All MIBs › CAREL-ug40cdz-MIB › resetHrHU
resetHrHU
Module: CAREL-ug40cdz-MIB
OID (symbolic): CAREL-ug40cdz-MIB::resetHrHU
OID (numeric): 1.3.6.1.4.1.9839.2.1.1.90
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Humidifier Run Hours Reset
What is resetHrHU?
Resets the humidifier's accumulated run-hour counter when written, as a 0/1 command. It is read-write and clears humiWorkH, typically used after replacing the humidifier's consumable elements.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9839.2.1.1.90 snmpwalk -v2c -c public <target> CAREL-ug40cdz-MIB::resetHrHU
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9839.2.1.1.90.1 snmpget -v2c -c public <target> CAREL-ug40cdz-MIB::resetHrHU.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9839.2.1.1.90.1 i <value>
Start monitoring Carel UG40 Close Control Uniflair precision cooling unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAREL-ug40cdz-MIB::resetHrHU OID value, configure state conditions and alerts, and monitor any Carel UG40 Close Control Uniflair precision cooling unit from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9839 | carel | CAREL-RITTAL-LCP-3311-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9839.2 | instruments | CAREL-ug40cdz-MIB |
| 1.3.6.1.4.1.9839.2.1 | ug40cdzMIB | CAREL-ug40cdz-MIB |
| 1.3.6.1.4.1.9839.2.1.1 | digitalObjects | CAREL-ug40cdz-MIB |
| 1.3.6.1.4.1.9839.2.1.1.90 | resetHrHU | CAREL-ug40cdz-MIB |