All MIBs › AUDITEC2-MIB
Organization: auditec Corp.
Last Updated: 2001-12-11
Category: RADIUS and AAA
Description: Manages audit logging and event tracking for security-relevant configuration changes on network equipment.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is AUDITEC2-MIB?
AUDITEC2-MIB is a vendor-specific management module (branded "Auditec") aimed at audit logging and security-relevant event tracking on network equipment, per its short description. The module establishes an "auditec" management OBJECT IDENTIFIER subtree under which audit-related objects are presumably defined, though the extracted source available here is limited to this root registration. In principle a module like this would expose logged configuration-change events, user/administrator actions, and timestamps of security-relevant operations for compliance and forensic review. Because no object or table names were captured in this excerpt, specific software/hardware health counters cannot be confirmed; its focus is squarely on audit-trail/event data rather than hardware telemetry. It likely depends on a vendor enterprise SMI tree and standard SNMPv2 notification conventions, and would be deployed on routers, switches, or security appliances where change-tracking and audit compliance are required. Engineers can download the AUDITEC2-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in AUDITEC2-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- vendor-neutral audit/security management module
- network equipment with audit logging support
Monitoring Examples
The available MIB excerpt only shows the "auditec" management OBJECT IDENTIFIER root with no populated object or table names, so no concrete leaf objects can be cited. In a typical deployment, an admin would expect objects recording who made a configuration change and when, but this cannot be confirmed from the source provided. This module should be treated as a stub/registration point until the full audit object definitions are available for inspection.
This MIB depends on
Related MIBs
Imported Objects
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| TimeTicks |
From RFC1213-MIB
| DisplayString | |
| sysName |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| action | 1.3.6.1.4.1.1774.2 | |||
| STR actParam | 1.3.6.1.4.1.1774.2.2 | DisplayString | read-write | Parameter of the command sent to the probe |
| INT actType | 1.3.6.1.4.1.1774.2.1 | INTEGER | read-write | Code of the command sent to the probe |
| alarm | 1.3.6.1.4.1.1774.3 | |||
| STR almCode | 1.3.6.1.4.1.1774.3.3 | DisplayString | read-only | Identifier of the alarm |
| INT almLevel | 1.3.6.1.4.1.1774.3.4 | INTEGER | read-only | Level of the alarm |
| STR almMsg | 1.3.6.1.4.1.1774.3.2 | DisplayString | read-only | Alarm message |
| STR almOrd | 1.3.6.1.4.1.1774.3.5 | DisplayString | read-only | Name of the measure which sent the alarm |
| STR almSce | 1.3.6.1.4.1.1774.3.1 | DisplayString | read-only | Name of the scenario which sent the alarm |
| auditec | 1.3.6.1.4.1.1774 | auditec is the managment OBJECT IDENTIFIER... | ||
| enterprises | 1.3.6.1.4.1 | |||
| group | 1.3.6.1.4.1.1774.4 | |||
| STR grpName | 1.3.6.1.4.1.1774.4.1 | DisplayString | read-only | Current NEWTEST group |
| INT grpNbQueue | 1.3.6.1.4.1.1774.4.2 | INTEGER | read-only | Number of NEWTEST queues |
