All MIBs › DCS3RMT-MIB
Category: Device Management, Hardware and Environment
Description: Manages remote management access and control for DCS3 chassis platforms.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DCS3RMT-MIB?
DCS3RMT-MIB is a Dell enterprise MIB for remote management access on DCS3-class server chassis/baseboard hardware, indicated by its server3/baseboard naming and Dell OID root, similar in spirit to Dell's DRAC-style remote access controllers. It exposes a remoteAccessTable that tracks, per chassis and adapter, the type of remote access interface present, its capabilities, current settings, and operational status. Key monitoring value comes from remoteAccessStatus (whether the remote access controller/adapter is functioning), along with remoteAccessProductInfoName and remoteAccessVersionInfoName, which let administrators verify firmware/hardware identity and version of the management controller itself. It is a self-contained Dell enterprise-specific MIB, typically used alongside other Dell server MIBs (chassis health, baseboard sensors) for full server hardware monitoring. This MIB is deployed in data center environments managing Dell server hardware, where IT staff need to confirm out-of-band remote management interfaces are present, correctly configured, and healthy. Engineers can download the DCS3RMT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in DCS3RMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Dell PowerEdge / DCS3-class server chassis
- Dell server baseboard management controllers
Monitoring Examples
An admin polling remoteAccessTable would index by remoteAccessChassisIndex and remoteAccessAdapterIndex to enumerate each remote-access adapter in a chassis, checking remoteAccessType and remoteAccessStatus to confirm the controller is operational. If remoteAccessStatus reports a fault or the adapter drops from the table, it suggests the remote management interface has failed or been removed, which would cut off out-of-band access to that server. remoteAccessVersionInfoName would be checked to confirm the management firmware version matches the fleet baseline.
What Can Be Monitored
- remote access adapter status
- remote access type/capabilities
- remote management firmware version
- remote access product identity
- control capability settings
This MIB depends on
Related MIBs
Imported Objects
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dell | 1.3.6.1.4.1.674 | |||
| server3 | 1.3.6.1.4.1.674.10892 | |||
| baseboardGroup | 1.3.6.1.4.1.674.10892.1 | |||
| remoteAccessGroup | 1.3.6.1.4.1.674.10892.1.1700 | |||
| remoteAccessTable | 1.3.6.1.4.1.674.10892.1.1700.10 | not-accessible | 1700.0010 This object defines the Remote Access table. | |
| remoteAccessTableEntry | 1.3.6.1.4.1.674.10892.1.1700.10.1 | not-accessible | 1700.0010.0001 This object defines the Remote Access table entry. | |
| DEL remoteAccessChassisIndex | 1.3.6.1.4.1.674.10892.1.1700.10.1.1 | DellObjectRange | read-only | 1700.0010.0001.0001 This attribute defines the index (one based) of the chassis containing the Remote Access hardware. |
| DEL remoteAccessAdapterIndex | 1.3.6.1.4.1.674.10892.1.1700.10.1.2 | DellObjectRange | read-only | 1700.0010.0001.0002 This attribute defines the index (one based) of the Remote Access hardware. |
| DEL remoteAccessType | 1.3.6.1.4.1.674.10892.1.1700.10.1.3 | DellRemoteAccessType | read-only | 1700.0010.0001.0003 This attribute defines the type of the Remote Access hardware. |
| DEL remoteAccessStateCapabilities | 1.3.6.1.4.1.674.10892.1.1700.10.1.4 | DellStateCapabilities | read-only | 1700.0010.0001.0004 This attribute defines the state capabilities of the Remote Access hardware. |
