| OID symbolic | OID numeric | Type | Access | Description |
|---|
| avayaSaaTrackMib | 1.3.6.1.4.1.6889.2.6.2 | | | The MIB module for configuring SAA and Object Tracking
functionality in Avaya converged Gateways. |
| avstrMIBObjects | 1.3.6.1.4.1.6889.2.6.2.1 | | | |
| avstrRtrMIBObjects | 1.3.6.1.4.1.6889.2.6.2.1.1 | | | |
| avstrRtrTable | 1.3.6.1.4.1.6889.2.6.2.1.1.1 | | not-accessible | This table contains all the rtr's configured on the device. |
| avstrRtrEntry | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1 | | not-accessible | A specific entry. |
| U32 avstrRtrId | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.1 | Unsigned32 | not-accessible | The ID of the RTR.
This is also the index component of this table. |
| INT avstrRtrType | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.2 | INTEGER | read-write | The type of test this rtr object maintains. |
| IP avstrRtrDestIp | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.3 | IpAddress | read-write | The destination IP address of SAA probes generated by this
entry. |
| INT avstrRtrDestPort | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.4 | INTEGER | read-write | The destination port of SAA probes generated by this entry.
This object is meaningfull only when avstrRtrType is set to
tcpConnect(3). |
| U32 avstrRtrFrequencyMs | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.5 | Unsigned32 | read-write | The frequency, in milliseconds, between one SAA probe
and the next. |
| U32 avstrRtrWaitIntervalMs | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.6 | Unsigned32 | read-write | The interval, in milliseconds, from the time an SAA probe
is sent until the device waits for a reply for that SAA
probe. |
| U32 avstrRtrFailRetries | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.7 | Unsigned32 | read-write | When the current state of this entry is 'up', the value
of this object determines the number of successive
failed probes after which the state of this entry moves
to 'down'. |
| U32 avstrRtrSuccessRetries | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.8 | Unsigned32 | read-write | When the current state of this entry is 'down', the value
of this object determines the number of successive
successful probes after which the state of this entry
moves to 'up'. |
| U32 avstrRtrProbeDscp | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.9 | Unsigned32 | read-write | The DSCP value of SAA probes generated by this entry. |
| IP avstrRtrProbeSrcIpAddr | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.10 | IpAddress | read-write | The source IP address of SAA probes sent by this entry.
The value 0.0.0.0 means that this address shall be
taken from the probe's egress interface's address. |
| NUM avstrRtrProbeNextHopIf | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.11 | InterfaceIndex | read-write | This node is valid only if avstrRtrProbeNextHopIp
is set to '0.0.0.0'.
The interface on which SAA probes generated by this
entry shall exit, bypassing normal routing.
A value of '0' means the probes will undergo
routing normally.
NOTES:
1. In order to set this object, you must first move
avstrRtrRowStatus to notInService. When finished
setting this object and avstrRtrProbeNextHopMac -
move it back to active.
2. When setting this object to an Ethernet type
interface which does not employ DHCP client, you must
also specify the next-hop MAC address by setting
avstrRtrProbeNextHopMac.
When a DHCP client is used, if the MAC address is not
specified, the default Gateway received from the DHCP
server shall be used as the next hop. |
| MAC avstrRtrProbeNextHopMac | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.12 | MacAddress | read-write | Use this object in conjunction with
avstrRtrProbeNextHopIf to manually set the next-hop
of SAA probes generated by this entry.
This object is meaningfull only when the value of
avstrRtrProbeNextHopIf is valid and set to an
Ethernet type interface.
NOTE:
In order to set this object, you must first move
avstrRtrRowStatus to notInService. When finished
setting this object and avstrRtrProbeNextHopIf -
move it back to active. |
| INT avstrRtrSchedule | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.13 | INTEGER | read-write | This object specifies the scheduling status of this row.
inactive(1) - This entry is currently not scheduled to run.
active(2) - This entry is currently running. |
| INT avstrRtrOperState | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.14 | INTEGER | read-only | The conceptual operational state of this entry:
inactive(1) - the entry is not operating yet.
up(2) - the entry is up. This is also the initial state of the
entry when it starts operating (i.e. moves out of
the 'inactive' state).
down(3) - the entry is down.
