All MIBs › CAHYPERV-AIM-MIB
Category: Device Management, Vendor: CA Technologies
Description: Manages CA Hyper-V AIM virtualization monitoring providing health and performance data for Microsoft Hyper-V virtual machine environments.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CAHYPERV-AIM-MIB?
CAHYPERV-AIM-MIB is a vendor-specific MIB from CA (Computer Associates/Broadcom) associated with its Application Insight/Infrastructure Management (AIM) probe for monitoring Microsoft Hyper-V virtualization environments. It is intended to expose health and performance data about the Hyper-V host and its virtual machines, bridging Hyper-V's native WMI-based metrics into the SNMP domain used by CA's broader monitoring platform. In monitoring terms it would be used to track software-level status of the virtualization stack -- such as VM running/stopped state, host resource utilization, and Hyper-V service health -- complementing standard host hardware sensors with virtualization-specific status. No module description or sample objects were available in the source, so no other MIB dependency can be confirmed, though it likely relies on CA's own AIM framework conventions rather than IETF standards. It would typically be deployed within a CA (now Broadcom) infrastructure management deployment monitoring Windows Server Hyper-V hosts. Network engineers evaluating or troubleshooting this functionality can download the CAHYPERV-AIM-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CAHYPERV-AIM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Microsoft Hyper-V virtualization host
Monitoring Examples
No sample objects were provided for this module, so a concrete monitoring scenario referencing real object names cannot be given honestly. In general use, an administrator would expect to poll VM state and Hyper-V host resource objects exposed by this probe, but the specific object/table names are not available from the source data.
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| DisplayString |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| empire | 1.3.6.1.4.1.546 | |||
| unix | 1.3.6.1.4.1.546.1 | |||
| sysmgmt | 1.3.6.1.4.1.546.1.1 | |||
| NTF hypervAimStatVMAddTrap | 1.3.6.1.4.1.546.1.1.0.16501 | Trap is sent when a new virtual machine is added. | ||
| NTF hypervAimStatVMRemoveTrap | 1.3.6.1.4.1.546.1.1.0.16502 | Trap is sent when a new virtual machine is removed. | ||
| NTF hypervAimStatVMEnabledTrap | 1.3.6.1.4.1.546.1.1.0.16504 | Trap is sent when the virtual machines enabled state (hypervAimStatVMEnabledStatus) has changed. | ||
| NTF hypervAimStatVMMigrateTrap | 1.3.6.1.4.1.546.1.1.0.16505 | Trap is sent when a virtual machine is migrated to a new HyperV host. | ||
| traps | 1.3.6.1.4.1.546.9 | |||
| hypervAimStatVMAddEvent | 1.3.6.1.4.1.546.9.1 | |||
| hypervAimStatVMRemoveEvent | 1.3.6.1.4.1.546.9.2 | |||
| hypervAimStatVMEnabledEvent | 1.3.6.1.4.1.546.9.3 | |||
| hypervAimStatVMMigrateEvent | 1.3.6.1.4.1.546.9.4 | |||
| applications | 1.3.6.1.4.1.546.16 | |||
| cahypervaim | 1.3.6.1.4.1.546.16.56 | |||
| hypervAimGroup | 1.3.6.1.4.1.546.16.56.1 | |||
| INT hypervAimInstanceCount | 1.3.6.1.4.1.546.16.56.1.1 | INTEGER | read-only | Number of HyperV instances in hypervAimInstanceTable. |
| hypervAimInstanceTable | 1.3.6.1.4.1.546.16.56.1.2 | not-accessible | A table containing the HyperV instances. | |
| hypervAimInstanceEntry | 1.3.6.1.4.1.546.16.56.1.2.1 | not-accessible | The HyperV instances table entry. | |
