ATTO6500N-MIB

All MIBs › ATTO6500N-MIB

Organization: ATTO Technology, Inc.

Last Updated: 2013-04-19

Category: Fibre Channel and Storage

Description: Manages the ATTO FibreBridge 6500N FC-to-SAS storage bridge, providing port status, error counters, and zoning configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ATTO6500N-MIB?

ATTO6500N-MIB is ATTO Technology's vendor MIB for the FibreBridge 6500N, a Fibre Channel-to-SAS storage protocol bridge used to connect SAS-attached disk/tape storage to Fibre Channel SANs. It exposes device identification and inventory objects, bridgeUniqueId, vendorID, modelName, serialNumber, bridgeName, hardwareVersion, alongside dual-bank firmware version and build-date tracking (primary/secondary firmware revision and build date) reflecting the bridge's failover firmware design. Its monitoring purpose centers on hardware and software status: administrators track uptime and lastReboot to catch unexpected restarts, verify primaryFirmwareRevision/secondaryFirmwareRevision to confirm firmware compliance and know which bank is active, and use identification objects for asset tracking; the broader MIB also covers port status and error counters for the FC/SAS bridging ports. It is a self-contained vendor MIB with its own enterprise structure (attotech/attoProducts/attoMgmt) that operates within a SAN environment alongside standard FC-MIB-style monitoring on adjacent fabric switches. It's deployed wherever ATTO FibreBridge 6500N units bridge legacy or SAS-only storage/tape devices into a Fibre Channel SAN, common in backup/archive and storage migration scenarios. Engineers can download the ATTO6500N-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ATTO6500N-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ATTO FibreBridge 6500N FC-to-SAS storage bridge

Monitoring Examples

An administrator would poll uptime and lastReboot to detect an unexpected bridge restart that could explain a storage path outage, and check primaryFirmwareRevision/secondaryFirmwareRevision to confirm the bridge is running the expected/compliant firmware bank after an upgrade. serialNumber and bridgeName would be used to positively identify a specific unit when troubleshooting a SAN with multiple bridges, and modelName/vendorID confirm hardware inventory during an audit. The full MIB's port-level status and error counters, beyond this sample, would be layered on top of this for detecting FC or SAS link problems.

What Can Be Monitored

bridge uptime
last reboot time
primary/secondary firmware revision
firmware build date
bridge serial number/identification
hardware version

