CISCO-ATM-CONN-INFO-MIB

All MIBs › CISCO-ATM-CONN-INFO-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2003-06-16

Category: ATM

Description: Provides extended connection information for ATM PVCs and SVCs on Cisco ATM devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-ATM-CONN-INFO-MIB?

CISCO-ATM-CONN-INFO-MIB is a Cisco enterprise MIB that provides extended connection information for ATM interfaces, covering permanent and switched virtual channels/paths (PVC/SVC/SPVC/SPVP), point-to-point and point-to-multipoint connections, and DAX (same-switch) connections. It exposes counts of configured and possible connections/endpoints along with per-connection endpoint category and general connection details. Its monitoring value is in tracking ATM connection capacity and utilization: operators can see total configured versus maximum possible connections/endpoints to detect a switch approaching its ATM connection scaling limits, and inspect individual connection entries to verify endpoint category and type. It is a Cisco enterprise extension layered on top of standard ATM MIB concepts (e.g., ATM-MIB) rather than a standalone standard. It is deployed on Cisco ATM switches and routers in networks still running ATM-based transport or interworking. Network engineers evaluating or troubleshooting this functionality can download the CISCO-ATM-CONN-INFO-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-ATM-CONN-INFO-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco ATM switch/router

Monitoring Examples

An operator would compare caciP2pTotalConfConns against caciP2pMaxPossibleConns, and caciTotalEndpoints against caciMaxPossibleEndpoints, to detect an ATM switch nearing its maximum supported connection/endpoint capacity; inspecting caciConnInfoTable entries for caciGeneralConnEPCategory would help distinguish PVC, SVC, or DAX connections when diagnosing why a new circuit provisioning attempt failed due to caciNumUsedConns reaching its limit.

What Can Be Monitored

configured vs. maximum possible connections
configured vs. maximum possible endpoints
connection endpoint category
used connection count

