CDM-570Traps

Description: Defines SNMP trap notifications for Comtech EF Data CDM-570 satellite modem alarms and status events.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

CDM-570Traps is a companion MIB to the Comtech EF Data CDM-570 satellite modem's core management MIB, dedicated solely to defining SNMP trap/notification objects for the modem rather than polled status data. It belongs to the same satellite-modem product family as CDM-570L, and its role is to signal alarm and status-change events, such as loss of demodulator lock, configuration changes, or hardware faults, as they occur rather than via periodic polling. Because it is a trap-definition module, monitoring here is fundamentally event-driven: an NMS monitoring hardware/software status via this MIB watches for asynchronous notifications rather than reading gauge/counter objects. It directly depends on the base CDM-570 modem MIB (and by extension CDM-570L) since its traps report on objects and states defined there. It is deployed alongside the primary CDM-570 modem MIB at satellite ground station sites needing real-time alarm notification for link and hardware faults, with the CDM-570Traps download available for administrators to load into their MIB browser alongside the base module.

No sample objects were provided, and this module's stated purpose is defining traps rather than polled data objects, so no runtime polling scenario is described; an NMS would instead configure trap-receiver forwarding for this MIB and treat incoming notifications (e.g., a loss-of-lock alarm) as the monitoring signal rather than performing SNMP GET polling against it.

CDM-570 telecom equipment trap definitions; defines SNMP notifications for the CDM-570 device.