| DEL remoteAccessStateSettings | 1.3.6.1.4.1.674.10892.1.1700.10.1.5 | DellStateSettings | read-write | 1700.0010.0001.0005 This attribute defines the state setting of the Remote Access hardware. |
| DEL remoteAccessStatus | 1.3.6.1.4.1.674.10892.1.1700.10.1.6 | DellStatus | read-only | 1700.0010.0001.0006 This attribute defines the status of the Remote Access hardware. |
| STR remoteAccessProductInfoName | 1.3.6.1.4.1.674.10892.1.1700.10.1.7 | DisplayString | read-only | 1700.0010.0001.0007 This attribute defines the name of the product providing the Remote Access functionality. |
| STR remoteAccessDescriptionInfoName | 1.3.6.1.4.1.674.10892.1.1700.10.1.8 | DisplayString | read-only | 1700.0010.0001.0008 This attribute defines the description of the product providing the Remote Access functionality. |
| STR remoteAccessVersionInfoName | 1.3.6.1.4.1.674.10892.1.1700.10.1.9 | DisplayString | read-only | 1700.0010.0001.0009 This attribute defines the version of the product providing the Remote Access functionality. |
| DEL remoteAccessControlCapabilities | 1.3.6.1.4.1.674.10892.1.1700.10.1.10 | DellRemoteAccessControlCapabilities | read-only | 1700.0010.0001.0010 This attribute defines the control capabilities of the Remote Access hardware. |
| DEL remoteAccessControlSettings | 1.3.6.1.4.1.674.10892.1.1700.10.1.11 | DellRemoteAccessControlSettings | read-write | 1700.0010.0001.0011 This attribute defines the control settings of the Remote Access hardware. |
| DEL remoteAccessMonitorCapabilities | 1.3.6.1.4.1.674.10892.1.1700.10.1.12 | DellRemoteAccessMonitorCapabilities | read-only | 1700.0010.0001.0012 This attribute defines the monitor capabilities of the Remote Access hardware. |
| DEL remoteAccessMonitorSettings | 1.3.6.1.4.1.674.10892.1.1700.10.1.13 | DellRemoteAccessMonitorSettings | read-write | 1700.0010.0001.0013 This attribute defines the monitor settings of the Remote Access hardware. |
| DEL remoteAccessLANCapabilities | 1.3.6.1.4.1.674.10892.1.1700.10.1.14 | DellRemoteAccessLANCapabilities | read-only | 1700.0010.0001.0014 This attribute defines the LAN capabilities of the Remote Access hardware. |
| DEL remoteAccessLANSettings | 1.3.6.1.4.1.674.10892.1.1700.10.1.15 | DellRemoteAccessLANSettings | read-write | 1700.0010.0001.0015 This attribute defines the LAN settings of the Remote Access hardware. |
| DEL remoteAccessHostCapabilities | 1.3.6.1.4.1.674.10892.1.1700.10.1.16 | DellRemoteAccessHostCapabilities | read-only | 1700.0010.0001.0016 This attribute defines the host capabilities of the Remote Access hardware. |
| DEL remoteAccessHostSettings | 1.3.6.1.4.1.674.10892.1.1700.10.1.17 | DellRemoteAccessHostSettings | read-write | 1700.0010.0001.0017 This attribute defines the host settings of the Remote Access hardware. |
| DEL remoteAccessOutOfBandSNMPCapabilities | 1.3.6.1.4.1.674.10892.1.1700.10.1.18 | DellRemoteAccessOutOfBandSNMPCapabilities | read-only | 1700.0010.0001.0018 This attribute defines the out-of-band SNMP capabilities of the Remote Access hardware. |
| DEL remoteAccessOutOfBandSNMPSettings | 1.3.6.1.4.1.674.10892.1.1700.10.1.19 | DellRemoteAccessOutOfBandSNMPSettings | read-write | 1700.0010.0001.0019 This attribute defines the out-of-band SNMP settings of the Remote Access hardware. |
| IP remoteAccessSMTPServerIPAddress | 1.3.6.1.4.1.674.10892.1.1700.10.1.20 | IpAddress | read-write | 1700.0010.0001.0020 This attribute defines the IP address of the SMTP server provided by the Remote Access hardware. |
| IP remoteAccessFloppyTFTPIPAddress | 1.3.6.1.4.1.674.10892.1.1700.10.1.21 | IpAddress | read-write | 1700.0010.0001.0021 This attribute defines the IP address of the TFTP server providing the operating system image used by the Remote Access hardware. |
