All MIBs › H3C-IFQOS2-MIB
Organization: H3C Technologies Co.,Ltd.
Last Updated: 2008-12-02
Category: Quality of Service, Vendor: H3C/HH3C
Description: H3C MIB for per-interface Quality of Service version 2, managing traffic queuing, scheduling, and shaping.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is H3C-IFQOS2-MIB?
H3C-IFQOS2-MIB is an H3C proprietary MIB, version 2 of the vendor's per-interface Quality of Service management module, used to configure and monitor traffic queuing, scheduling, and shaping policies applied to network interfaces. No sample objects were supplied, but MIBs of this class typically expose per-interface/per-queue configuration such as queue algorithm, weights, and bandwidth allocation, alongside queue-level statistics like packets/bytes forwarded, dropped, and queue depth. It is primarily a performance/traffic-management MIB, letting an administrator monitor whether QoS policies are correctly applied and whether specific queues are experiencing congestion or drops, an indicator of interface-level software/traffic health rather than physical hardware fault. It is an H3C-proprietary successor to an earlier IFQOS MIB with no stated IETF dependency, though it complements the standard IF-MIB for interface indexing. It is deployed on H3C switches and routers where per-interface QoS queuing and shaping policies are configured. Network engineers evaluating or troubleshooting this functionality can download the H3C-IFQOS2-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-IFQOS2-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- H3C switch
- H3C router
Monitoring Examples
No sample objects were supplied for this MIB, so specific table or object names cannot be cited. Consistent with its stated purpose, a real deployment would poll per-interface, per-queue statistics such as drops, queue depth, and forwarded bytes to detect a queue that is dropping packets due to congestion, but the exact objects cannot be confirmed from the available source.
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-3COM-OID-MIB
| h3cCommon | OBJECT-IDENTITY |
From RFC1213-MIB
| ifIndex |
From SNMPv2-SMI
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using h3cIfQoSPassPackets OID:
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| h3cQos2 | 1.3.6.1.4.1.2011.10.2.65 | |||
| h3cIfQos2 | 1.3.6.1.4.1.2011.10.2.65.1 | Interface QoS management information base. | ||
| h3cIfQoSHardwareQueueObjects | 1.3.6.1.4.1.2011.10.2.65.1.1 | |||
| h3cIfQoSHardwareQueueConfigGroup | 1.3.6.1.4.1.2011.10.2.65.1.1.1 | |||
| h3cIfQoSQSModeTable | 1.3.6.1.4.1.2011.10.2.65.1.1.1.1 | not-accessible | A table of queue schedule mode information. | |
| h3cIfQoSQSModeEntry | 1.3.6.1.4.1.2011.10.2.65.1.1.1.1.1 | not-accessible | Queue schedule mode information entry. | |
| INT h3cIfQoSQSMode | 1.3.6.1.4.1.2011.10.2.65.1.1.1.1.1.1 | INTEGER | read-write | The mode of schedule. |
| h3cIfQoSQSWeightTable | 1.3.6.1.4.1.2011.10.2.65.1.1.1.2 | not-accessible | A table of queue schedule weight configuration information. | |
| h3cIfQoSQSWeightEntry | 1.3.6.1.4.1.2011.10.2.65.1.1.1.2.1 | not-accessible | Queue schedule weight configuration information entry. | |
| I32 h3cIfQoSQueueID | 1.3.6.1.4.1.2011.10.2.65.1.1.1.2.1.1 | Integer32 | not-accessible | Queue ID |
| INT h3cIfQoSQueueGroupType | 1.3.6.1.4.1.2011.10.2.65.1.1.1.2.1.2 | INTEGER | read-write | Group type of WRR and WFQ. |
| INT h3cIfQoSQSType | 1.3.6.1.4.1.2011.10.2.65.1.1.1.2.1.3 | INTEGER | read-write | Schedule type. |
| I32 h3cIfQoSQSValue | 1.3.6.1.4.1.2011.10.2.65.1.1.1.2.1.4 | Integer32 | read-write | Schedule value. |
| I32 h3cIfQoSQSMaxDelay | 1.3.6.1.4.1.2011.10.2.65.1.1.1.2.1.5 | Integer32 | read-write | Max delay. |
| h3cIfQoSHardwareQueueRunInfoGroup | 1.3.6.1.4.1.2011.10.2.65.1.1.2 | |||
| h3cIfQoSHardwareQueueRunInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1 | not-accessible | A table of queue statistic information. | |
| h3cIfQoSHardwareQueueRunInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1 | not-accessible | Queue statistic information entry. | |
| C64 h3cIfQoSPassPacketsEx | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.1 | Counter64 | read-only | The number of forwarded packets. |
| C64 h3cIfQoSDropPackets | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.2 | Counter64 | read-only | The number of dropped packets. |
| C64 h3cIfQoSPassBytes | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.3 | Counter64 | read-only | The bytes of forwarded packets. |
| U32 h3cIfQoSPassPPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.4 | Unsigned32 | read-only | The PPS of forwarded packets. PPS: packets per second. |