| STR hypervAimInstanceName | 1.3.6.1.4.1.546.16.56.1.2.1.1 | SnmpAdminString | read-write | Name of the HyperV Instance. Here it is the HyperV Server host name. |
| STR hypervAimInstanceUserName | 1.3.6.1.4.1.546.16.56.1.2.1.4 | SnmpAdminString | read-write | User name for connecting to the HyperV Server. |
| STR hypervAimInstancePassword | 1.3.6.1.4.1.546.16.56.1.2.1.5 | SnmpAdminString | read-write | Password for the user name provided to connect to the HyperV Server. |
| INT hypervAimInstanceRowStatus | 1.3.6.1.4.1.546.16.56.1.2.1.7 | INTEGER | read-write | The status of this monitor entry according to the Textual Conventions for SNMPv2 (see RFC 1443). active(1) - the row is available for usage notInService(2) - setting to this value disables usage of the row notReady(3) - an error occured during usage of the row createAndGo(4) - setting to this value creates the row with row status set to active(1) createAndWait(5) - setting to this value creates the row with row status set to notInService(2) destroy(6) - setting to this value deletes the row |
| INT hypervAimInstanceDataStatus | 1.3.6.1.4.1.546.16.56.1.2.1.8 | INTEGER | read-only | The status of data of the HyperV Instance (Server), i.e. status of Aim caches for the instance. ready(1) - data are ready in Aim cache, caches were populated notReady(2) - data are Not ready, caches were not populated yet hostUnreachable(3) - HyperV host unreachable, data are kept in Aim caches hostIsSlave(4) - HyperV host is a slave server, data are kept in Aim caches authenticationFailed(5) - authentication failed for HyperV host, data are kept in Aim caches unknownError(6) - unknow error, data are kept in Aim caches |
| INT hypervAimInstanceIndex | 1.3.6.1.4.1.546.16.56.1.2.1.9 | INTEGER | read-only | The unique index of the instance. |
| hypervAimStatGroup | 1.3.6.1.4.1.546.16.56.2 | |||
| hypervAimStatHostGroup | 1.3.6.1.4.1.546.16.56.2.1 | |||
| INT hypervAIMStatHostCount | 1.3.6.1.4.1.546.16.56.2.1.1 | INTEGER | read-only | The number of entries in hypervAimStatHostTable |
| hypervAimStatHostTable | 1.3.6.1.4.1.546.16.56.2.1.2 | not-accessible | ||
| hypervAimStatHostEntry | 1.3.6.1.4.1.546.16.56.2.1.2.1 | not-accessible | ||
| STR hypervAimStatHostElementName | 1.3.6.1.4.1.546.16.56.2.1.2.1.1 | SnmpAdminString | read-only | The CIM element name of the Hyper-V host. |
| STR hypervAimStatHostName | 1.3.6.1.4.1.546.16.56.2.1.2.1.2 | SnmpAdminString | read-only | The CIM name of the HyperV Host. |
| STR hypervAimStatHostSystemName | 1.3.6.1.4.1.546.16.56.2.1.2.1.3 | SnmpAdminString | read-only | The DNS name of the Hyper-V host. |
| STR hypervAimStatHostCaption | 1.3.6.1.4.1.546.16.56.2.1.2.1.4 | SnmpAdminString | read-only | The CIM caption of the HyperV host. |
| STR hypervAimStatHostDescription | 1.3.6.1.4.1.546.16.56.2.1.2.1.5 | SnmpAdminString | read-only | The CIM description of the HyperV host. |
| STR hypervAimStatHostClusterName | 1.3.6.1.4.1.546.16.56.2.1.2.1.6 | SnmpAdminString | read-only | The name of the cluster, if the host is clustered. |
| STR hypervAimStatNetworkAddressIPv4 | 1.3.6.1.4.1.546.16.56.2.1.2.1.7 | DisplayString | read-only | The IPv4 network address of the HyperV host. |
| STR hypervAimStatMACAddress | 1.3.6.1.4.1.546.16.56.2.1.2.1.8 | DisplayString | read-only | The MAC address of the HyperV host. |
| INT hypervAimStatTotalHostCPUUsage | 1.3.6.1.4.1.546.16.56.2.1.2.1.9 | INTEGER | read-only | Total CPU used by Host in %. |
| INT hypervAimStatTotalHostMEMUsage | 1.3.6.1.4.1.546.16.56.2.1.2.1.10 | INTEGER | read-only | Host memory usage in %. |
| INT hypervAimStatTotalHostMemory | 1.3.6.1.4.1.546.16.56.2.1.2.1.11 | INTEGER | read-only | Total memory (in megabytes) of the HyperV host. |