| TIK grpNextTime | 1.3.6.1.4.1.1774.4.3 | TimeTicks | read-only | Date of the end of the idle state. The date is written as the number of seconds since 1980, january the 1st. |
| grpOrdByNameList | 1.3.6.1.4.1.1774.4.10 | not-accessible | List of orders | |
| grpOrdList | 1.3.6.1.4.1.1774.4.6 | not-accessible | List of orders | |
| grpOrdTxtByNameList | 1.3.6.1.4.1.1774.4.11 | not-accessible | List of text orders | |
| grpOrdTxtList | 1.3.6.1.4.1.1774.4.7 | not-accessible | List of text orders | |
| grpQueueByNameList | 1.3.6.1.4.1.1774.4.8 | not-accessible | List of NEWTEST queues accessible by name | |
| grpQueueList | 1.3.6.1.4.1.1774.4.4 | not-accessible | List of NEWTEST queues | |
| grpSceByNameList | 1.3.6.1.4.1.1774.4.9 | not-accessible | List of scenarios accessible by name | |
| grpSceList | 1.3.6.1.4.1.1774.4.5 | not-accessible | List of scenarios of this group | |
| internet | 1.3.6.1 | |||
| CTR ordAccumulation | 1.3.6.1.4.1.1774.4.6.1.13 | Counter | read-only | Accumulation of orders' value since the last start |
| CTR ordAccumulationNb1 | 1.3.6.1.4.1.1774.4.6.1.20 | Counter | read-only | Number of order's value that are lower than theashold number 1 |
| CTR ordAccumulationNb2 | 1.3.6.1.4.1.1774.4.6.1.21 | Counter | read-only | Number of order's value that are upper than theashold number 1 and lower than theashold number 2 |
| CTR ordAccumulationNb3 | 1.3.6.1.4.1.1774.4.6.1.22 | Counter | read-only | Number of order's value that are upper than theashold number 2 and lower than theashold number 3 |
| CTR ordAccumulationNb4 | 1.3.6.1.4.1.1774.4.6.1.23 | Counter | read-only | Number of order's value that are upper than theashold number 3 and lower than theashold number 4 |
| CTR ordAccumulationNb5 | 1.3.6.1.4.1.1774.4.6.1.24 | Counter | read-only | Number of order's value that are upper than 4 |
| CTR ordAccumulationNbRef | 1.3.6.1.4.1.1774.4.6.1.8 | Counter | read-only | Number of orders that are lower or equal than the reference value. |
| INT ordAverage6 | 1.3.6.1.4.1.1774.4.6.1.14 | INTEGER | read-only | Average of the 6 last orders' value |
| CTR ordBNAccumulation | 1.3.6.1.4.1.1774.4.10.1.12 | Counter | read-only | Accumulation of orders' value since the last start |
| CTR ordBNAccumulationNb1 | 1.3.6.1.4.1.1774.4.10.1.19 | Counter | read-only | Number of order's value that are lower than theashold number 1 |
| CTR ordBNAccumulationNb2 | 1.3.6.1.4.1.1774.4.10.1.20 | Counter | read-only | Number of order's value that are upper than theashold number 1 and lower than theashold number 2 |
| CTR ordBNAccumulationNb3 | 1.3.6.1.4.1.1774.4.10.1.21 | Counter | read-only | Number of order's value that are upper than theashold number 2 and lower than theashold number 3 |
| CTR ordBNAccumulationNb4 | 1.3.6.1.4.1.1774.4.10.1.22 | Counter | read-only | Number of order's value that are upper than theashold number 3 and lower than theashold number 4 |
| CTR ordBNAccumulationNb5 | 1.3.6.1.4.1.1774.4.10.1.23 | Counter | read-only | Number of order's value that are upper than 4 |
| CTR ordBNAccumulationNbRef | 1.3.6.1.4.1.1774.4.10.1.7 | Counter | read-only | Number of orders that are lower or equal than the reference value. |
| INT ordBNAverage6 | 1.3.6.1.4.1.1774.4.10.1.13 | INTEGER | read-only | Average of the 6 last orderBNs' value |
| INT ordBNCoef | 1.3.6.1.4.1.1774.4.10.1.8 | INTEGER | read-only | Order scale coefficient |
| STR ordBNErrCode | 1.3.6.1.4.1.1774.4.10.1.27 | DisplayString | read-only | Error code for order execution |