| U32 h3cIfQoSPassBPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.5 | Unsigned32 | read-only | The BPS of forwarded packets. BPS: bytes per second. |
| C64 h3cIfQoSDropBytes | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.6 | Counter64 | read-only | The bytes of dropped packets. |
| U32 h3cIfQoSQueueLengthInPkts | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.7 | Unsigned32 | read-only | The max number of packets which the queue can hold. |
| U32 h3cIfQoSQueueLengthInBytes | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.8 | Unsigned32 | read-only | The max bytes of packets which the queue can hold. |
| U32 h3cIfQoSCurQueuePkts | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.9 | Unsigned32 | read-only | The number of packets in the current queue. |
| U32 h3cIfQoSCurQueueBytes | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.10 | Unsigned32 | read-only | The bytes of packets in the current queue. |
| U32 h3cIfQoSCurQueuePPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.11 | Unsigned32 | read-only | The PPS of packets in the current queue. |
| U32 h3cIfQoSCurQueueBPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.12 | Unsigned32 | read-only | The BPS of packets in the current queue. |
| C64 h3cIfQoSTailDropPkts | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.13 | Counter64 | read-only | The number of packets dropped by tail dropping. |
| C64 h3cIfQoSTailDropBytes | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.14 | Counter64 | read-only | The bytes of packets dropped by tail dropping. |
| U32 h3cIfQoSTailDropPPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.15 | Unsigned32 | read-only | The PPS of packets dropped by tail dropping. |
| U32 h3cIfQoSTailDropBPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.16 | Unsigned32 | read-only | The BPS of packets dropped by tail dropping. |
| C64 h3cIfQoSWredDropPkts | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.17 | Counter64 | read-only | The number of packets dropped by WRED. |
| C64 h3cIfQoSWredDropBytes | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.18 | Counter64 | read-only | The bytes of packets dropped by WRED. |
| U32 h3cIfQoSWredDropPPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.19 | Unsigned32 | read-only | The PPS of packets dropped by WRED. |
| U32 h3cIfQoSWredDropBPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.1.1.20 | Unsigned32 | read-only | The BPS of packets dropped by WRED. |
| h3cIfQoSHQueueTcpRunInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2 | not-accessible | A table of queue statistic information about TCP and non-TCP packets. | |
| h3cIfQoSHQueueTcpRunInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1 | not-accessible | Queue statistic information entry about TCP and non-TCP packets. | |
| C64 h3cIfQoSWredDropLPreNTcpPkts | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.1 | Counter64 | read-only | The number of low-precedence non-TCP packets dropped by WRED. |
| C64 h3cIfQoSWredDropLPreNTcpBytes | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.2 | Counter64 | read-only | The bytes of low-precedence non-TCP packets dropped by WRED. |
| U32 h3cIfQoSWredDropLPreNTcpPPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.3 | Unsigned32 | read-only | The PPS of low-precedence non-TCP packets dropped by WRED. PPS: packets per second. |
| U32 h3cIfQoSWredDropLPreNTcpBPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.4 | Unsigned32 | read-only | The BPS of low-precedence non-TCP packets dropped by WRED. BPS: bytes per second. |
| C64 h3cIfQoSWredDropLPreTcpPkts | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.5 | Counter64 | read-only | The number of low-precedence TCP packets dropped by WRED. |
| C64 h3cIfQoSWredDropLPreTcpBytes | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.6 | Counter64 | read-only | The bytes of low-precedence TCP packets dropped by WRED. |
| U32 h3cIfQoSWredDropLPreTcpPPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.7 | Unsigned32 | read-only | The PPS of low-precedence TCP packets dropped by WRED. |
| U32 h3cIfQoSWredDropLPreTcpBPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.8 | Unsigned32 | read-only | The BPS of low-precedence TCP packets dropped by WRED. |
| C64 h3cIfQoSWredDropHPreNTcpPkts | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.9 | Counter64 | read-only | The number of high-precedence non-TCP packets dropped by WRED. |
| C64 h3cIfQoSWredDropHPreNTcpBytes | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.10 | Counter64 | read-only | The bytes of high-precedence non-TCP packets dropped by WRED. |