| INT hypervAimStatIsClusterNode | 1.3.6.1.4.1.546.16.56.2.1.2.1.12 | INTEGER | read-only | Flag indicating that this host is part of an HyperV cluster node. |
| STR hypervAimStatDefaultVHDPath | 1.3.6.1.4.1.546.16.56.2.1.2.1.13 | SnmpAdminString | read-only | The default virtual hard disk path of the HyperV host. |
| STR hypervAimStatDefaultExternalDataPath | 1.3.6.1.4.1.546.16.56.2.1.2.1.14 | SnmpAdminString | read-only | The default external data path of the HyperV host. |
| INT hyperVAimStatVMsOK | 1.3.6.1.4.1.546.16.56.2.1.2.1.15 | INTEGER | read-only | Number of virtual machines reported as OK by the hypervisor. |
| INT hypervAimStatVMsCritical | 1.3.6.1.4.1.546.16.56.2.1.2.1.16 | INTEGER | read-only | Number of virtual machines reported as critical by the hypervisor. |
| STR hypervAimStatNetworkAddressIPv6 | 1.3.6.1.4.1.546.16.56.2.1.2.1.17 | DisplayString | read-only | The IPv6 network address of the HyperV host. |
| INT hypervAimStatHostIndex | 1.3.6.1.4.1.546.16.56.2.1.2.1.18 | INTEGER | read-only | The unique index of the host. |
| INT hypervAimStatHostCPUCount | 1.3.6.1.4.1.546.16.56.2.1.2.1.19 | INTEGER | read-only | Number of CPUs of the host. |
| hypervAimStatVMGroup | 1.3.6.1.4.1.546.16.56.2.2 | |||
| INT hypervAimStatVMcount | 1.3.6.1.4.1.546.16.56.2.2.1 | INTEGER | read-only | The number of entries in the hypervAimStatVMtable. |
| hypervAimStatVMTable | 1.3.6.1.4.1.546.16.56.2.2.2 | not-accessible | A table containing information about all Monitored Nodes. | |
| hypervAimStatVMEntry | 1.3.6.1.4.1.546.16.56.2.2.2.1 | not-accessible | The table entry. | |
| STR hypervAimStatVMElementName | 1.3.6.1.4.1.546.16.56.2.2.2.1.1 | SnmpAdminString | read-only | A user-friendly name for the object.It is set to the display name of the computer for a virtual system. |
| STR hypervAimStatVMName | 1.3.6.1.4.1.546.16.56.2.2.2.1.2 | SnmpAdminString | read-only | Label (UID) by which the virtual machine is known. |
| STR hypervAimStatVMDescription | 1.3.6.1.4.1.546.16.56.2.2.2.1.3 | SnmpAdminString | read-only | Label by which the vm is known. |
| STR hypervAimStatVMHyperVHostName | 1.3.6.1.4.1.546.16.56.2.2.2.1.4 | SnmpAdminString | read-only | The name of the virtual machines physical host (hypervAimStatHostName). |
| INT hypervAimStatVMEnabledStatus | 1.3.6.1.4.1.546.16.56.2.2.2.1.5 | INTEGER | read-only | Indicates the enabled and disabled states of an element. It can also indicate the transitions between these requested states. Possible values are: unknown(1) enabled(2) disabled(3) paused(32768) suspended(32769) starting(32770) snapshotting(32771) migrating(32772) saving(32773) stopping(32774) deleted(32775) pausing(32776) resuming(32777) |
| INT hypervAimStatVMHealthStatus | 1.3.6.1.4.1.546.16.56.2.2.2.1.6 | INTEGER | read-only | Indicates the current health of the element. This attribute expresses the health of this element but not necessarily that of its subcomponents. Possible values: ok (5) major-failure (20) critical-failure (25) |
| STR hypervAimStatVMPrimaryOwnerName | 1.3.6.1.4.1.546.16.56.2.2.2.1.7 | SnmpAdminString | read-only | Name of the primary system owner. |
| STR hypervAimStatVMOnTime | 1.3.6.1.4.1.546.16.56.2.2.2.1.8 | SnmpAdminString | read-only | This property describes the total up time, in milliseconds, since the machine was last turned on, reset, or restored. This time excludes the time the virtual system was in the paused state.. |
