CAREL-ug40cdz-MIB

All MIBs › CAREL-ug40cdz-MIB

Organization: CAREL SpA

Last Updated: 2006-04-11

Category: Hardware and Environment, Vendor: Carel

Description: Manages Carel UG40CDZ industrial controller for data center precision cooling including temperature, humidity, and alarm status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CAREL-ug40cdz-MIB?

CAREL-ug40cdz-MIB is a vendor MIB from Carel for its UG40 Close Control Uniflair unit, an industrial controller used in data center precision cooling (CRAC/CRAH) systems. It exposes environmental and control data for the cooling unit, such as temperature and humidity setpoints/readings and alarm conditions. Its central monitoring value is environmental/hardware status: temperature, humidity, and alarm state of the precision cooling unit, which directly affects data center thermal safety. As a self-contained device-control MIB, it has no evident dependency on external standard MIBs beyond typical SNMP trap conventions. It is typically deployed on Carel UG40 Uniflair close-control air conditioning units in data center or telecom equipment room environments. Engineers can download the CAREL-ug40cdz-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CAREL-ug40cdz-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Carel UG40 Close Control Uniflair precision cooling unit

Monitoring Examples

Since sample_objects is empty for this MIB, no concrete CAREL-ug40cdz-MIB object names are available to ground a specific polling example, though based on the module description an operator would generally be expected to poll temperature, humidity, and alarm status objects on the UG40 unit to confirm the precision cooling system is operating within safe thresholds.

