BIANCA-BRICK-MSGBOX-MIB

All MIBs › BIANCA-BRICK-MSGBOX-MIB

Category: Device Management, Vendor: bintec

Description: Manages message box and notification settings on bintec elmeg BIANCA/BRICK routers for event and alert delivery.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BIANCA-BRICK-MSGBOX-MIB?

BIANCA-BRICK-MSGBOX-MIB is a legacy BinTec/Bianca-Brick (enterprise OID 272, ISDN router vendor) proprietary MIB configuring the router's built-in fax/voice message-box feature. Its forward table, keyed by extension, records the forwarding address, a delete action, poll delay/password, max retries, and state, while a directory table records message type, content, time, duration, size, and state. As a configuration/status MIB it lets an administrator confirm which extensions have fax-forwarding configured and review stored message metadata on a Bianca-Brick router. It is deployed on legacy BinTec/Bianca-Brick ISDN routers. Engineers can download the BIANCA-BRICK-MSGBOX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BIANCA-BRICK-MSGBOX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy BinTec/Bianca-Brick ISDN routers

Monitoring Examples

An administrator checks msgForwardState and msgDirTable to confirm fax-forwarding configuration and review stored messages on a Bianca-Brick ISDN router.

What Can Be Monitored

message-box forwarding configuration and stored message metadata

Imported Objects

From BIANCA-BRICK-PPP-MIB

BitValue
Date

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
org	1.3
dod	1.3.6
internet	1.3.6.1
private	1.3.6.1.4
enterprises	1.3.6.1.4.1
bintec	1.3.6.1.4.1.272
bibo	1.3.6.1.4.1.272.4
isdn	1.3.6.1.4.1.272.4.2
msgForwardTable	1.3.6.1.4.1.272.4.2.13		not-accessible	The msgForwardTable contains information about the behavior of the message box. You can configure which extensions are used to accept fax calls and how these faxes should be forwarded to the receiver. Deleting entries: An entry can be removed by assigning the value `delete' to its msgForwardPoll object.
msgForwardEntry	1.3.6.1.4.1.272.4.2.13.1		not-accessible
STR msgForwardExtension	1.3.6.1.4.1.272.4.2.13.1.1	DisplayString	read-write	The extension of the incoming calls that is accepted by the message box. For this extension you also have to set the pabxExtDestination field in the pabxExtensionTable to `msg_box'.
STR msgForwardAddr	1.3.6.1.4.1.272.4.2.13.1.2	DisplayString	read-write	The Called Party Number that is used to send stored faxes. If this field is empty, stored faxes are not sent automatically to another number.
INT msgForwardDeleteAction	1.3.6.1.4.1.272.4.2.13.1.3	INTEGER	read-write	This field defines when a fax message, that was sent successfully, should be deleted. When set to `delivered' the fax will be deleted after it is sent anyway. When set to `forwarded' it will be deleted immediately after it was sent successfully to the number specified in the msgForwardAddr field. When set to `polled', the fax is deleted after someone received the fax via fax polling.
INT msgForwardDelay	1.3.6.1.4.1.272.4.2.13.1.4	INTEGER	read-write	The time in seconds to wait before the message box tries or retries to send a stored fax to the msgForwardAddr.
INT msgForwardPoll	1.3.6.1.4.1.272.4.2.13.1.5	INTEGER	read-write	To allow polling stored fax messages this value must be set to `enable'. When set to `disable' fax polling is not allowed. When set to delete, the table-entry will be deleted.
STR msgForwardPollPassword	1.3.6.1.4.1.272.4.2.13.1.6	DisplayString	read-write	The password you have to use if you like to poll a stored fax.
INT msgForwardMaxRetries	1.3.6.1.4.1.272.4.2.13.1.7	INTEGER	read-write	Number of trials to forward a fax message to an external fax station before the msgForwardState changes to the value `blocked'. A trial counts only when a connection could be established. When this field is set to zero, the state never changes to `blocked'.
INT msgForwardState	1.3.6.1.4.1.272.4.2.13.1.8	INTEGER	read-write	Faxes are only forwarded to msgForwardAddr if the msgForwardState has the value `enabled'. The msgForwardState is set automatically to `blocked' when the number of retries reaches msgForwardMaxRetries.
msgDirTable	1.3.6.1.4.1.272.4.2.14		not-accessible	The msgDirTable contains information for all FAX messages that are currently stored in the flash ROM. Deleting entries: An entry can be removed by assigning the value `delete' to its msgDirState object.
msgDirEntry	1.3.6.1.4.1.272.4.2.14.1		not-accessible
STR msgDirExtension	1.3.6.1.4.1.272.4.2.14.1.1	DisplayString	read-only	The called number when the fax was received.
INT msgDirType	1.3.6.1.4.1.272.4.2.14.1.2	INTEGER	read-only	The msgDirType specifies which kind of data belongs to this msgDirTable entry
STR msgDirContent	1.3.6.1.4.1.272.4.2.14.1.3	DisplayString	read-only	The msgDirContent is a unique string to identify the msgDirTable entry. It contains the data type, a unique number and the number of the remote fax station
DAT msgDirTime	1.3.6.1.4.1.272.4.2.14.1.4	Date	read-only	The msgDirTime contains the date and time when the fax was received.
INT msgDirDuration	1.3.6.1.4.1.272.4.2.14.1.5	INTEGER	read-only	The msgDirDuration contains for fax messages the number of stored pages.
INT msgDirSize	1.3.6.1.4.1.272.4.2.14.1.6	INTEGER	read-only	The msgDirSize contains the number Bytes that are used to store this message in the flash ROM.
INT msgDirState	1.3.6.1.4.1.272.4.2.14.1.7	INTEGER	read-write	The state of the message. To delete a message, assign the value `delete' to this object, then the msgDirState will change to `deleted' and the memory that is used by this message will be available again after the next automatic reorganisation of the flash ROM.

RFC description

Vendor-private MIB for Bianca Brick messaging/voicemail systems; manages message box resources and call handling.

Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BIANCA-BRICK-MSGBOX-MIB

What Is BIANCA-BRICK-MSGBOX-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description