| STR remoteAccessFloppyTFTPPathName | 1.3.6.1.4.1.674.10892.1.1700.10.1.22 | DisplayString | read-write | 1700.0010.0001.0022 This attribute defines the file name of the the operating system image obtained from the TFTP server used by the Remote Access hardware. |
| IP remoteAccessFirmwareUpdateIPAddress | 1.3.6.1.4.1.674.10892.1.1700.10.1.23 | IpAddress | read-write | 1700.0010.0001.0023 This attribute defines the IP address of the update server providing the firmware image used by the Remote Access hardware. |
| STR remoteAccessFirmwareUpdatePathName | 1.3.6.1.4.1.674.10892.1.1700.10.1.24 | DisplayString | read-write | 1700.0010.0001.0024 This attribute defines the file name of the the firmware image obtained from the update server used by the Remote Access hardware. |
| IP remoteAccessNICStaticIPAddress | 1.3.6.1.4.1.674.10892.1.1700.10.1.25 | IpAddress | read-write | 1700.0010.0001.0025 This attribute defines the static IP address to be used by the onboard NIC provided by the Remote Access hardware. |
| IP remoteAccessNICStaticNetmaskAddress | 1.3.6.1.4.1.674.10892.1.1700.10.1.26 | IpAddress | read-write | 1700.0010.0001.0026 This attribute defines the netmask for the static IP address to be used by the onboard NIC provided by the Remote Access hardware. |
| IP remoteAccessNICStaticGatewayAddress | 1.3.6.1.4.1.674.10892.1.1700.10.1.27 | IpAddress | read-write | 1700.0010.0001.0027 This attribute defines the IP address for the gateway associated with the static IP address to be used by the onboard NIC provided by the Remote Access hardware. |
| STR remoteAccessPCMCIAInfoName | 1.3.6.1.4.1.674.10892.1.1700.10.1.28 | DisplayString | read-only | 1700.0010.0001.0028 This attribute defines the information for the PCMCIA device used by the Remote Access hardware. |
| STR remoteAccessMiscInfoName | 1.3.6.1.4.1.674.10892.1.1700.10.1.29 | DisplayString | read-write | 1700.0010.0001.0029 This attribute defines miscellaneous information for the Remote Access hardware. |
| IP remoteAccessNICCurrentIPAddress | 1.3.6.1.4.1.674.10892.1.1700.10.1.30 | IpAddress | read-only | 1700.0010.0001.0030 This attribute defines the IP address currently being used by the onboard NIC provided by the Remote Access hardware. |
| IP remoteAccessNICCurrentNetmaskAddress | 1.3.6.1.4.1.674.10892.1.1700.10.1.31 | IpAddress | read-only | 1700.0010.0001.0031 This attribute defines the netmask currently being used by the onboard NIC provided by the Remote Access hardware. |
| IP remoteAccessNICCurrentGatewayAddress | 1.3.6.1.4.1.674.10892.1.1700.10.1.32 | IpAddress | read-only | 1700.0010.0001.0032 This attribute defines the IP address for the gateway currently being used by the onboard NIC provided by the Remote Access hardware. |
| DEL remoteAccessNICCurrentInfoFromDHCP | 1.3.6.1.4.1.674.10892.1.1700.10.1.33 | DellBoolean | read-only | 1700.0010.0001.0033 This attribute defines if DHCP was used to obtain the NIC information currently being used by the onboard NIC provided by the Remote Access hardware. |
| STR remoteAccessRemoteConnectURL | 1.3.6.1.4.1.674.10892.1.1700.10.1.34 | DisplayString | read-only | 1700.0010.0001.0034 This attribute defines the URL for launching the Remote Access Remote Connect Interface. |
| remoteUserAdminTable | 1.3.6.1.4.1.674.10892.1.1700.20 | not-accessible | 1700.0020 This object defines the Remote Access User Administration table. | |
| remoteUserAdminTableEntry | 1.3.6.1.4.1.674.10892.1.1700.20.1 | not-accessible | 1700.0020.0001 This object defines the Remote Access User Administration table entry. | |
| DEL remoteUserAdminChassisIndex | 1.3.6.1.4.1.674.10892.1.1700.20.1.1 | DellObjectRange | read-only | 1700.0020.0001.0001 This attribute defines the index (one based) of the chassis containing the Remote Access hardware. |
