All MIBs › HUAWEI-WLAN-GLOBAL-MIB
Organization: Huawei Technologies Co.,Ltd.
Last Updated: 2020-01-18
Category: Technology: Wireless, Vendor: Huawei, Wireless and WLAN
Description: Huawei WLAN MIB defining global configuration and status objects for the wireless LAN subsystem of Huawei network devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-WLAN-GLOBAL-MIB?
HUAWEI-WLAN-GLOBAL-MIB is a Huawei Technologies proprietary MIB reporting controller-wide WLAN capacity and performance statistics. Its objects cover global work mode, max AP/station numbers, failed branch-group file-load count, current joined-AP and associated-station counts (overall, 2.4GHz, 5GHz, dual-band), reassociation-success count, global up/down speed, current Layer-3-roaming station count, per-band station type breakdowns, and compliance-rate metrics for data rate/SNR/resend-rate/drop-rate. As a performance MIB it lets an administrator watch controller-wide AP/station capacity utilization and per-band client compliance rates. It is deployed on Huawei Technologies WLAN controllers. Engineers can download the HUAWEI-WLAN-GLOBAL-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-WLAN-GLOBAL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei Technologies WLAN controllers
Monitoring Examples
An administrator monitors hwWlanCurAssocStaNum against hwWlanAccessMaxStaNumber to catch a Huawei WLAN controller approaching its station-capacity limit.
What Can Be Monitored
- controller-wide AP/station capacity and compliance-rate statistics
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-WLAN-MIB
| hwWlan | MODULE-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| MacAddress | |
| RowStatus |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| I32 hwBranchGroupFileLoadFailGroupNum | 1.3.6.1.4.1.2011.6.139.12.1.1.4 | Integer32 | read-only | This object indicates the number of branch groups that failed to load the certificate. |
| U32 hwStaDropRateNoncompliance2gCnt | 1.3.6.1.4.1.2011.6.139.12.1.3.9 | Unsigned32 | read-only | This object indicates the number of STAs whose 2.4G packet loss rate (PLR) fails to meet the compliance standard. Compliance standard: PLR < x (x = 5%). |
| U32 hwStaDropRateNoncompliance5gCnt | 1.3.6.1.4.1.2011.6.139.12.1.3.14 | Unsigned32 | read-only | This object indicates the number of STAs whose 5G packet loss rate (PLR) fails to meet the compliance standard. Compliance standard: PLR < x (x = 5%). |
| OCT hwStaGlobalAccessExperience | 1.3.6.1.4.1.2011.6.139.12.1.3.19 | OCTET STRING | read-only | This object indicates the access experience of the stations. |
| U32 hwStaGlobalAssocRate | 1.3.6.1.4.1.2011.6.139.12.1.3.20 | Unsigned32 | read-only | This object indicates the associate rate of station. |
| U32 hwStaGlobalAuthRateDot1x | 1.3.6.1.4.1.2011.6.139.12.1.3.21 | Unsigned32 | read-only | This object indicates the Dot1x authentication rate of station. |
| U32 hwStaGlobalAuthRateMac | 1.3.6.1.4.1.2011.6.139.12.1.3.23 | Unsigned32 | read-only | This object indicates the Mac authentication rate of station. |
| U32 hwStaGlobalAuthRatePortal | 1.3.6.1.4.1.2011.6.139.12.1.3.22 | Unsigned32 | read-only | This object indicates the Portal authentication rate of station. |
| U32 hwStaGlobalTotalAccessTime | 1.3.6.1.4.1.2011.6.139.12.1.3.18 | Unsigned32 | read-only | This object indicates the average online time of the stations. |
