| OID symbolic | OID numeric | Type | Access | Description |
|---|
| filterGroup | 1.3.6.1.4.1.930.2.1.2.11 | | | |
| filterGroupTable | 1.3.6.1.4.1.930.2.1.2.11.1 | | not-accessible | Filter Group Table. Entries are added into the group by
specifying values for all objects with the exception
of the filterGroupMonitorDests and filterGroupAdditionalDests
objects. Entries are deleted simply by specifying the
appropriate filterGroupStatus value. |
| filterGroupEntry | 1.3.6.1.4.1.930.2.1.2.11.1.1 | | not-accessible | An entry in the filter group table. Table entries are indexed
by the unique user-defined group name, and the filter entry
index as assigned by the system. |
| GEN filterGroupName | 1.3.6.1.4.1.930.2.1.2.11.1.1.1 | GeneralFilterName | read-write | A user-defined unique ASCII string identifying the filter
group. |
| INT filterGroupIndex | 1.3.6.1.4.1.930.2.1.2.11.1.1.2 | INTEGER | read-write | The index of the filter entry within the filter group. Any
filter group entry is uniquely identifable by the group nam
and index. |
| STA filterGroupStatus | 1.3.6.1.4.1.930.2.1.2.11.1.1.3 | StatusIndicator | read-write | The status of this filter group entry. Entries may be
deleted by setting this object to invalid(2). |
| INT filterGroupMatch | 1.3.6.1.4.1.930.2.1.2.11.1.1.4 | INTEGER | read-write | The match condition for the filter. Match conditions are in
the form of the usual logical operators. |
| INT filterGroupType | 1.3.6.1.4.1.930.2.1.2.11.1.1.5 | INTEGER | read-write | The type of filter. MAC filters are defined from the start
of the MAC frame. LLC filters are defined from the start
of the LLC header (after RIF). VLAN filters operate on
a packet's VLAN classification parameters. For a valid
VLAN filter, filterGroupOffset be set to 0, and
filterGroupValue must contain exactly four bytes of VLAN
filter data as shown below:
Octet 1
Defines the user priority match criteria for VLAN
filter. Valid values are 0x01 through 0xFF. Each bit
in the octet corresponds to one of the eight available
user priority level as defined by the 802.1Q draft
specification. The least significant bit represents
priority zero, and the most significant bit
represents priority seven.
Octet 2
Defines the Canonical Format Indicator (CFI) match
criteria for VLAN filter. Possible values are 0x00, 0x01
and 0xFF. The value 0xFF indicates the switch should
ignore CFI value when filtering.
Octet 3 and 4
Define 12-bit VLAN ID match criteria for VLAN filter.
Valid values are 0x001 through 0xFFF. |
| INT filterGroupOffset | 1.3.6.1.4.1.930.2.1.2.11.1.1.6 | INTEGER | read-write | The byte offset from the beginning of the header to the
value to filter. |
| OCT filterGroupValue | 1.3.6.1.4.1.930.2.1.2.11.1.1.7 | OCTET STRING | read-write | The filter value field. The value is specified as a
hexadecimal string up to 12 bytes. |
| INT filterGroupForward | 1.3.6.1.4.1.930.2.1.2.11.1.1.8 | INTEGER | read-write | The forwarding rule for the filter. Forward to normal
indicates that the frame should be forwarded as usual. |
| INT filterGroupNextIfMatch | 1.3.6.1.4.1.930.2.1.2.11.1.1.9 | INTEGER | read-write | The next filter entry as referenced by the filter index
to apply if the filter match succeeds. An entry of 0 indicates
that filtering ends for the packet. An entry whose value
is larger than the number of filters in the group indicates
that the next filter entry to apply is the next filter
group (if any) enabled on the port. |
| INT filterGroupNextIfFail | 1.3.6.1.4.1.930.2.1.2.11.1.1.10 | INTEGER | read-write | The next filter entry as referenced by the filter index
to apply if the filter match fails. An entry of 0 indicates
that filtering ends for the packet. An entry whose value
is larger than the number of filters in the group indicates
that the next filter entry to apply is the next filter
group (if any) enabled on the port. |
| OCT filterGroupAdditionalDests | 1.3.6.1.4.1.930.2.1.2.11.1.1.11 | OCTET STRING | read-write | This will be replaced by filterGroupAdditionalDestions.
A list of up to 256 pairs of additional cards and ports
to send packets matching this filter. Each unsigned int8
is formatted as follows:
the high-order 4 bits represent the card number, the low
order 4 bits are the port number. |
| OCT filterGroupMonitorDests | 1.3.6.1.4.1.930.2.1.2.11.1.1.12 | OCTET STRING | read-write | This will be replaced by filterGroupAlternateDestination.
A pair of the monitoring card and port to send packets
matching this filter. Each unsigned int8 is formatted
as follows:
the high-order 4 bits represent the card number, the low
order 4 bits are the port number. |
| OCT filterGroupAdditionalDestinations | 1.3.6.1.4.1.930.2.1.2.11.1.1.13 | OCTET STRING | read-write | For 24 ports support. This is to replace
filterGroupAdditionalDests. Setting either
filterGroupAdditionalDests or filterGroupAlternateDestination
is enough. And if both are set, the one set later will be
in effect. Make sure that even number of octets are given.
A list of up to 256 pairs of additional cards and ports
to send packets matching this filter. Each pair of octets
is formatted as follows:
the high-order octet represent the card number, the low
order octet is the port number. |
| OCT filterGroupAlternateDestination | 1.3.6.1.4.1.930.2.1.2.11.1.1.14 | OCTET STRING | read-write | For 24 ports support. This is to replace
filterGroupMonitorDests. Setting either filterGroupMonitorDests
filterGroupAlternateDestination is enough. And if both
are set, the one set later will be in effect.
