All MIBs › AVAYA-SAA-TRACK-MIB › avstrRtrProbeNextHopIf
avstrRtrProbeNextHopIf
Module: AVAYA-SAA-TRACK-MIB
OID (symbolic): AVAYA-SAA-TRACK-MIB::avstrRtrProbeNextHopIf
OID (numeric): 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.11
Node type: OBJECT-TYPE
Type: InterfaceIndex
Access: read-write
Description: This node is valid only if avstrRtrProbeNextHopIp is set to '0.0.0.0'.
The interface on which SAA probes generated by this entry shall exit, bypassing normal routing. A value of '0' means the probes will undergo routing normally.
NOTES: 1. In order to set this object, you must first move avstrRtrRowStatus to notInService. When finished setting this object and avstrRtrProbeNextHopMac - move it back to active. 2. When setting this object to an Ethernet type interface which does not employ DHCP client, you must also specify the next-hop MAC address by setting avstrRtrProbeNextHopMac. When a DHCP client is used, if the MAC address is not specified, the default Gateway received from the DHCP server shall be used as the next hop.
What is avstrRtrProbeNextHopIf?
This read-write object, valid only when avstrRtrProbeNextHopIp is 0.0.0.0, selects the interface that SAA probes exit on, bypassing normal routing; a value of 0 (the default) means probes are routed normally instead. To set it, an admin must first move avstrRtrRowStatus to notInService, make the change (and set avstrRtrProbeNextHopMac if using a non-DHCP Ethernet interface), then move the row back to active.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.11 snmpwalk -v2c -c public <target> AVAYA-SAA-TRACK-MIB::avstrRtrProbeNextHopIf
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.11.1 snmpget -v2c -c public <target> AVAYA-SAA-TRACK-MIB::avstrRtrProbeNextHopIf.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.11.1 s <value>
Start monitoring Avaya converged gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AVAYA-SAA-TRACK-MIB::avstrRtrProbeNextHopIf OID value, configure state conditions and alerts, and monitor any Avaya converged gateways from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6889 | avaya | AV-APPLICATION-ENABLEMENT-SERVICES-MIB |
| 1.3.6.1.4.1.6889.2 | mibs | AV-APPLICATION-ENABLEMENT-SERVICES-MIB |
| 1.3.6.1.4.1.6889.2.6 | avGatewayMibs | AVAYAGEN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6889.2.6.2 | avayaSaaTrackMib | AVAYA-SAA-TRACK-MIB |
| 1.3.6.1.4.1.6889.2.6.2.1 | avstrMIBObjects | AVAYA-SAA-TRACK-MIB |
| 1.3.6.1.4.1.6889.2.6.2.1.1 | avstrRtrMIBObjects | AVAYA-SAA-TRACK-MIB |
| 1.3.6.1.4.1.6889.2.6.2.1.1.1 | avstrRtrTable | AVAYA-SAA-TRACK-MIB |
| 1.3.6.1.4.1.6889.2.6.2.1.1.1.1 | avstrRtrEntry | AVAYA-SAA-TRACK-MIB |
| 1.3.6.1.4.1.6889.2.6.2.1.1.1.1.11 | avstrRtrProbeNextHopIf | AVAYA-SAA-TRACK-MIB |