| U32 hwStaGlobalWirelessPacketDelay | 1.3.6.1.4.1.2011.6.139.12.1.3.16 | Unsigned32 | read-only | This object indicates the average packet delay of the stations. |
| U32 hwStaGlobalWirelessPacketDropRate | 1.3.6.1.4.1.2011.6.139.12.1.3.17 | Unsigned32 | read-only | This object indicates the average packet drop rate of the stations. |
| U32 hwStaRateNoncompliance2gCnt | 1.3.6.1.4.1.2011.6.139.12.1.3.7 | Unsigned32 | read-only | This object indicates the number of STAs whose 2.4G rate fails to meet the compliance standard. Compliance standard: Rate > x (x = 12 Mbps). |
| U32 hwStaRateNoncompliance5gCnt | 1.3.6.1.4.1.2011.6.139.12.1.3.12 | Unsigned32 | read-only | This object indicates the number of STAs whose 5G rate fails to meet the compliance standard. Compliance standard: Rate > x (x = 12 Mbps). |
| U32 hwStaResendRateNoncompliance2gCnt | 1.3.6.1.4.1.2011.6.139.12.1.3.8 | Unsigned32 | read-only | This object indicates the number of STAs whose 2.4G retransmission rate (RR) fails to meet the compliance standard. Compliance standard: RR < x (x = 50%). |
| U32 hwStaResendRateNoncompliance5gCnt | 1.3.6.1.4.1.2011.6.139.12.1.3.13 | Unsigned32 | read-only | This object indicates the number of STAs whose 5G retransmission rate (RR) fails to meet the compliance standard. Compliance standard: RR < x (x = 50%). |
| U32 hwStaSnrNoncompliance2gCnt | 1.3.6.1.4.1.2011.6.139.12.1.3.6 | Unsigned32 | read-only | This object indicates the number of STAs whose 2.4G SNR fails to meet the compliance standard. Compliance standard: SNR > x (x = 20 dB). |
| U32 hwStaSnrNoncompliance5gCnt | 1.3.6.1.4.1.2011.6.139.12.1.3.11 | Unsigned32 | read-only | This object indicates the number of STAs whose 5G SNR fails to meet the compliance standard. Compliance standard: SNR > x (x = 20 dB). |
| U32 hwStaThruputNoncompliance2gCnt | 1.3.6.1.4.1.2011.6.139.12.1.3.10 | Unsigned32 | read-only | This object indicates the number of STAs whose 2.4G throughput fails to meet the compliance standard. (Here the throughput refers to a sum of the uplink and the downlink throughput.) Compliance standard: Throughput > x (x = 12 Mbps). |
| U32 hwStaThruputNoncompliance5gCnt | 1.3.6.1.4.1.2011.6.139.12.1.3.15 | Unsigned32 | read-only | This object indicates the number of STAs whose 5G throughput fails to meet the compliance standard. (Here the throughput refers to a sum of the uplink and the downlink throughput.) Compliance standard: Throughput > x (x = 12 Mbps). |
| I32 hwWlan2gOnlineStaCnt | 1.3.6.1.4.1.2011.6.139.12.1.6.1.3 | Integer32 | read-only | This object indicates the number of users connected to the 2.4G radio. |
| I32 hwWlan5gOnlineStaCnt | 1.3.6.1.4.1.2011.6.139.12.1.6.1.4 | Integer32 | read-only | This object indicates the number of users connected to the 5G radio. |
| I32 hwWlanAccessMaxApNumber | 1.3.6.1.4.1.2011.6.139.12.1.1.2 | Integer32 | read-only | This object indicates the maximum number of APs. |
| I32 hwWlanAccessMaxStaNumber | 1.3.6.1.4.1.2011.6.139.12.1.1.3 | Integer32 | read-only | This object indicates the maximum number of STAs connected to an AC. |
| I32 hwWlanApComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.5.5 | Integer32 | read-only | This object indicates the total AP compliance ratio. |