Make sure that even number of octets are given.
A pair of the monitoring card and port to send packets
matching this filter. Each pair of octets is formatted
as follows:
the high-order byte represent the card number, the low
order byte is the port number. |
| filterPortTable | 1.3.6.1.4.1.930.2.1.2.11.2 | | not-accessible | Input Filter Port Table. |
| filterPortEntry | 1.3.6.1.4.1.930.2.1.2.11.2.1 | | not-accessible | An entry in the filter group table. Table entries are indexed
by the unique user-defined group name, and the filter entry
index as assigned by the system. |
| INT filterPortCardNumber | 1.3.6.1.4.1.930.2.1.2.11.2.1.1 | INTEGER | read-write | The card number to which the filters apply. |
| INT filterPortPortNumber | 1.3.6.1.4.1.930.2.1.2.11.2.1.2 | INTEGER | read-write | The port number to which the filters apply. |
| INT filterPortIndex | 1.3.6.1.4.1.930.2.1.2.11.2.1.3 | INTEGER | read-write | A unique value for each filter group within the port. |
| STA filterPortStatus | 1.3.6.1.4.1.930.2.1.2.11.2.1.4 | StatusIndicator | read-write | The status of this filter port entry. Entries may be
deleted by setting this object to invalid(2). |
| GEN filterPortGroupName | 1.3.6.1.4.1.930.2.1.2.11.2.1.5 | GeneralFilterName | read-write | The filter port group name. |
| netbiosFilterPortTable | 1.3.6.1.4.1.930.2.1.2.11.3 | | not-accessible | The NetBIOS name filter table indexed by card and port
numbers. |
| netbiosFilterPortEntry | 1.3.6.1.4.1.930.2.1.2.11.3.1 | | not-accessible | An entry in the NetBios filter port table. Table entries
are indexed by the card, port and PortIndex as assigned
by the system. |
| INT netbiosFilterPortCardNumber | 1.3.6.1.4.1.930.2.1.2.11.3.1.1 | INTEGER | read-write | The card number to which the filters apply. |
| INT netbiosFilterPortPortNumber | 1.3.6.1.4.1.930.2.1.2.11.3.1.2 | INTEGER | read-write | The port number to which the filters apply. |
| INT netbiosFilterPortIndex | 1.3.6.1.4.1.930.2.1.2.11.3.1.3 | INTEGER | read-write | A unique value for each filter group within the port. |
| STA netbiosFilterPortStatus | 1.3.6.1.4.1.930.2.1.2.11.3.1.4 | StatusIndicator | read-write | The status of this NetBIOS filter entry. Entries may be
deleted by setting this object to invalid(2). |
| NET netbiosFilterPortName | 1.3.6.1.4.1.930.2.1.2.11.3.1.5 | NetbiosFilterName | read-write | The NetBIOS name to match for filtering. The name will
be blank padded. |
| NET netbiosFilterPortAction | 1.3.6.1.4.1.930.2.1.2.11.3.1.6 | NetbiosFilterAction | read-write | The action to take upon matching the name filter. |
| netbiosFilterRingTable | 1.3.6.1.4.1.930.2.1.2.11.4 | | not-accessible | The NetBIOS name filter table indexed by ring number. |
| netbiosFilterRingEntry | 1.3.6.1.4.1.930.2.1.2.11.4.1 | | not-accessible | An entry in the NetBios filter port table. Table entries
are indexed by ring number and PortIndex as assigned
by the system. |
| INT netbiosFilterRingNumber | 1.3.6.1.4.1.930.2.1.2.11.4.1.1 | INTEGER | read-write | The ring number to which the filters apply. |
| INT netbiosFilterRingIndex | 1.3.6.1.4.1.930.2.1.2.11.4.1.2 | INTEGER | read-write | A unique value for each filter group within the port. |
| STA netbiosFilterRingStatus | 1.3.6.1.4.1.930.2.1.2.11.4.1.3 | StatusIndicator | read-write | The status of this NetBIOS filter entry. Entries may be
deleted by setting this object to invalid(2). |
| NET netbiosFilterRingName | 1.3.6.1.4.1.930.2.1.2.11.4.1.4 | NetbiosFilterName | read-write | The NetBIOS name to match for filtering. The name will be
blank padded. |
| NET netbiosFilterRingAction | 1.3.6.1.4.1.930.2.1.2.11.4.1.5 | NetbiosFilterAction | read-write | The action to take upon matching the name filter. |
| outputFilterPortTable | 1.3.6.1.4.1.930.2.1.2.11.5 | | not-accessible | Output Filter Port Table. |
| outputFilterPortEntry | 1.3.6.1.4.1.930.2.1.2.11.5.1 | | not-accessible | An entry in the filter group table. Table entries are
indexed by the unique user-defined group name, and the filter entry
index as assigned by the system. |
| INT outputFilterPortCardNumber | 1.3.6.1.4.1.930.2.1.2.11.5.1.1 | INTEGER | read-write | The card number to which the filters apply. |
| INT outputFilterPortPortNumber | 1.3.6.1.4.1.930.2.1.2.11.5.1.2 | INTEGER | read-write | The port number to which the filters apply. |
| INT outputFilterPortIndex | 1.3.6.1.4.1.930.2.1.2.11.5.1.3 | INTEGER | read-write | A unique value for each filter group within the port. |
| STA outputFilterPortStatus | 1.3.6.1.4.1.930.2.1.2.11.5.1.4 | StatusIndicator | read-write | The status of this filter port entry. Entries may be
deleted by setting this object to invalid(2). |
| GEN outputFilterPortGroupName | 1.3.6.1.4.1.930.2.1.2.11.5.1.5 | GeneralFilterName | read-write | The filter port group name. |
