ASCEND-MIBTRAP-MIB

All MIBs › ASCEND-MIBTRAP-MIB

Category: Alarm and Event Management, Vendor: Ascend/Lucent

Description: Defines SNMP trap definitions and notification parameters for Ascend access equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCEND-MIBTRAP-MIB?

ASCEND-MIBTRAP-MIB is an Ascend proprietary MIB that defines the common SNMP trap/notification structure and parameters used across the broader Ascend equipment MIB suite, rather than a MIB carrying its own monitoring data. It exposes shared trap OIDs and associated varbind conventions used by other Ascend MIBs to signal events. It is used indirectly for hardware/software status monitoring in the sense that it standardizes how the fault and status-change events raised by other Ascend MIBs (e.g., card failures, APS switchovers) are structured and delivered as SNMP traps, rather than exposing pollable device state itself. It underpins essentially every other ASCEND-MIB-* module that issues notifications. It was deployed on any Ascend WAN access equipment running the broader Ascend MIB suite. Engineers can download the ASCEND-MIBTRAP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-MIBTRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ascend WAN access equipment (trap/notification definitions used across the Ascend MIB suite)
Ascend (Lucent) MAX/Pipeline remote access devices

Monitoring Examples

This module chiefly defines shared trap/notification structures rather than pollable runtime objects, so there is no concrete polling scenario to describe honestly. An NMS would instead register to receive the Ascend traps defined here, which other Ascend MIBs (such as APS status or card sparing modules) raise for events like switchovers or card failures.