| I32 hwWlanApCount | 1.3.6.1.4.1.2011.6.139.12.1.5.7 | Integer32 | read-only | This object indicates the total of AP. |
| OCT hwWlanApGpStatAPGroupName | 1.3.6.1.4.1.2011.6.139.12.1.9.1.1 | OCTET STRING | not-accessible | This object indicates the name of an AP group. It is the index of the table. |
| U32 hwWlanApGpStatCurAssoc2gStaNum | 1.3.6.1.4.1.2011.6.139.12.1.9.1.2 | Unsigned32 | read-only | This object indicates the number of 2G users in an AP group. |
| U32 hwWlanApGpStatCurAssoc5gStaNum | 1.3.6.1.4.1.2011.6.139.12.1.9.1.3 | Unsigned32 | read-only | This object indicates the number of 5G users in an AP group. |
| hwWlanApGroupStatisticsEntry | 1.3.6.1.4.1.2011.6.139.12.1.9.1 | not-accessible | The index of this table is hwWlanApGpStatAPGroupName. | |
| hwWlanApGroupStatisticsGroup | 1.3.6.1.4.1.2011.6.139.12.2.2.9 | Description. | ||
| hwWlanApGroupStatisticsTable | 1.3.6.1.4.1.2011.6.139.12.1.9 | not-accessible | This table collects statistics about 2G and 5G users in AP groups. | |
| I32 hwWlanApNormalRatio | 1.3.6.1.4.1.2011.6.139.12.1.5.1 | Integer32 | read-only | This object indicates the proportion of APs in normal and commit states to all APs. Unit: 0.01. |
| I32 hwWlanApStaOfflineRateComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.5.3 | Integer32 | read-only | This object indicates compliance ratio of the AP's STA offline rate. Unit: 0.01 Compliance standard: STA offline rate x (x = 20%) Offline rate = hwStaExceptionalOfflineCnt/hwStaAuthenRequestSuccessCount. Abnormal APs are those in fault, version mismatch, and type mismatch. |
| I32 hwWlanApStaOnlineCntComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.5.4 | Integer32 | read-only | This object indicates compliance ratio of the number of access STAs on an AP. Unit: 0.01 Compliance standard: Access STAs < x (x = 40). Access STAs refer to online STAs. Abnormal APs are those in fault, version mismatch, and type mismatch. |
| I32 hwWlanApStaOnlineFailRateComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.5.2 | Integer32 | read-only | This object indicates compliance ratio of the AP's STA access failure rate. Unit: 0.01 Compliance standard: STA access failure rate < x (x = 20%) Access failure rate = (hwStaAccessRequestFailedCount+hwStaAuthenRequestFailedCount)/(hwStaAssocAndReAssocRequestCount+hwStaAuthenRequestCount). |
| NTF hwWlanBackLicAgeRestoreTrap | 1.3.6.1.4.1.2011.6.139.12.3.1.2 | The backup license stops aging. | ||
| NTF hwWlanBackLicAgeTrap | 1.3.6.1.4.1.2011.6.139.12.3.1.1 | Backup license aging alarm. | ||
| I32 hwWlanBackupLicense | 1.3.6.1.4.1.2011.6.139.12.1.8.1.2 | Integer32 | read-only | Description. |
| hwWlanBackupLicenseEntry | 1.3.6.1.4.1.2011.6.139.12.1.8.1 | not-accessible | Description. | |
| hwWlanBackupLicenseGroup | 1.3.6.1.4.1.2011.6.139.12.2.2.8 | Description. | ||
| hwWlanBackupLicenseTable | 1.3.6.1.4.1.2011.6.139.12.1.8 | not-accessible | Description. | |
| I32 hwWlanCurAssoc2gStaNum | 1.3.6.1.4.1.2011.6.139.12.1.2.5 | Integer32 | read-only | This object indicates the total number of 2.4G users on an AC. |
| OCT hwWlanCurAssoc2gStaType | 1.3.6.1.4.1.2011.6.139.12.1.2.11 | OCTET STRING | read-only | This object indicates the numbers of 2.4G users with different rfmodes on an AC. |
| I32 hwWlanCurAssoc5gStaNum | 1.3.6.1.4.1.2011.6.139.12.1.2.6 | Integer32 | read-only | This object indicates the total number of 5G users on an AC. |