| DEL remoteUserAdminAdapterIndex | 1.3.6.1.4.1.674.10892.1.1700.20.1.2 | DellObjectRange | read-only | 1700.0020.0001.0002 This attribute defines the index (one based) of the Remote Access hardware used by this Remote Access user. |
| DEL remoteUserAdminUserIndex | 1.3.6.1.4.1.674.10892.1.1700.20.1.3 | DellObjectRange | read-only | 1700.0020.0001.0003 This attribute defines the index (one based) of this Remote Access user. |
| DEL remoteUserAdminStateCapabilities | 1.3.6.1.4.1.674.10892.1.1700.20.1.4 | DellRemoteUserAdminStateCapabilities | read-only | 1700.0020.0001.0004 This attribute defines the state capabilities for this Remote Access user. |
| DEL remoteUserAdminStateSettings | 1.3.6.1.4.1.674.10892.1.1700.20.1.5 | DellRemoteUserAdminStateSettings | read-write | 1700.0020.0001.0005 This attribute defines the state settings for this Remote Access user. |
| DEL remoteUserAdminStatus | 1.3.6.1.4.1.674.10892.1.1700.20.1.6 | DellStatus | read-only | 1700.0020.0001.0006 This attribute defines the status for this Remote Access user. |
| STR remoteUserAdminUserName | 1.3.6.1.4.1.674.10892.1.1700.20.1.7 | DisplayString | read-write | 1700.0020.0001.0007 This attribute defines the name for this Remote Access user. |
| STR remoteUserAdminUserPasswordName | 1.3.6.1.4.1.674.10892.1.1700.20.1.8 | DisplayString | read-write | 1700.0020.0001.0008 This attribute defines the password for this Remote Access user. |
| STR remoteUserAdminUserPrivilege | 1.3.6.1.4.1.674.10892.1.1700.20.1.9 | DisplayString | read-write | 1700.0020.0001.0009 This attribute defines the privileges for this Remote Access user. |
| STR remoteUserAdminUserPrivilegeCapabilities | 1.3.6.1.4.1.674.10892.1.1700.20.1.10 | DisplayString | read-only | 1700.0020.0001.0010 This attribute defines the privilege capabilities for this Remote Access user. |
| DEL remoteUserAdminAlertFilterDrsEventsMask | 1.3.6.1.4.1.674.10892.1.1700.20.1.11 | DellUnsigned32BitRange | read-write | 1700.0020.0001.0011 This attribute defines the DRS events filter mask for this Remote Access user. |
| DEL remoteUserAdminAlertFilterSysEventsMask | 1.3.6.1.4.1.674.10892.1.1700.20.1.12 | DellUnsigned32BitRange | read-write | 1700.0020.0001.0012 This attribute defines the system events filter mask for this Remote Access user. |
| DEL remoteUserAdminAlertFilterDrsCapabilities | 1.3.6.1.4.1.674.10892.1.1700.20.1.13 | DellUnsigned32BitRange | read-only | 1700.0020.0001.0013 This attribute defines the DRS events filter capabilities for this Remote Access user. |
| DEL remoteUserAdminAlertFilterSysCapabilities | 1.3.6.1.4.1.674.10892.1.1700.20.1.14 | DellUnsigned32BitRange | read-only | 1700.0020.0001.0014 This attribute defines the system events filter capabilities for this Remote Access user. |
| STR remoteUserAdminPagerNumericNumberName | 1.3.6.1.4.1.674.10892.1.1700.20.1.15 | DisplayString | read-write | 1700.0020.0001.0015 This attribute defines the numeric pager number for this for this Remote Access user. |
| STR remoteUserAdminPagerNumericMessageName | 1.3.6.1.4.1.674.10892.1.1700.20.1.16 | DisplayString | read-write | 1700.0020.0001.0016 This attribute defines the message to send to the numeric pager for this Remote Access user. |
| DEL remoteUserAdminPagerNumericHangupDelay | 1.3.6.1.4.1.674.10892.1.1700.20.1.17 | DellUnsigned32BitRange | read-write | 1700.0020.0001.0017 This attribute defines the numeric pager hangup delay for this Remote Access user. |
| STR remoteUserAdminPagerAlphaPhoneNumberName | 1.3.6.1.4.1.674.10892.1.1700.20.1.18 | DisplayString | read-write | 1700.0020.0001.0018 This attribute defines the alphanumeric pager phone number for this Remote Access user. |
| DEL remoteUserAdminPagerAlphaProtocol | 1.3.6.1.4.1.674.10892.1.1700.20.1.19 | DellRemoteUserAdminAlphaProtocolType | read-write | 1700.0020.0001.0019 This attribute defines the protocol used by the alphanumeric pager provider for this Remote Access user. |