What Can Be Monitored

cooling unit temperature
cooling unit humidity
alarm/fault status

Imported Objects

From RFC1213-MIB

DisplayString

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-MIB

sysContact	OBJECT-TYPE
sysLocation	OBJECT-TYPE
sysName	OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
I32 agentCode	1.3.6.1.4.1.9839.1.2	Integer32	read-only	Code of the Agent. 1=WebGate
agentParameters	1.3.6.1.4.1.9839.2.0.1
I32 agentRelease	1.3.6.1.4.1.9839.1.1	Integer32	read-only	Release of the Agent.
I32 alarm2ndLevel	1.3.6.1.4.1.9839.2.1.1.67	Integer32	read-only	Standby Unit Switchover Alarm
I32 alarmA	1.3.6.1.4.1.9839.2.1.1.68	Integer32	read-only	Type A Alarm
I32 alarmAccess	1.3.6.1.4.1.9839.2.1.1.20	Integer32	read-only	Tampering Alarm
I32 alarmAirFlow	1.3.6.1.4.1.9839.2.1.1.28	Integer32	read-only	Alarm: Loss of Air Flow
I32 alarmB	1.3.6.1.4.1.9839.2.1.1.69	Integer32	read-only	Type B Alarm
I32 alarmC	1.3.6.1.4.1.9839.2.1.1.70	Integer32	read-only	Type C Alarm
I32 alarmC1Hours	1.3.6.1.4.1.9839.2.1.1.53	Integer32	read-only	ServiceAlarm: Compressor 1 hour counter threshold
I32 alarmC2Hours	1.3.6.1.4.1.9839.2.1.1.54	Integer32	read-only	ServiceAlarm: Compressor 2 hour counter threshold
I32 alarmC3Hours	1.3.6.1.4.1.9839.2.1.1.55	Integer32	read-only	ServiceAlarm: Compressor 3 hour counter threshold
I32 alarmC4Hours	1.3.6.1.4.1.9839.2.1.1.56	Integer32	read-only	ServiceAlarm: Compressor 4 hour counter threshold
I32 alarmCWDHT	1.3.6.1.4.1.9839.2.1.1.42	Integer32	read-only	Alarm: CW Temperature too High for Dehumidification
I32 alarmCWF	1.3.6.1.4.1.9839.2.1.1.43	Integer32	read-only	Alarm: CW Valve Failure or Water Flow too Low
I32 alarmCWFF	1.3.6.1.4.1.9839.2.1.1.44	Integer32	read-only	Alarm: Loss of Water Flow
I32 alarmCWHT	1.3.6.1.4.1.9839.2.1.1.45	Integer32	read-only	Alarm: High Chilled Water Temperature
I32 alarmCWOTS	1.3.6.1.4.1.9839.2.1.1.52	Integer32	read-only	Alarm: Chilled Water Outlet T. Sensor Failed/Disconnected
I32 alarmCWS	1.3.6.1.4.1.9839.2.1.1.48	Integer32	read-only	Alarm: Chilled Water Temp. Sensor Failed/Disconnected
I32 alarmDI2	1.3.6.1.4.1.9839.2.1.1.62	Integer32	read-only	Alarm by Digital Input 2
I32 alarmDI4	1.3.6.1.4.1.9839.2.1.1.63	Integer32	read-only	Alarm by Digital Input 4
I32 alarmDI6	1.3.6.1.4.1.9839.2.1.1.64	Integer32	read-only	Alarm by Digital Input 6
I32 alarmDTS	1.3.6.1.4.1.9839.2.1.1.50	Integer32	read-only	Alarm: Delivery Air Temp. Sensor Failed/Disconnected
I32 alarmEXV1	1.3.6.1.4.1.9839.2.1.1.34	Integer32	read-only	Alarm: Circuit 1 Electronic Valve Failure
I32 alarmEXV2	1.3.6.1.4.1.9839.2.1.1.35	Integer32	read-only	Alarm: Circuit 2 Electronic Valve Failure
I32 alarmFilter	1.3.6.1.4.1.9839.2.1.1.26	Integer32	read-only	Alarm: Clogged Filter
I32 alarmFilterHours	1.3.6.1.4.1.9839.2.1.1.57	Integer32	read-only	ServiceAlarm: Air Filter hour counter threshold
I32 alarmFlood	1.3.6.1.4.1.9839.2.1.1.27	Integer32	read-only	Alarm: Water Leakage Detected
I32 alarmGeneral	1.3.6.1.4.1.9839.2.1.1.66	Integer32	read-only	General Alarm
I32 alarmHeat1Hours	1.3.6.1.4.1.9839.2.1.1.58	Integer32	read-only	ServiceAlarm: Heater 1 hour counter threshold
I32 alarmHeat2Hours	1.3.6.1.4.1.9839.2.1.1.59	Integer32	read-only	ServiceAlarm: Heater 1 hour counter threshold
