ASCEND-MIBBWALLOC-MIB

All MIBs › ASCEND-MIBBWALLOC-MIB

Category: Quality of Service, Vendor: Ascend/Lucent

Description: Manages dynamic bandwidth allocation and rate control policies on Ascend WAN equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCEND-MIBBWALLOC-MIB?

ASCEND-MIBBWALLOC-MIB is an Ascend Communications (later Lucent) vendor-specific MIB, auto-generated for TAOS-based WAN access equipment, that manages bandwidth allocation profiles and traffic shaping for ATM/WAN interfaces. It exposes per-profile traffic shaper parameters in mibbandwidthAllocProfile-TrafficShapersTable (bandwidthAllocProfile-TrafficShapers-BitRate, -PeakRate, -MaxBurstSize, -Aggregate, -Priority), per-slot upstream bandwidth allocation limits in mibbandwidthAllocProfile-BandwidthConfigTable (AllowMaxUpStreamBandwidth, AllowGuaranteedUpStreamBandwidth), ATM VPI/VCI range assignment per slot in mibbandwidthAllocProfile-SlotVpiVciRangeTable, and live bandwidth statistics in mibbandwidthStatsProfileTable (bandwidthStatsProfile-ActiveUpstreamBandwidthOnTrunks, -StandbyUpstreamBandwidthOnTrunks). This is useful for verifying that configured VC-level shaping matches policy and for tracking real-time upstream bandwidth consumption across active and standby trunks on WAN aggregation equipment. It depends on ASCEND-MIB for the parent configuration subtree, and administrators can download the ASCEND-MIBBWALLOC-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-MIBBWALLOC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ascend Communications TAOS-based WAN access/aggregation equipment

Monitoring Examples

An operator polls bandwidthAllocProfile-TrafficShapers-BitRate and -PeakRate for a given slot/VC shaper profile to confirm configured rates match the service contract, then checks bandwidthStatsProfile-ActiveUpstreamBandwidthOnTrunks; upstream utilization consistently near the configured maximum would indicate the trunk is approaching capacity and traffic may soon be shaped or dropped.

What Can Be Monitored

per-VC traffic shaper bit rate / peak rate / burst size
per-slot guaranteed and maximum upstream bandwidth
ATM VPI/VCI range configuration per slot
active vs standby trunk upstream bandwidth