| DEL remoteUserAdminPagerAlphaBaudRate | 1.3.6.1.4.1.674.10892.1.1700.20.1.20 | DellRemoteUserAdminAlphaBaudType | read-write | 1700.0020.0001.0020 This attribute defines the baud rate used by the alphanumeric pager provider for this Remote Access user. |
| STR remoteUserAdminPagerAlphaCustomMessageName | 1.3.6.1.4.1.674.10892.1.1700.20.1.21 | DisplayString | read-write | 1700.0020.0001.0021 This attribute defines the message to be sent to the alphanumeric pager to inform the user of a call by this Remote Access user. |
| DEL remoteUserAdminPagerAlphaModemConnectTimeout | 1.3.6.1.4.1.674.10892.1.1700.20.1.22 | DellUnsigned32BitRange | read-write | 1700.0020.0001.0022 This attribute defines the modem connection timeout for the alhpanumeric pager for this Remote Access user. |
| STR remoteUserAdminPagerAlphaPagerIdName | 1.3.6.1.4.1.674.10892.1.1700.20.1.23 | DisplayString | read-write | 1700.0020.0001.0023 This attribute defines the ID to be sent to the alphanumeric pager to inform the user of a call by this Remote Access user. |
| STR remoteUserAdminPagerAlphaPasswordName | 1.3.6.1.4.1.674.10892.1.1700.20.1.24 | DisplayString | read-write | 1700.0020.0001.0024 This attribute defines the password for the alphanumeric pager for this Remote Access user. |
| STR remoteUserAdminPagerModemInitStringName | 1.3.6.1.4.1.674.10892.1.1700.20.1.25 | DisplayString | read-write | 1700.0020.0001.0025 This attribute defines the initialization string to be sent to the pager modem for this Remote Access user. |
| DEL remoteUserAdminPagerModemPort | 1.3.6.1.4.1.674.10892.1.1700.20.1.26 | DellUnsigned32BitRange | read-write | 1700.0020.0001.0026 This attribute defines the port for the pager modem for this Remote Access user. |
| STR remoteUserAdminEmailAddressName | 1.3.6.1.4.1.674.10892.1.1700.20.1.27 | DisplayString | read-write | 1700.0020.0001.0027 This attribute defines the email address for this Remote Access user. |
| STR remoteUserAdminEmailCustomMessageName | 1.3.6.1.4.1.674.10892.1.1700.20.1.28 | DisplayString | read-write | 1700.0020.0001.0028 This attribute defines the email message to send to this Remote Access user. |
| DEL remoteUserAdminControlCapabilities | 1.3.6.1.4.1.674.10892.1.1700.20.1.29 | DellRemoteUserAdminControlCapabilities | read-only | 1700.0020.0001.0029 This attribute defines the control capabilities for this Remote Access user. |
| DEL remoteUserAdminControlSettings | 1.3.6.1.4.1.674.10892.1.1700.20.1.30 | DellRemoteUserAdminControlSettings | read-write | 1700.0020.0001.0030 This attribute defines the control settings for this Remote Access user. |
| DEL remoteUserAdminUserType | 1.3.6.1.4.1.674.10892.1.1700.20.1.31 | DellUnsigned8BitRange | read-write | 1700.0020.0001.0031 This attribute defines the type of this Remote Access user. |
| remoteSNMPTrapTable | 1.3.6.1.4.1.674.10892.1.1700.30 | not-accessible | 1700.0030 This object defines the Remote Access SNMP Trap Destination table. | |
| remoteSNMPTrapTableEntry | 1.3.6.1.4.1.674.10892.1.1700.30.1 | not-accessible | 1700.0030.0001 This object defines the Remote Access SNMP Trap Destination table entry. | |
| DEL remoteSNMPTrapChassisIndex | 1.3.6.1.4.1.674.10892.1.1700.30.1.1 | DellObjectRange | read-only | 1700.0030.0001.0001 This attribute defines the index (one based) of the chassis containing the Remote Access hardware. |
| DEL remoteSNMPTrapAdapterIndex | 1.3.6.1.4.1.674.10892.1.1700.30.1.2 | DellObjectRange | read-only | 1700.0030.0001.0002 This attribute defines the index (one based) of the Remote Access hardware that uses this SNMP trap destination. |
| DEL remoteSNMPTrapIndex | 1.3.6.1.4.1.674.10892.1.1700.30.1.3 | DellObjectRange | read-only | 1700.0030.0001.0003 This attribute defines the index (one based) of this Remote Access SNMP trap destination. |