| U32 h3cIfQoSWredDropHPreNTcpPPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.11 | Unsigned32 | read-only | The PPS of high-precedence non-TCP packets dropped by WRED. |
| U32 h3cIfQoSWredDropHPreNTcpBPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.12 | Unsigned32 | read-only | The BPS of high-precedence non-TCP packets dropped by WRED. |
| C64 h3cIfQoSWredDropHPreTcpPkts | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.13 | Counter64 | read-only | The number of high-precedence TCP packets dropped by WRED. |
| C64 h3cIfQoSWredDropHPreTcpBytes | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.14 | Counter64 | read-only | The bytes of high-precedence TCP packets dropped by WRED. |
| U32 h3cIfQoSWredDropHPreTcpPPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.15 | Unsigned32 | read-only | The PPS of high-precedence TCP packets dropped by WRED. |
| U32 h3cIfQoSWredDropHPreTcpBPS | 1.3.6.1.4.1.2011.10.2.65.1.1.2.2.1.16 | Unsigned32 | read-only | The BPS of high-precedence TCP packets dropped by WRED. |
| h3cIfQoSSoftwareQueueObjects | 1.3.6.1.4.1.2011.10.2.65.1.2 | |||
| h3cIfQoSFIFOObject | 1.3.6.1.4.1.2011.10.2.65.1.2.1 | |||
| h3cIfQoSFIFOConfigTable | 1.3.6.1.4.1.2011.10.2.65.1.2.1.1 | not-accessible | A table of FIFO queue information. | |
| h3cIfQoSFIFOConfigEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.1.1.1 | not-accessible | FIFO queue information entry. | |
| I32 h3cIfQoSFIFOMaxQueueLen | 1.3.6.1.4.1.2011.10.2.65.1.2.1.1.1.1 | Integer32 | read-write | The maximum length of FIFO queue. |
| h3cIfQoSFIFORunInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.2.1.2 | not-accessible | A table of FIFO queue statistic information. | |
| h3cIfQoSFIFORunInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.1.2.1 | not-accessible | FIFO queue statistic information entry. | |
| I32 h3cIfQoSFIFOSize | 1.3.6.1.4.1.2011.10.2.65.1.2.1.2.1.1 | Integer32 | read-only | The number of packet in FIFO queue. |
| C64 h3cIfQoSFIFODiscardPackets | 1.3.6.1.4.1.2011.10.2.65.1.2.1.2.1.2 | Counter64 | read-only | The number of discard packet. |
| h3cIfQoSPQObject | 1.3.6.1.4.1.2011.10.2.65.1.2.2 | |||
| h3cIfQoSPQConfigGroup | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1 | |||
| h3cIfQoSPQDefaultTable | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.1 | not-accessible | A table of priority queue default configuration information. | |
| h3cIfQoSPQDefaultEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.1.1 | not-accessible | Priority queue default configuration information entry. | |
| I32 h3cIfQoSPQListNumber | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.1.1.1 | Integer32 | not-accessible | Priority queue list number. |
| PRI h3cIfQoSPQDefaultQueueType | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.1.1.2 | PriorityQueue | read-write | Specify priority queue that packets put into by default. |
| h3cIfQoSPQQueueLengthTable | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.2 | not-accessible | A table of queue length of priority queue configuration information. | |
| h3cIfQoSPQQueueLengthEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.2.1 | not-accessible | Queue length of priority queue configuration information entry. | |
| PRI h3cIfQoSPQQueueLengthType | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.2.1.1 | PriorityQueue | not-accessible | Type of priority queue. |
| I32 h3cIfQoSPQQueueLengthValue | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.2.1.2 | Integer32 | read-write | The size of priority queue. |
| h3cIfQoSPQClassRuleTable | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.3 | not-accessible | A table of class rule of priority queue information. | |
| h3cIfQoSPQClassRuleEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.3.1 | not-accessible | A table of class rule of priority queue information. | |
| INT h3cIfQoSPQClassRuleType | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.3.1.1 | INTEGER | not-accessible | Type of class rule. 'ipall' means all ip packets. |
| I32 h3cIfQoSPQClassRuleValue | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.3.1.2 | Integer32 | not-accessible | Value of class rule. interface : ifIndex ipv4acl : 2000..3999 ipv6acl : 2000..3999, 10000..42767 greater-than : 0..65535 less-than : 0..65535 tcp : 0..65535 udp : 0..65535 mpls(exp-mask) : 1..255 other types: 0 |
| PRI h3cIfQoSPQClassRuleQueueType | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.3.1.3 | PriorityQueue | read-create | Specify the queue for matched packets. |
| ROW h3cIfQoSPQClassRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.3.1.4 | RowStatus | read-create | RowStatus. |