| OCT hwWlanCurAssoc5gStaType | 1.3.6.1.4.1.2011.6.139.12.1.2.12 | OCTET STRING | read-only | This object indicates the numbers of 5G users with different rfmodes on an AC. |
| I32 hwWlanCurAssocStaNum | 1.3.6.1.4.1.2011.6.139.12.1.2.2 | Integer32 | read-only | This object indicates the number of associated users on an AC. |
| I32 hwWlanCurAuthSuccessStaNum | 1.3.6.1.4.1.2011.6.139.12.1.2.3 | Integer32 | read-only | This object indicates the total number of online STAs on an AC. |
| I32 hwWlanCurJointApNum | 1.3.6.1.4.1.2011.6.139.12.1.2.1 | Integer32 | read-only | This object indicates the number of APs currently connected to an AC. |
| I32 hwWlanCurrentL3RoamStaCnt | 1.3.6.1.4.1.2011.6.139.12.1.2.10 | Integer32 | read-only | This object indicates the count of current L3 roam stations. |
| I32 hwWlanDownSpeedHistory | 1.3.6.1.4.1.2011.6.139.12.1.7.1.3 | Integer32 | read-only | This object indicates downlink effective throughput of the AC.Unit: Kbps. |
| I32 hwWlanDualBandStaNum | 1.3.6.1.4.1.2011.6.139.12.1.2.7 | Integer32 | read-only | This object indicates the number of dual-band STAs. |
| hwWlanGlobalAcStatistics | 1.3.6.1.4.1.2011.6.139.12.1.2 | |||
| hwWlanGlobalApStatistics | 1.3.6.1.4.1.2011.6.139.12.1.5 | |||
| hwWlanGlobalApStatisticsGroup | 1.3.6.1.4.1.2011.6.139.12.2.2.5 | Description. | ||
| U32 hwWlanGlobalDownSpeed | 1.3.6.1.4.1.2011.6.139.12.1.2.9 | Unsigned32 | read-only | This object indicates the downstream rate of the system (downlink throughput). |
| hwWlanGlobalManagement | 1.3.6.1.4.1.2011.6.139.12 | V1.15 Modify the node hwWlanUpSpeedHistory. | ||
| hwWlanGlobalManagementCompliance | 1.3.6.1.4.1.2011.6.139.12.2.1.1 | Description. | ||
| hwWlanGlobalManagementCompliances | 1.3.6.1.4.1.2011.6.139.12.2.1 | |||
| hwWlanGlobalManagementConformance | 1.3.6.1.4.1.2011.6.139.12.2 | |||
| hwWlanGlobalManagementObjectGroups | 1.3.6.1.4.1.2011.6.139.12.2.2 | |||
| hwWlanGlobalObjects | 1.3.6.1.4.1.2011.6.139.12.1 | |||
| hwWlanGlobalPara | 1.3.6.1.4.1.2011.6.139.12.1.1 | |||
| hwWlanGlobalParaGroup | 1.3.6.1.4.1.2011.6.139.12.2.2.1 | Description. | ||
| hwWlanGlobalRfStatistics | 1.3.6.1.4.1.2011.6.139.12.1.4 | |||
| hwWlanGlobalRfStatisticsGroup | 1.3.6.1.4.1.2011.6.139.12.2.2.4 | Description. | ||
| hwWlanGlobalStaStatistics | 1.3.6.1.4.1.2011.6.139.12.1.3 | |||
| hwWlanGlobalStaStatisticsGroup | 1.3.6.1.4.1.2011.6.139.12.2.2.3 | Description. | ||
| hwWlanGlobalStatisticsGroup | 1.3.6.1.4.1.2011.6.139.12.2.2.2 | Description. | ||
| hwWlanGlobalTrap | 1.3.6.1.4.1.2011.6.139.12.3.1 | |||
| hwWlanGlobalTrapInfo | 1.3.6.1.4.1.2011.6.139.12.3 | |||
| hwWlanGlobalTrapObjects | 1.3.6.1.4.1.2011.6.139.12.3.2 | |||
| U32 hwWlanGlobalUpSpeed | 1.3.6.1.4.1.2011.6.139.12.1.2.8 | Unsigned32 | read-only | This object indicates the upstream rate of the system (uplink throughput). |
| INT hwWlanGlobalWorkMode | 1.3.6.1.4.1.2011.6.139.12.1.1.1 | INTEGER | read-only | Description. |
| OCT hwWlanLicenseBackType | 1.3.6.1.4.1.2011.6.139.12.1.8.1.5 | OCTET STRING | read-only | Backup license source type. |
| OCT hwWlanLicenseBackupTime | 1.3.6.1.4.1.2011.6.139.12.1.8.1.4 | OCTET STRING | read-only | Description. |
| I32 hwWlanLicenseOrigin | 1.3.6.1.4.1.2011.6.139.12.1.8.1.3 | Integer32 | read-only | Description. |
