ASCEND-MIBETHER-MIB

All MIBs › ASCEND-MIBETHER-MIB

Category: Network Interfaces, Vendor: Ascend/Lucent

Description: Manages Ethernet interface configuration, speed, duplex, and statistics on Ascend access equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCEND-MIBETHER-MIB?

ASCEND-MIBETHER-MIB is an Ascend Communications (later Lucent) proprietary MIB defining Ethernet interface profiles on Ascend MAX/Pipeline access equipment. Each profile entry, keyed by shelf/slot/item, records the interface's physical address components and configuration flags including link-state enable and overall interface enable state. As a configuration MIB it lets an administrator confirm a given Ethernet interface profile is enabled and has link-state reporting turned on before investigating a connectivity issue further. It is deployed on Ascend/Lucent WAN access routers with Ethernet LAN-facing interfaces. Engineers can download the ASCEND-MIBETHER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-MIBETHER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ascend Communications (Lucent) MAX/Pipeline WAN access routers

Monitoring Examples

An administrator checks ethernetInterfaceProfile-Enabled and ethernetInterfaceProfile-LinkStateEnabled for a specific slot/port to confirm the Ethernet interface is both enabled and reporting link state before troubleshooting a LAN connectivity complaint.

What Can Be Monitored

Ethernet interface profile enable state and link-state reporting

Imported Objects

From ASCEND-MIB

configuration

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
mibethernetInterfaceProfile	1.3.6.1.4.1.529.23.76
mibethernetInterfaceProfileTable	1.3.6.1.4.1.529.23.76.1		not-accessible	A list of mibethernetInterfaceProfile profile entries.
mibethernetInterfaceProfileEntry	1.3.6.1.4.1.529.23.76.1.1		not-accessible	A mibethernetInterfaceProfile entry containing objects that maps to the parameters of mibethernetInterfaceProfile profile.
INT ethernetInterfaceProfile_Shelf_o	1.3.6.1.4.1.529.23.76.1.1.1	INTEGER	read-only
INT ethernetInterfaceProfile_Slot_o	1.3.6.1.4.1.529.23.76.1.1.2	INTEGER	read-only
INT ethernetInterfaceProfile_Item_o	1.3.6.1.4.1.529.23.76.1.1.3	INTEGER	read-only
INT ethernetInterfaceProfile_InterfaceAddress_Shelf	1.3.6.1.4.1.529.23.76.1.1.4	INTEGER	read-write	The number of the shelf that the addressed physical device resides on.
INT ethernetInterfaceProfile_InterfaceAddress_Slot	1.3.6.1.4.1.529.23.76.1.1.5	INTEGER	read-write	The number of the slot that the addressed physical device resides on.
INT ethernetInterfaceProfile_InterfaceAddress_ItemNumber	1.3.6.1.4.1.529.23.76.1.1.6	INTEGER	read-write	A number that specifies an addressable entity within the context of shelf and slot.
INT ethernetInterfaceProfile_LinkStateEnabled	1.3.6.1.4.1.529.23.76.1.1.7	INTEGER	read-write	TRUE if the link state is honored, otherwise FALSE.
INT ethernetInterfaceProfile_Enabled	1.3.6.1.4.1.529.23.76.1.1.8	INTEGER	read-write	TRUE if the interface is enabled, otherwise FALSE.
INT ethernetInterfaceProfile_EtherIfType	1.3.6.1.4.1.529.23.76.1.1.9	INTEGER	read-only	The type of phyical interrface, UTP, COAX, AUI
INT ethernetInterfaceProfile_Filter	1.3.6.1.4.1.529.23.76.1.1.10	INTEGER	read-write	This field is for non-tnt only
INT ethernetInterfaceProfile_BridgingEnabled	1.3.6.1.4.1.529.23.76.1.1.11	INTEGER	read-write	TRUE if this interface is to support bridging.
STR ethernetInterfaceProfile_FilterName	1.3.6.1.4.1.529.23.76.1.1.12	DisplayString	read-write	The name of this filter. All filters are referenced by name so a name must be assigned to active filters.
INT ethernetInterfaceProfile_DuplexMode	1.3.6.1.4.1.529.23.76.1.1.13	INTEGER	read-write	Set the 100BaseT physical interface to full or half duplex mode. Only valid for the 100BaseT port.
INT ethernetInterfaceProfile_PppoeOptions_Pppoe	1.3.6.1.4.1.529.23.76.1.1.14	INTEGER	read-write	Enable or disable the ability to establish PPP over Ethernet session over this interface.
INT ethernetInterfaceProfile_PppoeOptions_BridgeNonPppoe	1.3.6.1.4.1.529.23.76.1.1.15	INTEGER	read-write	States wheather to bridge all other protocols except PPPoE on this interface or not.
INT ethernetInterfaceProfile_BridgingOptions_BridgingGroup	1.3.6.1.4.1.529.23.76.1.1.16	INTEGER	read-write	Select the bridging group for this connection. Group 0 disables bridging. All packets not routed will be bridged to interfaces belonging to the same group.
INT ethernetInterfaceProfile_BridgingOptions_DialOnBroadcast	1.3.6.1.4.1.529.23.76.1.1.17	INTEGER	read-write	Enable/disable outdial when broadcast frames are received.
INT ethernetInterfaceProfile_BridgingOptions_IpxSpoofing	1.3.6.1.4.1.529.23.76.1.1.18	INTEGER	read-write	Selects the IPX spoofing mode when bridging.
INT ethernetInterfaceProfile_BridgingOptions_SpoofingTimeout	1.3.6.1.4.1.529.23.76.1.1.19	INTEGER	read-write	IPX NetWare connection timeout value.
INT ethernetInterfaceProfile_BridgingOptions_Fill2	1.3.6.1.4.1.529.23.76.1.1.20	INTEGER	read-only	filler to get to 32 bit boundary
INT ethernetInterfaceProfile_BridgingOptions_BridgeType	1.3.6.1.4.1.529.23.76.1.1.21	INTEGER	read-write	For the P25 user interface.
INT ethernetInterfaceProfile_BridgingOptions_Egress	1.3.6.1.4.1.529.23.76.1.1.22	INTEGER	read-write	Enable/disable Egress on this interface. This interface will become the exit path for all packets destined to the network.
INT ethernetInterfaceProfile_MediaSpeedMbit	1.3.6.1.4.1.529.23.76.1.1.23	INTEGER	read-write	Set the BaseT physical interface media speed to 100mb or 10mb. Only valid for the BaseT port on an ether3-card.
INT ethernetInterfaceProfile_AutoNegotiate	1.3.6.1.4.1.529.23.76.1.1.24	INTEGER	read-write	Set the auto-negotiation option. Only valid for enet3nd-card.
INT ethernetInterfaceProfile_Action_o	1.3.6.1.4.1.529.23.76.1.1.25	INTEGER	read-write

RFC description

Configures Ethernet interface profiles and parameters on Ascend communications equipment.

Start monitoring Ascend Communications (Lucent) MAX/Pipeline/TNT WAN access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCEND-MIBETHER-MIB

What Is ASCEND-MIBETHER-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description