| h3cIfQoSPQApplyTable | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.4 | not-accessible | A table of priority queue instance. | |
| h3cIfQoSPQApplyEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.4.1 | not-accessible | Priority queue instance information. | |
| I32 h3cIfQoSPQApplyListNumber | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.4.1.1 | Integer32 | read-create | Priority queue list number. |
| ROW h3cIfQoSPQApplyRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.2.2.1.4.1.2 | RowStatus | read-create | RowStatus. |
| h3cIfQoSPQRunInfoGroup | 1.3.6.1.4.1.2011.10.2.65.1.2.2.2 | |||
| h3cIfQoSPQRunInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.2.2.2.1 | not-accessible | A table of priority queue statistic information. | |
| h3cIfQoSPQRunInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.2.2.1.1 | not-accessible | Priority queue statistic information entry. | |
| PRI h3cIfQoSPQType | 1.3.6.1.4.1.2011.10.2.65.1.2.2.2.1.1.1 | PriorityQueue | not-accessible | The type of priority queue. |
| I32 h3cIfQoSPQSize | 1.3.6.1.4.1.2011.10.2.65.1.2.2.2.1.1.2 | Integer32 | read-only | The number of packets in the priority queue. |
| I32 h3cIfQoSPQLength | 1.3.6.1.4.1.2011.10.2.65.1.2.2.2.1.1.3 | Integer32 | read-only | The maximum length of priority queue. |
| C64 h3cIfQoSPQDiscardPackets | 1.3.6.1.4.1.2011.10.2.65.1.2.2.2.1.1.4 | Counter64 | read-only | The packet number of priority queue discard. |
| h3cIfQoSCQObject | 1.3.6.1.4.1.2011.10.2.65.1.2.3 | |||
| h3cIfQoSCQConfigGroup | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1 | |||
| h3cIfQoSCQDefaultTable | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.1 | not-accessible | A table of custom queue default configuration information. | |
| h3cIfQoSCQDefaultEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.1.1 | not-accessible | Custom queue default configuration information entry. | |
| I32 h3cIfQoSCQListNumber | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.1.1.1 | Integer32 | not-accessible | Custom queue list number. |
| I32 h3cIfQoSCQDefaultQueueID | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.1.1.2 | Integer32 | read-write | Default queue ID. |
| h3cIfQoSCQQueueLengthTable | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.2 | not-accessible | A table of queue length of custom queue configuration information. | |
| h3cIfQoSCQQueueLengthEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.2.1 | not-accessible | Queue length of custom queue configuration information entry. | |
| I32 h3cIfQoSCQQueueID | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.2.1.1 | Integer32 | not-accessible | Custom queue index. |
| I32 h3cIfQoSCQQueueLength | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.2.1.2 | Integer32 | read-write | The size of custom queue. |
| I32 h3cIfQoSCQQueueServing | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.2.1.3 | Integer32 | read-write | The maximum bytes that the specified queue can transmit in each turn. |
| h3cIfQoSCQClassRuleTable | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.3 | not-accessible | A table of class rule of custom queue information. | |
| h3cIfQoSCQClassRuleEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.3.1 | not-accessible | A table of class rule of custom queue information. | |
| INT h3cIfQoSCQClassRuleType | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.3.1.1 | INTEGER | not-accessible | Type of class rule. 'ipall' means all ip packets. |
| I32 h3cIfQoSCQClassRuleValue | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.3.1.2 | Integer32 | not-accessible | Value of class rule. interface : ifIndex ipv4acl : 2000..3999 ipv6acl : 2000..42767 greater-than : 0..65535 less-than : 0..65535 tcp : 0..65535 udp : 0..65535 mpls(exp-mask) : 1..255 other types: 0. |
| I32 h3cIfQoSCQClassRuleQueueID | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.3.1.3 | Integer32 | read-create | Specify the queue for matched packets. |
| ROW h3cIfQoSCQClassRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.3.1.4 | RowStatus | read-create | RowStatus. |
| h3cIfQoSCQApplyTable | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.4 | not-accessible | A table of custom queue instance. | |
| h3cIfQoSCQApplyEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.4.1 | not-accessible | Custom queue instance information. | |
| I32 h3cIfQoSCQApplyListNumber | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.4.1.1 | Integer32 | read-create | Custom queue list number. |
| ROW h3cIfQoSCQApplyRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.2.3.1.4.1.2 | RowStatus | read-create | RowStatus. |
| h3cIfQoSCQRunInfoGroup | 1.3.6.1.4.1.2011.10.2.65.1.2.3.2 | |||
