| OID symbolic | OID numeric | Type | Access | Description |
|---|
| avayaWlanMobSwitchNotificationsMib | 1.3.6.1.4.1.45.7.19 | | | AVAYA WLAN Mobility Switch Notifications MIB
Copyright 2011 Avaya, Inc.
All rights reserved.
This Avaya SNMP Management Information Base Specification
(Specification) embodies Avaya's confidential and proprietary
intellectual property. Avaya retains all title and ownership
in the Specification, including any revisions.
This Specification is supplied 'AS IS,' and Avaya makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification. |
| avWlanMobSwNotifications | 1.3.6.1.4.1.45.7.19.0 | | | |
| avWlanSwitchNotifications | 1.3.6.1.4.1.45.7.19.0.1 | | | |
| NTF avWlanSwitchMCPConnectionEstablished | 1.3.6.1.4.1.45.7.19.0.1.1 | | | A avWlanSwitchMCPConnectionEstablished trap signifies that the SNMP entity,
acting in an agent role, MCP client successfully established
connection with the MCP server in Wireless Controller.
The Trap is Enabled by default. |
| NTF avWlanSwitchMCPLostConnection | 1.3.6.1.4.1.45.7.19.0.1.2 | | | A avWlanSwitchMCPLostConnection trap signifies that the SNMP entity,
acting in an agent role, MCP client lost connection with the MCP server
in Wireless Controller.
The Trap is Enabled by default. |
| NTF avWlanSwitchMVTDownload | 1.3.6.1.4.1.45.7.19.0.1.3 | | | A avWlanSwitchMVTDownload trap signifies that the SNMP entity,
acting in an agent role, has received Mobility Vlan Table download
from the Mobility controller. Mobility Switch receives MVT when it
registers with the Mobility Controller. Controller address and number
of entries in the table is passed as parameter.
The Trap is Enabled by default. |
| NTF avWlanSwitchMSTDownload | 1.3.6.1.4.1.45.7.19.0.1.4 | | | A avWlanSwitchMSTDownload trap signifies that the SNMP entity,
acting in an agent role, has received Mobility Switch Table download
from the Mobility Controller. Mobility Switch receives MST when it
registers with the Mobility controller. Controller address and number
of entries in the table is passed as parameter.
The Trap is Enabled by default. |
| NTF avWlanSwitchPeerDeviceConnectionEstablished | 1.3.6.1.4.1.45.7.19.0.1.5 | | | A avWlanSwitchPeerDeviceConnectionEstablished trap signifies that the SNMP entity,
acting in an agent role, has established connection to the peer device.
Peer switch IP, MAC address and device type is passed as parameter.
The Trap is Enabled by default. |
| NTF avWlanSwitchPeerDeviceLostConnection | 1.3.6.1.4.1.45.7.19.0.1.6 | | | A avWlanSwitchPeerDeviceLostConnection trap signifies that the SNMP entity,
acting in an agent role, has lost connection to the peer device.
Peer switch IP, MAC, device type and failure reason are passed as parameter.
The Trap is Enabled by default. |
| NTF avWlanSwitchVlanServerElected | 1.3.6.1.4.1.45.7.19.0.1.7 | | | A avWlanSwitchVlanServerElected trap signifies that the SNMP entity,
acting in an agent role, has elected vlan server for a mobility vlan.
Mobility vlan name, vlan server IP and MAC address is passed as parameter.
The Trap is Disabled by default. |
| NTF avWlanSwitchLostConnectionToVlanServer | 1.3.6.1.4.1.45.7.19.0.1.8 | | | A avWlanSwitchLostConnectionToVlanServer trap signifies that the SNMP entity,
acting in an agent role, has lost connection to vlan server and there are no
other alternative vlan servers for the mobility vlan.
Mobility vlan name, vlan server IP and MAC address is passed as parameter.
The trap is Enabled by default. |
| NTF avWlanSwitchVlanGenNumberMismatch | 1.3.6.1.4.1.45.7.19.0.1.9 | | | A avWlanSwitchVlanGenNumberMismatch trap signifies that the SNMP entity,
acting in an agent role, has detected change in the generation number.
Mobility switches advertise the generation numbers for the mapped
mobility vlans in the mobility domain. Generation numbers are used to
detect stale mobility vlans. The mobility vlan name, mobility switch
generation number and the peer switch generation number is passed as parameter.
This is enabled by default. |
| NTF avWlanSwitchVlanRoleChanged | 1.3.6.1.4.1.45.7.19.0.1.10 | | | A avWlanSwitchVlanRoleChanged trap signifies that the SNMP entity,
acting in an agent role, has changed the role of the mobility vlan.
Mobility vlan name, old and new role, reason for the role change
is passed as parameter.
The trap is Disabled by default. |
| NTF avWlanSwitchVlanMapStateChanged | 1.3.6.1.4.1.45.7.19.0.1.11 | | | A avWlanSwitchVlanMapStateChanged trap signifies that the SNMP entity,
acting in an agent role, has changed the state of the mobility vlan map.
