ASCEND-MIBSTATICCONTROLLER-MIB

All MIBs › ASCEND-MIBSTATICCONTROLLER-MIB

Category: Hardware and Environment, Vendor: Ascend/Lucent

Description: Manages static controller card configuration in Ascend modular chassis equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCEND-MIBSTATICCONTROLLER-MIB?

ASCEND-MIBSTATICCONTROLLER-MIB is a proprietary Ascend module that manages static controller card configuration within Ascend's modular chassis equipment, such as the TNT platform. It exposes configuration data identifying which controller card occupies a given chassis slot and its assigned role/parameters. For monitoring, it is primarily a hardware-inventory and status tool: confirming a controller card is present, correctly configured, and matches the expected hardware type, which is foundational to diagnosing chassis-level hardware faults. It has no IETF standard counterpart, being tied entirely to Ascend's proprietary modular chassis architecture. It is deployed on modular Ascend access chassis where controller cards manage shared chassis resources across multiple line/slot cards. Engineers can download the ASCEND-MIBSTATICCONTROLLER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-MIBSTATICCONTROLLER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ascend TNT modular access chassis

Monitoring Examples

No sample_objects were provided for this module, so the scenario below is inferred from its stated purpose. An administrator would check the controller configuration entries to confirm a redundant controller card is present and correctly assigned, and would treat a missing or mismatched entry as an indicator of a failed or removed controller card. This is typically reviewed alongside the companion static slot MIB to get a full chassis hardware inventory.

What Can Be Monitored

controller card presence/status
controller slot assignment
controller configuration parameters