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION
TimeInterval

OIDs

OID symbolic	OID numeric	Type	Access	Description
attotech	1.3.6.1.4.1.4547
attoProducts	1.3.6.1.4.1.4547.1
attoMgmt	1.3.6.1.4.1.4547.2
bridge	1.3.6.1.4.1.4547.2.3			ATTO 6500N Custom MIB
bridgeTraps	1.3.6.1.4.1.4547.2.3.0
NTF bridgeTemperatureWarning	1.3.6.1.4.1.4547.2.3.0.1			Supports notification of over/under temperature warnings. The following information is returned: tempStatus - the current temperature status (normal, warning, critical) Where normal indicates the temperature is within the safe range. Warning indicates the warning threshold has been reached. Critical indicates that the temperature is outside the safe range. temperature - current temperature of the sensor Recommended severity level (for filtering): warning
NTF fcPortTransition	1.3.6.1.4.1.4547.2.3.0.2			Supports notification of fibre channel port connectivity changes. The following information is returned: fcPortPortNumber - the description of the port fcPortOperationalState - the current port state Recommended severity level (for filtering): informational
NTF sasPortTransition	1.3.6.1.4.1.4547.2.3.0.3			Supports notification of SAS port connectivity changes. The following information is returned: sasPortPortNumber - the description of the port sasPortOperationalState - the current port state Recommended severity level (for filtering): informational
NTF bridgeThroughputWarning	1.3.6.1.4.1.4547.2.3.0.4			Supports notification of max-throughput warning indicating a potential data bottleneck. Data throughput is measured as aggregate completed I/O's per second on the Fibre Channel interfaces. The following information is returned: ChassisthroughputStatus - the current throughput status normal : no data bottleneck. warning: aggregate fibre channel throughput has exceeded 50,000 IOPS. Recommended severity level (for filtering): informational
bridgeIdentity	1.3.6.1.4.1.4547.2.3.1
DIS bridgeUniqueId	1.3.6.1.4.1.4547.2.3.1.1	DisplayWWN	read-only	8-octets uniquely identifying this HW element.
STR vendorID	1.3.6.1.4.1.4547.2.3.1.2	DisplayString	read-only	Vendor ID for this HW element.
STR modelName	1.3.6.1.4.1.4547.2.3.1.3	DisplayString	read-only	Product/Model name of this HW element.
STR primaryFirmwareRevision	1.3.6.1.4.1.4547.2.3.1.4	DisplayString	read-only	Build Number, Version Number and Base Version for the firmware on the primary partition (active firmware image).
DAT primaryFirmwareBuildDate	1.3.6.1.4.1.4547.2.3.1.5	DateAndTime	read-only	Active firmware image build date and time (no time zone offset).
I32 hardwareVersion	1.3.6.1.4.1.4547.2.3.1.6	Integer32	read-only	Current version of 6500N hardware.
STR secondaryFirmwareRevision	1.3.6.1.4.1.4547.2.3.1.7	DisplayString	read-only	Version Number and Build Number for the firmware on the secondary partition (backup firmware image).
DAT secondaryFirmwareBuildDate	1.3.6.1.4.1.4547.2.3.1.8	DateAndTime	read-only	Backup Firmware image build date and time (no time zone offset).
STR serialNumber	1.3.6.1.4.1.4547.2.3.1.9	DisplayString	read-only	Serial Number of this HW element.
STR bridgeName	1.3.6.1.4.1.4547.2.3.1.10	DisplayString	read-only	User defined symbolic name assigned to this HW element.
bridgeChassis	1.3.6.1.4.1.4547.2.3.2
DAT lastReboot	1.3.6.1.4.1.4547.2.3.2.1	DateAndTime	read-only	Date and time of last reboot.
NUM uptime	1.3.6.1.4.1.4547.2.3.2.2	TimeInterval	read-only	Time since last reboot, in units of 0.01 seconds
STR lastRebootReason	1.3.6.1.4.1.4547.2.3.2.3	DisplayString	read-only	Plain text reason for last reboot.
I32 minimumOperatingTemp	1.3.6.1.4.1.4547.2.3.2.4	Integer32	read-only	Minimum Safe Operating Temperature, in degrees C
I32 maximumOperatingTemp	1.3.6.1.4.1.4547.2.3.2.5	Integer32	read-only	Maximum Safe Operating Temperature, in degrees C
I32 temperatureHighAlertSetting	1.3.6.1.4.1.4547.2.3.2.6	Integer32	read-only	High temperature warning threshold, in degrees C