NOTE: Refer to avstrRtrFailRetries and avstrRtrSuccessRetries
to understand how the entry transitions between 'up' and
'down' states. |
| TIK avstrRtrOperStateLastChange | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.15 | TimeTicks | read-only | sysUpTime when the last change in avstrRtrOperState
occured, in hundredths of a second. |
| ROW avstrRtrRowStatus | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.16 | RowStatus | read-write | This object indicates the conceptual status of this row.
The value of this object has no effect on whether other
objects in this conceptual row can be modified.
If active, this object must remain active if it is referenced
by a row in another table.
Use createAndWait (not createAndGo) to create this row.
In order for this row to be active(1) avstrRtrType and
(avstrRtrDestIp or avstrRtrDestHostName) must be set to a
valid value. |
| IP avstrRtrProbeNextHopIp | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.17 | IpAddress | read-write | The IP address of the next-hop to which SAA probes
generated by this entry shall be routed, bypassing
normal routing.
A value of '0.0.0.0' means that the value in
avstrRtrProbeNextHopIf is valid instead.
Note:
Setting this node to '0.0.0.0' and
avstrRtrProbeNextHopIf to '0' will result in the
probes undergoing routing normally. |
| T/F avstrRtrIfKpaliveBypass | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.18 | TruthValue | read-write | This node controls whether or not SAA probes
generated by this rtr will undergo normal path
internally (False), in the Gateway's network stack,
or will undergo a special bypass path (True) that is
required when this rtr is used in conjunction with
the interface keepalive feature.
NOTE:
This node is valid only if avstrRtrProbeNextHopIf
is valid and set to a value != '0'. |
| STR avstrRtrDestHostName | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.19 | DisplayString | read-write | The hostname shall follow RFC 1035 Host name convention.
Note that while upper and lower case letters are allowed in domain
names, no significance is attached to the case. That is, two names with
the same spelling but different case are to be treated as if identical.
The labels must start with a letter or digit, end with a letter or digit, and have as interior
characters only letters, digits, and hyphen. There are also some
restrictions on the length. Labels must be 63 characters or less.
There are up to 4 labels per hostname. |
| IP avstrRtrResolvedIp | 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.20 | IpAddress | read-only | The Resolved destination IP address of SAA probes generated by this
entry.
The value 0.0.0.0 will be presented if avstrRtrDestHostName is not
configured or if avstrRtrDestHostName is not resolved. |
| avstrTrackerMIBObjects | 1.3.6.1.4.1.6889.2.6.2.1.2 | | | |
| avstrTrackerTable | 1.3.6.1.4.1.6889.2.6.2.1.2.1 | | not-accessible | This table contains all the object-trackers configured on
the device. |
| avstrTrackerEntry | 1.3.6.1.4.1.6889.2.6.2.1.2.1.1 | | not-accessible | A specific entry. |
| U32 avstrTrackerId | 1.3.6.1.4.1.6889.2.6.2.1.2.1.1.1 | Unsigned32 | not-accessible | The ID of the object-tracker object.
This is also the index component of this table. |
| STR avstrTrackerDescription | 1.3.6.1.4.1.6889.2.6.2.1.2.1.1.2 | DisplayString | read-write | Free text describing this row. |
| INT avstrTrackerType | 1.3.6.1.4.1.6889.2.6.2.1.2.1.1.3 | INTEGER | read-write | The type of object to be tracked by this object-tracker.
The value list(1) is reserved for specifying an entry
that tracks a list of object-trackers. |
| U32 avstrTrackerRtrId | 1.3.6.1.4.1.6889.2.6.2.1.2.1.1.4 | Unsigned32 | read-write | This object has a meaning only when avstrTrackerType is set to
rtr(2).
The avstrRtrId of the tracked rtr. |
| INT avstrTrackerListType | 1.3.6.1.4.1.6889.2.6.2.1.2.1.1.5 | INTEGER | read-write | This object has a meaning only when avstrTrackerType is set to
list(1).
The value of this object determines how the states of the
object-trackers in the tracked list are analyzed in order
to determine the state of this object-tracker entry.
Possible values are:
boolAnd(1) - The entry is 'up' if all object-trackers are 'up',
or 'down' if one or more object-trackers are
'down'.
boolOr(2) - The entry is 'up' if at least one object-tracker
in the list is 'up'.
threshCount(3) - When the entry is in the 'down' state it
switches to the 'up' state if the number of
'up' object-trackers is greater or equal then
the number specified in
avstrTrackerThresholdUp.