Imported Objects

From ASCEND-MIB

configuration

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
mibmibProfControllerStatic	1.3.6.1.4.1.529.23.30
mibmibProfControllerStaticTable	1.3.6.1.4.1.529.23.30.1		not-accessible	A list of mibmibProfControllerStatic profile entries.
mibmibProfControllerStaticEntry	1.3.6.1.4.1.529.23.30.1.1		not-accessible	A mibmibProfControllerStatic entry containing objects that maps to the parameters of mibmibProfControllerStatic profile.
INT mibProfControllerStatic_Index_o	1.3.6.1.4.1.529.23.30.1.1.1	INTEGER	read-only
INT mibProfControllerStatic_Action_o	1.3.6.1.4.1.529.23.30.1.1.2	INTEGER	read-write
mibmibProfControllerStatic_AtmParameters_OutgoingShaperTable	1.3.6.1.4.1.529.23.30.2		not-accessible	A list of mibmibProfControllerStatic__atm_parameters__outgoing_shaper profile entries.
mibmibProfControllerStatic_AtmParameters_OutgoingShaperEntry	1.3.6.1.4.1.529.23.30.2.1		not-accessible	A mibmibProfControllerStatic__atm_parameters__outgoing_shaper entry containing objects that maps to the parameters of mibmibProfControllerStatic__atm_parameters__outgoing_shaper profile.
INT mibProfControllerStatic_AtmParameters_OutgoingShaper_Index_o	1.3.6.1.4.1.529.23.30.2.1.1	INTEGER	read-only
INT mibProfControllerStatic_AtmParameters_OutgoingShaper_Index1_o	1.3.6.1.4.1.529.23.30.2.1.2	INTEGER	read-only
INT mibProfControllerStatic_AtmParameters_OutgoingShaper_QueueIndex	1.3.6.1.4.1.529.23.30.2.1.3	INTEGER	read-write	0: this shaper is inactive. Non-0: identifies the queue (of an outgoing trunk port) whose bandwidth with the specified VPI will be shaped by this shaper. Condition: queue must have already been properly configured. Limit: at most 1 shaper per VPI.
INT mibProfControllerStatic_AtmParameters_OutgoingShaper_Vpi	1.3.6.1.4.1.529.23.30.2.1.4	INTEGER	read-write	Designate the VPI whose bandwidth to be shaped.
INT mibProfControllerStatic_AtmParameters_OutgoingShaper_Bandwidth	1.3.6.1.4.1.529.23.30.2.1.5	INTEGER	read-write	Bandwidth (in KBits/sec) to shape.
mibmibProfControllerStatic_AtmParameters_OutgoingQueueTable	1.3.6.1.4.1.529.23.30.3		not-accessible	A list of mibmibProfControllerStatic__atm_parameters__outgoing_queue profile entries.
mibmibProfControllerStatic_AtmParameters_OutgoingQueueEntry	1.3.6.1.4.1.529.23.30.3.1		not-accessible	A mibmibProfControllerStatic__atm_parameters__outgoing_queue entry containing objects that maps to the parameters of mibmibProfControllerStatic__atm_parameters__outgoing_queue profile.
INT mibProfControllerStatic_AtmParameters_OutgoingQueue_Index_o	1.3.6.1.4.1.529.23.30.3.1.1	INTEGER	read-only
INT mibProfControllerStatic_AtmParameters_OutgoingQueue_Index1_o	1.3.6.1.4.1.529.23.30.3.1.2	INTEGER	read-only
INT mibProfControllerStatic_AtmParameters_OutgoingQueue_Active	1.3.6.1.4.1.529.23.30.3.1.3	INTEGER	read-write	yes: this queue (of outgoing ATM cells) is active.
STR mibProfControllerStatic_AtmParameters_OutgoingQueue_Name	1.3.6.1.4.1.529.23.30.3.1.4	DisplayString	read-only	For future use. The current design does not use this name attribute but instead references a LIM slot, CM, or trunk port by its physical-address. We may in the future support referencing a LIM slot, CM, or trunk port by its name as well as by its physical-address. This name attribute consists of a null-terminated ASCII string; is read-only; and defaults to the ASCII form of physical-address.
INT mibProfControllerStatic_AtmParameters_OutgoingQueue_PhysicalAddress_Shelf	1.3.6.1.4.1.529.23.30.3.1.5	INTEGER	read-write	The number of the shelf that the addressed physical device resides on.
INT mibProfControllerStatic_AtmParameters_OutgoingQueue_PhysicalAddress_Slot	1.3.6.1.4.1.529.23.30.3.1.6	INTEGER	read-write	The number of the slot that the addressed physical device resides on.
INT mibProfControllerStatic_AtmParameters_OutgoingQueue_PhysicalAddress_ItemNumber	1.3.6.1.4.1.529.23.30.3.1.7	INTEGER	read-write	A number that specifies an addressable entity within the context of shelf and slot.
INT mibProfControllerStatic_AtmParameters_OutgoingQueue_Cbr	1.3.6.1.4.1.529.23.30.3.1.8	INTEGER	read-write	yes: this queue supports ATM constant-bit-rate traffic. Condition: if active=yes, at least one (might be more) of cbr, real-time-vbr, non-real-time-vbr, and ubr must also be yes. Limit: at least 1, and at most 2 active queues for each ATM service category.
INT mibProfControllerStatic_AtmParameters_OutgoingQueue_RealTimeVbr	1.3.6.1.4.1.529.23.30.3.1.9	INTEGER	read-write	yes: this queue supports ATM real-time-variable-bit-rate traffic. Condition: if active=yes, at least one (might be more) of cbr, real-time-vbr, non-real-time-vbr, and ubr must also be yes. Limit: at least 1, and at most 2 active queues for each ATM service category.
INT mibProfControllerStatic_AtmParameters_OutgoingQueue_NonRealTimeVbr	1.3.6.1.4.1.529.23.30.3.1.10	INTEGER	read-write	yes: this queue supports ATM non-real-time-variable-bit-rate traffic. Condition: if active=yes, at least one (might be more) of cbr, real-time-vbr, non-real-time-vbr, and ubr must also be yes. Limit: at least 1, and at most 2 active queues for each ATM service category.
INT mibProfControllerStatic_AtmParameters_OutgoingQueue_Ubr	1.3.6.1.4.1.529.23.30.3.1.11	INTEGER	read-write	yes: this queue supports ATM unspecified-bit-rate traffic. Condition: if active=yes, at least one (might be more) of cbr, real-time-vbr, non-real-time-vbr, and ubr must also be yes. Limit: at least 1, and at most 2 active queues for each ATM service category.
INT mibProfControllerStatic_AtmParameters_OutgoingQueue_HighPriorityWeight	1.3.6.1.4.1.529.23.30.3.1.12	INTEGER	read-write	Sets the weight of this queue on the high-priority scheduler. This relative weight determines how much of the scheduler's work cycle this queue should receive relative to other queues on the same scheduler. Condition: if active=yes, either high- or low-priority-weight must be non-0. Limit: total weights per scheduler must be <= 128.
INT mibProfControllerStatic_AtmParameters_OutgoingQueue_LowPriorityWeight	1.3.6.1.4.1.529.23.30.3.1.13	INTEGER	read-write	Sets the weight of this queue on the low-priority scheduler. This relative weight determines how much of the scheduler's work cycle this queue should receive relative to other queues on the same scheduler. Condition: if active=yes, either high- or low-priority-weight must be non-0. Limit: total weights per scheduler must be <= 128.

RFC description

Vendor-specific MIB for Ascend Communications static controller management; manages static routing and controller configuration for Ascend network devices.

Start monitoring Ascend modular chassis access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCEND-MIBSTATICCONTROLLER-MIB

What Is ASCEND-MIBSTATICCONTROLLER-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description