I32 temperatureLowAlertSetting	1.3.6.1.4.1.4547.2.3.2.7	Integer32	read-only	Low temperature warning threshold, in degrees C
I32 chassisTemperature	1.3.6.1.4.1.4547.2.3.2.8	Integer32	read-only	Current Chassis Temperature, in degrees C
INT chassisTemperatureStatus	1.3.6.1.4.1.4547.2.3.2.9	INTEGER	read-only	The current sensor status (normal, warning or critical). Normal indicates the temperature for this HW element is within the safe range. Warning indicates that the temperature for this HW element has passed the warning threshold but is still within the safe range. Critical indicates that the temperature for this HW element is not within the safe operating temperature range.
I32 dramSingleBitErrorCount	1.3.6.1.4.1.4547.2.3.2.10	Integer32	read-only	Number of Single-bit ECC errors since last reboot
INT chassisThroughputStatus	1.3.6.1.4.1.4547.2.3.2.11	INTEGER	read-only	Overall bridge throughput status (normal, warning). Normal indicates that there is no data bottleneck. Warning indicates that the aggregate fibre channel throughput has exceeded 50,000 IOPS.
fcSFPInfoTable	1.3.6.1.4.1.4547.2.3.2.12		not-accessible	Stores configuration information relating to installed FibreChannel SFPs.
fcSFPInfoEntry	1.3.6.1.4.1.4547.2.3.2.12.1		not-accessible	Stores information about installed fibre channel SFPs.
I32 fcSFPIndex	1.3.6.1.4.1.4547.2.3.2.12.1.1	Integer32	not-accessible	Used to index the SFP in the SFP Info table.
STR fcSFPVendor	1.3.6.1.4.1.4547.2.3.2.12.1.2	DisplayString	read-only	SFP vendor name
STR fcSFPSerialNum	1.3.6.1.4.1.4547.2.3.2.12.1.3	DisplayString	read-only	SFP serial number
STR fcSFPPartNum	1.3.6.1.4.1.4547.2.3.2.12.1.4	DisplayString	read-only	SFP vendor-supplied part number
INT fcSFPDataRateCapability	1.3.6.1.4.1.4547.2.3.2.12.1.5	INTEGER	read-only	Maximum data rate capability of the fibre channel SFP.
sasQSFPInfoTable	1.3.6.1.4.1.4547.2.3.2.13		not-accessible	Stores configuration information relating to installed SAS QSFPs.
sasQSFPInfoEntry	1.3.6.1.4.1.4547.2.3.2.13.1		not-accessible	Stores information about installed SAS QSFPs.
I32 sasQSFPIndex	1.3.6.1.4.1.4547.2.3.2.13.1.1	Integer32	not-accessible	Used to index the QSFP in the QSFP Info table.
STR sasQSFPVendor	1.3.6.1.4.1.4547.2.3.2.13.1.2	DisplayString	read-only	QSFP vendor name
STR sasQSFPSerialNum	1.3.6.1.4.1.4547.2.3.2.13.1.3	DisplayString	read-only	QSFP serial number
QSF sasQSFPType	1.3.6.1.4.1.4547.2.3.2.13.1.4	QSFPTech	read-only	QSFP type
STR sasQSFPPartNum	1.3.6.1.4.1.4547.2.3.2.13.1.5	DisplayString	read-only	QSFP vendor-supplied part number
bridgePorts	1.3.6.1.4.1.4547.2.3.3
fcPortInfoTable	1.3.6.1.4.1.4547.2.3.3.1		not-accessible	Stores fibre channel specific information for each fibre channel port.
fcPortInfoEntry	1.3.6.1.4.1.4547.2.3.3.1.1		not-accessible	Stores state and capability information about the fibre channel ports.
I32 fcPortIndex	1.3.6.1.4.1.4547.2.3.3.1.1.1	Integer32	not-accessible	Used to index the fibre channel port in the FC Port Entry table.
I32 fcPortPortNumber	1.3.6.1.4.1.4547.2.3.3.1.1.2	Integer32	read-only	The fibre channel port number.
INT fcPortOperationalState	1.3.6.1.4.1.4547.2.3.3.1.1.3	INTEGER	read-only	Operational state of the fibre channel port.
INT fcPortAdminState	1.3.6.1.4.1.4547.2.3.3.1.1.4	INTEGER	read-only	Administrative state of the fibre channel port. Indicates whether the port is enabled or disabled.
INT fcPortDataRateNegotiated	1.3.6.1.4.1.4547.2.3.3.1.1.5	INTEGER	read-only	Current negotiated data rate of fibre channel port.
INT fcPortConnModeNegotiated	1.3.6.1.4.1.4547.2.3.3.1.1.6	INTEGER	read-only	Current negotiated mode of the fibre channel port.
INT fcPortDataRateConfigured	1.3.6.1.4.1.4547.2.3.3.1.1.7	INTEGER	read-only	Configured data rate of fibre channel port.
INT fcPortConnModeConfigured	1.3.6.1.4.1.4547.2.3.3.1.1.8	INTEGER	read-only	Configured mode of the fibre channel port.
INT fcPortDataRateCapability	1.3.6.1.4.1.4547.2.3.3.1.1.9	INTEGER	read-only	Maximum data rate capability of the fibre channel port.
DIS fcPortNodeName	1.3.6.1.4.1.4547.2.3.3.1.1.10	DisplayWWN	read-only	Fibre channel node name.