| INT ordBNMax | 1.3.6.1.4.1.1774.4.10.1.11 | INTEGER | read-only | Maximum of order sample |
| INT ordBNMin | 1.3.6.1.4.1.1774.4.10.1.10 | INTEGER | read-only | Minimum of order sample |
| STR ordBNName | 1.3.6.1.4.1.1774.4.10.1.1 | DisplayString | read-only | Order name |
| CTR ordBNNbSamples | 1.3.6.1.4.1.1774.4.10.1.14 | Counter | read-only | Number of response time samples or numerical samples |
| CTR ordBNNbUnavail | 1.3.6.1.4.1.1774.4.10.1.24 | Counter | read-only | Number of unavailabilities for this order |
| INT ordBNObjNbRef | 1.3.6.1.4.1.1774.4.10.1.5 | INTEGER | read-only | Response time objective: percentage of samples that are lower or equal than the reference value. |
| STR ordBNPrev1ErrCode | 1.3.6.1.4.1.1774.4.10.1.30 | DisplayString | read-only | Error code for order execution (for sample = current - 1) |
| TIK ordBNPrev1Time | 1.3.6.1.4.1.1774.4.10.1.28 | TimeTicks | read-only | Date of order execution (for sample = current - 1). The date is written as the number of seconds since 1980, january the 1st |
| INT ordBNPrev1Value | 1.3.6.1.4.1.1774.4.10.1.29 | INTEGER | read-only | Result of order execution (for sample = current -1) |
| STR ordBNPrev2ErrCode | 1.3.6.1.4.1.1774.4.10.1.33 | DisplayString | read-only | Error code for order execution (for sample = current - 2) |
| TIK ordBNPrev2Time | 1.3.6.1.4.1.1774.4.10.1.31 | TimeTicks | read-only | Date of order execution (for sample = current - 2). The date is written as the number of seconds since 1980, january the 1st |
| INT ordBNPrev2Value | 1.3.6.1.4.1.1774.4.10.1.32 | INTEGER | read-only | Result of order execution (for sample = current - 2) |
| STR ordBNPrev3ErrCode | 1.3.6.1.4.1.1774.4.10.1.36 | DisplayString | read-only | Error code for order execution (for sample = current - 3) |
| TIK ordBNPrev3Time | 1.3.6.1.4.1.1774.4.10.1.34 | TimeTicks | read-only | Date of order execution (for sample = current - 3). The date is written as the number of seconds since 1980, january the 1st |
| INT ordBNPrev3Value | 1.3.6.1.4.1.1774.4.10.1.35 | INTEGER | read-only | Result of order execution (for sample = current - 3) |
| STR ordBNPrev4ErrCode | 1.3.6.1.4.1.1774.4.10.1.39 | DisplayString | read-only | Error code for order execution (for sample = current - 4) |
| TIK ordBNPrev4Time | 1.3.6.1.4.1.1774.4.10.1.37 | TimeTicks | read-only | Date of order execution (for sample = current - 4). The date is written as the number of seconds since 1980, january the 1st |
| INT ordBNPrev4Value | 1.3.6.1.4.1.1774.4.10.1.38 | INTEGER | read-only | Result of order execution (for sample = current - 4) |
| STR ordBNPrev5ErrCode | 1.3.6.1.4.1.1774.4.10.1.42 | DisplayString | read-only | Error code for order execution (for sample = current - 5) |
| TIK ordBNPrev5Time | 1.3.6.1.4.1.1774.4.10.1.40 | TimeTicks | read-only | Date of order execution (for sample = current - 5). The date is written as the number of seconds since 1980, january the 1st |
| INT ordBNPrev5Value | 1.3.6.1.4.1.1774.4.10.1.41 | INTEGER | read-only | Result of order execution (for sample = current - 5) |
| STR ordBNQueName | 1.3.6.1.4.1.1774.4.10.1.3 | DisplayString | read-only | Que name |
| INT ordBNRef | 1.3.6.1.4.1.1774.4.10.1.6 | INTEGER | read-only | Order's value reference |
| STR ordBNSceName | 1.3.6.1.4.1.1774.4.10.1.2 | DisplayString | read-only | Sce name |
| INT ordBNThreashold1 | 1.3.6.1.4.1.1774.4.10.1.15 | INTEGER | read-only | Theashold number 1 |
