ASCEND-MIBIPX-MIB

All MIBs › ASCEND-MIBIPX-MIB

Category: SNA and Legacy Protocols, Vendor: Ascend/Lucent

Description: Manages IPX protocol routing and network configuration on Ascend multi-protocol access equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCEND-MIBIPX-MIB?

ASCEND-MIBIPX-MIB is a vendor-specific MIB from Ascend Communications for managing IPX (Novell NetWare) protocol routing and network configuration on its multi-protocol WAN access equipment. It would expose IPX interface configuration, network-number/frame-type settings, and IPX routing/SAP table state, reflecting the legacy multi-protocol routing role Ascend devices played alongside IP. No module description or sample objects were provided for this module, so specific table/object names cannot be confirmed from source. Its monitoring relevance would be primarily software/configuration status for the IPX routing stack rather than physical hardware health, useful for confirming IPX connectivity and route table health on links carrying NetWare traffic. It would depend conceptually on the standard IPX MIB structure (RFC 1420-era conventions) reimplemented in Ascend's private tree. It would have been deployed on Ascend MAX/Pipeline/TNT access routers in legacy enterprise networks still running Novell NetWare/IPX alongside IP. Engineers can download the ASCEND-MIBIPX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-MIBIPX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ascend MAX/Pipeline/TNT multi-protocol access routers

Monitoring Examples

Because no sample_objects were provided for this module, a concrete object-level polling scenario cannot be honestly constructed; in general, an operator would be expected to check IPX interface and routing-table status to confirm NetWare traffic is being routed correctly across the WAN link, and to detect a missing or stale IPX route indicating a connectivity fault to a remote NetWare segment.

