All MIBs › BSUCLK-MIB › aniBsuClkSntpDstStart
aniBsuClkSntpDstStart
Module: BSUCLK-MIB
OID (symbolic): BSUCLK-MIB::aniBsuClkSntpDstStart
OID (numeric): 1.3.6.1.4.1.4325.3.4.3
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: Used to specify the start of Daylight Saving Time which should be entered in the 'mmddhh' format where m - month, d - day and h - hour. Can and must be set only if aniBsuClkSntpDstEnable is enabled.
What is aniBsuClkSntpDstStart?
Specifies the date and hour when Daylight Saving Time begins, entered in 'mmddhh' format (month, day, hour). This value can only be set when DST is enabled via aniBsuClkSntpDstEnable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4325.3.4.3 snmpwalk -v2c -c public <target> BSUCLK-MIB::aniBsuClkSntpDstStart
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4325.3.4.3.1 snmpget -v2c -c public <target> BSUCLK-MIB::aniBsuClkSntpDstStart.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4325.3.4.3.1 s <value>
Start monitoring Aperto Networks (Ceragon) PacketWave/WiMAX base station units (BSU) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BSUCLK-MIB::aniBsuClkSntpDstStart OID value, configure state conditions and alerts, and monitor any Aperto Networks (Ceragon) PacketWave/WiMAX base station units (BSU) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4325 | ani | ANIROOT-MIB |
| 1.3.6.1.4.1.4325.3 | bsu | ANIROOT-MIB |
| 1.3.6.1.4.1.4325.3.4 | aniBsuClock | ANIROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4325.3.4.3 | aniBsuClkSntpDstStart | BSUCLK-MIB |