| DEL remoteSNMPTrapStateCapabilities | 1.3.6.1.4.1.674.10892.1.1700.30.1.4 | DellRemoteSNMPTrapStateCapabilities | read-only | 1700.0030.0001.0004 This attribute defines the state capabilities of this Remote Access SNMP trap destination. |
| DEL remoteSNMPTrapStateSettings | 1.3.6.1.4.1.674.10892.1.1700.30.1.5 | DellRemoteSNMPTrapStateSettings | read-write | 1700.0030.0001.0005 This attribute defines the state settings of this Remote Access SNMP trap destination. |
| DEL remoteSNMPTrapStatus | 1.3.6.1.4.1.674.10892.1.1700.30.1.6 | DellStatus | read-only | 1700.0030.0001.0006 This attribute defines the status of this Remote Access SNMP trap destination. |
| IP remoteSNMPTrapDestinationIPAddress | 1.3.6.1.4.1.674.10892.1.1700.30.1.7 | IpAddress | read-write | 1700.0030.0001.0007 This attribute defines the IP address of this Remote Access SNMP trap destination. |
| STR remoteSNMPTrapSNMPCommunityName | 1.3.6.1.4.1.674.10892.1.1700.30.1.8 | DisplayString | read-write | 1700.0030.0001.0008 This attribute defines the community for traps sent to this Remote Access SNMP trap destination. |
| DEL remoteSNMPTrapFilterDrsEventsMask | 1.3.6.1.4.1.674.10892.1.1700.30.1.9 | DellUnsigned32BitRange | read-write | 1700.0030.0001.0009 This attribute defines the DRS events filter mask for this Remote Access SNMP trap destination. |
| DEL remoteSNMPTrapFilterSysEventsMask | 1.3.6.1.4.1.674.10892.1.1700.30.1.10 | DellUnsigned32BitRange | read-write | 1700.0030.0001.0010 This attribute defines the system events filter mask for this Remote Access SNMP trap destination. |
| DEL remoteSNMPTrapFilterDrsCapabilities | 1.3.6.1.4.1.674.10892.1.1700.30.1.11 | DellUnsigned32BitRange | read-only | 1700.0030.0001.0011 This attribute defines the DRS events filter capabilities for this Remote Access SNMP trap destination. |
| DEL remoteSNMPTrapFilterSysCapabilities | 1.3.6.1.4.1.674.10892.1.1700.30.1.12 | DellUnsigned32BitRange | read-only | 1700.0030.0001.0012 This attribute defines the system events filter capabilities for this Remote Access SNMP trap destination. |
| DEL remoteSNMPTrapControlCapabilities | 1.3.6.1.4.1.674.10892.1.1700.30.1.13 | DellRemoteSNMPTrapControlCapabilities | read-only | 1700.0030.0001.0013 This attribute defines the control capabilities of this Remote Access SNMP trap destination. |
| DEL remoteSNMPTrapControlSettings | 1.3.6.1.4.1.674.10892.1.1700.30.1.14 | DellRemoteSNMPTrapControlSettings | read-write | 1700.0030.0001.0014 This attribute defines the control settings of this Remote Access SNMP trap destination. |
| remoteDialUpTable | 1.3.6.1.4.1.674.10892.1.1700.40 | not-accessible | 1700.0040 This object defines the Remote Access Dial Up table. | |
| remoteDialUpTableEntry | 1.3.6.1.4.1.674.10892.1.1700.40.1 | not-accessible | 1700.0040.0001 This object defines the Remote Access Dial Up table entry. | |
| DEL remoteDialUpChassisIndex | 1.3.6.1.4.1.674.10892.1.1700.40.1.1 | DellObjectRange | read-only | 1700.0040.0001.0001 This attribute defines the index (one based) of the chassis containing the Remote Access hardware. |
| DEL remoteDialUpAdapterIndex | 1.3.6.1.4.1.674.10892.1.1700.40.1.2 | DellObjectRange | read-only | 1700.0040.0001.0002 This attribute defines the index (one based) of the Remote Access hardware that supports this Remote Access Dial Up functionality. |
| DEL remoteDialUpIndex | 1.3.6.1.4.1.674.10892.1.1700.40.1.3 | DellObjectRange | read-only | 1700.0040.0001.0003 This attribute defines the index (one based) of this Remote Access Dial Up functionality. |
| DEL remoteDialUpStateCapabilities | 1.3.6.1.4.1.674.10892.1.1700.40.1.4 | DellRemoteDialUpStateCapabilities | read-only | 1700.0040.0001.0004 This attribute defines the state capabilities of this Remote Access Dial Up functionality. |