Imported Objects

From ASCEND-MIB

configuration

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
mibtrapProfile	1.3.6.1.4.1.529.23.132
mibtrapProfileEntry	1.3.6.1.4.1.529.23.132.1.1		not-accessible	A mibtrapProfile entry containing objects that maps to the parameters of mibtrapProfile profile.
mibtrapProfileTable	1.3.6.1.4.1.529.23.132.1		not-accessible	A list of mibtrapProfile profile entries.
INT trapProfile_Action_o	1.3.6.1.4.1.529.23.132.1.1.74	INTEGER	read-write
INT trapProfile_ActiveEnabled	1.3.6.1.4.1.529.23.132.1.1.2	INTEGER	read-write	If TRUE, profile is enabled to send traps to this target
IP trapProfile_AgentAddress	1.3.6.1.4.1.529.23.132.1.1.10	IpAddress	read-write	The IP address of the object, generating the SNMP trap.
INT trapProfile_AlarmEnabled	1.3.6.1.4.1.529.23.132.1.1.11	INTEGER	read-write	TRUE if alarm class traps are to be sent to the identified host.
INT trapProfile_AscendEnabled	1.3.6.1.4.1.529.23.132.1.1.19	INTEGER	read-write	TRUE if Ascend trap is enabled.
INT trapProfile_AscendLinkDownTrapEnabled	1.3.6.1.4.1.529.23.132.1.1.71	INTEGER	read-write	TRUE if the ascend link down trap should be sent to the identified host. This can be enabled only if linkdown-enabled is enabled. This is an alarm class trap.
INT trapProfile_AscendLinkUpTrapEnabled	1.3.6.1.4.1.529.23.132.1.1.72	INTEGER	read-write	TRUE if the ascend link up trap should be sent to the identified host. This can be enabled only if linkup-enabled is enabled. This is an alarm class trap.
INT trapProfile_AtmImaAlarmTrapEnabled	1.3.6.1.4.1.529.23.132.1.1.70	INTEGER	read-write	TRUE if IMA Alarm trap should be sent to the identified host.
INT trapProfile_AtmPvcFailureTrapEnabled	1.3.6.1.4.1.529.23.132.1.1.69	INTEGER	read-write	TRUE if PVC or Soft PVC failure trap should be sent to the identified host.
INT trapProfile_AuthenticationEnabled	1.3.6.1.4.1.529.23.132.1.1.33	INTEGER	read-write	TRUE if SNMP authentication trap is enabled.
INT trapProfile_CallLogDroppedPktEnabled	1.3.6.1.4.1.529.23.132.1.1.61	INTEGER	read-write	TRUE if call logging dropped packet trap is enabled.
INT trapProfile_CallLogServChangeEnabled	1.3.6.1.4.1.529.23.132.1.1.58	INTEGER	read-write	TRUE if call logging server change trap is enabled.
INT trapProfile_ClockChangeTrapEnabled	1.3.6.1.4.1.529.23.132.1.1.78	INTEGER	read-write	TRUE if clock change trap is enabled.
INT trapProfile_ColdstartEnabled	1.3.6.1.4.1.529.23.132.1.1.15	INTEGER	read-write	TRUE if cold start trap is enabled.
STR trapProfile_CommunityName	1.3.6.1.4.1.529.23.132.1.1.3	DisplayString	read-write	The community name associated with the SNMP PDU.
INT trapProfile_ConfigChangeEnabled	1.3.6.1.4.1.529.23.132.1.1.34	INTEGER	read-write	TRUE if SNMP configuration change trap is enabled.
INT trapProfile_ConsoleEnabled	1.3.6.1.4.1.529.23.132.1.1.20	INTEGER	read-write	TRUE if console trap is enabled.
INT trapProfile_ControllerSwitchoverEnabled	1.3.6.1.4.1.529.23.132.1.1.57	INTEGER	read-write	TRUE if controller switchover trap is enabled.
INT trapProfile_DirdoEnabled	1.3.6.1.4.1.529.23.132.1.1.29	INTEGER	read-write	TRUE if DIRDO trap is enabled.
INT trapProfile_DslThreshTrapEnabled	1.3.6.1.4.1.529.23.132.1.1.68	INTEGER	read-write	TRUE if various DSL threshold traps should be sent to the identified host.
INT trapProfile_EventOverwriteEnabled	1.3.6.1.4.1.529.23.132.1.1.25	INTEGER	read-write	TRUE if event Overwrite trap is enabled.
INT trapProfile_FrLinkdownEnabled	1.3.6.1.4.1.529.23.132.1.1.24	INTEGER	read-write	TRUE if FR Link Down trap is enabled.
INT trapProfile_FrLinkupEnabled	1.3.6.1.4.1.529.23.132.1.1.23	INTEGER	read-write	TRUE if FR link up trap is enabled.
INT trapProfile_Hdsl2ShdslThresholdTrapsEnabled	1.3.6.1.4.1.529.23.132.1.1.77	INTEGER	read-write	Set to TRUE to enable HDSL2/SHDSL threshold traps.
IP trapProfile_HostAddress	1.3.6.1.4.1.529.23.132.1.1.4	IpAddress	read-write	The LAN address of the named host. If 0 the address will be looked up via DNS or YP/NIS when supported.
STR trapProfile_HostName	1.3.6.1.4.1.529.23.132.1.1.1	DisplayString	read-only	The name of the host to send traps to. When DNS or YP/NIS is supported this name will be used to look up the LAN address when hostAddress is 0.
