| OID symbolic | OID numeric | Type | Access | Description |
|---|
| fdbGroup | 1.3.6.1.4.1.930.2.1.2.22 | | | |
| INT fdbRemoteAgingTimer | 1.3.6.1.4.1.930.2.1.2.22.1 | INTEGER | read-write | The timeout period in seconds for aging out dynamically
learned remote (off-ring) stations. The default value is
300 seconds. |
| OCT fdbTableFlush | 1.3.6.1.4.1.930.2.1.2.22.2 | OCTET STRING | read-write | When read, this object returns a zero length string.
If set, the octets describe which stations to flush. All
4 octets must be specified. The encoding of the octet string
follows:
octet 1: the fdb type identifier to flush, unknown (1)
indicates flush any fdb type.
octet 2: 0x0 to flush remote stations
0x1 to flush local stations
0x2 to flush all stations
octet 3: the card number to flush, a value of 0xff will
flush all cards.
octet 4: the port number to flush, a value of 0xff will
flush all ports. |
| fdbTable | 1.3.6.1.4.1.930.2.1.2.22.3 | | not-accessible | This table contains fdb information for each station
known to the system, one entry per station. Static stations
may be created by setting fdbStatus to be valid. The
index of fdbStatus will contains infomation on the
station type, stationAddress, stationCard and stationPort.
Entries may be subsequently modified by
setting the appropriate object for the entry. Entries are
deleted by clearing stationInUse. |
| fdbEntry | 1.3.6.1.4.1.930.2.1.2.22.3.1 | | not-accessible | An list of station information for each station known to
the system. Static stations may be configured by properly
specifying at least the fdbType, fdbAddress,
fdbCard and fdbPort. |
| FDB fdbType | 1.3.6.1.4.1.930.2.1.2.22.3.1.1 | FdbTypeId | read-only | The type of the station. Station address are represented
in the canonical form as specified by their type. |
| PHY fdbAddress | 1.3.6.1.4.1.930.2.1.2.22.3.1.2 | PhysAddress | read-only | The fdbs physical address. The physical address is
represented in the canonical form according to the
corresponding stationType. If the entry is a
route-descriptor type, then the physical address is in
the form of ring-ring-bridge. |
| CAR fdbCard | 1.3.6.1.4.1.930.2.1.2.22.3.1.3 | CardId | read-only | The card number through which this station is reached. |
| POR fdbPort | 1.3.6.1.4.1.930.2.1.2.22.3.1.4 | PortId | read-only | The interface through which this station is reached. |
| INT fdbIfIndex | 1.3.6.1.4.1.930.2.1.2.22.3.1.5 | INTEGER | read-only | The interface through which this station is reached. The
value for this object identifies the instance of the ifIndex
object defined in MIB-II. If no such entry exists, the value
0 may be returned. |
| STA fdbStatus | 1.3.6.1.4.1.930.2.1.2.22.3.1.6 | StatusIndicator | read-write | This indicates the validity of the station. Stations
are added by supplying the required objects as index of
fdbStatus, and setting the status to valid. Static stations
may be deleted by setting this object to invalid. |
| BIT fdbLocal | 1.3.6.1.4.1.930.2.1.2.22.3.1.7 | BitField | read-write | If set, this object indicates the station is attached to a
ring that is directly attached to the token ring port.
This object does not apply to Ethernet stations. |
| BIT fdbStatic | 1.3.6.1.4.1.930.2.1.2.22.3.1.8 | BitField | read-only | Fdb is static if this bit is set. |
| BIT fdbDuplicate | 1.3.6.1.4.1.930.2.1.2.22.3.1.9 | BitField | read-only | Indicates that another fdb with the same address was
learned from a different card and port. |
| OCT fdbRIFPath | 1.3.6.1.4.1.930.2.1.2.22.3.1.10 | OCTET STRING | read-write | The RIF path to the station. The RIF Path is specified
as being sourced from the system, as read from left-to-right.
