All MIBs › CISCO-MGX82XX-TRAPS-MIB › trapAusmChannelAlarm

trapAusmChannelAlarm

OID (symbolic): CISCO-MGX82XX-TRAPS-MIB::trapAusmChannelAlarm

OID (numeric): 1.3.6.1.4.1.351.110.0.50918

Node type: NOTIFICATION-TYPE

Description: Sent when an AUSM logical channel is in Alarm, i.e. the channel can pass traffic within the PNNI n/w but is in Alarm because of CPE connectivity, or the line being in alarm. This trap is not applicable to MGX Release 1.x.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' CISCO-MGX82XX-TRAPS-MIB::trapAusmChannelAlarm
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.351.110.0.50918

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:64153->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (396647065) 45 days, 21:47:50.65
  SNMPv2-MIB::snmpTrapOID.0 = OID: CISCO-MGX82XX-TRAPS-MIB::trapAusmChannelAlarm

Start monitoring Cisco MGX 8200 series WAN switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-TRAPS-MIB::trapAusmChannelAlarm OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 series WAN switch (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.351	stratacom	CISCOWAN-SMI
1.3.6.1.4.1.351.110	basis	BASIS-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.351.110.0.50918	trapAusmChannelAlarm	CISCO-MGX82XX-TRAPS-MIB

CISCO-MGX82XX-TRAPS-MIB :: trapAusmChannelAlarm

trapAusmChannelAlarm

Module

This MIB depends on