INT trapProfile_HostPort	1.3.6.1.4.1.529.23.132.1.1.5	INTEGER	read-write	Port number of the named host. Value 0 is not allowed
INT trapProfile_InformRetryCount	1.3.6.1.4.1.529.23.132.1.1.7	INTEGER	read-only	Number of retries attempted when acknowledgement is not received for an Inform PDU
INT trapProfile_InformTimeOut	1.3.6.1.4.1.529.23.132.1.1.6	INTEGER	read-only	Timeout interval in units of 0.01 seconds after which the Inform PDU is retransmitted on receiving no acknowledgement
INT trapProfile_InterfaceSparingEnabled	1.3.6.1.4.1.529.23.132.1.1.63	INTEGER	read-write	TRUE if interface (port) sparing trap should to be sent to the identified host.
INT trapProfile_L2tpTunnelTrapEnabled	1.3.6.1.4.1.529.23.132.1.1.79	INTEGER	read-write	TRUE if L2TP Setup failure and L2TP Tunnel Disconnect trap should be sent to the identified host.
INT trapProfile_LanModemEnabled	1.3.6.1.4.1.529.23.132.1.1.28	INTEGER	read-write	TRUE if lan modem trap is enabled.
INT trapProfile_LimSparingEnabled	1.3.6.1.4.1.529.23.132.1.1.62	INTEGER	read-write	TRUE if LIM sparing trap should to be sent to the identified host.
INT trapProfile_LinkdownEnabled	1.3.6.1.4.1.529.23.132.1.1.17	INTEGER	read-write	TRUE if link down trap is enabled.
INT trapProfile_LinkupEnabled	1.3.6.1.4.1.529.23.132.1.1.18	INTEGER	read-write	TRUE if link up trap is enabled.
INT trapProfile_McastMonitorEnabled	1.3.6.1.4.1.529.23.132.1.1.27	INTEGER	read-write	TRUE if multicast monitor trap is enabled.
INT trapProfile_MegacoLinkStatusEnabled	1.3.6.1.4.1.529.23.132.1.1.64	INTEGER	read-write	TRUE if the trap that reports changes in the operational status of media gateway control link(s) is enabled.
INT trapProfile_MultishelfEnabled	1.3.6.1.4.1.529.23.132.1.1.32	INTEGER	read-write	TRUE if multi-shelf controller state trap is enabled.
INT trapProfile_NoResourceAvailableEnabled	1.3.6.1.4.1.529.23.132.1.1.67	INTEGER	read-write	TRUE if No Resource Available to answer call is enabled.
INT trapProfile_NotificationLogEnable	1.3.6.1.4.1.529.23.132.1.1.75	INTEGER	read-write	YES if notifications sent on behalf of this entry needs to be logged.
INT trapProfile_NotificationLogLimit	1.3.6.1.4.1.529.23.132.1.1.76	INTEGER	read-write	The maximum number of notification entries that can be held in the notification log.
OCT trapProfile_NotifyTagList	1.3.6.1.4.1.529.23.132.1.1.8	OCTET STRING	read-write	String containing a list of tag values that are used to select target addresses for a particular operation.
INT trapProfile_OspfApproachingOverflowEnabled	1.3.6.1.4.1.529.23.132.1.1.55	INTEGER	read-write	TRUE if OSPF LSDB approaching overflow trap is enabled.
INT trapProfile_OspfEnabled	1.3.6.1.4.1.529.23.132.1.1.39	INTEGER	read-write	TRUE if OSPF traps are to be sent to the identified host.
INT trapProfile_OspfIfAuthFailureEnabled	1.3.6.1.4.1.529.23.132.1.1.41	INTEGER	read-write	TRUE if OSPF interface authentication failure trap is enabled.
INT trapProfile_OspfIfConfigErrorEnabled	1.3.6.1.4.1.529.23.132.1.1.40	INTEGER	read-write	TRUE if OSPF interface configuration error trap is enabled.
INT trapProfile_OspfIfRxBadPacket	1.3.6.1.4.1.529.23.132.1.1.43	INTEGER	read-write	TRUE if OSPF interface receive bad packet trap is enabled.
INT trapProfile_OspfIfStateChangeEnabled	1.3.6.1.4.1.529.23.132.1.1.42	INTEGER	read-write	TRUE if OSPF interface state change trap is enabled.
INT trapProfile_OspfLsdbOverflowEnabled	1.3.6.1.4.1.529.23.132.1.1.54	INTEGER	read-write	TRUE if OSPF LSDB overflow trap is enabled.
INT trapProfile_OspfMaxAgeLsaEnabled	1.3.6.1.4.1.529.23.132.1.1.53	INTEGER	read-write	TRUE if OSPF MaxAgeLsa trap is enabled.
INT trapProfile_OspfNbrStateChangeEnabled	1.3.6.1.4.1.529.23.132.1.1.45	INTEGER	read-write	TRUE if OSPF neighbor state change trap is enabled.
INT trapProfile_OspfOriginateLsaEnabled	1.3.6.1.4.1.529.23.132.1.1.52	INTEGER	read-write	TRUE if OSPF originate LSA trap is enabled.
INT trapProfile_OspfTxRetransmitEnabled	1.3.6.1.4.1.529.23.132.1.1.44	INTEGER	read-write	TRUE if OSPF retransmit trap is enabled.