| INT ordBNThreashold2 | 1.3.6.1.4.1.1774.4.10.1.16 | INTEGER | read-only | Theashold number 2 |
| INT ordBNThreashold3 | 1.3.6.1.4.1.1774.4.10.1.17 | INTEGER | read-only | Theashold number 3 |
| INT ordBNThreashold4 | 1.3.6.1.4.1.1774.4.10.1.18 | INTEGER | read-only | Theashold number 4 |
| TIK ordBNTime | 1.3.6.1.4.1.1774.4.10.1.25 | TimeTicks | read-only | Date of order execution. The date is written as the number of seconds since 1980, january the 1st |
| INT ordBNType | 1.3.6.1.4.1.1774.4.10.1.4 | INTEGER | read-only | Order type |
| STR ordBNUnit | 1.3.6.1.4.1.1774.4.10.1.9 | DisplayString | read-only | Unit of order value |
| INT ordBNValue | 1.3.6.1.4.1.1774.4.10.1.26 | INTEGER | read-only | Result of order execution |
| INT ordCoef | 1.3.6.1.4.1.1774.4.6.1.9 | INTEGER | read-only | Order scale coefficient |
| order | 1.3.6.1.4.1.1774.4.6.1 | not-accessible | Entry of list of order | |
| orderBN | 1.3.6.1.4.1.1774.4.10.1 | not-accessible | Entry of list of order | |
| STR ordErrCode | 1.3.6.1.4.1.1774.4.6.1.28 | DisplayString | read-only | Error code for order execution |
| orderTxt | 1.3.6.1.4.1.1774.4.7.1 | not-accessible | Entry of list of text order | |
| orderTxtBN | 1.3.6.1.4.1.1774.4.11.1 | not-accessible | Entry of list of text order | |
| INT ordIndex | 1.3.6.1.4.1.1774.4.6.1.1 | INTEGER | read-only | Order index |
| INT ordMax | 1.3.6.1.4.1.1774.4.6.1.12 | INTEGER | read-only | Maximum of order sample |
| INT ordMin | 1.3.6.1.4.1.1774.4.6.1.11 | INTEGER | read-only | Minimum of order sample |
| STR ordName | 1.3.6.1.4.1.1774.4.6.1.4 | DisplayString | read-only | Order name |
| CTR ordNbSamples | 1.3.6.1.4.1.1774.4.6.1.15 | Counter | read-only | Number of response time samples or numerical samples |
| CTR ordNbUnavail | 1.3.6.1.4.1.1774.4.6.1.25 | Counter | read-only | Number of unavailabilities for this order |
| INT ordObjNbRef | 1.3.6.1.4.1.1774.4.6.1.6 | INTEGER | read-only | Response time objective: percentage of samples that are lower or equal than the reference value. |
| STR ordPrev1ErrCode | 1.3.6.1.4.1.1774.4.6.1.31 | DisplayString | read-only | Error code for order execution (for sample = current - 1) |
| TIK ordPrev1Time | 1.3.6.1.4.1.1774.4.6.1.29 | TimeTicks | read-only | Date of order execution (for sample = current - 1). The date is written as the number of seconds since 1980, january the 1st |
| INT ordPrev1Value | 1.3.6.1.4.1.1774.4.6.1.30 | INTEGER | read-only | Result of order execution (for sample = current -1) |
| STR ordPrev2ErrCode | 1.3.6.1.4.1.1774.4.6.1.34 | DisplayString | read-only | Error code for order execution (for sample = current - 2) |
| TIK ordPrev2Time | 1.3.6.1.4.1.1774.4.6.1.32 | TimeTicks | read-only | Date of order execution (for sample = current - 2). The date is written as the number of seconds since 1980, january the 1st |
| INT ordPrev2Value | 1.3.6.1.4.1.1774.4.6.1.33 | INTEGER | read-only | Result of order execution (for sample = current - 2) |
| STR ordPrev3ErrCode | 1.3.6.1.4.1.1774.4.6.1.37 | DisplayString | read-only | Error code for order execution (for sample = current - 3) |
| TIK ordPrev3Time | 1.3.6.1.4.1.1774.4.6.1.35 | TimeTicks | read-only | Date of order execution (for sample = current - 3). The date is written as the number of seconds since 1980, january the 1st |
| INT ordPrev3Value | 1.3.6.1.4.1.1774.4.6.1.36 | INTEGER | read-only | Result of order execution (for sample = current - 3) |