DIS fcPortPortName	1.3.6.1.4.1.4547.2.3.3.1.1.11	DisplayWWN	read-only	Fibre channel port name.
DIS fcPortPeerName	1.3.6.1.4.1.4547.2.3.3.1.1.12	DisplayWWN	read-only	The port name of the fabric-attached fibre channel peer. Only valid for a switched fabric. Direct-connected fibre channel ports will respond with all zeros.
fcPortStatisticsTable	1.3.6.1.4.1.4547.2.3.3.2		not-accessible	Stores fibre channel specific I/O and error statistics for each fibre channel port.
fcPortStatisticsEntry	1.3.6.1.4.1.4547.2.3.3.2.1		not-accessible	Stores statistics about fibre channel ports.
I32 fcStatsIndex	1.3.6.1.4.1.4547.2.3.3.2.1.1	Integer32	not-accessible	Used to index the fibre channel port in the Fibre Channel Port Statistics table.
U32 fcStatsTxWords	1.3.6.1.4.1.4547.2.3.3.2.1.2	Unsigned32	read-write	Number of words transmitted on this fibre channel port.
U32 fcStatsRxWords	1.3.6.1.4.1.4547.2.3.3.2.1.3	Unsigned32	read-write	Number of words received on this fibre channel port.
NUM fcStatsTimeSinceReset	1.3.6.1.4.1.4547.2.3.3.2.1.4	TimeInterval	read-only	Amount of time since the fibre channel port statistics were reset.
U32 fcStatsErrLinkFailure	1.3.6.1.4.1.4547.2.3.3.2.1.5	Unsigned32	read-write	Number of link failure events on this fibre channel port.
U32 fcStatsErrLossOfSync	1.3.6.1.4.1.4547.2.3.3.2.1.6	Unsigned32	read-write	Number of loss of sync events on this fibre channel port.
U32 fcStatsErrInvalidCRC	1.3.6.1.4.1.4547.2.3.3.2.1.7	Unsigned32	read-write	Number of frames with invalid CRCs on this fibre channel port.
U32 fcStatsErrInvalidTxWords	1.3.6.1.4.1.4547.2.3.3.2.1.8	Unsigned32	read-write	Number of invalid TX word events on this fibre channel port.
U32 fcStatsErrLipCount	1.3.6.1.4.1.4547.2.3.3.2.1.9	Unsigned32	read-write	Number of LIP events on this fibre channel port.
U32 fcStatsErrNOSCount	1.3.6.1.4.1.4547.2.3.3.2.1.10	Unsigned32	read-write	Number of NOS events on this fibre channel port.
U32 fcStatsErrSignalLoss	1.3.6.1.4.1.4547.2.3.3.2.1.11	Unsigned32	read-write	Number of loss of signal events on this fibre channel port.
U32 fcStatsErrPrimitive	1.3.6.1.4.1.4547.2.3.3.2.1.12	Unsigned32	read-write	Number of primitive sequential protocol errors on this fibre channel port.
sasPortInfoTable	1.3.6.1.4.1.4547.2.3.3.3		not-accessible	Stores SAS specific information for each SAS port.
sasPortInfoEntry	1.3.6.1.4.1.4547.2.3.3.3.1		not-accessible	Stores information about the SAS ports.
I32 sasPortIndex	1.3.6.1.4.1.4547.2.3.3.3.1.1	Integer32	not-accessible	Used to index the SAS port in the SAS Port Entry table.
I32 sasPortPortNumber	1.3.6.1.4.1.4547.2.3.3.3.1.2	Integer32	read-only	The SAS port number.
INT sasPortOperationalState	1.3.6.1.4.1.4547.2.3.3.3.1.3	INTEGER	read-only	Operational state of this entire SAS port. Degraded state is entered when fewer than all four PHYs are online. Offline state is entered when all four PHYs are offline.
PHY sasPortPhy1State	1.3.6.1.4.1.4547.2.3.3.3.1.4	PHYStatus	read-only	Operational state of SAS PHY 1 of this SAS port.
PHY sasPortPhy2State	1.3.6.1.4.1.4547.2.3.3.3.1.5	PHYStatus	read-only	Operational state of SAS PHY 2 of this SAS port.
PHY sasPortPhy3State	1.3.6.1.4.1.4547.2.3.3.3.1.6	PHYStatus	read-only	Operational state of SAS PHY 3 of this SAS port.
PHY sasPortPhy4State	1.3.6.1.4.1.4547.2.3.3.3.1.7	PHYStatus	read-only	Operational state of SAS PHY 4 of this SAS port.
INT sasPortAdminState	1.3.6.1.4.1.4547.2.3.3.3.1.8	INTEGER	read-only	Administrative state of this SAS port. Indicates whether the port is enabled or disabled.
INT sasPortDataRateCapability	1.3.6.1.4.1.4547.2.3.3.3.1.9	INTEGER	read-only	Maximum data rate capability of the SAS port.
INT sasPortDataRateNegotiated	1.3.6.1.4.1.4547.2.3.3.3.1.10	INTEGER	read-only	Current negotiated data rate of this SAS port.
DIS sasPortAddress	1.3.6.1.4.1.4547.2.3.3.3.1.11	DisplayWWN	read-only	SAS Port Address.
sasPhyStatisticsTable	1.3.6.1.4.1.4547.2.3.3.4		not-accessible	Stores SAS specific I/O and error statistics for each SAS PHY.