INT trapProfile_OspfVirtIfAuthFailureEnabled	1.3.6.1.4.1.529.23.132.1.1.47	INTEGER	read-write	TRUE if OSPF virtual interface authentication failure trap is enabled.
INT trapProfile_OspfVirtIfConfigErrorEnabled	1.3.6.1.4.1.529.23.132.1.1.46	INTEGER	read-write	TRUE if OSPF virtual interface configuration error trap is enabled.
INT trapProfile_OspfVirtIfRxBadPacket	1.3.6.1.4.1.529.23.132.1.1.49	INTEGER	read-write	TRUE if OSPF virtual interface receive bad packet trap is enabled.
INT trapProfile_OspfVirtIfStateChangeEnabled	1.3.6.1.4.1.529.23.132.1.1.48	INTEGER	read-write	TRUE if OSPF virtual interface state change trap is enabled.
INT trapProfile_OspfVirtIfTxRetransmitEnabled	1.3.6.1.4.1.529.23.132.1.1.50	INTEGER	read-write	TRUE if OSPF virtual interface retransmit trap is enabled.
INT trapProfile_OspfVirtNbrStateChangeEnabled	1.3.6.1.4.1.529.23.132.1.1.51	INTEGER	read-write	TRUE if OSPF virtual neighbor state change trap is enabled.
INT trapProfile_PasswordEnabled	1.3.6.1.4.1.529.23.132.1.1.22	INTEGER	read-write	TRUE if Telnet password trap is enabled.
INT trapProfile_PctfiTrunkStatusChangeEnabled	1.3.6.1.4.1.529.23.132.1.1.66	INTEGER	read-write	TRUE if enabledPctfiTrunkStatusChange is enabled.
INT trapProfile_PortEnabled	1.3.6.1.4.1.529.23.132.1.1.13	INTEGER	read-write	TRUE if port class traps are to be sent to the identified host.
INT trapProfile_PowerSupplyEnabled	1.3.6.1.4.1.529.23.132.1.1.31	INTEGER	read-write	TRUE if power supply changed trap is enabled.
INT trapProfile_PrimarySdtnEmptyEnabled	1.3.6.1.4.1.529.23.132.1.1.36	INTEGER	read-write	TRUE if SDTN Primary List Empty trap is enabled.
INT trapProfile_RadiusChangeEnabled	1.3.6.1.4.1.529.23.132.1.1.26	INTEGER	read-write	TRUE if radius change trap is enabled.
INT trapProfile_SecondaryControllerStateChangeEnabled	1.3.6.1.4.1.529.23.132.1.1.65	INTEGER	read-write	TRUE if cntrReduAvailTrap is enabled.
INT trapProfile_SecondarySdtnEmptyEnabled	1.3.6.1.4.1.529.23.132.1.1.37	INTEGER	read-write	TRUE if SDTN Secondary List Empty trap is enabled.
INT trapProfile_SecurityEnabled	1.3.6.1.4.1.529.23.132.1.1.12	INTEGER	read-write	TRUE if security class traps are to be sent to the identified host.
INT trapProfile_SlotEnabled	1.3.6.1.4.1.529.23.132.1.1.14	INTEGER	read-write	TRUE if slot class traps are to be sent to the identified host.
INT trapProfile_SlotProfileChangeEnabled	1.3.6.1.4.1.529.23.132.1.1.30	INTEGER	read-write	TRUE if slot profile change trap is enabled.
INT trapProfile_SnmpIllegalAccessAttempt	1.3.6.1.4.1.529.23.132.1.1.73	INTEGER	read-write	TRUE if the ascend security alert trap is enabled.
INT trapProfile_SuspectAccessResourceEnabled	1.3.6.1.4.1.529.23.132.1.1.38	INTEGER	read-write	TRUE if suspect access resource trap is enabled.
INT trapProfile_SysClockDriftEnabled	1.3.6.1.4.1.529.23.132.1.1.35	INTEGER	read-write	TRUE if system clock drifted trap is enabled.
OCT trapProfile_TargetParamsName	1.3.6.1.4.1.529.23.132.1.1.9	OCTET STRING	read-write	Index to the row an entry in SNMPV3-TARGET-PARAM table which is used when generating messages to be sent to this host-address
INT trapProfile_UseExceededEnabled	1.3.6.1.4.1.529.23.132.1.1.21	INTEGER	read-write	TRUE if use exceeded trap is enabled.
INT trapProfile_VoipGkChangeEnabled	1.3.6.1.4.1.529.23.132.1.1.59	INTEGER	read-write	TRUE if VOIP gatekeeper change trap is enabled.
INT trapProfile_WanLineStateChangeEnabled	1.3.6.1.4.1.529.23.132.1.1.60	INTEGER	read-write	TRUE if WAN line state change trap is enabled.
INT trapProfile_WarmstartEnabled	1.3.6.1.4.1.529.23.132.1.1.16	INTEGER	read-write	TRUE if warm start trap is enabled.
INT trapProfile_WatchdogWarningEnabled	1.3.6.1.4.1.529.23.132.1.1.56	INTEGER	read-write	TRUE if watchdog warning trap is enabled.

RFC description

Manages SNMP trap profile configuration for Ascend network equipment including community names and notification targets.

Start monitoring Ascend (Lucent) remote access devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCEND-MIBTRAP-MIB

What Is ASCEND-MIBTRAP-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description