| MAC hwWlanMainAcMac | 1.3.6.1.4.1.2011.6.139.12.1.8.1.1 | MacAddress | read-only | Description. |
| I32 hwWlanOnlineStaCnt | 1.3.6.1.4.1.2011.6.139.12.1.6.1.2 | Integer32 | read-only | This object indicates the number of access users. |
| hwWlanOnlineStaCntHistoryEntry | 1.3.6.1.4.1.2011.6.139.12.1.6.1 | not-accessible | The index of this table is hwWlanOnlineStaCntTime. | |
| hwWlanOnlineStaCntHistoryGroup | 1.3.6.1.4.1.2011.6.139.12.2.2.6 | Description. | ||
| hwWlanOnlineStaCntHistoryTable | 1.3.6.1.4.1.2011.6.139.12.1.6 | not-accessible | This table describes historical number of access users, which is counted every 1 min. The AC stores data in the latest 15 min. | |
| U32 hwWlanOnlineStaCntTime | 1.3.6.1.4.1.2011.6.139.12.1.6.1.1 | Unsigned32 | not-accessible | This object indicates the count time. It is the index of the table. |
| NTF hwWlanPoolLicAgeRestoreTrap | 1.3.6.1.4.1.2011.6.139.12.3.1.6 | License resource pool aging restore. | ||
| NTF hwWlanPoolLicAgeTrap | 1.3.6.1.4.1.2011.6.139.12.3.1.5 | License resource pool aging. | ||
| I32 hwWlanPoolSelfShareLicNum | 1.3.6.1.4.1.2011.6.139.12.3.2.4 | Integer32 | read-only | The total number of self shared in license pool . |
| I32 hwWlanPoolTotalLicNum | 1.3.6.1.4.1.2011.6.139.12.3.2.3 | Integer32 | read-only | The total number in license pool. |
| I32 hwWlanReassocSuccessTimes | 1.3.6.1.4.1.2011.6.139.12.1.2.4 | Integer32 | read-only | This object indicates the number of successful roaming times on an AC. |
| I32 hwWlanRfChannelJamRateComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.4.3 | Integer32 | read-only | This objects indicates compliance ratio of the RF interference ratio. Unit: 0.01 Compliance standard: Interference ratio < x (x = 40%). |
| U32 hwWlanRfChannelJamRateNoncompliance2gCnt | 1.3.6.1.4.1.2011.6.139.12.1.4.10 | Unsigned32 | read-only | This object indicates the number of radios on which the 2.4G interference ratio fails to meet the compliance standard. Compliance standard: Interference ratio < x (x = 40%). |
| U32 hwWlanRfChannelJamRateNoncompliance5gCnt | 1.3.6.1.4.1.2011.6.139.12.1.4.14 | Unsigned32 | read-only | This object indicates the number of radios on which the 5G interference ratio fails to meet the compliance standard. Compliance standard: Interference ratio < x (x = 40%). |
| I32 hwWlanRfChannelUtilRateComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.4.1 | Integer32 | read-only | This object indicates compliance ratio of the RF channel utilization. Unit: 0.01 Compliance standard: Channel utilization < x (x = 70%). |
| U32 hwWlanRfChannelUtilRateNoncompliance2gCnt | 1.3.6.1.4.1.2011.6.139.12.1.4.8 | Unsigned32 | read-only | This object indicates the number of radios on which the 2.4G channel utilization fails to meet the compliance standard. Compliance standard: Channel utilization < x (x = 70%). |
| U32 hwWlanRfChannelUtilRateNoncompliance5gCnt | 1.3.6.1.4.1.2011.6.139.12.1.4.12 | Unsigned32 | read-only | This object indicates the number of radios on which the 5G channel utilization fails to meet the compliance standard. Compliance standard: Channel utilization < x (x = 70%). |
| I32 hwWlanRfComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.4.6 | Integer32 | read-only | This object indicates the total RF compliance ratio. |