| STR ordPrev4ErrCode | 1.3.6.1.4.1.1774.4.6.1.40 | DisplayString | read-only | Error code for order execution (for sample = current - 4) |
| TIK ordPrev4Time | 1.3.6.1.4.1.1774.4.6.1.38 | TimeTicks | read-only | Date of order execution (for sample = current - 4). The date is written as the number of seconds since 1980, january the 1st |
| INT ordPrev4Value | 1.3.6.1.4.1.1774.4.6.1.39 | INTEGER | read-only | Result of order execution (for sample = current - 4) |
| STR ordPrev5ErrCode | 1.3.6.1.4.1.1774.4.6.1.43 | DisplayString | read-only | Error code for order execution (for sample = current - 5) |
| TIK ordPrev5Time | 1.3.6.1.4.1.1774.4.6.1.41 | TimeTicks | read-only | Date of order execution (for sample = current - 5). The date is written as the number of seconds since 1980, january the 1st |
| INT ordPrev5Value | 1.3.6.1.4.1.1774.4.6.1.42 | INTEGER | read-only | Result of order execution (for sample = current - 5) |
| INT ordQueIndex | 1.3.6.1.4.1.1774.4.6.1.3 | INTEGER | read-only | Que Index |
| INT ordRef | 1.3.6.1.4.1.1774.4.6.1.7 | INTEGER | read-only | Order's value reference |
| INT ordSceIndex | 1.3.6.1.4.1.1774.4.6.1.2 | INTEGER | read-only | Sce index |
| INT ordThreashold1 | 1.3.6.1.4.1.1774.4.6.1.16 | INTEGER | read-only | Theashold number 1 |
| INT ordThreashold2 | 1.3.6.1.4.1.1774.4.6.1.17 | INTEGER | read-only | Theashold number 2 |
| INT ordThreashold3 | 1.3.6.1.4.1.1774.4.6.1.18 | INTEGER | read-only | Theashold number 3 |
| INT ordThreashold4 | 1.3.6.1.4.1.1774.4.6.1.19 | INTEGER | read-only | Theashold number 4 |
| TIK ordTime | 1.3.6.1.4.1.1774.4.6.1.26 | TimeTicks | read-only | Date of order execution. The date is written as the number of seconds since 1980, january the 1st |
| INT ordType | 1.3.6.1.4.1.1774.4.6.1.5 | INTEGER | read-only | Order type |
| STR ordUnit | 1.3.6.1.4.1.1774.4.6.1.10 | DisplayString | read-only | Unit of order value |
| INT ordValue | 1.3.6.1.4.1.1774.4.6.1.27 | INTEGER | read-only | Result of order execution |
| STR otxBNErrCode | 1.3.6.1.4.1.1774.4.11.1.8 | DisplayString | read-only | Error code for order execution |
| STR otxBNName | 1.3.6.1.4.1.1774.4.11.1.1 | DisplayString | read-only | Order name |
| CTR otxBNNbSamples | 1.3.6.1.4.1.1774.4.11.1.4 | Counter | read-only | Number of response time samples or numerical samples |
| CTR otxBNNbUnavail | 1.3.6.1.4.1.1774.4.11.1.5 | Counter | read-only | Number of unavailabilities for this order |
| STR otxBNPrev1ErrCode | 1.3.6.1.4.1.1774.4.11.1.11 | DisplayString | read-only | Error code for order execution (for sample = current - 1) |
| TIK otxBNPrev1Time | 1.3.6.1.4.1.1774.4.11.1.9 | TimeTicks | read-only | Date of order execution (for sample = current - 1). The date is written as the number of seconds since 1980, january the 1st |
| STR otxBNPrev1Value | 1.3.6.1.4.1.1774.4.11.1.10 | DisplayString | read-only | Result of order execution (for sample = current -1) |
| STR otxBNPrev2ErrCode | 1.3.6.1.4.1.1774.4.11.1.14 | DisplayString | read-only | Error code for order execution (for sample = current - 2) |
| TIK otxBNPrev2Time | 1.3.6.1.4.1.1774.4.11.1.12 | TimeTicks | read-only | Date of order execution (for sample = current - 2). The date is written as the number of seconds since 1980, january the 1st |
| STR otxBNPrev2Value | 1.3.6.1.4.1.1774.4.11.1.13 | DisplayString | read-only | Result of order execution (for sample = current - 2) |