| STR hypervAimStatVMTimeOfLastStateChange | 1.3.6.1.4.1.546.16.56.2.2.2.1.9 | SnmpAdminString | read-only | The date or time when the enabled state of the element last changed in ISO8601 format. |
| INT hypervAimStatVMHeartBeatStatus | 1.3.6.1.4.1.546.16.56.2.2.2.1.10 | INTEGER | read-only | Operational Status. |
| STR hypervAimStatVMExternalDataRoot | 1.3.6.1.4.1.546.16.56.2.2.2.1.11 | SnmpAdminString | read-only | The fully-qualified path to the root directory of an external data store. |
| STR hypervAimStatVMSnapshotDataRoot | 1.3.6.1.4.1.546.16.56.2.2.2.1.12 | SnmpAdminString | read-only | The fully-qualified path to the root directory of the external data store used to store snapshots for this virtual system. |
| INT hypervAimStatVMAutomaticRecoveryAction | 1.3.6.1.4.1.546.16.56.2.2.2.1.13 | INTEGER | read-only | Determines the action to take if the virtual machine worker process terminates abnormally. Possible Values: none(1) restart(2) reverttosnapshot(3) |
| INT hypervAimStatVMAutomaticShutdownAction | 1.3.6.1.4.1.546.16.56.2.2.2.1.14 | INTEGER | read-only | Determines the action to take when the host is shut down. Possible values: turnoff(1) savestate(2) shutdown(3) |
| INT hypervAimStatVMAutomaticStartupAction | 1.3.6.1.4.1.546.16.56.2.2.2.1.15 | INTEGER | read-only | Determines the action to take when the host is started. Possible values: none(1) restartifpreviouslyrunning(2) alwaysstartup(3) |
| STR hypervAimStatVMAutomaticStartupActionDelay | 1.3.6.1.4.1.546.16.56.2.2.2.1.16 | SnmpAdminString | read-only | The time interval to wait before performing the startup action. |
| INT hypervAimStatVMMemLimit | 1.3.6.1.4.1.546.16.56.2.2.2.1.17 | INTEGER | read-only | The maximum amount of memory of this virtual machine. |
| INT hypervAimStatVMMemReservation | 1.3.6.1.4.1.546.16.56.2.2.2.1.18 | INTEGER | read-only | The amount of memory guaranteed to be available for this virtual machine. |
| INT hypervAimStatVMMemVirtual | 1.3.6.1.4.1.546.16.56.2.2.2.1.19 | INTEGER | read-only | Total amount of memory in the virtual system, as seen by the guest OS. |
| INT hypervAimStatVMCPUCount | 1.3.6.1.4.1.546.16.56.2.2.2.1.20 | INTEGER | read-only | Total number of processors for this virtual machine. |
| INT hypervAimStatVMCPUUsage | 1.3.6.1.4.1.546.16.56.2.2.2.1.21 | INTEGER | read-only | VM CPU usage in %. |
| INT hypervAimStatVMMEMUsage | 1.3.6.1.4.1.546.16.56.2.2.2.1.22 | INTEGER | read-only | VM memory usage in %. |
| INT hypervAimStatVMIsClustered | 1.3.6.1.4.1.546.16.56.2.2.2.1.24 | INTEGER | read-only | Flag indicating that the VM is clustered and therefore mirgratable. |
| STR hypervAimStatVMOSName | 1.3.6.1.4.1.546.16.56.2.2.2.1.25 | SnmpAdminString | read-only | OS name of the VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMOSVersion | 1.3.6.1.4.1.546.16.56.2.2.2.1.26 | SnmpAdminString | read-only | OS version of the VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMDNSName | 1.3.6.1.4.1.546.16.56.2.2.2.1.27 | SnmpAdminString | read-only | DNS name of the VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMCSDVersion | 1.3.6.1.4.1.546.16.56.2.2.2.1.28 | SnmpAdminString | read-only | CSD Version name of the VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMOSMajor | 1.3.6.1.4.1.546.16.56.2.2.2.1.29 | SnmpAdminString | read-only | Major OS version of the VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMOSMinor | 1.3.6.1.4.1.546.16.56.2.2.2.1.30 | SnmpAdminString | read-only | Minor OS version of the VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMOSBuildNumber | 1.3.6.1.4.1.546.16.56.2.2.2.1.31 | SnmpAdminString | read-only | OS build number of the VM (if HyperV Integration Services is installed) |