I32 alarmHeater	1.3.6.1.4.1.9839.2.1.1.29	Integer32	read-only	Alarm: Heater Overheating
I32 alarmHP1	1.3.6.1.4.1.9839.2.1.1.30	Integer32	read-only	Alarm: Circuit 1 High Pressure
I32 alarmHP2	1.3.6.1.4.1.9839.2.1.1.31	Integer32	read-only	Alarm: Circuit 1 High Pressure
I32 alarmHUHC	1.3.6.1.4.1.9839.2.1.1.39	Integer32	read-only	Alarm: Humidifier High Current
I32 alarmHum	1.3.6.1.4.1.9839.2.1.1.65	Integer32	read-only	Humidifier General Alarm
I32 alarmHumHours	1.3.6.1.4.1.9839.2.1.1.60	Integer32	read-only	ServiceAlarm: Humidifier hour counter threshold
I32 alarmHUPL	1.3.6.1.4.1.9839.2.1.1.40	Integer32	read-only	Alarm: Humidifier Power Loss
I32 alarmHUWL	1.3.6.1.4.1.9839.2.1.1.41	Integer32	read-only	Alarm: Humidifier Water Loss
I32 alarmHWS	1.3.6.1.4.1.9839.2.1.1.47	Integer32	read-only	Alarm: Hot Water Temp. Sensor Failed/Disconnected
I32 alarmLAN	1.3.6.1.4.1.9839.2.1.1.38	Integer32	read-only	Interrupted LAN Alarm
I32 alarmLP1	1.3.6.1.4.1.9839.2.1.1.32	Integer32	read-only	Alarm: Circuit 1 Low Pressure
I32 alarmLP2	1.3.6.1.4.1.9839.2.1.1.33	Integer32	read-only	Alarm: Circuit 2 Low Pressure
I32 alarmOTS	1.3.6.1.4.1.9839.2.1.1.49	Integer32	read-only	Alarm: Outdoor Temperature Sensor Failed/Disconnected
I32 alarmPSE	1.3.6.1.4.1.9839.2.1.1.36	Integer32	read-only	Alarm: Wrong Phase Sequence
I32 alarmRHS	1.3.6.1.4.1.9839.2.1.1.51	Integer32	read-only	Alarm: Room Humidity Sensor Failed/Disconnected
I32 alarmRoomEAP	1.3.6.1.4.1.9839.2.1.1.25	Integer32	read-only	Room T+H Limits by External Sensors
I32 alarmRoomHH	1.3.6.1.4.1.9839.2.1.1.23	Integer32	read-only	Alarm: Room High Humidity
I32 alarmRoomHT	1.3.6.1.4.1.9839.2.1.1.21	Integer32	read-only	Alarm: Room High Temperature
I32 alarmRoomLH	1.3.6.1.4.1.9839.2.1.1.24	Integer32	read-only	Alarm: Room Low Humidity
I32 alarmRoomLT	1.3.6.1.4.1.9839.2.1.1.22	Integer32	read-only	Alarm: Room Low Temperature
I32 alarmRTS	1.3.6.1.4.1.9839.2.1.1.46	Integer32	read-only	Alarm: Room Temp. Sensor Failed/Disconnected
I32 alarmSmokeFire	1.3.6.1.4.1.9839.2.1.1.37	Integer32	read-only	Alarm: SMOKE-FIRE DETECTED
I32 alarmUnitHours	1.3.6.1.4.1.9839.2.1.1.61	Integer32	read-only	ServiceAlarm: Unit hour counter threshold
analogObjects	1.3.6.1.4.1.9839.2.1.2
I32 baudRate	1.3.6.1.4.1.9839.2.0.1.2	Integer32	read-write	Baudrate of the Carel network.
carel	1.3.6.1.4.1.9839
I32 compr1WorkH	1.3.6.1.4.1.9839.2.1.3.3	Integer32	read-only	Compressor 1 Run Hours
I32 compr2WorkH	1.3.6.1.4.1.9839.2.1.3.4	Integer32	read-only	Compressor 2 Run Hours
I32 compr3WorkH	1.3.6.1.4.1.9839.2.1.3.5	Integer32	read-only	Compressor 3 Run Hours
I32 compr4WorkH	1.3.6.1.4.1.9839.2.1.3.6	Integer32	read-only	Compressor 4 Run Hours
I32 compressore1	1.3.6.1.4.1.9839.2.1.1.2	Integer32	read-only	Compressor 1
I32 compressore2	1.3.6.1.4.1.9839.2.1.1.3	Integer32	read-only	Compressor 2
I32 compressore3	1.3.6.1.4.1.9839.2.1.1.4	Integer32	read-only	Compressor 3
I32 compressore4	1.3.6.1.4.1.9839.2.1.1.5	Integer32	read-only	Compressor 4
I32 cool2SetP	1.3.6.1.4.1.9839.2.1.2.22	Integer32	read-write	Cooling 2nd Set Point
I32 coolDiff	1.3.6.1.4.1.9839.2.1.2.21	Integer32	read-write	Cooling Prop.Band
I32 coolRamp	1.3.6.1.4.1.9839.2.1.2.16	Integer32	read-only	Cooling Valve Ramp