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
caciAtmConnInfo	1.3.6.1.4.1.9.9.9999.1.1
NUM caciATMEndpointCategory	1.3.6.1.4.1.9.9.9999.1.1.6.4.1.1	CaciATMEndpointCategory	not-accessible	Endpoint category corresponding to CaciATMEndpointCategory.
caciConnInfoEntry	1.3.6.1.4.1.9.9.9999.1.1.1.1.1		not-accessible	An entry in the caciConnInfoTable. Each entry in ifTable with ifType values: atm(37), atmLogical(80) or atmVirtual(149) has an associated entry in this table.
caciConnInfoTable	1.3.6.1.4.1.9.9.9999.1.1.1.1		not-accessible	The Connection Statistics table. This table has the number of connections per interface.
CAC caciGeneralConnEPCategory	1.3.6.1.4.1.9.9.9999.1.1.1.1.1.1	CaciGeneralConnEPCategory	not-accessible	The general connection or endpoint category on this ATM switch.
caciGeneric	1.3.6.1.4.1.9.9.9999.1.1.6
caciGenericEndpointEntry	1.3.6.1.4.1.9.9.9999.1.1.6.4.1		not-accessible	An entry in the table specifying the number of connections for the corresponding CaciATMEndpointCategory.
caciGenericEndpointTable	1.3.6.1.4.1.9.9.9999.1.1.6.4		not-accessible	The table contains number of connection per CaciATMEndpointCategory.
caciIfInfo	1.3.6.1.4.1.9.9.9999.1.1.1
U32 caciMaxPossibleEndpoints	1.3.6.1.4.1.9.9.9999.1.1.6.3	Unsigned32	read-only	This object specifies the upper limit of all the possible endpoints that are allowed to be configured on this ATM switch.
caciMIBNotifications	1.3.6.1.4.1.9.9.9999.0
caciMIBObjects	1.3.6.1.4.1.9.9.9999.1
G32 caciNumUsedConns	1.3.6.1.4.1.9.9.9999.1.1.1.1.1.2	Gauge32	read-only	This object specifies the total number of used connections of type caciGeneralConnEPCategory on this interface.
CAC caciP2mpConnectionCategory	1.3.6.1.4.1.9.9.9999.1.1.5.1.1.1	CaciP2mpConnCategory	not-accessible	The point to multi point connection category.
caciP2mpConnEntry	1.3.6.1.4.1.9.9.9999.1.1.5.1.1		not-accessible	An entry in the table specifying the number of connections for the corresponding CaciP2mpConnCategory.
caciP2mpConns	1.3.6.1.4.1.9.9.9999.1.1.5
caciP2mpConnTable	1.3.6.1.4.1.9.9.9999.1.1.5.1		not-accessible	The table contains number of connection per CaciP2mpConnCategory.
G32 caciP2mpTotalConfConns	1.3.6.1.4.1.9.9.9999.1.1.5.1.1.2	Gauge32	read-only	The total number of P2mp connections of type CaciP2mpConnCategory configured on this ATM switch.
CAC caciP2pConnectionCategory	1.3.6.1.4.1.9.9.9999.1.1.2.1.1.1	CaciP2pConnCategory	not-accessible	The connection category.
caciP2pConnEntry	1.3.6.1.4.1.9.9.9999.1.1.2.1.1		not-accessible	An entry in the table specifying the number of connections for the corresponding CaciP2pConnCategory.
caciP2pConns	1.3.6.1.4.1.9.9.9999.1.1.2
caciP2pConnTable	1.3.6.1.4.1.9.9.9999.1.1.2.1		not-accessible	The table contains number of connection per CaciP2pConnCategory.
caciP2pEndpointEntry	1.3.6.1.4.1.9.9.9999.1.1.3.1.1		not-accessible	An entry in the table specifying the number of endpoints for the corresponding CaciP2pEndpointCategory.
caciP2pEndpoints	1.3.6.1.4.1.9.9.9999.1.1.3
caciP2pEndpointTable	1.3.6.1.4.1.9.9.9999.1.1.3.1		not-accessible	The table contains number of endpoints per CaciP2pEndpointCategory.
NUM caciP2pEndptCategory	1.3.6.1.4.1.9.9.9999.1.1.3.1.1.1	CaciP2pEndpointCategory	not-accessible	The point to point endpoint category.
caciP2pIntEndpointEntry	1.3.6.1.4.1.9.9.9999.1.1.4.1.1		not-accessible	An entry in the table specifying the number of endpoints for the corresponding CaciP2pIntEndpointCategory.
caciP2pIntEndpoints	1.3.6.1.4.1.9.9.9999.1.1.4
caciP2pIntEndpointTable	1.3.6.1.4.1.9.9.9999.1.1.4.1		not-accessible	The table contains number of endpoints per CaciP2pIntEndpointCategory.
NUM caciP2pIntEndptCategory	1.3.6.1.4.1.9.9.9999.1.1.4.1.1.1	CaciP2pIntEndpointCategory	not-accessible	The point to point intermediate endpoint category.
U32 caciP2pMaxPossibleConns	1.3.6.1.4.1.9.9.9999.1.1.6.2	Unsigned32	read-only	This object specifies the upper limit of the point to point and point to multipoint connections that are allowed to be configured on this ATM switch.