| INT hypervAimStatVMOSOSPlatformId | 1.3.6.1.4.1.546.16.56.2.2.2.1.32 | INTEGER | read-only | OS platform ID of the VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMServicePackMajor | 1.3.6.1.4.1.546.16.56.2.2.2.1.33 | SnmpAdminString | read-only | Major service pack version of the VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMServicePackMinor | 1.3.6.1.4.1.546.16.56.2.2.2.1.34 | SnmpAdminString | read-only | Minor service pack version of the VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMSuiteMask | 1.3.6.1.4.1.546.16.56.2.2.2.1.35 | SnmpAdminString | read-only | OS Suite Mask of the VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMProductType | 1.3.6.1.4.1.546.16.56.2.2.2.1.36 | SnmpAdminString | read-only | Product type of the VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMOSEditionId | 1.3.6.1.4.1.546.16.56.2.2.2.1.37 | SnmpAdminString | read-only | OS edition ID ofthe VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMProcessorArchitecture | 1.3.6.1.4.1.546.16.56.2.2.2.1.38 | SnmpAdminString | read-only | Processor architecture of the VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMIntegrationServicesVersion | 1.3.6.1.4.1.546.16.56.2.2.2.1.39 | SnmpAdminString | read-only | Version of the Hyper-V Integration Services (if HyperV Integration Services is installed) |
| STR hypervAimStatVMNetworkAddressIPv4 | 1.3.6.1.4.1.546.16.56.2.2.2.1.40 | DisplayString | read-only | IPv4 network address of the VM (if HyperV Integration Services is installed). Multiple addresses are separated by |. |
| STR hypervAimStatVMNetworkAddressIPv6 | 1.3.6.1.4.1.546.16.56.2.2.2.1.41 | DisplayString | read-only | IPv6 network address of the VM (if HyperV Integration Services is installed). Multiple addresses are separated by |. |
| STR hypervAimStatVMRDPAddressIPv4 | 1.3.6.1.4.1.546.16.56.2.2.2.1.42 | DisplayString | read-only | RDP IPv4 address of the VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMRDPAddressIPv6 | 1.3.6.1.4.1.546.16.56.2.2.2.1.43 | DisplayString | read-only | RDP IPv6 address of the VM (if HyperV Integration Services is installed) |
| STR hypervAimStatVMMACAddress | 1.3.6.1.4.1.546.16.56.2.2.2.1.44 | DisplayString | read-only | MAC address of the VM. Multiple addresses are separated by |. |
| INT hypervAimStatVMPreviousEnabledStatus | 1.3.6.1.4.1.546.16.56.2.2.2.1.45 | INTEGER | not-accessible | Indicates the previous enabled statee of an element. Not-accessible object used for hypervAimStatVMEnabledTrap. |
| STR hypervAimStatVMHyperVPreviousHostName | 1.3.6.1.4.1.546.16.56.2.2.2.1.46 | SnmpAdminString | not-accessible | Indicates the previous HyperV host name of an virtual machine. Not-accessible object used for hypervAimStatVMMigrateTrap. |
| INT hypervAimStatVMIndex | 1.3.6.1.4.1.546.16.56.2.2.2.1.47 | INTEGER | read-only | The unique index of the virtual machine. |
| INT hypervAimStatVMHyperVHostIndex | 1.3.6.1.4.1.546.16.56.2.2.2.1.48 | INTEGER | read-only | The index of the virtual machines physical host (hypervAimStatHostIndex) |
| INT hypervAimStatVMHyperVPreviousHostIndex | 1.3.6.1.4.1.546.16.56.2.2.2.1.49 | INTEGER | not-accessible | Indicates the previous HyperV host index of an virtual machine. Not-accessible object used for hypervAimStatVMMigrateTrap. |
| STR hypervAimStatVMOtherIdentifyingInfo | 1.3.6.1.4.1.546.16.56.2.2.2.1.50 | SnmpAdminString | read-only | Other Identifying Info, used internally to uniquely identify the virtual machine. |
| hypervAimStatClusterGroup | 1.3.6.1.4.1.546.16.56.2.4 | |||