A RIF path is valid only for objects whose stationType
is token-ring. The value may be a zero length string. |
| fdbSSTable | 1.3.6.1.4.1.930.2.1.2.22.4 | | not-accessible | This table contains the list of user defined static
stations. All the objects in this table are read-only
and are intended to aid reading static station
configuration. |
| fdbSSEntry | 1.3.6.1.4.1.930.2.1.2.22.4.1 | | not-accessible | This is an entry in the fdbSSTable which is indexed by
fdbSSIndex. Adding to the static station list is done
via fdbTable. All objects here are read-only. |
| INT fdbSSIndex | 1.3.6.1.4.1.930.2.1.2.22.4.1.1 | INTEGER | read-only | This is the index to the static station table. |
| FDB fdbSSType | 1.3.6.1.4.1.930.2.1.2.22.4.1.2 | FdbTypeId | read-only | This represents the media type for this static station. |
| PHY fdbSSAddress | 1.3.6.1.4.1.930.2.1.2.22.4.1.3 | PhysAddress | read-only | This is the MAC address for this static station. |
| CAR fdbSSCard | 1.3.6.1.4.1.930.2.1.2.22.4.1.4 | CardId | read-only | This is the card where this station station is. |
| POR fdbSSPort | 1.3.6.1.4.1.930.2.1.2.22.4.1.5 | PortId | read-only | This is the port where this station station is. |
| VLA fdbSSVlanId | 1.3.6.1.4.1.930.2.1.2.22.4.1.6 | VlanId | read-only | This is a vlan id of a vlan to which this static station
belongs to. |
| cnfdbTable | 1.3.6.1.4.1.930.2.1.2.22.5 | | not-accessible | This table contains fdb information for each station
known to the system, one entry per station per vlan. Static
stations may be created by setting fdbStatus to be valid. The
index of fdbStatus will contains infomation on the
station type, stationAddress, stationCard, stationPort
and vlanId. Entries may be subsequently modified by
setting the appropriate object for the entry. Entries are
deleted by clearing stationInUse. Basically, this table
is identical with the fdbTable except with fdbVlanId
being introduced |
| cnfdbEntry | 1.3.6.1.4.1.930.2.1.2.22.5.1 | | not-accessible | An list of station information for each station per vlan known
to the system. Static stations may be configured by properly
specifying at least the cnfdbType, cnfdbAddress,
cnfdbCard, cnfdbPort and cnfdbVlanId. |
| FDB cnfdbType | 1.3.6.1.4.1.930.2.1.2.22.5.1.1 | FdbTypeId | read-only | The type of the station. Station address are represented
in the canonical form as specified by their type. |
| PHY cnfdbAddress | 1.3.6.1.4.1.930.2.1.2.22.5.1.2 | PhysAddress | read-only | The fdbs physical address. The physical address is
represented in the canonical form according to the
corresponding stationType. If the entry is a
route-descriptor type, then the physical address is in
the form of ring-ring-bridge. |
| CAR cnfdbCard | 1.3.6.1.4.1.930.2.1.2.22.5.1.3 | CardId | read-only | The card number through which this station is reached. |
| POR cnfdbPort | 1.3.6.1.4.1.930.2.1.2.22.5.1.4 | PortId | read-only | The interface through which this station is reached. |
| VLA cnfdbVlanId | 1.3.6.1.4.1.930.2.1.2.22.5.1.5 | VlanId | read-only | The vlan ID through which this station is reached. |
| INT cnfdbIfIndex | 1.3.6.1.4.1.930.2.1.2.22.5.1.6 | INTEGER | read-only | The interface through which this station is reached. The
value for this object identifies the instance of the ifIndex
object defined in MIB-II. If no such entry exists, the value
0 may be returned. |
| STA cnfdbStatus | 1.3.6.1.4.1.930.2.1.2.22.5.1.7 | StatusIndicator | read-write | This indicates the validity of the station. Stations
are added by supplying the required objects as index of
fdbStatus, and setting the status to valid. Static stations
may be deleted by setting this object to invalid. |
| BIT cnfdbLocal | 1.3.6.1.4.1.930.2.1.2.22.5.1.8 | BitField | read-write | If set, this object indicates the station is attached to a
ring that is directly attached to the token ring port.
This object does not apply to Ethernet stations. |
| BIT cnfdbStatic | 1.3.6.1.4.1.930.2.1.2.22.5.1.9 | BitField | read-only | Fdb is static if this bit is set. |
| BIT cnfdbDuplicate | 1.3.6.1.4.1.930.2.1.2.22.5.1.10 | BitField | read-only | Indicates that another fdb with the same address was
learned from a different card and port. |
| OCT cnfdbRIFPath | 1.3.6.1.4.1.930.2.1.2.22.5.1.11 | OCTET STRING | read-write | The RIF path to the station. The RIF Path is specified
as being sourced from the system, as read from left-to-right.
A RIF path is valid only for objects whose stationType
is token-ring. The value may be a zero length string. |
