CISCO-DOT11-ASSOCIATION-MIB :: cDot11ClientDataRateSet

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-DOT11-ASSOCIATION-MIBcDot11ClientDataRateSet

cDot11ClientDataRateSet

Module: CISCO-DOT11-ASSOCIATION-MIB

OID (symbolic): CISCO-DOT11-ASSOCIATION-MIB::cDot11ClientDataRateSet

OID (numeric): 1.3.6.1.4.1.9.9.273.1.2.1.1.11

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: This is the set of data rates at which this client can transmit and receive data. Each client can support up to 126 rates. Each octet contains an integer value representing one of these 126 rates. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s, This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the client desires to synchronize is suitable. It is also used when starting a BSS.

What is cDot11ClientDataRateSet?

Lists the set of data rates (up to 126) that the wireless client is capable of using to transmit and receive data, encoded as an octet string of rate values.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.273.1.2.1.1.11
snmpwalk -v2c -c public <target> CISCO-DOT11-ASSOCIATION-MIB::cDot11ClientDataRateSet

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.273.1.2.1.1.11.1
snmpget -v2c -c public <target> CISCO-DOT11-ASSOCIATION-MIB::cDot11ClientDataRateSet.1

Start monitoring Cisco Aironet-family wireless access points and bridges with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOT11-ASSOCIATION-MIB::cDot11ClientDataRateSet OID value, configure state conditions and alerts, and monitor any Cisco Aironet-family wireless access points and bridges from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.273ciscoDot11AssociationMIBCISCO-DOT11-ASSOCIATION-MIB
1.3.6.1.4.1.9.9.273.1ciscoDot11AssocMIBObjectsCISCO-DOT11-ASSOCIATION-MIB
1.3.6.1.4.1.9.9.273.1.2cDot11ClientConfigurationCISCO-DOT11-ASSOCIATION-MIB
1.3.6.1.4.1.9.9.273.1.2.1cDot11ClientConfigInfoTableCISCO-DOT11-ASSOCIATION-MIB
1.3.6.1.4.1.9.9.273.1.2.1.1cDot11ClientConfigInfoEntryCISCO-DOT11-ASSOCIATION-MIB
1.3.6.1.4.1.9.9.273.1.2.1.1.11cDot11ClientDataRateSetCISCO-DOT11-ASSOCIATION-MIB