| h3cIfQoSCQRunInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.2.3.2.1 | not-accessible | A table of custom queue statistic information. | |
| h3cIfQoSCQRunInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.3.2.1.1 | not-accessible | Custom queue statistic information entry. | |
| I32 h3cIfQoSCQRunInfoSize | 1.3.6.1.4.1.2011.10.2.65.1.2.3.2.1.1.1 | Integer32 | read-only | The number of packets in the custom queue. |
| I32 h3cIfQoSCQRunInfoLength | 1.3.6.1.4.1.2011.10.2.65.1.2.3.2.1.1.2 | Integer32 | read-only | The maximum length of custom queue. |
| C64 h3cIfQoSCQRunInfoDiscardPackets | 1.3.6.1.4.1.2011.10.2.65.1.2.3.2.1.1.3 | Counter64 | read-only | The packet number of custom queue discard. |
| h3cIfQoSWFQObject | 1.3.6.1.4.1.2011.10.2.65.1.2.4 | |||
| h3cIfQoSWFQConfigGroup | 1.3.6.1.4.1.2011.10.2.65.1.2.4.1 | |||
| h3cIfQoSWFQTable | 1.3.6.1.4.1.2011.10.2.65.1.2.4.1.1 | not-accessible | A table of weighted fair queue information. | |
| h3cIfQoSWFQEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.4.1.1.1 | not-accessible | Weighted fair queue information entry. | |
| I32 h3cIfQoSWFQQueueLength | 1.3.6.1.4.1.2011.10.2.65.1.2.4.1.1.1.1 | Integer32 | read-create | The length of weighted fair queue. |
| INT h3cIfQoSWFQQueueNumber | 1.3.6.1.4.1.2011.10.2.65.1.2.4.1.1.1.2 | INTEGER | read-create | The number of weighted fair queue. |
| ROW h3cIfQoSWFQRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.2.4.1.1.1.3 | RowStatus | read-create | RowStatus. |
| INT h3cIfQoSWFQType | 1.3.6.1.4.1.2011.10.2.65.1.2.4.1.1.1.4 | INTEGER | read-create | The type of weighted fair queue. |
| h3cIfQoSWFQRunInfoGroup | 1.3.6.1.4.1.2011.10.2.65.1.2.4.2 | |||
| h3cIfQoSWFQRunInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.2.4.2.1 | not-accessible | A table of weighted fair queue statistic information. | |
| h3cIfQoSWFQRunInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.4.2.1.1 | not-accessible | Weighted fair queue statistic information entry. | |
| I32 h3cIfQoSWFQSize | 1.3.6.1.4.1.2011.10.2.65.1.2.4.2.1.1.1 | Integer32 | read-only | The number of packets in all the queues |
| I32 h3cIfQoSWFQLength | 1.3.6.1.4.1.2011.10.2.65.1.2.4.2.1.1.2 | Integer32 | read-only | The length of weighted fair queue. |
| C64 h3cIfQoSWFQDiscardPackets | 1.3.6.1.4.1.2011.10.2.65.1.2.4.2.1.1.3 | Counter64 | read-only | The number of discarded packets in all the queues. |
| I32 h3cIfQoSWFQHashedActiveQueues | 1.3.6.1.4.1.2011.10.2.65.1.2.4.2.1.1.4 | Integer32 | read-only | The number of active queues. |
| I32 h3cIfQoSWFQHashedMaxActiveQueues | 1.3.6.1.4.1.2011.10.2.65.1.2.4.2.1.1.5 | Integer32 | read-only | The number of maximum active queues. |
| I32 h3fIfQosWFQhashedTotalQueues | 1.3.6.1.4.1.2011.10.2.65.1.2.4.2.1.1.6 | Integer32 | read-only | The number of queues. |
| h3cIfQoSBandwidthGroup | 1.3.6.1.4.1.2011.10.2.65.1.2.5 | |||
| h3cIfQoSBandwidthTable | 1.3.6.1.4.1.2011.10.2.65.1.2.5.1 | not-accessible | A table of bandwidth of interface information. | |
| h3cIfQoSBandwidthEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.5.1.1 | not-accessible | Bandwidth information entry. | |
| I32 h3cIfQoSMaxBandwidth | 1.3.6.1.4.1.2011.10.2.65.1.2.5.1.1.1 | Integer32 | read-create | The maximum bandwidth of interface. Unit : Kbps |
| I32 h3cIfQoSReservedBandwidthPct | 1.3.6.1.4.1.2011.10.2.65.1.2.5.1.1.2 | Integer32 | read-create | Max reserved bandwidth of the interface for QoS. |
| ROW h3cIfQoSBandwidthRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.2.5.1.1.3 | RowStatus | read-create | RowStatus. |
| h3cIfQoSQmtokenGroup | 1.3.6.1.4.1.2011.10.2.65.1.2.6 | |||
| h3cIfQoSQmtokenTable | 1.3.6.1.4.1.2011.10.2.65.1.2.6.1 | not-accessible | A table of qmtoken information. | |
| h3cIfQoSQmtokenEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.6.1.1 | not-accessible | Qmtoken information entry. | |
| I32 h3cIfQoSQmtokenNumber | 1.3.6.1.4.1.2011.10.2.65.1.2.6.1.1.1 | Integer32 | read-create | The number of tokens. |
| ROW h3cIfQoSQmtokenRosStatus | 1.3.6.1.4.1.2011.10.2.65.1.2.6.1.1.2 | RowStatus | read-create | RowStatus |
| h3cIfQoSRTPQObject | 1.3.6.1.4.1.2011.10.2.65.1.2.7 | |||
| h3cIfQoSRTPQConfigGroup | 1.3.6.1.4.1.2011.10.2.65.1.2.7.1 | |||
| h3cIfQoSRTPQConfigTable | 1.3.6.1.4.1.2011.10.2.65.1.2.7.1.1 | not-accessible | A table of Real-time protocol queue information. | |
| h3cIfQoSRTPQConfigEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.7.1.1.1 | not-accessible | The information of Real-time protocol queue entry. | |
| I32 h3cIfQoSRTPQStartPort | 1.3.6.1.4.1.2011.10.2.65.1.2.7.1.1.1.1 | Integer32 | read-create | Minimum threshold of UDP destination port. |