| INT hypervAimStatClusterCount | 1.3.6.1.4.1.546.16.56.2.4.1 | INTEGER | read-only | |
| INT hypervAimStatClusterHostCount | 1.3.6.1.4.1.546.16.56.2.4.2 | INTEGER | read-only | The number of HyperV cluster hosts. |
| INT hypervAimStatClusteredVMsCount | 1.3.6.1.4.1.546.16.56.2.4.3 | INTEGER | read-only | |
| hypervAimStatClusterTable | 1.3.6.1.4.1.546.16.56.2.4.4 | not-accessible | ||
| hypervAimStatClusterEntry | 1.3.6.1.4.1.546.16.56.2.4.4.1 | not-accessible | ||
| STR hypervAimStatClusterName | 1.3.6.1.4.1.546.16.56.2.4.4.1.1 | SnmpAdminString | read-only | The unique name of the cluster. |
| INT hypervAimStatClusterIndex | 1.3.6.1.4.1.546.16.56.2.4.4.1.2 | INTEGER | read-only | The unique index of the cluster. |
| hypervAimStatClusterHostsTable | 1.3.6.1.4.1.546.16.56.2.4.5 | not-accessible | ||
| hypervAimStatClusterHostsEntry | 1.3.6.1.4.1.546.16.56.2.4.5.1 | not-accessible | A table holding als hosts in a HyperV cluster. | |
| STR hypervAimStatClusterHostName | 1.3.6.1.4.1.546.16.56.2.4.5.1.1 | SnmpAdminString | read-only | |
| STR hypervAimStatClusterHostNodeID | 1.3.6.1.4.1.546.16.56.2.4.5.1.2 | DisplayString | read-only | ID of the cluster node. |
| INT hypervAimStatClusterHostStatus | 1.3.6.1.4.1.546.16.56.2.4.5.1.3 | INTEGER | read-only | The status of the HyperV cluster host: Unknown(1), NodeUp(2), NodeDown(3), NodePaused(4) or NodeJoining(5) |
| STR hypervAimStatClusterHostClusterName | 1.3.6.1.4.1.546.16.56.2.4.5.1.4 | SnmpAdminString | read-only | The name of the cluster (hypervAimStatClusterName) the clustered host belongs to. |
| INT hypervAimStatClusterHostIndex | 1.3.6.1.4.1.546.16.56.2.4.5.1.5 | INTEGER | read-only | The unique index of this cluster host. |
| INT hypervAimStatClusterHostClusterIndex | 1.3.6.1.4.1.546.16.56.2.4.5.1.6 | INTEGER | read-only | The index of the cluster (hypervAimStatClusterIndex) the clustered host belongs to. |
| hypervAimStatClusteredVMTable | 1.3.6.1.4.1.546.16.56.2.4.6 | not-accessible | ||
| hypervAimStatClusteredVMEntry | 1.3.6.1.4.1.546.16.56.2.4.6.1 | not-accessible | The virtual machines managed by a HyperV cluster. | |
| STR hypervAimStatClusteredVMName | 1.3.6.1.4.1.546.16.56.2.4.6.1.1 | SnmpAdminString | read-only | The name (UUID) of the clustered virtual machine. |
| STR hypervAimStatClusteredVMElementName | 1.3.6.1.4.1.546.16.56.2.4.6.1.2 | SnmpAdminString | read-only | The readable name of the clustered virtual machine. |
| STR hypervAimStatClusteredVMHost | 1.3.6.1.4.1.546.16.56.2.4.6.1.3 | SnmpAdminString | read-only | The Hyper-V host name of the clustered virtual machine. |
| STR hypervAimStatClusteredVMClusterName | 1.3.6.1.4.1.546.16.56.2.4.6.1.4 | SnmpAdminString | read-only | The name of the cluster (hypervAimStatClusterName) of the clustered virtual machine. |
| INT hypervAimStatClusteredVMIndex | 1.3.6.1.4.1.546.16.56.2.4.6.1.5 | INTEGER | read-only | The unique index of the clustered virtual machine. |
| INT hypervAimStatClusteredVMHostIndex | 1.3.6.1.4.1.546.16.56.2.4.6.1.6 | INTEGER | read-only | The host index of the clustered virtual machine. |
| INT hypervAimStatClusteredVMClusterIndex | 1.3.6.1.4.1.546.16.56.2.4.6.1.7 | INTEGER | read-only | The name of the cluster (hypervAimStatClusterName) of the clustered virtual machine. |
| hypervAimStatTemplateGroup | 1.3.6.1.4.1.546.16.56.2.5 | |||
| INT hypervAIMStatTemplateCount | 1.3.6.1.4.1.546.16.56.2.5.1 | INTEGER | read-only | The number of entries in hypervAimStatTemplateTable |
| hypervAimStatTemplateTable | 1.3.6.1.4.1.546.16.56.2.5.2 | not-accessible | ||
