-- This file is corresponding to Release 6.1.2.100 from 2001/09/26 00:00:00 -- (C)opyright 1991-1999 BinTec Communications AG, All Rights Reserved -- $RCSfile: mibmsgbox,v $ -- $Revision: 1.7 $ BIANCA-BRICK-MSGBOX-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString FROM SNMPv2-TC Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 BitValue, Date FROM BIANCA-BRICK-PPP-MIB; org OBJECT IDENTIFIER ::= { iso 3 } dod OBJECT IDENTIFIER ::= { org 6 } internet OBJECT IDENTIFIER ::= { dod 1 } private OBJECT IDENTIFIER ::= { internet 4 } enterprises OBJECT IDENTIFIER ::= { private 1 } bintec OBJECT IDENTIFIER ::= { enterprises 272 } bibo OBJECT IDENTIFIER ::= { bintec 4 } isdn OBJECT IDENTIFIER ::= { bibo 2 } HexValue ::= INTEGER msgForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF MsgForwardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The msgForwardTable contains information about the behavior of the message box. You can configure which extensions are used to accept fax calls and how these faxes should be forwarded to the receiver. Deleting entries: An entry can be removed by assigning the value `delete' to its msgForwardPoll object." ::= { isdn 13 } msgForwardEntry OBJECT-TYPE SYNTAX MsgForwardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { msgForwardExtension } ::= { msgForwardTable 1 } MsgForwardEntry ::= SEQUENCE { msgForwardExtension DisplayString, msgForwardAddr DisplayString, msgForwardDeleteAction INTEGER, msgForwardDelay INTEGER, msgForwardPoll INTEGER, msgForwardPollPassword DisplayString, msgForwardMaxRetries INTEGER, msgForwardState INTEGER } msgForwardExtension OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The extension of the incoming calls that is accepted by the message box. For this extension you also have to set the pabxExtDestination field in the pabxExtensionTable to `msg_box'." ::= { msgForwardEntry 1 } msgForwardAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The Called Party Number that is used to send stored faxes. If this field is empty, stored faxes are not sent automatically to another number." ::= { msgForwardEntry 2 } msgForwardDeleteAction OBJECT-TYPE SYNTAX INTEGER { delivered(1), forwarded(2), polled(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This field defines when a fax message, that was sent successfully, should be deleted. When set to `delivered' the fax will be deleted after it is sent anyway. When set to `forwarded' it will be deleted immediately after it was sent successfully to the number specified in the msgForwardAddr field. When set to `polled', the fax is deleted after someone received the fax via fax polling." ::= { msgForwardEntry 3 } msgForwardDelay OBJECT-TYPE SYNTAX INTEGER ( 1..1209600 ) ACCESS read-write STATUS mandatory DESCRIPTION "The time in seconds to wait before the message box tries or retries to send a stored fax to the msgForwardAddr." ::= { msgForwardEntry 4 } msgForwardPoll OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), delete(3) } ACCESS read-write STATUS mandatory DESCRIPTION "To allow polling stored fax messages this value must be set to `enable'. When set to `disable' fax polling is not allowed. When set to delete, the table-entry will be deleted." ::= { msgForwardEntry 5 } msgForwardPollPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The password you have to use if you like to poll a stored fax." ::= { msgForwardEntry 6 } msgForwardMaxRetries OBJECT-TYPE SYNTAX INTEGER ( 0..1000 ) ACCESS read-write STATUS mandatory DESCRIPTION "Number of trials to forward a fax message to an external fax station before the msgForwardState changes to the value `blocked'. A trial counts only when a connection could be established. When this field is set to zero, the state never changes to `blocked'." ::= { msgForwardEntry 7 } msgForwardState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), blocked(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Faxes are only forwarded to msgForwardAddr if the msgForwardState has the value `enabled'. The msgForwardState is set automatically to `blocked' when the number of retries reaches msgForwardMaxRetries." ::= { msgForwardEntry 8 } msgDirTable OBJECT-TYPE SYNTAX SEQUENCE OF MsgDirEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The msgDirTable contains information for all FAX messages that are currently stored in the flash ROM. Deleting entries: An entry can be removed by assigning the value `delete' to its msgDirState object." ::= { isdn 14 } msgDirEntry OBJECT-TYPE SYNTAX MsgDirEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { msgDirExtension } ::= { msgDirTable 1 } MsgDirEntry ::= SEQUENCE { msgDirExtension DisplayString, msgDirType INTEGER, msgDirContent DisplayString, msgDirTime Date, msgDirDuration INTEGER, msgDirSize INTEGER, msgDirState INTEGER } msgDirExtension OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The called number when the fax was received." ::= { msgDirEntry 1 } msgDirType OBJECT-TYPE SYNTAX INTEGER { none(1), fax(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The msgDirType specifies which kind of data belongs to this msgDirTable entry" ::= { msgDirEntry 2 } msgDirContent OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The msgDirContent is a unique string to identify the msgDirTable entry. It contains the data type, a unique number and the number of the remote fax station" ::= { msgDirEntry 3 } msgDirTime OBJECT-TYPE SYNTAX Date ACCESS read-only STATUS mandatory DESCRIPTION "The msgDirTime contains the date and time when the fax was received." ::= { msgDirEntry 4 } msgDirDuration OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The msgDirDuration contains for fax messages the number of stored pages." ::= { msgDirEntry 5 } msgDirSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The msgDirSize contains the number Bytes that are used to store this message in the flash ROM." ::= { msgDirEntry 6 } msgDirState OBJECT-TYPE SYNTAX INTEGER { receiving(1), received(2), sent(3), deleted(4), delete(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of the message. To delete a message, assign the value `delete' to this object, then the msgDirState will change to `deleted' and the memory that is used by this message will be available again after the next automatic reorganisation of the flash ROM." ::= { msgDirEntry 7 } END -- of BIANCA-BRICK definitions