.1.4.1.9.9.834.1 | ciscoOpticalOtsMIBObjects | CISCO-OPTICAL-OTS-MIB |
| 1.3.6.1.4.1.9.9.834.1.1 | cooOtsController | CISCO-OPTICAL-OTS-MIB |
| 1.3.6.1.4.1.9.9.834.1.1.3 | cooOtsOchControllerTable | CISCO-OPTICAL-OTS-MIB |
| 1.3.6.1.4.1.9.9.834.1.1.3.1 | cooOtsOchControllerEntry | CISCO-OPTICAL-OTS-MIB |
| 1.3.6.1.4.1.9.9.834.1.1.3.1.12 | cooOtsOchControllerAlarmState | CISCO-OPTICAL-OTS-MIB |