I32 coolSetP	1.3.6.1.4.1.9839.2.1.2.20	Integer32	read-write	Cooling Set Point
I32 cwDehumSetp	1.3.6.1.4.1.9839.2.1.2.30	Integer32	read-write	CW Setpoint to Start Dehumidification
I32 cwHtThrsh	1.3.6.1.4.1.9839.2.1.2.31	Integer32	read-write	CW High Temperature Alarm Threshold
I32 cwModeSetp	1.3.6.1.4.1.9839.2.1.2.32	Integer32	read-write	CW Setpoint to start CW Operating Mode (Only TC Units)
I32 cwoTemp	1.3.6.1.4.1.9839.2.1.2.7	Integer32	read-only	Chilled Water Outlet Temperature
I32 cwTemp	1.3.6.1.4.1.9839.2.1.2.4	Integer32	read-only	Chilled Water Temperature
I32 dehumidification	1.3.6.1.4.1.9839.2.1.1.10	Integer32	read-only	Dehumidification
I32 dehumPband	1.3.6.1.4.1.9839.2.1.3.12	Integer32	read-write	Dehumidification Prop.Band
I32 dehumSetp	1.3.6.1.4.1.9839.2.1.3.16	Integer32	read-write	Dehumidification Setpoint
I32 deliveryTemp	1.3.6.1.4.1.9839.2.1.2.3	Integer32	read-write	Delivery Air Temperature
I32 delTempLimit	1.3.6.1.4.1.9839.2.1.2.35	Integer32	read-write	Delivery Temperature Low Limit Setpoint
digitalObjects	1.3.6.1.4.1.9839.2.1.1
I32 dtAutChgMLT	1.3.6.1.4.1.9839.2.1.2.36	Integer32	read-write	Delta Temperature for Automatic Mean/Local Changeover
I32 emerg	1.3.6.1.4.1.9839.2.1.1.12	Integer32	read-only	Main Power Loss
I32 enablemeanT	1.3.6.1.4.1.9839.2.1.1.97	Integer32	read-write	Local/Mean Usage of Values
I32 evapPress1	1.3.6.1.4.1.9839.2.1.2.8	Integer32	read-write	Circuit 1 Evaporating Pressure
I32 evapPress2	1.3.6.1.4.1.9839.2.1.2.9	Integer32	read-write	Circuit 2 Evaporating Pressure
I32 evapTemp1	1.3.6.1.4.1.9839.2.1.2.12	Integer32	read-only	Circuit 1 Evap.Temperature
I32 evapTemp2	1.3.6.1.4.1.9839.2.1.2.13	Integer32	read-only	Circuit 2 Evap.Temperature
I32 exv1steps	1.3.6.1.4.1.9839.2.1.3.29	Integer32	read-only	Circuit 1 EXV Valve Position
I32 exv2steps	1.3.6.1.4.1.9839.2.1.3.30	Integer32	read-only	Circuit 2 EXV Valve Position
I32 fanSpeed	1.3.6.1.4.1.9839.2.1.2.18	Integer32	read-only	Evapor. Fan Speed
I32 filterWorkH	1.3.6.1.4.1.9839.2.1.3.1	Integer32	read-only	Air Filter Working Houres
I32 heat1WorkH	1.3.6.1.4.1.9839.2.1.3.7	Integer32	read-only	Heater 1 Run Hours
I32 heat2SetP	1.3.6.1.4.1.9839.2.1.2.24	Integer32	read-write	Heating 2nd Set point
I32 heat2WorkH	1.3.6.1.4.1.9839.2.1.3.8	Integer32	read-only	Heater 2 Run Hours
I32 heatDiff	1.3.6.1.4.1.9839.2.1.2.25	Integer32	read-write	Heating Prop.Band
I32 heating1	1.3.6.1.4.1.9839.2.1.1.6	Integer32	read-only	Heating 1
I32 heating2	1.3.6.1.4.1.9839.2.1.1.7	Integer32	read-only	Heating 2
I32 heatRamp	1.3.6.1.4.1.9839.2.1.2.17	Integer32	read-only	Heating Valve Ramp
I32 heatSetP	1.3.6.1.4.1.9839.2.1.2.23	Integer32	read-write	Heating Set point
I32 hhAlarmThrsh	1.3.6.1.4.1.9839.2.1.3.14	Integer32	read-write	High Humidity Alarm Threshold
I32 hotGasCoil	1.3.6.1.4.1.9839.2.1.1.9	Integer32	read-only	Hot Gas Coil
I32 humidification	1.3.6.1.4.1.9839.2.1.1.11	Integer32	read-only	Humidification
I32 humidPband	1.3.6.1.4.1.9839.2.1.3.13	Integer32	read-write	Humidification Prop.Band
I32 humidSetp	1.3.6.1.4.1.9839.2.1.3.18	Integer32	read-write	Humidification Setpoint
I32 humiWorkH	1.3.6.1.4.1.9839.2.1.3.9	Integer32	read-only	Humidifier Run Hours