When the entry is in the 'up' state it
switches to the 'down' state if the number of
'up' objects is less then or equal to the
number specified in avstrTrackerThresholdDown. |
| U32 avstrTrackerListThresholdUp | 1.3.6.1.4.1.6889.2.6.2.1.2.1.1.6 | Unsigned32 | read-write | This object has a meaning only when avstrTrackerType is set to
list(1), and avstrTrackerListType is set to threshXxx.
When the current state of this entry is 'down', the value
of this object determines the number of 'up' object-trackers
in the list that will cause a transition of this entry to
the 'up' state. |
| U32 avstrTrackerListThresholdDown | 1.3.6.1.4.1.6889.2.6.2.1.2.1.1.7 | Unsigned32 | read-write | This object has a meaning only when avstrTrackType is set to
list(1), and avstrTrackListType is set to threshXxx.
When the current state of this entry is 'up', the value
of this object determines the number of 'down' object-trackers
in the list that will cause a transition of this entry to the
'down' state. |
| INT avstrTrackerOperState | 1.3.6.1.4.1.6889.2.6.2.1.2.1.1.8 | INTEGER | read-only | The conceptual operational state of this entry:
reserved(1) - this value is currently reserved.
up(2) - the monitored object is 'up'.
down(3) - the monitored object is 'down' or 'inactive'.
NOTE: Refer to avstrTrackerListType, avstrTrackerThresholdUp
and avstrTrackerThresholdDown to understand how the entry
transitions between 'up' and 'down' states. |
| TIK avstrTrackerOperStateLastChange | 1.3.6.1.4.1.6889.2.6.2.1.2.1.1.9 | TimeTicks | read-only | sysUpTime when the last change in avstrTrackerOperState
occured, in hundredths of a second. |
| ROW avstrTrackerRowStatus | 1.3.6.1.4.1.6889.2.6.2.1.2.1.1.10 | RowStatus | read-write | This object indicates the conceptual status of this row.
The value of this object has no effect on whether other
objects in this conceptual row can be modified.
If active, this object must remain active if it is referenced
by a row in another table.
Use createAndWait (not createAndGo) to create this row.
In order for this row to be active(1) either the following
must hold:
o Set avstrTrackerType to list(1).
o Set avstrTrackerType to rtr(2), and set avstrTrackerRtrId
to an avstrRtrId of an active(1) rtr entry. |
| T/F avstrTrackerPermanentTrackState | 1.3.6.1.4.1.6889.2.6.2.1.2.1.1.11 | TruthValue | read-write | Enable/Disable for storing the track state or not in permanent
memory to be available after reboot.
The default mode is of not keeping the track state after reboot
and therefore starting as track is down. |
| avstrTrackerListObjsTable | 1.3.6.1.4.1.6889.2.6.2.1.2.2 | | not-accessible | This table contains the associations between object-tracker
lists and the object-tracker objects they contain. |
| avstrTrackerListObjsEntry | 1.3.6.1.4.1.6889.2.6.2.1.2.2.1 | | not-accessible | A specific entry. |
| U32 avstrTrackerListObjsParentTrackId | 1.3.6.1.4.1.6889.2.6.2.1.2.2.1.1 | Unsigned32 | not-accessible | The avstrTrackerId of the object-tracker list object. |
| U32 avstrTrackerListObjsChildTrackId | 1.3.6.1.4.1.6889.2.6.2.1.2.2.1.2 | Unsigned32 | not-accessible | The avstrTrackerId of the object-tracker that is part of the
tracked list. |
| ROW avstrTrackerListObjsRowStatus | 1.3.6.1.4.1.6889.2.6.2.1.2.2.1.3 | RowStatus | read-write | This object indicates the conceptual status of this row.
The value of this object has no effect on whether other
objects in this conceptual row can be modified.
If active, this object must remain active if it is referenced
by a row in another table.
Use createAndGo (not createAndWait) to create this row. |
| T/F avstrTrackerListObjsReverseState | 1.3.6.1.4.1.6889.2.6.2.1.2.2.1.4 | TruthValue | read-write | This object determines whether the state of object being
tracked is reversed or not. When a state is reversed 'up' is
considered as 'down', and vice-versa.
The default value is 'false', which means the state is not
reversed. |
| avstrTrackerPtrsTable | 1.3.6.1.4.1.6889.2.6.2.1.2.3 | | not-accessible | This table is an informational read-only table that contains
a list of all the objects that are currently pointing to each
object-tracker in the system.