| I32 h3cIfQoSRTPQEndPort | 1.3.6.1.4.1.2011.10.2.65.1.2.7.1.1.1.2 | Integer32 | read-create | Maximum threshold of UDP destination port. |
| I32 h3cIfQoSRTPQReservedBandwidth | 1.3.6.1.4.1.2011.10.2.65.1.2.7.1.1.1.3 | Integer32 | read-create | Maximum bandwidth. unit : kbps |
| U32 h3cIfQoSRTPQCbs | 1.3.6.1.4.1.2011.10.2.65.1.2.7.1.1.1.4 | Unsigned32 | read-create | Committed Burst Size. Unit: byte |
| ROW h3cIfQoSRTPQRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.2.7.1.1.1.5 | RowStatus | read-create | RowStatus. |
| h3cIfQoSRTPQRunInfoGroup | 1.3.6.1.4.1.2011.10.2.65.1.2.7.2 | |||
| h3cIfQoSRTPQRunInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.2.7.2.1 | not-accessible | A table of statistic information of Real-time protocol information. | |
| h3cIfQoSRTPQRunInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.7.2.1.1 | not-accessible | Statistic information of Real-time protocol information entry. | |
| I32 h3cIfQoSRTPQPacketNumber | 1.3.6.1.4.1.2011.10.2.65.1.2.7.2.1.1.1 | Integer32 | read-only | The number of packets in the Real-time protocol queue. |
| I32 h3cIfQoSRTPQPacketSize | 1.3.6.1.4.1.2011.10.2.65.1.2.7.2.1.1.2 | Integer32 | read-only | The size of Real-time protocol queue. |
| C64 h3cIfQoSRTPQOutputPackets | 1.3.6.1.4.1.2011.10.2.65.1.2.7.2.1.1.3 | Counter64 | read-only | The number of output packets. |
| C64 h3cIfQoSRTPQDiscardPackets | 1.3.6.1.4.1.2011.10.2.65.1.2.7.2.1.1.4 | Counter64 | read-only | The number of discard packets. |
| h3cIfQoSCarListObject | 1.3.6.1.4.1.2011.10.2.65.1.2.8 | |||
| h3cIfQoCarListGroup | 1.3.6.1.4.1.2011.10.2.65.1.2.8.1 | |||
| h3cIfQoSCarlTable | 1.3.6.1.4.1.2011.10.2.65.1.2.8.1.1 | not-accessible | Committed Access Rate List(CARL) table. | |
| h3cIfQoSCarlEntry | 1.3.6.1.4.1.2011.10.2.65.1.2.8.1.1.1 | not-accessible | CARL configuration infomation. | |
| I32 h3cIfQoSCarlListNum | 1.3.6.1.4.1.2011.10.2.65.1.2.8.1.1.1.1 | Integer32 | not-accessible | The index of the table, which is the CARL number. |
| INT h3cIfQoSCarlParaType | 1.3.6.1.4.1.2011.10.2.65.1.2.8.1.1.1.2 | INTEGER | read-create | Parameter type of the CARL number. |
| OCT h3cIfQoSCarlParaValue | 1.3.6.1.4.1.2011.10.2.65.1.2.8.1.1.1.3 | OCTET STRING | read-create | Parameter value of the CARL table. |
| ROW h3cIfQoSCarlRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.2.8.1.1.1.4 | RowStatus | read-create | RowStatus. |
| h3cIfQoSLineRateObjects | 1.3.6.1.4.1.2011.10.2.65.1.3 | |||
| h3cIfQoSLRConfigTable | 1.3.6.1.4.1.2011.10.2.65.1.3.1 | not-accessible | A table of line rate configuration information. | |
| h3cIfQoSLRConfigEntry | 1.3.6.1.4.1.2011.10.2.65.1.3.1.1 | not-accessible | Line rate configuration information entry. | |
| DIR h3cIfQoSLRDirection | 1.3.6.1.4.1.2011.10.2.65.1.3.1.1.1 | Direction | not-accessible | Line rate on the inbound or outbound of data stream. |
| U32 h3cIfQoSLRCir | 1.3.6.1.4.1.2011.10.2.65.1.3.1.1.2 | Unsigned32 | read-create | Committed Information Rate. Unit: kbps. |
| U32 h3cIfQoSLRCbs | 1.3.6.1.4.1.2011.10.2.65.1.3.1.1.3 | Unsigned32 | read-create | Committed Burst Size. Unit: byte |
| U32 h3cIfQoSLREbs | 1.3.6.1.4.1.2011.10.2.65.1.3.1.1.4 | Unsigned32 | read-create | Excess Burst Size. Unit: byte. |
| ROW h3cIfQoSRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.3.1.1.5 | RowStatus | read-create | RowStatus. |
| h3cIfQoSLRRunInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.3.2 | not-accessible | A table of line rate run info information. | |
| h3cIfQoSLRRunInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.3.2.1 | not-accessible | Line rate run info information entry. | |
| C64 h3cIfQoSLRRunInfoPassedPackets | 1.3.6.1.4.1.2011.10.2.65.1.3.2.1.1 | Counter64 | read-only | The number of passed packets. |
| C64 h3cIfQoSLRRunInfoPassedBytes | 1.3.6.1.4.1.2011.10.2.65.1.3.2.1.2 | Counter64 | read-only | The number of passed bytes. |
| C64 h3cIfQoSLRRunInfoDelayedPackets | 1.3.6.1.4.1.2011.10.2.65.1.3.2.1.3 | Counter64 | read-only | The number of delayed packets. |
| C64 h3cIfQoSLRRunInfoDelayedBytes | 1.3.6.1.4.1.2011.10.2.65.1.3.2.1.4 | Counter64 | read-only | The number of delayed bytes. |
| INT h3cIfQoSLRRunInfoActiveShaping | 1.3.6.1.4.1.2011.10.2.65.1.3.2.1.5 | INTEGER | read-only | The flag of shaping. |
| h3cIfQoSCARObjects | 1.3.6.1.4.1.2011.10.2.65.1.4 | |||
| h3cIfQoSAggregativeCarGroup | 1.3.6.1.4.1.2011.10.2.65.1.4.1 | |||
| I32 h3cIfQoSAggregativeCarNextIndex | 1.3.6.1.4.1.2011.10.2.65.1.4.1.1 | Integer32 | read-only | This object contains an appropriate value to be used for h3cIfQoSAggregativeCarIndex when creating rows in the h3cIfQoSAggregativeCarConfigTable. Begin with 1. |
| h3cIfQoSAggregativeCarConfigTable | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2 | not-accessible | A table of aggregative car information. | |