| DEL remoteDialUpStateSettings | 1.3.6.1.4.1.674.10892.1.1700.40.1.5 | DellRemoteDialUpStateSettings | read-write | 1700.0040.0001.0005 This attribute defines the state settings of this Remote Access Dial Up functionality. |
| DEL remoteDialUpStatus | 1.3.6.1.4.1.674.10892.1.1700.40.1.6 | DellStatus | read-only | 1700.0040.0001.0006 This attribute defines the status of this Remote Access Dial Up functionality. |
| IP remoteDialUpPPPDialInBaseIPAddress | 1.3.6.1.4.1.674.10892.1.1700.40.1.7 | IpAddress | read-write | 1700.0040.0001.0007 This attribute defines the base IP address of the PPP server for this Remote Access Dial Up functionality. |
| DEL remoteDialUpPPPDialInIdleTimeout | 1.3.6.1.4.1.674.10892.1.1700.40.1.8 | DellUnsigned32BitRange | read-write | 1700.0040.0001.0008 This attribute defines the PPP idle timeout value in seconds for this Remote Access Dial Up functionality. |
| DEL remoteDialUpPPPDialInMaxConnectTimeout | 1.3.6.1.4.1.674.10892.1.1700.40.1.9 | DellUnsigned32BitRange | read-write | 1700.0040.0001.0009 This attribute defines the PPP connect timeout value in seconds for this Remote Access Dial Up functionality. |
| DEL remoteDialUpDialOutModemConnectTimeout | 1.3.6.1.4.1.674.10892.1.1700.40.1.10 | DellUnsigned32BitRange | read-write | 1700.0040.0001.0010 This attribute defines the modem dial out connect timeout value in seconds for this Remote Access Dial Up functionality. |
| DEL remoteDialUpModemDialType | 1.3.6.1.4.1.674.10892.1.1700.40.1.11 | DellRemoteDialUpModemDialType | read-write | 1700.0040.0001.0011 This attribute defines the dial type for the modem used by this Remote Access Dial Up functionality. |
| STR remoteDialUpModemInitStringName | 1.3.6.1.4.1.674.10892.1.1700.40.1.12 | DisplayString | read-write | 1700.0040.0001.0012 This attribute defines the initialization string to be sent to the modem for this Remote Access Dial Up functionality. |
| DEL remoteDialUpModemBaudRate | 1.3.6.1.4.1.674.10892.1.1700.40.1.13 | DellUnsigned32BitRange | read-write | 1700.0040.0001.0013 This attribute defines the baud rate for the modem used by this Remote Access Dial Up functionality. |
| DEL remoteDialUpModemPort | 1.3.6.1.4.1.674.10892.1.1700.40.1.14 | DellUnsigned32BitRange | read-write | 1700.0040.0001.0014 This attribute defines the port for the modem used by this Remote Access Dial Up functionality. |
| remoteUserDialInCfgTable | 1.3.6.1.4.1.674.10892.1.1700.50 | not-accessible | 1700.0050 This object defines the Remote Access User Dial In Configuration table. | |
| remoteUserDialInCfgTableEntry | 1.3.6.1.4.1.674.10892.1.1700.50.1 | not-accessible | 1700.0050.0001 This object defines the Remote Access User Dial In Configuration table entry. | |
| DEL remoteUserDialInCfgChassisIndex | 1.3.6.1.4.1.674.10892.1.1700.50.1.1 | DellObjectRange | read-only | 1700.0050.0001.0001 This attribute defines the index (one based) of the chassis containing the Remote Access hardware. |
| DEL remoteUserDialInCfgAdapterIndex | 1.3.6.1.4.1.674.10892.1.1700.50.1.2 | DellObjectRange | read-only | 1700.0050.0001.0002 This attribute defines the index (one based) of Remote Access hardware that supports this Remote Access Dial In user. |
| DEL remoteUserDialInCfgUserIndex | 1.3.6.1.4.1.674.10892.1.1700.50.1.3 | DellObjectRange | read-only | 1700.0050.0001.0003 This attribute defines the index (one based) of this Remote Access Dial In user. |
| DEL remoteUserDialInCfgStateCapabilities | 1.3.6.1.4.1.674.10892.1.1700.50.1.4 | DellRemoteUserDialInStateCapabilities | read-only | 1700.0050.0001.0004 This attribute defines the state capabilities of this Remote Access Dial In user. |
