CISCO-NHRP-EXT-MIB :: cneNotifEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-NHRP-EXT-MIB › cneNotifEnable

cneNotifEnable

Module: CISCO-NHRP-EXT-MIB

OID (symbolic): CISCO-NHRP-EXT-MIB::cneNotifEnable

OID (numeric): 1.3.6.1.4.1.9.9.680.1.4.1

Node type: OBJECT-TYPE

Type: Bits

Access: read-write

Description: This object is used to control the generation of notifications defined in this MIB. The bits when set to 1 or 0 respectively enable or disable the corresponding notification. The mapping between the bits and the notifications are as follows.

nextHopRegServerUp(0): This bit enables/disables the cneNotifNextHopRegServerUp notification. nextHopRegServerDown(1): This bit enables/disables the cneNotifNextHopRegServerDown notification. nextHopRegClientUp(2): This bit enables/disables the cneNotifNextHopRegClientUp notification. nextHopRegClientDown(3): This bit enables/disables the cneNotifNextHopRegClientDown notification. nextHopPeerUp(4): This bit enables/disables the cneNotifNextHopPeerUp notification. nextHopPeerDown(5): This bit enables/disables the cneNotifNextHopPeerDown notification. rateLimitExceeded(6): This bit enables/disables the cneNotifRateLimitExceeded notification.

What is cneNotifEnable?

This read-write bitmask setting controls which NHRP-related notifications (such as next-hop registration server up/down events) are enabled or disabled, with each bit toggling a specific notification type.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.680.1.4.1
snmpwalk -v2c -c public <target> CISCO-NHRP-EXT-MIB::cneNotifEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.680.1.4.1.1
snmpget -v2c -c public <target> CISCO-NHRP-EXT-MIB::cneNotifEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.680.1.4.1.1 s <value>

Start monitoring Cisco routers running NHRP (e.g. DMVPN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-NHRP-EXT-MIB::cneNotifEnable OID value, configure state conditions and alerts, and monitor any Cisco routers running NHRP (e.g. DMVPN) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.680ciscoNhrpExtMIBCISCO-NHRP-EXT-MIB
1.3.6.1.4.1.9.9.680.1cneObjectsCISCO-NHRP-EXT-MIB
1.3.6.1.4.1.9.9.680.1.4cneNotificationControlObjectsCISCO-NHRP-EXT-MIB
1.3.6.1.4.1.9.9.680.1.4.1cneNotifEnableCISCO-NHRP-EXT-MIB