| STR otxBNPrev3ErrCode | 1.3.6.1.4.1.1774.4.11.1.17 | DisplayString | read-only | Error code for order execution (for sample = current - 3) |
| TIK otxBNPrev3Time | 1.3.6.1.4.1.1774.4.11.1.15 | TimeTicks | read-only | Date of order execution (for sample = current - 3). The date is written as the number of seconds since 1980, january the 1st |
| STR otxBNPrev3Value | 1.3.6.1.4.1.1774.4.11.1.16 | DisplayString | read-only | Result of order execution (for sample = current - 3) |
| STR otxBNPrev4ErrCode | 1.3.6.1.4.1.1774.4.11.1.20 | DisplayString | read-only | Error code for order execution (for sample = current - 4) |
| TIK otxBNPrev4Time | 1.3.6.1.4.1.1774.4.11.1.18 | TimeTicks | read-only | Date of order execution (for sample = current - 4). The date is written as the number of seconds since 1980, january the 1st |
| STR otxBNPrev4Value | 1.3.6.1.4.1.1774.4.11.1.19 | DisplayString | read-only | Result of order execution (for sample = current - 4) |
| STR otxBNPrev5ErrCode | 1.3.6.1.4.1.1774.4.11.1.23 | DisplayString | read-only | Error code for order execution (for sample = current - 5) |
| TIK otxBNPrev5Time | 1.3.6.1.4.1.1774.4.11.1.21 | TimeTicks | read-only | Date of order execution (for sample = current - 5). The date is written as the number of seconds since 1980, january the 1st |
| STR otxBNPrev5Value | 1.3.6.1.4.1.1774.4.11.1.22 | DisplayString | read-only | Result of order execution (for sample = current - 5) |
| STR otxBNQueName | 1.3.6.1.4.1.1774.4.11.1.3 | DisplayString | read-only | Que name |
| STR otxBNSceName | 1.3.6.1.4.1.1774.4.11.1.2 | DisplayString | read-only | Sce name |
| TIK otxBNTime | 1.3.6.1.4.1.1774.4.11.1.6 | TimeTicks | read-only | Date of order execution. The date is written as the number of seconds since 1980, january the 1st |
| STR otxBNValue | 1.3.6.1.4.1.1774.4.11.1.7 | DisplayString | read-only | Result of order execution |
| STR otxErrCode | 1.3.6.1.4.1.1774.4.7.1.9 | DisplayString | read-only | Error code for order execution |
| INT otxIndex | 1.3.6.1.4.1.1774.4.7.1.1 | INTEGER | read-only | Order index |
| STR otxName | 1.3.6.1.4.1.1774.4.7.1.4 | DisplayString | read-only | Order name |
| CTR otxNbSamples | 1.3.6.1.4.1.1774.4.7.1.5 | Counter | read-only | Number of response time samples or numerical samples |
| CTR otxNbUnavail | 1.3.6.1.4.1.1774.4.7.1.6 | Counter | read-only | Number of unavailabilities for this order |
| STR otxPrev1ErrCode | 1.3.6.1.4.1.1774.4.7.1.12 | DisplayString | read-only | Error code for order execution (for sample = current - 1) |
| TIK otxPrev1Time | 1.3.6.1.4.1.1774.4.7.1.10 | TimeTicks | read-only | Date of order execution (for sample = current - 1). The date is written as the number of seconds since 1980, january the 1st |
| STR otxPrev1Value | 1.3.6.1.4.1.1774.4.7.1.11 | DisplayString | read-only | Result of order execution (for sample = current -1) |
| STR otxPrev2ErrCode | 1.3.6.1.4.1.1774.4.7.1.15 | DisplayString | read-only | Error code for order execution (for sample = current - 2) |
| TIK otxPrev2Time | 1.3.6.1.4.1.1774.4.7.1.13 | TimeTicks | read-only | Date of order execution (for sample = current - 2). The date is written as the number of seconds since 1980, january the 1st |
| STR otxPrev2Value | 1.3.6.1.4.1.1774.4.7.1.14 | DisplayString | read-only | Result of order execution (for sample = current - 2) |
| STR otxPrev3ErrCode | 1.3.6.1.4.1.1774.4.7.1.18 | DisplayString | read-only | Error code for order execution (for sample = current - 3) |