| I32 hwWlanRfDropRateComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.4.5 | Integer32 | read-only | This objects indicates compliance ratio of the RF packet loss rate (PLR). Unit: 0.01 Compliance standard: PLR < x (x = 5%). |
| U32 hwWlanRfLoadNoncompliance2gCnt | 1.3.6.1.4.1.2011.6.139.12.1.4.9 | Unsigned32 | read-only | This object indicates the number of radios on which the 2.4G load fails to meet the compliance standard. Compliance standard: Number of online users < x (x = 40). |
| U32 hwWlanRfLoadNoncompliance5gCnt | 1.3.6.1.4.1.2011.6.139.12.1.4.13 | Unsigned32 | read-only | This object indicates the number of radios on which the 5G load fails to meet the compliance standard. Compliance standard: Number of online users < x (x = 40). |
| I32 hwWlanRfNoiseComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.4.2 | Integer32 | read-only | This object indicates compliance ratio of the RF noise intensity. Unit: 0.01 Compliance standard: Noise intensity < x (x = -80 dBm). |
| U32 hwWlanRfNoiseNoncompliance2gCnt | 1.3.6.1.4.1.2011.6.139.12.1.4.7 | Unsigned32 | read-only | This object indicates the number of radios on which the 2.4G noise intensity fails to meet the compliance standard. Compliance standard: Noise intensity < x (x = -80 dBm). |
| U32 hwWlanRfNoiseNoncompliance5gCnt | 1.3.6.1.4.1.2011.6.139.12.1.4.11 | Unsigned32 | read-only | This object indicates the number of radios on which the 5G noise intensity fails to meet the compliance standard. Compliance standard: Noise intensity < x (x = -80 dBm). |
| I32 hwWlanRfResendRateComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.4.4 | Integer32 | read-only | This objects indicate compliance ratio of the RF retransmission rate (RR). Unit: 0.01 Compliance standard: RR < x (x = 50%). |
| I32 hwWlanServiceNormalAPCount | 1.3.6.1.4.1.2011.6.139.12.1.5.6 | Integer32 | read-only | This object indicates the total of AP in service normal states. |
| MAC hwWlanShareLicAcMac | 1.3.6.1.4.1.2011.6.139.12.3.2.1 | MacAddress | read-only | The mac address of the shared AC |
| NTF hwWlanShareLicAgeRestoreTrap | 1.3.6.1.4.1.2011.6.139.12.3.1.4 | Shared license aging restore. | ||
| NTF hwWlanShareLicAgeTrap | 1.3.6.1.4.1.2011.6.139.12.3.1.3 | Shared license aging. | ||
| I32 hwWlanShareLicNum | 1.3.6.1.4.1.2011.6.139.12.3.2.2 | Integer32 | read-only | The number of shared license. |
| hwWlanSpeedHistoryEntry | 1.3.6.1.4.1.2011.6.139.12.1.7.1 | not-accessible | The index of this table is hwWlanSpeedHistoryTime. | |
| hwWlanSpeedHistoryGroup | 1.3.6.1.4.1.2011.6.139.12.2.2.7 | Description. | ||
| hwWlanSpeedHistoryTable | 1.3.6.1.4.1.2011.6.139.12.1.7 | not-accessible | This table describes the historical effective throughput statistics, which is collected every 1 min. The AC stores data in the latest 15 min. | |
| U32 hwWlanSpeedHistoryTime | 1.3.6.1.4.1.2011.6.139.12.1.7.1.1 | Unsigned32 | not-accessible | This object indicates the statistics collection time. It is the index of the table. |
| I32 hwWlanStaComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.3.5 | Integer32 | read-only | This object indicates the total STA compliance ratio. |
| I32 hwWlanStaCurNum | 1.3.6.1.4.1.2011.6.139.12.3.2.6 | Integer32 | read-only | This object indicates the number of associated stations. |