| hypervAimStatTemplateEntry | 1.3.6.1.4.1.546.16.56.2.5.2.1 | not-accessible | ||
| STR hypervAimStatTemplateElementName | 1.3.6.1.4.1.546.16.56.2.5.2.1.1 | SnmpAdminString | read-only | A user-friendly name of the template. |
| STR hypervAimStatTemplateName | 1.3.6.1.4.1.546.16.56.2.5.2.1.2 | SnmpAdminString | read-only | The label (UID) of the template. |
| STR hypervAimStatTemplateHyperVHostName | 1.3.6.1.4.1.546.16.56.2.5.2.1.3 | SnmpAdminString | read-only | The name of the templates host (hypervAimStatHostName). |
| INT hypervAimStatTemplateNumberOfProcessors | 1.3.6.1.4.1.546.16.56.2.5.2.1.4 | INTEGER | read-only | The number of processors for this template |
| INT hypervAimStatTemplateNumberOfNICs | 1.3.6.1.4.1.546.16.56.2.5.2.1.5 | INTEGER | read-only | Number of NICs for the template. |
| INT hypervAimStatTemplateVirtualQuantity | 1.3.6.1.4.1.546.16.56.2.5.2.1.6 | INTEGER | read-only | The memory for this template. |
| STR hypervAimStatTemplateCreationDate | 1.3.6.1.4.1.546.16.56.2.5.2.1.7 | SnmpAdminString | read-only | The creation date of the template in ISO8601 format. |
| STR hypervAimStatTemplateDescription | 1.3.6.1.4.1.546.16.56.2.5.2.1.8 | SnmpAdminString | read-only | The description of the template. |
| STR hypervAimStatTemplateFileSystemPath | 1.3.6.1.4.1.546.16.56.2.5.2.1.9 | SnmpAdminString | read-only | The path to the template file. |
| INT hypervAimStatTemplateDiskSpaceRequired | 1.3.6.1.4.1.546.16.56.2.5.2.1.10 | INTEGER | read-only | The required disk space for the template. |
| STR hypervAimStatTemplateOSName | 1.3.6.1.4.1.546.16.56.2.5.2.1.11 | SnmpAdminString | read-only | OS name of the VM template. |
| STR hypervAimStatTemplateOSVersion | 1.3.6.1.4.1.546.16.56.2.5.2.1.12 | SnmpAdminString | read-only | OS version of the VM template. |
| INT hypervAimStatTemplateIndex | 1.3.6.1.4.1.546.16.56.2.5.2.1.13 | INTEGER | read-only | A unique index of the template. |
| INT hypervAimStatTemplateHyperVHostIndex | 1.3.6.1.4.1.546.16.56.2.5.2.1.14 | INTEGER | read-only | The index of the templates host (hypervAimStatHostIndex). |
| hypervAimConfigGroup | 1.3.6.1.4.1.546.16.56.3 | |||
| hypervAimCfgGeneralGroup | 1.3.6.1.4.1.546.16.56.3.1 | |||
| STR hypervAimCfgname | 1.3.6.1.4.1.546.16.56.3.1.1 | SnmpAdminString | read-only | The agent's name. |
| STR hypervAimCfgversion | 1.3.6.1.4.1.546.16.56.3.1.2 | SnmpAdminString | read-only | Version of the agent. |
| STR hypervAimCfgstarttime | 1.3.6.1.4.1.546.16.56.3.1.3 | SnmpAdminString | read-only | Time the agent was started. |
| STR hypervAimCfglastupdatetime | 1.3.6.1.4.1.546.16.56.3.1.4 | SnmpAdminString | read-only | Time the MIB was last updated. |
| INT hypervAimCfgagentpollinterval | 1.3.6.1.4.1.546.16.56.3.1.5 | INTEGER | read-write | Poll Interval for the agent. |
| STR hypervAimCfgeventlastupdatetime | 1.3.6.1.4.1.546.16.56.3.1.6 | SnmpAdminString | read-only | The Event Last Update Time. |
| INT hypervAimCfgDataStatus | 1.3.6.1.4.1.546.16.56.3.1.7 | INTEGER | read-only | The status of Hyper-V data, i.e. status of Aim caches. dataReady(1) - data are ready in Aim caches, caches were populated dataNotReady(2) - data are Not ready yet, Aim is retrieving data from platform, caches were not populated yet dataError(3) - failed to retrieve data from platform, Aim caches were not populated |
RFC description
Provides monitoring and management capabilities for Microsoft Hyper-V virtual machines.
Start monitoring Microsoft Hyper-V host monitored by CA Unicenter AIM with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.