I32 hwTemp	1.3.6.1.4.1.9839.2.1.2.5	Integer32	read-only	Hot Water Temperature
instruments	1.3.6.1.4.1.9839.2
integerObjects	1.3.6.1.4.1.9839.2.1.3
I32 lanUnit	1.3.6.1.4.1.9839.2.1.3.27	Integer32	read-write	Number of LAN Units
I32 lhAlarmThrsh	1.3.6.1.4.1.9839.2.1.3.15	Integer32	read-write	Low Humidity Alarm Threshold
I32 lowPdelay	1.3.6.1.4.1.9839.2.1.3.22	Integer32	read-write	Low Pressure Delay
I32 netSize	1.3.6.1.4.1.9839.2.0.1.1	Integer32	read-write	Network size. It corresponds to the number of units connected to the WebGate.
I32 outdoorTemp	1.3.6.1.4.1.9839.2.1.2.2	Integer32	read-only	Ambient Temperature
I32 pwOnDelay	1.3.6.1.4.1.9839.2.1.3.20	Integer32	read-write	Restart Delay
I32 radcoolSpDX	1.3.6.1.4.1.9839.2.1.2.34	Integer32	read-write	Radcooler Setpoint in DX Mode
I32 radcoolSpES	1.3.6.1.4.1.9839.2.1.2.33	Integer32	read-write	Radcooler Setpoint in Energy Saving Mode
I32 regExcTime	1.3.6.1.4.1.9839.2.1.3.24	Integer32	read-write	Anti-Hunting Constant
I32 regulDelay	1.3.6.1.4.1.9839.2.1.3.21	Integer32	read-write	Regulation Start Transitory
I32 resetAlarm	1.3.6.1.4.1.9839.2.1.1.76	Integer32	read-write	Alarm Reset
I32 resetHrACU	1.3.6.1.4.1.9839.2.1.1.92	Integer32	read-write	Unit Run Hours Reset
I32 resetHrC1	1.3.6.1.4.1.9839.2.1.1.78	Integer32	read-write	Compressor 1 Run Hours Reset
I32 resetHrC2	1.3.6.1.4.1.9839.2.1.1.79	Integer32	read-write	Compressor 2 Run Hours Reset
I32 resetHrC3	1.3.6.1.4.1.9839.2.1.1.80	Integer32	read-write	Compressor 3 Run Hours Reset
I32 resetHrC4	1.3.6.1.4.1.9839.2.1.1.81	Integer32	read-write	Compressor 4 Run Hours Reset
I32 resetHrH1	1.3.6.1.4.1.9839.2.1.1.86	Integer32	read-write	Heater 1 Run Hours Reset
I32 resetHrH2	1.3.6.1.4.1.9839.2.1.1.87	Integer32	read-write	Heater 2 Run Hours Reset
I32 resetHrHU	1.3.6.1.4.1.9839.2.1.1.90	Integer32	read-write	Humidifier Run Hours Reset
I32 resetHrsFilt	1.3.6.1.4.1.9839.2.1.1.77	Integer32	read-write	Filter Run Hours Reset
I32 resetStC1	1.3.6.1.4.1.9839.2.1.1.82	Integer32	read-write	Compressor 1 Starting Counter Reset
I32 resetStC2	1.3.6.1.4.1.9839.2.1.1.83	Integer32	read-write	Compressor 2 Starting Counter Reset
I32 resetStC3	1.3.6.1.4.1.9839.2.1.1.84	Integer32	read-write	Compressor 3 Starting Counter Reset
I32 resetStC4	1.3.6.1.4.1.9839.2.1.1.85	Integer32	read-write	Compressor 4 Starting Counter Reset
I32 resetStH1	1.3.6.1.4.1.9839.2.1.1.88	Integer32	read-write	Heater 1 Starting Counter Reset
I32 resetStH2	1.3.6.1.4.1.9839.2.1.1.89	Integer32	read-write	Heater 2 Starting Counter Reset
I32 resetStHU	1.3.6.1.4.1.9839.2.1.1.91	Integer32	read-write	Humidifier Starting Counter Reset
I32 roomRH	1.3.6.1.4.1.9839.2.1.2.6	Integer32	read-only	Room Relative Humidity
I32 roomTemp	1.3.6.1.4.1.9839.2.1.2.1	Integer32	read-only	Room Temperature
I32 selDXCW	1.3.6.1.4.1.9839.2.1.1.71	Integer32	read-write	DX/CW Switch on TC Units
I32 selSW	1.3.6.1.4.1.9839.2.1.1.72	Integer32	read-write	Summer/Winter Switchover
I32 sleepmode	1.3.6.1.4.1.9839.2.1.1.95	Integer32	read-write	Setback Mode (Sleep Mode)
I32 smCoolSetp	1.3.6.1.4.1.9839.2.1.2.28	Integer32	read-write	Setback Mode: Cooling Setpoint
I32 smCycleTime	1.3.6.1.4.1.9839.2.1.3.28	Integer32	read-write	Sleep Mode Testing Cycle Time