| DEL remoteUserDialInCfgStateSettings | 1.3.6.1.4.1.674.10892.1.1700.50.1.5 | DellRemoteUserDialInStateSettings | read-write | 1700.0050.0001.0005 This attribute defines the state settings of this Remote Access Dial In user. |
| DEL remoteUserDialInCfgStatus | 1.3.6.1.4.1.674.10892.1.1700.50.1.6 | DellStatus | read-only | 1700.0050.0001.0006 This attribute defines the status of this Remote Access Dial In user. |
| STR remoteUserDialInCfgPPPUserName | 1.3.6.1.4.1.674.10892.1.1700.50.1.7 | DisplayString | read-write | 1700.0050.0001.0007 This attribute defines the PPP user name of this Remote Access Dial In user. |
| STR remoteUserDialInCfgPPPUserPasswordName | 1.3.6.1.4.1.674.10892.1.1700.50.1.8 | DisplayString | read-write | 1700.0050.0001.0008 This attribute defines the PPP password for this Remote Access Dial In user. |
| STR remoteUserDialInCfgCallbackPhoneNumberName | 1.3.6.1.4.1.674.10892.1.1700.50.1.9 | DisplayString | read-write | 1700.0050.0001.0009 This attribute defines the callback phone number for this Remote Access Dial In user. |
| remoteDialOutTable | 1.3.6.1.4.1.674.10892.1.1700.60 | not-accessible | 1700.0060 This object defines the Remote Access Dial Out table. | |
| remoteDialOutTableEntry | 1.3.6.1.4.1.674.10892.1.1700.60.1 | not-accessible | 1700.0060.0001 This object defines the Remote Access Dial Out table entry. | |
| DEL remoteDialOutChassisIndex | 1.3.6.1.4.1.674.10892.1.1700.60.1.1 | DellObjectRange | read-only | 1700.0060.0001.0001 This attribute defines the index (one based) of the chassis containing the Remote Access hardware. |
| DEL remoteDialOutAdapterIndex | 1.3.6.1.4.1.674.10892.1.1700.60.1.2 | DellObjectRange | read-only | 1700.0060.0001.0002 This attribute defines the index (one based) of the Remote Access hardware that supports this Remote Access Dial Out functionality. |
| DEL remoteDialOutDialOutIndex | 1.3.6.1.4.1.674.10892.1.1700.60.1.3 | DellObjectRange | read-only | 1700.0060.0001.0003 This attribute defines the index (one based) of this Remote Access Dial Out functionality. |
| DEL remoteDialOutStateCapabilities | 1.3.6.1.4.1.674.10892.1.1700.60.1.4 | DellRemoteDialOutStateCapabilities | read-only | 1700.0060.0001.0004 This attribute defines the state capabilities of this Remote Access Dial Out functionality. |
| DEL remoteDialOutStateSettings | 1.3.6.1.4.1.674.10892.1.1700.60.1.5 | DellRemoteDialOutStateSettings | read-write | 1700.0060.0001.0005 This attribute defines the state settings of this Remote Access Dial Out functionality. |
| DEL remoteDialOutStatus | 1.3.6.1.4.1.674.10892.1.1700.60.1.6 | DellStatus | read-only | 1700.0060.0001.0006 This attribute defines the status of this Remote Dial Out functionality. |
| IP remoteDialOutIPAddress | 1.3.6.1.4.1.674.10892.1.1700.60.1.7 | IpAddress | read-write | 1700.0060.0001.0007 This attribute defines the IP address for this Remote Access Dial Out destination. |
| STR remoteDialOutPhoneNumberName | 1.3.6.1.4.1.674.10892.1.1700.60.1.8 | DisplayString | read-write | 1700.0060.0001.0008 This attribute defines the phone number for this Remote Access Dial Out destination. |
| STR remoteDialOutPPPUserName | 1.3.6.1.4.1.674.10892.1.1700.60.1.9 | DisplayString | read-write | 1700.0060.0001.0009 This attribute defines the PPP user name for this Remote Access Dial Out destination. |
| STR remoteDialOutPPPPasswordName | 1.3.6.1.4.1.674.10892.1.1700.60.1.10 | DisplayString | read-write | 1700.0060.0001.0010 This attribute defines the PPP password for this Remote Access Dial Out destination. |
| drsOutOfBandGroup | 1.3.6.1.4.1.674.10892.2 |
RFC description
Dell Server Administrator remote access management for baseboard and DRS capabilities.
Start monitoring Dell PowerEdge/DCS3-class server chassis (remote access controller) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.