| h3cIfQoSAggregativeCarConfigEntry | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1 | not-accessible | Aggregative car information. | |
| I32 h3cIfQoSAggregativeCarIndex | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1.1 | Integer32 | not-accessible | The index of aggregative car. |
| OCT h3cIfQoSAggregativeCarName | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1.2 | OCTET STRING | read-create | The name of aggregative car. |
| U32 h3cIfQoSAggregativeCarCir | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1.3 | Unsigned32 | read-create | Committed-information-rate. Unit : kbps |
| U32 h3cIfQoSAggregativeCarCbs | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1.4 | Unsigned32 | read-create | Committed-burst-size. Unit : byte |
| U32 h3cIfQoSAggregativeCarEbs | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1.5 | Unsigned32 | read-create | Excess-burst-size. Unit : byte |
| U32 h3cIfQoSAggregativeCarPir | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1.6 | Unsigned32 | read-create | Peak-information-rate. Unit : kbps |
| CAR h3cIfQoSAggregativeCarGreenActionType | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1.7 | CarAction | read-create | Supported green action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS. |
| I32 h3cIfQoSAggregativeCarGreenActionValue | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1.8 | Integer32 | read-create | The value is to remark When green action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. |
| CAR h3cIfQoSAggregativeCarYellowActionType | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1.9 | CarAction | read-create | Supported yellow action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS. |
| I32 h3cIfQoSAggregativeCarYellowActionValue | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1.10 | Integer32 | read-create | The value is to remark When yellow action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. |
| CAR h3cIfQoSAggregativeCarRedActionType | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1.11 | CarAction | read-create | Supported red action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS. |
| I32 h3cIfQoSAggregativeCarRedActionValue | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1.12 | Integer32 | read-create | The value is to remark When red action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. |
| INT h3cIfQoSAggregativeCarType | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1.13 | INTEGER | read-create | The type of aggregative CAR. The enumeration 'aggregative' indicates that the ports with a same aggregative CAR use one token bulk. The enumeration 'notAggregative' indicates that each port uses one token bulk. |
| ROW h3cIfQoSAggregativeCarRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.4.1.2.1.14 | RowStatus | read-create | RowStatus. |
| h3cIfQoSAggregativeCarApplyTable | 1.3.6.1.4.1.2011.10.2.65.1.4.1.3 | not-accessible | A table of aggregative car instance. | |
| h3cIfQoSAggregativeCarApplyEntry | 1.3.6.1.4.1.2011.10.2.65.1.4.1.3.1 | not-accessible | Aggregative car instance information. | |
| DIR h3cIfQoSAggregativeCarApplyDirection | 1.3.6.1.4.1.2011.10.2.65.1.4.1.3.1.1 | Direction | not-accessible | Direction. |
| INT h3cIfQoSAggregativeCarApplyRuleType | 1.3.6.1.4.1.2011.10.2.65.1.4.1.3.1.2 | INTEGER | not-accessible | The type of class rule. |
| I32 h3cIfQoSAggregativeCarApplyRuleValue | 1.3.6.1.4.1.2011.10.2.65.1.4.1.3.1.3 | Integer32 | not-accessible | The number of class rule. ipv4acl : 2000..5999 ipv6acl : 2000..42767 carl : 1..16 other types: 0. |
| I32 h3cIfQoSAggregativeCarApplyCarIndex | 1.3.6.1.4.1.2011.10.2.65.1.4.1.3.1.4 | Integer32 | read-create | The index of aggregative car. |
| ROW h3cIfQoSAggregativeCarApplyRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.4.1.3.1.5 | RowStatus | read-create | RowStatus. |
| h3cIfQoSAggregativeCarRunInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.4.1.4 | not-accessible | A table of aggregative car statistic information. | |
| h3cIfQoSAggregativeCarRunInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.4.1.4.1 | not-accessible | Aggregative car statistic information. | |
| C64 h3cIfQoSAggregativeCarGreenPackets | 1.3.6.1.4.1.2011.10.2.65.1.4.1.4.1.1 | Counter64 | read-only | Number of packets conforming CIR. |
| C64 h3cIfQoSAggregativeCarGreenBytes | 1.3.6.1.4.1.2011.10.2.65.1.4.1.4.1.2 | Counter64 | read-only | Number of bytes conforming CIR |
| C64 h3cIfQoSAggregativeCarYellowPackets | 1.3.6.1.4.1.2011.10.2.65.1.4.1.4.1.3 | Counter64 | read-only | Number of yellow packets. |