I32 smDehumSetp	1.3.6.1.4.1.9839.2.1.3.17	Integer32	read-write	Setback Mode: Dehumidification Setpoint
I32 smHeatSetp	1.3.6.1.4.1.9839.2.1.2.29	Integer32	read-write	Setback Mode: Heating Setpoint
I32 smHumidSetp	1.3.6.1.4.1.9839.2.1.3.19	Integer32	read-write	Setback Mode: Humidification Setpoint
I32 smtest	1.3.6.1.4.1.9839.2.1.1.96	Integer32	read-write	Sleep Mode Test
I32 ssh1	1.3.6.1.4.1.9839.2.1.2.14	Integer32	read-only	Circuit 1 Superheat
I32 ssh2	1.3.6.1.4.1.9839.2.1.2.15	Integer32	read-only	Circuit 2 Superheat
I32 stdbyTime	1.3.6.1.4.1.9839.2.1.3.25	Integer32	read-write	Stand-by Cycle Base Time
I32 suctTemp1	1.3.6.1.4.1.9839.2.1.2.10	Integer32	read-only	Circuit 1 Suction Temperature
I32 suctTemp2	1.3.6.1.4.1.9839.2.1.2.11	Integer32	read-only	Circuit 2 Suction Temperature
I32 systemOn	1.3.6.1.4.1.9839.2.1.1.1	Integer32	read-only	System On (Fan)
I32 systemOnOff	1.3.6.1.4.1.9839.2.1.1.75	Integer32	read-write	System On-Off
systm	1.3.6.1.4.1.9839.1
I32 thAlarmdelay	1.3.6.1.4.1.9839.2.1.3.23	Integer32	read-write	Temp./Humid.Limits Alarm Delay
I32 thrsHT	1.3.6.1.4.1.9839.2.1.2.26	Integer32	read-write	High Room Temperature Alarm Threshold
I32 thrsLT	1.3.6.1.4.1.9839.2.1.2.27	Integer32	read-write	Low Room Temperature Alarm Threshold
ug40cdzMIB	1.3.6.1.4.1.9839.2.1			This is the MIB module for the UG40 Close Control Uniflair device.
I32 unit1_Code	1.3.6.1.4.1.9839.2.0.3.1	Integer32	read-only	Code of the unit having serial address 1.
I32 unit1_ErrorChecksumCounter	1.3.6.1.4.1.9839.2.0.8.1	Integer32	read-only	Error checksum counter of the unit having serial address 1.
I32 unit1_MaxSoftwareRelease	1.3.6.1.4.1.9839.2.0.6.1	Integer32	read-only	Maximum software release of the unit having serial address 1.
I32 unit1_MinSoftwareRelease	1.3.6.1.4.1.9839.2.0.5.1	Integer32	read-only	Minimum software release of the unit having serial address 1.
I32 unit1_NoAnswerCounter	1.3.6.1.4.1.9839.2.0.7.1	Integer32	read-only	No answer counter of the unit having serial address 1.
I32 unit1_SoftwareRelease	1.3.6.1.4.1.9839.2.0.4.1	Integer32	read-only	Software release of the unit having serial address 1.
I32 unit1_TimeoutCounter	1.3.6.1.4.1.9839.2.0.9.1	Integer32	read-only	Timeout counter of the unit having serial address 1.
STR unit1_Type	1.3.6.1.4.1.9839.2.0.2.1	DisplayString	read-only	Type of the unit having serial address 1.
unitCodeGroup	1.3.6.1.4.1.9839.2.0.3
unitErrorChecksumCounterGroup	1.3.6.1.4.1.9839.2.0.8
unitMaxSoftwareReleaseGroup	1.3.6.1.4.1.9839.2.0.6
unitMinSoftwareReleaseGroup	1.3.6.1.4.1.9839.2.0.5
unitNoAnswerCounterGroup	1.3.6.1.4.1.9839.2.0.7
unitSoftwareReleaseGroup	1.3.6.1.4.1.9839.2.0.4
unitTimeoutCounterGroup	1.3.6.1.4.1.9839.2.0.9
unitTypeGroup	1.3.6.1.4.1.9839.2.0.2
I32 unitWorkH	1.3.6.1.4.1.9839.2.1.3.2	Integer32	read-only	Unit Working Houres
webGateInfo	1.3.6.1.4.1.9839.2.0

RFC description

Management MIB for CAREL UG40 Close Control Uniflair precision cooling device. Provides agent release, configuration, and network-attached device management.

Start monitoring Carel UG40 Close Control Uniflair precision cooling unit with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CAREL-ug40cdz-MIB

What Is CAREL-ug40cdz-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description