sasPhyStatisticsEntry	1.3.6.1.4.1.4547.2.3.3.4.1		not-accessible	Stores statistics about SAS Phys.
I32 sasPhyStatsIndex	1.3.6.1.4.1.4547.2.3.3.4.1.1	Integer32	not-accessible	Used to index the SAS PHY in the SAS PHY Statistics table.
NUM sasPhyStatsTimeSinceReset	1.3.6.1.4.1.4547.2.3.3.4.1.2	TimeInterval	read-only	Amount of time since the SAS PHY statistics were reset on this SAS PHY.
U32 sasPhyStatsErrLinkChanged	1.3.6.1.4.1.4547.2.3.3.4.1.3	Unsigned32	read-write	Number of link changed events on this SAS PHY.
U32 sasPhyStatsErrInvalidCRC	1.3.6.1.4.1.4547.2.3.3.4.1.4	Unsigned32	read-write	Number of Invalid CRC events on this SAS PHY.
U32 sasPhyStatsErrPhyReset	1.3.6.1.4.1.4547.2.3.3.4.1.5	Unsigned32	read-write	Number of Phy Reset events on this SAS PHY.
U32 sasPhyStatsErrLossOfSync	1.3.6.1.4.1.4547.2.3.3.4.1.6	Unsigned32	read-write	Number of loss of sync events on this SAS PHY.
U32 sasPhyStatsErrDisparityCount	1.3.6.1.4.1.4547.2.3.3.4.1.7	Unsigned32	read-write	Number of disparity error events on this SAS PHY.
U32 sasPhyStatsErrInvalidDwords	1.3.6.1.4.1.4547.2.3.3.4.1.8	Unsigned32	read-write	Number of invalid DWORD events on this SAS PHY.
bridgeConfig	1.3.6.1.4.1.4547.2.3.4
INT trapsEnabled	1.3.6.1.4.1.4547.2.3.4.1	INTEGER	read-only	Indicates whether traps are enabled or disabled.
INT snmpUpdatesEnabled	1.3.6.1.4.1.4547.2.3.4.2	INTEGER	read-only	Indicates whether SNMP updates are enabled or disabled.
bridgeTrapInfo	1.3.6.1.4.1.4547.2.3.5
I32 trapMaxClients	1.3.6.1.4.1.4547.2.3.5.1	Integer32	read-only	The maximum number of SNMP trap recipients supported by this HW element.
trapClientTable	1.3.6.1.4.1.4547.2.3.5.2		not-accessible	Stores a row for each IP address/port number configured to receive traps.
trapClientEntry	1.3.6.1.4.1.4547.2.3.5.2.1		not-accessible	Ip/Port pair for a specific client.
I32 trapClientIndex	1.3.6.1.4.1.4547.2.3.5.2.1.1	Integer32	not-accessible	Used to index a trap client in the trapClientTable.
STR trapClientIpAddress	1.3.6.1.4.1.4547.2.3.5.2.1.2	DisplayString	read-only	The IP address of a client registered for traps in dotted notation.
I32 trapClientPort	1.3.6.1.4.1.4547.2.3.5.2.1.3	Integer32	read-only	The UDP port to send traps for this trap client. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in this table.
INT trapClientFilter	1.3.6.1.4.1.4547.2.3.5.2.1.4	INTEGER	read-only	This value defines the trap severity filter for this trap host. The unit will send traps to this trap client that have a severity level less than or equal to this value. The default value of this object is 'warning'.
bridgeMIBConformance	1.3.6.1.4.1.4547.2.3.6
bridgeMIBCompliances	1.3.6.1.4.1.4547.2.3.6.1
bridgeBasicCompliance	1.3.6.1.4.1.4547.2.3.6.1.1			The requirements for a bridge implementation.
bridgeMIBGroups	1.3.6.1.4.1.4547.2.3.6.2
bridgeIdentityBasicGroup	1.3.6.1.4.1.4547.2.3.6.2.1			The bridge identity information group.
bridgeChassisBasicGroup	1.3.6.1.4.1.4547.2.3.6.2.2			The bridge chassis information group.
bridgFcPortInfoBasicGroup	1.3.6.1.4.1.4547.2.3.6.2.3			The bridge ports information group.
bridgeFcPortStatisicsBasicGroup	1.3.6.1.4.1.4547.2.3.6.2.4			The bridge ports information group.
bridgeSasPortInfoBasicGroup	1.3.6.1.4.1.4547.2.3.6.2.5			The bridge ports information group.
bridgeSasPortStatisicsBasicGroup	1.3.6.1.4.1.4547.2.3.6.2.6			The bridge ports information group.
bridgeConfigBasicGroup	1.3.6.1.4.1.4547.2.3.6.2.7			The bridge configuration information group.
bridgeTrapInfoBasicGroup	1.3.6.1.4.1.4547.2.3.6.2.8			The bridge trap information group.
bridgeTrapsBasicGroup	1.3.6.1.4.1.4547.2.3.6.2.9			The bridge traps group.
attoModules	1.3.6.1.4.1.4547.3
attoAgentCapability	1.3.6.1.4.1.4547.4

RFC description

ATTO 6500N Fibre Channel bridge management for SAN storage networking.

Start monitoring ATTO FibreBridge 6500N FC-to-SAS storage bridge with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ATTO6500N-MIB

What Is ATTO6500N-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description