A vlan map is the association between mobility vlan name and the local
static vlan. The state is Active as long as Mobility vlan name and the
local static vlan are active.
Deletion of mobility vlan or the local static vlan results in a
InActive state for a vlan map. Vlan map will become Active if the
mobility vlan is created before the next MVT download. Mobility vlan name,
old, new state and the reason is passed as parameter.
The trap is Disabled by default. |
| NTF avWlanSwitchVlanMapRemoved | 1.3.6.1.4.1.45.7.19.0.1.12 | | | A avWlanSwitchVlanMapRemoved trap signifies that the SNMP entity,
acting in an agent role, has deleted the mobility vlan map.
InActive maps are deleted when the mobility vlan is not present in
the MVT download. Active maps are deleted either from the config or
when the lvid to which mobility vlan is mapped is deleted. Mobility
vlan name, vlan state and reason for removal is passed as parameter.
The trap is Enabled by default. |
| NTF avWlanSwitchVlanTrackAffected | 1.3.6.1.4.1.45.7.19.0.1.13 | | | A avWlanSwitchVlanTrackAffected trap signifies that the SNMP entity,
acting in an agent role, has detected a mobility vlan in server role has no ports
active in its track list. Mobility vlan name is passed as parameter.
The trap is Disabled by default. |
| NTF avWlanSwitchIgmpSnoopingEnabled | 1.3.6.1.4.1.45.7.19.0.1.14 | | | A avWlanSwitchIgmpSnoopingEnabled trap signifies that the SNMP entity,
acting in an agent role, has successfully enabled IGMP snooping on a mobility vlan.
local vlan identifier which is mapped to mobility vlan is passed as parameter.
The trap is Disabled by default. |
| NTF avWlanSwitchIgmpSnoopingDisabled | 1.3.6.1.4.1.45.7.19.0.1.15 | | | A avWlanSwitchIgmpSnoopingDisabled trap signifies that the SNMP entity,
acting in an agent role, has successfully disabled IGMP snooping
on a mobility vlan. Mobility vlan name is passed as parameter. The trap is
Disabled by default. |
| NTF avWlanSwitchIgmpControlFrameReceived | 1.3.6.1.4.1.45.7.19.0.1.16 | | | A avWlanSwitchIgmpControlFrameReceived trap signifies that the SNMP entity,
acting in an agent role, has snooped IGMP control frame on a mobility vlan.
Mobility vlan name, Frame Type, device type and IGMP source IP
are passed as parameters. The trap is Disabled by default. |
| NTF avWlanSwitchLimitsReached | 1.3.6.1.4.1.45.7.19.0.1.17 | | | This trap signifies that the SNMP entity, acting in an agent role,
has detected some switch limits being reached.
The bit mask avWlanSwitchNotifAuxLimitsReached is send in the trap
to indicate the parameter for which limits are reached.
This trap is enabled by default. |
| avWlanMobSwNotificationObjects | 1.3.6.1.4.1.45.7.19.1 | | | |
| avWlanMobSwNotificationAuxObjects | 1.3.6.1.4.1.45.7.19.1.1 | | | |
| IPt avWlanNotifAuxMobilityControllerInetAddressType | 1.3.6.1.4.1.45.7.19.1.1.1 | InetAddressType | accessible-for-notify | The type of address contained in a corresponding instance of
avWlanNotifAuxMobilityControllerInetAddress. |
| IP avWlanNotifAuxMobilityControllerInetAddress | 1.3.6.1.4.1.45.7.19.1.1.2 | InetAddress | accessible-for-notify | This object identifies a controller network address. |
| U32 avWlanNotifAuxNumberOfVlanEntries | 1.3.6.1.4.1.45.7.19.1.1.3 | Unsigned32 | accessible-for-notify | This object identifies the number of Mobility VLAN entries
that were successfully downloaded by the WSP. |
| U32 avWlanNotifAuxMSTDownloadEntries | 1.3.6.1.4.1.45.7.19.1.1.4 | Unsigned32 | accessible-for-notify | This object identifies the number of Mobility switches
that were successfully downloaded by the WSP. |
| IPt avWlanNotifAuxPeerDeviceInetAddressType | 1.3.6.1.4.1.45.7.19.1.1.5 | InetAddressType | accessible-for-notify | The type of address contained in a corresponding instance of
avWlanNotifAuxPeerDeviceInetAddress. |
| IP avWlanNotifAuxPeerDeviceInetAddress | 1.3.6.1.4.1.45.7.19.1.1.6 | InetAddress | accessible-for-notify | This object identifies the IP address of any peer device connected
to the WSP. |
| MAC avWlanNotifAuxPeerDeviceAddress | 1.3.6.1.4.1.45.7.19.1.1.7 | MacAddress | accessible-for-notify | This object specifies the MAC address of the peer device. |
| INT avWlanNotifAuxPeerDeviceType | 1.3.6.1.4.1.45.7.19.1.1.8 | INTEGER | accessible-for-notify | This object specifies the peer device type. |
| INT avWlanNotifAuxConnectionFailureReason | 1.3.6.1.4.1.45.7.19.1.1.9 | INTEGER | accessible-for-notify | This object indicate the reason for connection failure with
the peer device. The peer device is either a Access Point or
Wireless Switching Point. The supported values are:
kaLoss - loss of keep alive packets between the peers.