U32 caciP2pTotalConfConns	1.3.6.1.4.1.9.9.9999.1.1.6.1	Unsigned32	read-only	This object specifies the total point to point connections that are configured on this ATM switch.
G32 caciP2pTotalConfEndpoints	1.3.6.1.4.1.9.9.9999.1.1.3.1.1.2	Gauge32	read-only	The number of total P2p enpoints of type CaciP2pEndpointCategory configured on this ATM switch.
G32 caciP2pTotalConns	1.3.6.1.4.1.9.9.9999.1.1.2.1.1.2	Gauge32	read-only	The total number of P2p connections of type CaciP2pConnCategory configured on this ATM switch.
G32 caciP2pTotalIntEndpoints	1.3.6.1.4.1.9.9.9999.1.1.4.1.1.2	Gauge32	read-only	The total number of P2p intermediate enpoints of type CaciP2pIntEndpointCategory present on this ATM switch.
G32 caciTotalEndpoints	1.3.6.1.4.1.9.9.9999.1.1.6.4.1.2	Gauge32	read-only	The total number of endpoints of caciATMEndpointCategory configured on this ATM switch.
ciscoAtmConnInfoMIB	1.3.6.1.4.1.9.9.9999			The MIB module for providing the parameters configured on an ATM interface. Terminologies used: SVC : Switched Virtual Channel SPVC : Soft Permanent Virtual Circuit SPVP : Soft Permanent Virtual Path SVPC : Switched Virtual Path Connection DAX : Connection with endpoints on the same ATM switch P2p : Point-to-point connection P2mp : Point-to-multi-point connection Root : The root of point-to-multipoint connection, which is associated with a VPI/VCI Leaf : Usually one point-to-multipoint connection consists of one root and one or more leaves. Leaf is the branch point for point to multipoint connection that is associated with a VPI/VCI Party: One or more party is associated with each leaf, all parties are associated with the same VPI/VCI that its leaf belongs to Source Via Node Destination ------- ------- ------- A\| \|B C\| \|D E\| \|F --+-----+----------+-----+------------+-----+-- \| \| \| \| \| \| ------- ------- ------- Each active connection has two terminating endpoints. In the above diagram, Endpoints A and F are terminating. Of these the master endpoint of the connection initiates the routing of the call and is considered the calling party. The slave endpoint is the called party which receives calls and is the destination of a call. Any endpoints that are created either on Via nodes or on the node with the terminating endpoint in order to have a complete connections between endpoints A and F are said to be intermediate endpoints. In the above diagram, endpoints B, C, D and E are intermediate endpoints.
ciscoAtmConnInfoMIBCompliance	1.3.6.1.4.1.9.9.9999.2.1.1			The Compliance statement for ciscoAtm management group.
ciscoAtmConnInfoMIBCompliances	1.3.6.1.4.1.9.9.9999.2.1
ciscoAtmConnInfoMIBConformance	1.3.6.1.4.1.9.9.9999.2
ciscoAtmConnInfoMIBGroups	1.3.6.1.4.1.9.9.9999.2.2
ciscoConnInfoConfMIBGroup	1.3.6.1.4.1.9.9.9999.2.2.1			Objects used for representing connection statistical details about an interface.
ciscoP2mpConnsMIBGroup	1.3.6.1.4.1.9.9.9999.2.2.5			Objects used for representing the point to multi point connections of a particular CaP2mpConnCategory.
ciscoP2pConnsMIBGroup	1.3.6.1.4.1.9.9.9999.2.2.2			Objects used for representing the point to point connections of a particular CaP2pConnCategory.
ciscoP2pEndpointsMIBGroup	1.3.6.1.4.1.9.9.9999.2.2.3			Objects used for representing the point to point endpoints of a particular CaP2pEndpointCategory.
ciscoP2pIntEndpointsMIBGroup	1.3.6.1.4.1.9.9.9999.2.2.4			Objects used for representing the point to point intermediate endpoints of a particular CaP2pIntEndpointCategory.
ciscoTotalConnsMIBGroup	1.3.6.1.4.1.9.9.9999.2.2.6			Objects used for representing the total connections on the ATM switch.
ciscoTotalEndpointsMIBGroup	1.3.6.1.4.1.9.9.9999.2.2.7			Objects used for representing the total endpoints on the ATM switch.

RFC description

Manages ATM connection parameters on Cisco devices including SVC, SPVC, and multipoint connection configuration.

Start monitoring Cisco ATM switch/router with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-ATM-CONN-INFO-MIB

What Is CISCO-ATM-CONN-INFO-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description