| TIK otxPrev3Time | 1.3.6.1.4.1.1774.4.7.1.16 | TimeTicks | read-only | Date of order execution (for sample = current - 3). The date is written as the number of seconds since 1980, january the 1st |
| STR otxPrev3Value | 1.3.6.1.4.1.1774.4.7.1.17 | DisplayString | read-only | Result of order execution (for sample = current - 3) |
| STR otxPrev4ErrCode | 1.3.6.1.4.1.1774.4.7.1.21 | DisplayString | read-only | Error code for order execution (for sample = current - 4) |
| TIK otxPrev4Time | 1.3.6.1.4.1.1774.4.7.1.19 | TimeTicks | read-only | Date of order execution (for sample = current - 4). The date is written as the number of seconds since 1980, january the 1st |
| STR otxPrev4Value | 1.3.6.1.4.1.1774.4.7.1.20 | DisplayString | read-only | Result of order execution (for sample = current - 4) |
| STR otxPrev5ErrCode | 1.3.6.1.4.1.1774.4.7.1.24 | DisplayString | read-only | Error code for order execution (for sample = current - 5) |
| TIK otxPrev5Time | 1.3.6.1.4.1.1774.4.7.1.22 | TimeTicks | read-only | Date of order execution (for sample = current - 5). The date is written as the number of seconds since 1980, january the 1st |
| STR otxPrev5Value | 1.3.6.1.4.1.1774.4.7.1.23 | DisplayString | read-only | Result of order execution (for sample = current - 5) |
| INT otxQueIndex | 1.3.6.1.4.1.1774.4.7.1.3 | INTEGER | read-only | Que Index |
| INT otxSceIndex | 1.3.6.1.4.1.1774.4.7.1.2 | INTEGER | read-only | Sce index |
| TIK otxTime | 1.3.6.1.4.1.1774.4.7.1.7 | TimeTicks | read-only | Date of order execution. The date is written as the number of seconds since 1980, january the 1st |
| STR otxValue | 1.3.6.1.4.1.1774.4.7.1.8 | DisplayString | read-only | Result of order execution |
| STR prbBasePath | 1.3.6.1.4.1.1774.1.3 | DisplayString | read-only | Base directory of the probe |
| INT prbDiffGMT | 1.3.6.1.4.1.1774.1.6 | INTEGER | read-only | GMT time - local time on this probe |
| STR prbGrpList | 1.3.6.1.4.1.1774.1.4 | DisplayString | read-only | Set of NEWTEST groups available on the probe |
| TIK prbGrpStartTime | 1.3.6.1.4.1.1774.1.8 | TimeTicks | read-only | Group start time written as the number of seconds since 1980, january the 1st or 0 if no group active |
| STR prbIpAddr | 1.3.6.1.4.1.1774.1.1 | DisplayString | read-only | Probe Ip Address |
| TIK prbLastHeartBeat | 1.3.6.1.4.1.1774.1.9 | TimeTicks | read-only | Reserved |
| INT prbNewtestMemory | 1.3.6.1.4.1.1774.1.7 | INTEGER | read-only | Memory size of the Newtest process |
| INT prbServerConnection | 1.3.6.1.4.1.1774.1.5 | INTEGER | read-only | Connection with Newtest Server |
| INT prbState | 1.3.6.1.4.1.1774.1.2 | INTEGER | read-only | Current state of the probe due to user's last action |
| private | 1.3.6.1.4 | |||
| probe | 1.3.6.1.4.1.1774.1 | |||
| NTF probeAlarmEvent | 1.3.6.1.4.1.1774.0.1 | Sent by all Newtest versions | ||
| NTF probeAlarmEvent2 | 1.3.6.1.4.1.1774.0.3 | Sent by all Newtest V7 and higher | ||
| STR queBNName | 1.3.6.1.4.1.1774.4.8.1.1 | DisplayString | read-only | Queue name |
| INT queBNNbSce | 1.3.6.1.4.1.1774.4.8.1.3 | INTEGER | read-only | Nb of scenarios in the queue |
| INT queBNType | 1.3.6.1.4.1.1774.4.8.1.2 | INTEGER | read-only | Queue type |
| INT queIndex | 1.3.6.1.4.1.1774.4.4.1.1 | INTEGER | read-only | Queue index |
| STR queName | 1.3.6.1.4.1.1774.4.4.1.2 | DisplayString | read-only | Queue name |