| I32 hwWlanStaDropRateComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.3.4 | Integer32 | read-only | This object indicates compliance ratio of the STA packet loss rate (PLR). Unit: 0.01 Compliance standard: PLR < x (x = 5%). |
| I32 hwWlanStaMaxNum | 1.3.6.1.4.1.2011.6.139.12.3.2.5 | Integer32 | read-only | This object indicates the maximum specifications of stations. |
| NTF hwWlanStaNumReachMaxRestoreTrap | 1.3.6.1.4.1.2011.6.139.12.3.1.10 | The number of stations is less than the maximum specifications. | ||
| NTF hwWlanStaNumReachMaxTrap | 1.3.6.1.4.1.2011.6.139.12.3.1.9 | The number of stations reaches the maximum specifications. | ||
| NTF hwWlanStaNumReachWarningRestoreTrap | 1.3.6.1.4.1.2011.6.139.12.3.1.8 | The number of stations is less than 80% of the maximum specifications. | ||
| NTF hwWlanStaNumReachWarningTrap | 1.3.6.1.4.1.2011.6.139.12.3.1.7 | The number of stations reaches 80% of the maximum specifications. | ||
| I32 hwWlanStaRateComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.3.1 | Integer32 | read-only | This object indicates compliance ratio of the STA rate. Unit: 0.01 Compliance standard: Rate > x (x = proportion of 12 Mbps STAs to the total number of STAs). |
| I32 hwWlanStaResendRateComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.3.3 | Integer32 | read-only | This object indicates compliance ratio of the STA retransmission rate (RR). Unit: 0.01 Compliance standard: RR < x (x = 50%). |
| I32 hwWlanStaSnrComplianceRate | 1.3.6.1.4.1.2011.6.139.12.1.3.2 | Integer32 | read-only | This object indicates compliance ratio of STA signal-to-noise ratio (SNR). Unit: 0.01 Compliance standard: SNR > x (x = 20 dB). |
| I32 hwWlanUpSpeedHistory | 1.3.6.1.4.1.2011.6.139.12.1.7.1.2 | Integer32 | read-only | This object indicates uplink effective throughput of the AC. Unit: Kbps. |
| OCT hwWlanWapiCertEndTime | 1.3.6.1.4.1.2011.6.139.12.3.2.11 | OCTET STRING | read-only | This object indicates the end time of WAPI certificate validity. |
| OCT hwWlanWapiCertFileName | 1.3.6.1.4.1.2011.6.139.12.3.2.9 | OCTET STRING | read-only | This object indicates the file name of WAPI certificate. |
| NTF hwWlanWapiCertificateInvalidTrap | 1.3.6.1.4.1.2011.6.139.12.3.1.13 | The WAPI certificate is invalid. | ||
| NTF hwWlanWapiCertificateInvalidTrapRestore | 1.3.6.1.4.1.2011.6.139.12.3.1.14 | The alarm of the WAPI certificate out of the invalidity period is cleared. | ||
| NTF hwWlanWapiCertificateNearlyExpiredTrap | 1.3.6.1.4.1.2011.6.139.12.3.1.11 | The WAPI certificate is nearly expired. | ||
| NTF hwWlanWapiCertificateNearlyExpiredTrapRestore | 1.3.6.1.4.1.2011.6.139.12.3.1.12 | The alarm of the WAPI certificate reaching expiration is cleared. | ||
| OCT hwWlanWapiCertStartTime | 1.3.6.1.4.1.2011.6.139.12.3.2.10 | OCTET STRING | read-only | This object indicates the start time of WAPI certificate validity. |
| OCT hwWlanWapiCertType | 1.3.6.1.4.1.2011.6.139.12.3.2.8 | OCTET STRING | read-only | This object indicates the type of WAPI certificate. |
| OCT hwWlanWapiSecurityProfileName | 1.3.6.1.4.1.2011.6.139.12.3.2.7 | OCTET STRING | read-only | This object indicates the name of security profile. |
RFC description
Global WLAN controller management and statistics for Huawei wireless networks.
Start monitoring Huawei WLAN controller (controller-wide AP/station capacity and performance) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.