controlPlane - connection closed by the controller
peerReset - peer device closed the connection |
| STR avWlanNotifAuxMobilityVlanName | 1.3.6.1.4.1.45.7.19.1.1.10 | SnmpAdminString | accessible-for-notify | This object specifies the name of the mobility VLAN. |
| IPt avWlanNotifAuxVlanServerInetAddressType | 1.3.6.1.4.1.45.7.19.1.1.11 | InetAddressType | accessible-for-notify | The type of address contained in a corresponding instance of
avWlanNotifAuxVlanServerInetAddress. |
| IP avWlanNotifAuxVlanServerInetAddress | 1.3.6.1.4.1.45.7.19.1.1.12 | InetAddress | accessible-for-notify | This object identifies the IP address of VLAN server. |
| MAC avWlanNotifAuxVlanServerAddress | 1.3.6.1.4.1.45.7.19.1.1.13 | MacAddress | accessible-for-notify | This object specifies the MAC address of the VLAN server. |
| U32 avWlanNotifAuxMobilityVlanSelfGenerationNumber | 1.3.6.1.4.1.45.7.19.1.1.14 | Unsigned32 | accessible-for-notify | This object identifies the self generation number associated with
the mobility VLAN in the WSP device. This number will be
received by the WSP during a MVT download. |
| U32 avWlanNotifAuxMobilityVlanPeerGenerationNumber | 1.3.6.1.4.1.45.7.19.1.1.15 | Unsigned32 | accessible-for-notify | This object identifies the peer generation number for each
mobility VLAN received from the WSP (during VLAN advertisements). |
| AVW avWlanNotifAuxOldVlanRole | 1.3.6.1.4.1.45.7.19.1.1.16 | AvWlanMobVlanRole | accessible-for-notify | This object specifies the old role of the mobility VLAN. |
| AVW avWlanNotifAuxNewVlanRole | 1.3.6.1.4.1.45.7.19.1.1.17 | AvWlanMobVlanRole | accessible-for-notify | This object specifies the new role of the mobility VLAN. |
| INT avWlanNotifAuxRoleChangeReason | 1.3.6.1.4.1.45.7.19.1.1.18 | INTEGER | accessible-for-notify | This object specifies the reason for change in mobility VLAN role
by this WSP. The following values are supported:
administrator - role change due to admin configuration
clientRoam - role change due to client roaming. |
| AVW avWlanNotifAuxOldState | 1.3.6.1.4.1.45.7.19.1.1.19 | AvWlanMobVlanState | accessible-for-notify | This object specifies the old state of the mobility vlan MAP. |
| AVW avWlanNotifAuxNewState | 1.3.6.1.4.1.45.7.19.1.1.20 | AvWlanMobVlanState | accessible-for-notify | This object specifies the new state of the mobility vlan MAP. |
| INT avWlanNotifAuxStateChangeReason | 1.3.6.1.4.1.45.7.19.1.1.21 | INTEGER | accessible-for-notify | This object specifies the reason for change in mobility VLAN
state in this WSP device. The following values are supported:
mobVlanDeleted - state change due to deletion of mobility VLAN
mobVlanCreated - state change due to creation of mobility VLAN
localVlanDeleted - state change due to deletion of local VLAN |
| AVW avWlanNotifAuxVlanState | 1.3.6.1.4.1.45.7.19.1.1.22 | AvWlanMobVlanState | accessible-for-notify | This object specifies the current state of the mobility VLAN. |
| INT avWlanNotifAuxRemoveReason | 1.3.6.1.4.1.45.7.19.1.1.23 | INTEGER | accessible-for-notify | This object specifies the reason for removal of mobility VLAN
in this WSP. The following values are supported:
administrator - removed due to admin configuration
clientRoam - removed due to deletion of lvid. |
| INT avWlanNotifAuxControlFrameType | 1.3.6.1.4.1.45.7.19.1.1.24 | INTEGER | accessible-for-notify | This object specifies the IGMP control frame type. |
| IPt avWlanNotifAuxInetAddressType | 1.3.6.1.4.1.45.7.19.1.1.25 | InetAddressType | accessible-for-notify | The type of address contained in a corresponding instance of
avWlanNotifAuxInetAddress. |
| IP avWlanNotifAuxInetAddress | 1.3.6.1.4.1.45.7.19.1.1.26 | InetAddress | accessible-for-notify | This object identifies the source IP in the IGMP control frame. |
| AVW avWlanSwitchNotifAuxAuxLimitsReached | 1.3.6.1.4.1.45.7.19.1.1.27 | AvWlanSwitchNotifAuxLimitsMap | accessible-for-notify | This objects is included in the avWlanSwitchLimitsReached notification to
indicate which limits have been reached. |