Imported Objects

From ASCEND-MIB

configuration

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
mibipxInterfaceProfile	1.3.6.1.4.1.529.23.86
mibipxInterfaceProfileTable	1.3.6.1.4.1.529.23.86.1		not-accessible	A list of mibipxInterfaceProfile profile entries.
mibipxInterfaceProfileEntry	1.3.6.1.4.1.529.23.86.1.1		not-accessible	A mibipxInterfaceProfile entry containing objects that maps to the parameters of mibipxInterfaceProfile profile.
INT ipxInterfaceProfile_Shelf_o	1.3.6.1.4.1.529.23.86.1.1.1	INTEGER	read-only
INT ipxInterfaceProfile_Slot_o	1.3.6.1.4.1.529.23.86.1.1.2	INTEGER	read-only
INT ipxInterfaceProfile_Item_o	1.3.6.1.4.1.529.23.86.1.1.3	INTEGER	read-only
INT ipxInterfaceProfile_LogicalItem_o	1.3.6.1.4.1.529.23.86.1.1.4	INTEGER	read-only
INT ipxInterfaceProfile_InterfaceAddress_PhysicalAddress_Shelf	1.3.6.1.4.1.529.23.86.1.1.5	INTEGER	read-write	The number of the shelf that the addressed physical device resides on.
INT ipxInterfaceProfile_InterfaceAddress_PhysicalAddress_Slot	1.3.6.1.4.1.529.23.86.1.1.6	INTEGER	read-write	The number of the slot that the addressed physical device resides on.
INT ipxInterfaceProfile_InterfaceAddress_PhysicalAddress_ItemNumber	1.3.6.1.4.1.529.23.86.1.1.7	INTEGER	read-write	A number that specifies an addressable entity within the context of shelf and slot.
INT ipxInterfaceProfile_InterfaceAddress_LogicalItem	1.3.6.1.4.1.529.23.86.1.1.8	INTEGER	read-write	A number that specifies an addressable logical entity within the context of a physical address.
INT ipxInterfaceProfile_IpxRoutingEnabled	1.3.6.1.4.1.529.23.86.1.1.9	INTEGER	read-write	TRUE if this box is currently routing IPX. We don't do IPX routing protocols or packet forwarding if FALSE. Spoofing is not affected by this.
INT ipxInterfaceProfile_IpxFrame	1.3.6.1.4.1.529.23.86.1.1.10	INTEGER	read-write	The IPX Frame Type supported in this interface.
STR ipxInterfaceProfile_IpxNetNumber	1.3.6.1.4.1.529.23.86.1.1.11	DisplayString	read-write	The network number of the ipx router.
INT ipxInterfaceProfile_IpxType20	1.3.6.1.4.1.529.23.86.1.1.12	INTEGER	read-write	Propogate IPX Type 20 packets (NetBIOS).
STR ipxInterfaceProfile_IpxSapFilterName	1.3.6.1.4.1.529.23.86.1.1.13	DisplayString	read-write	The name of this filter. All filters are referenced by name so a name must be assigned to active filters.
INT ipxInterfaceProfile_oIPXSAPFilter	1.3.6.1.4.1.529.23.86.1.1.14	INTEGER	read-write	The number of the IPX SAP Filter assigned to this interface.
INT ipxInterfaceProfile_IpxSapProxy	1.3.6.1.4.1.529.23.86.1.1.15	INTEGER	read-write	Use IPX SAP Proxy.
STR ipxInterfaceProfile_Vrouter	1.3.6.1.4.1.529.23.86.1.1.16	DisplayString	read-write	Specifies the VRouter in which this IPX interface profile belongs.
INT ipxInterfaceProfile_Action_o	1.3.6.1.4.1.529.23.86.1.1.17	INTEGER	read-write
mibipxInterfaceProfile_IpxSapProxyNetTable	1.3.6.1.4.1.529.23.86.2		not-accessible	A list of mibipxInterfaceProfile__ipx_sap_proxy_net profile entries.
mibipxInterfaceProfile_IpxSapProxyNetEntry	1.3.6.1.4.1.529.23.86.2.1		not-accessible	A mibipxInterfaceProfile__ipx_sap_proxy_net entry containing objects that maps to the parameters of mibipxInterfaceProfile__ipx_sap_proxy_net profile.
INT ipxInterfaceProfile_IpxSapProxyNet_Shelf_o	1.3.6.1.4.1.529.23.86.2.1.1	INTEGER	read-only
INT ipxInterfaceProfile_IpxSapProxyNet_Slot_o	1.3.6.1.4.1.529.23.86.2.1.2	INTEGER	read-only
INT ipxInterfaceProfile_IpxSapProxyNet_Item_o	1.3.6.1.4.1.529.23.86.2.1.3	INTEGER	read-only
INT ipxInterfaceProfile_IpxSapProxyNet_LogicalItem_o	1.3.6.1.4.1.529.23.86.2.1.4	INTEGER	read-only
INT ipxInterfaceProfile_IpxSapProxyNet_Index_o	1.3.6.1.4.1.529.23.86.2.1.5	INTEGER	read-only
INT ipxInterfaceProfile_IpxSapProxyNet	1.3.6.1.4.1.529.23.86.2.1.6	INTEGER	read-write	The Network# for IPX SAP Proxy.
mibipxGlobalProfile	1.3.6.1.4.1.529.23.87
mibipxGlobalProfileTable	1.3.6.1.4.1.529.23.87.1		not-accessible	A list of mibipxGlobalProfile profile entries.
mibipxGlobalProfileEntry	1.3.6.1.4.1.529.23.87.1.1		not-accessible	A mibipxGlobalProfile entry containing objects that maps to the parameters of mibipxGlobalProfile profile.
INT ipxGlobalProfile_Index_o	1.3.6.1.4.1.529.23.87.1.1.1	INTEGER	read-only
INT ipxGlobalProfile_InterfaceAddress_PhysicalAddress_Shelf	1.3.6.1.4.1.529.23.87.1.1.2	INTEGER	read-write	The number of the shelf that the addressed physical device resides on.
INT ipxGlobalProfile_InterfaceAddress_PhysicalAddress_Slot	1.3.6.1.4.1.529.23.87.1.1.3	INTEGER	read-write	The number of the slot that the addressed physical device resides on.
INT ipxGlobalProfile_InterfaceAddress_PhysicalAddress_ItemNumber	1.3.6.1.4.1.529.23.87.1.1.4	INTEGER	read-write	A number that specifies an addressable entity within the context of shelf and slot.
INT ipxGlobalProfile_InterfaceAddress_LogicalItem	1.3.6.1.4.1.529.23.87.1.1.5	INTEGER	read-write	A number that specifies an addressable logical entity within the context of a physical address.
INT ipxGlobalProfile_IpxRoutingEnabled	1.3.6.1.4.1.529.23.87.1.1.6	INTEGER	read-write	TRUE if this box is currently routing IPX. We don't do IPX routing protocols or packet forwarding if FALSE. Spoofing is independent, not affected by this.
STR ipxGlobalProfile_IpxDialinPool	1.3.6.1.4.1.529.23.87.1.1.7	DisplayString	read-write	Dialin Pool Numbers to be shared by the ipx wan interfaces
STR ipxGlobalProfile_GlobalVrouter	1.3.6.1.4.1.529.23.87.1.1.8	DisplayString	read-write	Specifies the global VRouter.
INT ipxGlobalProfile_Action_o	1.3.6.1.4.1.529.23.87.1.1.9	INTEGER	read-write

RFC description

Configuration and management of IPX global profiles and interface parameters for Ascend communications platforms.

Start monitoring Ascend Communications (Lucent) MAX/Pipeline/TNT WAN access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCEND-MIBIPX-MIB

What Is ASCEND-MIBIPX-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description