Imported Objects

From ASCEND-MIB

configuration

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
mibbandwidthAllocProfile	1.3.6.1.4.1.529.23.29
mibbandwidthAllocProfileTable	1.3.6.1.4.1.529.23.29.1		not-accessible	A list of mibbandwidthAllocProfile profile entries.
mibbandwidthAllocProfileEntry	1.3.6.1.4.1.529.23.29.1.1		not-accessible	A mibbandwidthAllocProfile entry containing objects that maps to the parameters of mibbandwidthAllocProfile profile.
INT bandwidthAllocProfile_Index_o	1.3.6.1.4.1.529.23.29.1.1.1	INTEGER	read-only
INT bandwidthAllocProfile_Action_o	1.3.6.1.4.1.529.23.29.1.1.2	INTEGER	read-write
mibbandwidthAllocProfile_TrafficShapersTable	1.3.6.1.4.1.529.23.29.2		not-accessible	A list of mibbandwidthAllocProfile__traffic_shapers profile entries.
mibbandwidthAllocProfile_TrafficShapersEntry	1.3.6.1.4.1.529.23.29.2.1		not-accessible	A mibbandwidthAllocProfile__traffic_shapers entry containing objects that maps to the parameters of mibbandwidthAllocProfile__traffic_shapers profile.
INT bandwidthAllocProfile_TrafficShapers_Index_o	1.3.6.1.4.1.529.23.29.2.1.1	INTEGER	read-only
INT bandwidthAllocProfile_TrafficShapers_Index1_o	1.3.6.1.4.1.529.23.29.2.1.2	INTEGER	read-only
INT bandwidthAllocProfile_TrafficShapers_Enabled	1.3.6.1.4.1.529.23.29.2.1.3	INTEGER	read-write	TRUE if the shaper is enabled, otherwise FALSE.
INT bandwidthAllocProfile_TrafficShapers_BitRate	1.3.6.1.4.1.529.23.29.2.1.4	INTEGER	read-write	What is the sustained rate in Kilobits per second that can be transmitted by the VC(s) when using this shaper. Limited by the framer mode and the interface type.
INT bandwidthAllocProfile_TrafficShapers_PeakRate	1.3.6.1.4.1.529.23.29.2.1.5	INTEGER	read-write	What is the peak rate in Kilobits per second that can be transmitted by the VC(s) when using this shaper. Limited by the framer mode and the interface type.
INT bandwidthAllocProfile_TrafficShapers_MaxBurstSize	1.3.6.1.4.1.529.23.29.2.1.6	INTEGER	read-write	What is the maximum burst size in cell that can be transmitted during the peak rate by the VC(s) when using this shaper.
INT bandwidthAllocProfile_TrafficShapers_Aggregate	1.3.6.1.4.1.529.23.29.2.1.7	INTEGER	read-write	If FALSE each individual VC gets the bit rate that is assigned to this shaper. If TRUE the VCs share the bit rate that is assigned to this shaper equally.
INT bandwidthAllocProfile_TrafficShapers_Priority	1.3.6.1.4.1.529.23.29.2.1.8	INTEGER	read-write	A number that represent the prioriy of the shaper in respect to other shapers. 0 is the highest priority and 15 is the lowest.
mibbandwidthAllocProfile_BandwidthConfigTable	1.3.6.1.4.1.529.23.29.4		not-accessible	A list of mibbandwidthAllocProfile__bandwidth_config profile entries.
mibbandwidthAllocProfile_BandwidthConfigEntry	1.3.6.1.4.1.529.23.29.4.1		not-accessible	A mibbandwidthAllocProfile__bandwidth_config entry containing objects that maps to the parameters of mibbandwidthAllocProfile__bandwidth_config profile.
INT bandwidthAllocProfile_BandwidthConfig_Index_o	1.3.6.1.4.1.529.23.29.4.1.1	INTEGER	read-only
INT bandwidthAllocProfile_BandwidthConfig_Index1_o	1.3.6.1.4.1.529.23.29.4.1.2	INTEGER	read-only
INT bandwidthAllocProfile_BandwidthConfig_AllowMaxUpStreamBandwidth	1.3.6.1.4.1.529.23.29.4.1.3	INTEGER	read-write	Allowed maximum upstream bandwidth of the slot in Kbits/sec. The slot can send upstream traffic up to this limit but there is no guarantee that slot will be able to send this much traffic.
INT bandwidthAllocProfile_BandwidthConfig_AllowGuaranteedUpStreamBandwidth	1.3.6.1.4.1.529.23.29.4.1.4	INTEGER	read-write	Allowed guaranteed upstream bandwidth of the slot in Kbits/sec. The slot can have real-time (guaranteed) traffic bandwidth up to this limit. The total of guaranteed up stream bandwidth from all slots can not be more than the maximum bandwidth of the system.
mibbandwidthAllocProfile_SlotVpiVciRangeTable	1.3.6.1.4.1.529.23.29.5		not-accessible	A list of mibbandwidthAllocProfile__slot_vpi_vci_range profile entries.
mibbandwidthAllocProfile_SlotVpiVciRangeEntry	1.3.6.1.4.1.529.23.29.5.1		not-accessible	A mibbandwidthAllocProfile__slot_vpi_vci_range entry containing objects that maps to the parameters of mibbandwidthAllocProfile__slot_vpi_vci_range profile.
INT bandwidthAllocProfile_SlotVpiVciRange_Index_o	1.3.6.1.4.1.529.23.29.5.1.1	INTEGER	read-only
INT bandwidthAllocProfile_SlotVpiVciRange_Index1_o	1.3.6.1.4.1.529.23.29.5.1.2	INTEGER	read-only
INT bandwidthAllocProfile_SlotVpiVciRange	1.3.6.1.4.1.529.23.29.5.1.3	INTEGER	read-write	The valid range of vpi and vci for the LIM(s). This range is shared by all ports of the LIM. The user should be very careful while changing this value because ALL CONNECTIONS INVOLVING ANY OF THE PORTS OF THIS LIM WILL BE DROPPED BY THE SYSTEM IN ORDER TO MAKE NEW RANGE EFFECTIVE.
mibbandwidthStatsProfile	1.3.6.1.4.1.529.23.64
mibbandwidthStatsProfileTable	1.3.6.1.4.1.529.23.64.1		not-accessible	A list of mibbandwidthStatsProfile profile entries.
mibbandwidthStatsProfileEntry	1.3.6.1.4.1.529.23.64.1.1		not-accessible	A mibbandwidthStatsProfile entry containing objects that maps to the parameters of mibbandwidthStatsProfile profile.
INT bandwidthStatsProfile_Index_o	1.3.6.1.4.1.529.23.64.1.1.1	INTEGER	read-only
INT bandwidthStatsProfile_MaxUpstreamBandwidth	1.3.6.1.4.1.529.23.64.1.1.2	INTEGER	read-only	Maximum system upstream bandwidth in Kbits/sec.
INT bandwidthStatsProfile_ActiveUpstreamBandwidthOnTrunks	1.3.6.1.4.1.529.23.64.1.1.3	INTEGER	read-only	Currently available upstream bandwidth on active primary trunks in Kbits/sec. This value is adjusted with number of active primary trunks and their available upstream bandwidth.
INT bandwidthStatsProfile_StandbyUpstreamBandwidthOnTrunks	1.3.6.1.4.1.529.23.64.1.1.4	INTEGER	read-only	Currently available upstream bandwidth on active standby trunks in Kbits/sec. This value is adjusted with number of active standby trunks and their available upstream bandwidth.
INT bandwidthStatsProfile_Action_o	1.3.6.1.4.1.529.23.64.1.1.5	INTEGER	read-write

RFC description

Ascend Communications SNMP MIB for managing bandwidth allocation profiles and configurations. Defines constraints for guaranteed upstream bandwidth allocation per device slot to control real-time traffic limits.

Start monitoring Ascend Communications (Lucent) MAX/Pipeline/TNT WAN access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCEND-MIBBWALLOC-MIB

What Is ASCEND-MIBBWALLOC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description