This table is provided for convenience only. An alternative
equivalent method is to walk over all the variuos ojects in
the system that may point to object-trackers. |
| avstrTrackerPtrsEntry | 1.3.6.1.4.1.6889.2.6.2.1.2.3.1 | | not-accessible | A specific entry. |
| U32 avstrTrackerPtrsTrackId | 1.3.6.1.4.1.6889.2.6.2.1.2.3.1.1 | Unsigned32 | not-accessible | An ID of the object-tracker, taken from avstrTrackerId. |
| U32 avstrTrackerPtrsIndex | 1.3.6.1.4.1.6889.2.6.2.1.2.3.1.2 | Unsigned32 | not-accessible | A running-index to distinguish between multiple objects
pointing to the same object-tracker. |
| STR avstrTrackerPtrsDescription | 1.3.6.1.4.1.6889.2.6.2.1.2.3.1.3 | DisplayString | read-only | A user-friendly string that identifies the object that points
to this object-tracker. E.g. 'Interface FastEthernet 10/2'.
The string is equivalent to the one displayed when issuing
the 'show track detail' CLI command. |
| INT avstrTrackerPtrsType | 1.3.6.1.4.1.6889.2.6.2.1.2.3.1.4 | INTEGER | read-only | This column together with the next column -
avstrTrackerPtrsValue uniquely identify the object pointing
to this object-tracker, in a machine-friendly manner.
This column provides the semantics for interpreting
the contents of the next column - avstrTrackerPtrsValue:
none(1) - next column is N/A
trackerList(2) - next column is taken from avstrTrackerId
of the object-tracker list that points to
this object-tracker.
ifIndex(3) - next column is InterfaceIndex TC (IF-MIB)
isakmpPeer(4) - next column is avipsIsakmpPeerIdType followed
by avipsIsakmpPeerId (AVAYA-IPSEC-MIB).
ipStaticRoute(5) - next column is the following OIDs in the
following order: {ipCidrRouteStaticDest,
ipCidrRouteStaticMask,
ipCidrRouteStaticIfIndex,
ipCidrRouteStaticNextHop,
ipCidrRouteStaticPreference} (CROUTE-MIB).
ipPbrNhListEntry(6) - next column is the following OIDs in
the following order:
{nextHopListIndex, nextHopIndex}
(CROUTE-MIB). |
| OCT avstrTrackerPtrsValue | 1.3.6.1.4.1.6889.2.6.2.1.2.3.1.5 | OCTET STRING | read-only | This column together with the previous column -
avstrTrackerPtrsType uniquely identify the object pointing
to this object-tracker, in a machine-friendly manner.
See description of avstrTrackerPtrsType for more details. |
| avstrMIBNotificationPrefix | 1.3.6.1.4.1.6889.2.6.2.2 | | | |
| avstrMIBNotifications | 1.3.6.1.4.1.6889.2.6.2.2.0 | | | |
| NTF avstrTrackerOperStateChangeNotification | 1.3.6.1.4.1.6889.2.6.2.2.0.1 | | | This notification is sent whenever a state transition for
an object-tracker occurs, i.e. whenever avstrTrackerOperState
changes. |
| avstrMIBConformance | 1.3.6.1.4.1.6889.2.6.2.3 | | | |
| avstrMIBGroups | 1.3.6.1.4.1.6889.2.6.2.3.1 | | | |
| avstrRtrConfigGroup | 1.3.6.1.4.1.6889.2.6.2.3.1.1 | | | This group consists of all the SAA configuration items. |
| avstrRtrMonitoringGroup | 1.3.6.1.4.1.6889.2.6.2.3.1.2 | | | This group consists of all the SAA monitoring items. |
| avstrTrackerConfigGroup | 1.3.6.1.4.1.6889.2.6.2.3.1.3 | | | This group consists of all the Object Tracking configuration
items. |
| avstrTrackerMonitoringGroup | 1.3.6.1.4.1.6889.2.6.2.3.1.4 | | | This group consists of all the Object Tracking monitoring
items. |
| avstrMIBCompliances | 1.3.6.1.4.1.6889.2.6.2.3.2 | | | |
| avstrMIBCompliance | 1.3.6.1.4.1.6889.2.6.2.3.2.1 | | | The compliance statement for SNMP entities of
the SAA and Object Tracking MIB. |