| INT queNbSce | 1.3.6.1.4.1.1774.4.4.1.4 | INTEGER | read-only | Nb of scenarios in the queue |
| INT queType | 1.3.6.1.4.1.1774.4.4.1.3 | INTEGER | read-only | Queue type |
| queue | 1.3.6.1.4.1.1774.4.4.1 | not-accessible | Entry of NEWTEST queue list | |
| queueBN | 1.3.6.1.4.1.1774.4.8.1 | not-accessible | Entry of NEWTEST queue list | |
| CTR sceAccumulationMeasureDuration | 1.3.6.1.4.1.1774.4.5.1.10 | Counter | read-only | Scenario total measure duration |
| CTR sceAccumulationUnavailDuration | 1.3.6.1.4.1.1774.4.5.1.11 | Counter | read-only | Scenario total unavaibility duration |
| CTR sceBNAccumulationMeasureDuration | 1.3.6.1.4.1.1774.4.9.1.9 | Counter | read-only | Scenario total measure duration |
| CTR sceBNAccumulationUnavailDuration | 1.3.6.1.4.1.1774.4.9.1.10 | Counter | read-only | Scenario total unavaibility duration |
| STR sceBNName | 1.3.6.1.4.1.1774.4.9.1.1 | DisplayString | read-only | Scenario name |
| CTR sceBNNbExec | 1.3.6.1.4.1.1774.4.9.1.6 | Counter | read-only | Number of scenario executions |
| INT sceBNNbOrd | 1.3.6.1.4.1.1774.4.9.1.11 | INTEGER | read-only | Nb of orders in the scenario |
| CTR sceBNNbUnAvailExec | 1.3.6.1.4.1.1774.4.9.1.7 | Counter | read-only | Number of unavailable scenario executions |
| STR sceBNQueName | 1.3.6.1.4.1.1774.4.9.1.2 | DisplayString | read-only | Queue name |
| TIK sceBNStartTime | 1.3.6.1.4.1.1774.4.9.1.8 | TimeTicks | read-only | Scenario start time. The time is written as the number of seconds since 1980, january the 1st. 0 if the scenario is not running |
| INT sceBNState | 1.3.6.1.4.1.1774.4.9.1.5 | INTEGER | read-only | Last scenario state. State is a combination of values |
| INT sceBNType | 1.3.6.1.4.1.1774.4.9.1.3 | INTEGER | read-only | Scenario type |
| INT sceBNUnavailObj | 1.3.6.1.4.1.1774.4.9.1.4 | INTEGER | read-only | Disponibility objective |
| INT sceIndex | 1.3.6.1.4.1.1774.4.5.1.1 | INTEGER | read-only | Scenario index |
| STR sceName | 1.3.6.1.4.1.1774.4.5.1.3 | DisplayString | read-only | Scenario name |
| scenario | 1.3.6.1.4.1.1774.4.5.1 | not-accessible | Entry of list of scenarios | |
| scenarioBN | 1.3.6.1.4.1.1774.4.9.1 | not-accessible | Entry of list of scenarios | |
| CTR sceNbExec | 1.3.6.1.4.1.1774.4.5.1.7 | Counter | read-only | Number of scenario executions |
| INT sceNbOrd | 1.3.6.1.4.1.1774.4.5.1.12 | INTEGER | read-only | Nb of orders in the scenario |
| CTR sceNbUnAvailExec | 1.3.6.1.4.1.1774.4.5.1.8 | Counter | read-only | Number of unavailable scenario executions |
| INT sceQueIndex | 1.3.6.1.4.1.1774.4.5.1.2 | INTEGER | read-only | Queue index |
| TIK sceStartTime | 1.3.6.1.4.1.1774.4.5.1.9 | TimeTicks | read-only | Scenario start time. The time is written as the number of seconds since 1980, january the 1st. 0 if the scenario is not running |
| INT sceState | 1.3.6.1.4.1.1774.4.5.1.6 | INTEGER | read-only | Last scenario state |
| INT sceState2 | 1.3.6.1.4.1.1774.4.5.1.13 | INTEGER | read-only | Last scenario state. State is a combination of values |
| INT sceType | 1.3.6.1.4.1.1774.4.5.1.4 | INTEGER | read-only | Scenario type |
| INT sceUnavailObj | 1.3.6.1.4.1.1774.4.5.1.5 | INTEGER | read-only | Disponibility objective |
RFC description
Vendor-private MIB for AudiTec security/network management products; defines monitoring and configuration objects for AudiTec systems.
Start monitoring auditec Corp. network equipment (audit/security logging) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.