| C64 h3cIfQoSAggregativeCarYellowBytes | 1.3.6.1.4.1.2011.10.2.65.1.4.1.4.1.4 | Counter64 | read-only | Number of yellow bytes. |
| C64 h3cIfQoSAggregativeCarRedPackets | 1.3.6.1.4.1.2011.10.2.65.1.4.1.4.1.5 | Counter64 | read-only | Number of packets exceeding CIR. |
| C64 h3cIfQoSAggregativeCarRedBytes | 1.3.6.1.4.1.2011.10.2.65.1.4.1.4.1.6 | Counter64 | read-only | Number of bytes exceeding CIR. |
| h3cIfQoSTricolorCarGroup | 1.3.6.1.4.1.2011.10.2.65.1.4.2 | |||
| h3cIfQoSTricolorCarConfigTable | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1 | not-accessible | A table of tricolor car configuration information. | |
| h3cIfQoSTricolorCarConfigEntry | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1 | not-accessible | Tricolor car configuration information entry. | |
| DIR h3cIfQoSTricolorCarDirection | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1.1 | Direction | not-accessible | Direction. |
| INT h3cIfQoSTricolorCarType | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1.2 | INTEGER | not-accessible | The index of the table, which is the matching type for the packets on interface: ipv4acl, ipv6acl, carl, any. |
| I32 h3cIfQoSTricolorCarValue | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1.3 | Integer32 | not-accessible | The index of the table. ipv4acl: the number is ipv4 acl number; ipv6acl: the number is ipv6 acl number; carl: the number is CARL number; any: the number is 0; |
| U32 h3cIfQoSTricolorCarCir | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1.4 | Unsigned32 | read-create | Committed Information Rate. Unit: kbps. |
| U32 h3cIfQoSTricolorCarCbs | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1.5 | Unsigned32 | read-create | Committed Burst Size. Unit: byte. |
| U32 h3cIfQoSTricolorCarEbs | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1.6 | Unsigned32 | read-create | Excess Burst Size. Unit: byte. |
| U32 h3cIfQoSTricolorCarPir | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1.7 | Unsigned32 | read-create | Peak Information Rate. Unit: kbps. |
| CAR h3cIfQoSTricolorCarGreenActionType | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1.8 | CarAction | read-create | Green Action. |
| I32 h3cIfQoSTricolorCarGreenActionValue | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1.9 | Integer32 | read-create | The value is to remark when green action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. |
| CAR h3cIfQoSTricolorCarYellowActionType | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1.10 | CarAction | read-create | Yellow Action. |
| I32 h3cIfQoSTricolorCarYellowActionValue | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1.11 | Integer32 | read-create | The value is to remark when yellow action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. |
| CAR h3cIfQoSTricolorCarRedActionType | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1.12 | CarAction | read-create | Red Action |
| I32 h3cIfQoSTricolorCarRedActionValue | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1.13 | Integer32 | read-create | The value is to remark when red action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. |
| ROW h3cIfQoSTricolorCarRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.4.2.1.1.14 | RowStatus | read-create | RowStatus. |
| h3cIfQoSTricolorCarRunInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.4.2.2 | not-accessible | A table of tricolor car statistic information. | |
| h3cIfQoSTricolorCarRunInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.4.2.2.1 | not-accessible | Tricolor car statistic information entry. | |
| C64 h3cIfQoSTricolorCarGreenPackets | 1.3.6.1.4.1.2011.10.2.65.1.4.2.2.1.1 | Counter64 | read-only | The number of green packets. |
| C64 h3cIfQoSTricolorCarGreenBytes | 1.3.6.1.4.1.2011.10.2.65.1.4.2.2.1.2 | Counter64 | read-only | The number of green bytes. |
| C64 h3cIfQoSTricolorCarYellowPackets | 1.3.6.1.4.1.2011.10.2.65.1.4.2.2.1.3 | Counter64 | read-only | The number of yellow packets. |
| C64 h3cIfQoSTricolorCarYellowBytes | 1.3.6.1.4.1.2011.10.2.65.1.4.2.2.1.4 | Counter64 | read-only | The number of yellow bytes. |
| C64 h3cIfQoSTricolorCarRedPackets | 1.3.6.1.4.1.2011.10.2.65.1.4.2.2.1.5 | Counter64 | read-only | The number of red packets. |
| C64 h3cIfQoSTricolorCarRedBytes | 1.3.6.1.4.1.2011.10.2.65.1.4.2.2.1.6 | Counter64 | read-only | The number of red bytes. |
| h3cIfQoSGTSObjects | 1.3.6.1.4.1.2011.10.2.65.1.5 | |||
| h3cIfQoSGTSConfigTable | 1.3.6.1.4.1.2011.10.2.65.1.5.1 | not-accessible | A table of generic traffic shaping information. | |
| h3cIfQoSGTSConfigEntry | 1.3.6.1.4.1.2011.10.2.65.1.5.1.1 | not-accessible | Generic traffic shaping information entry. | |
| INT h3cIfQoSGTSClassRuleType | 1.3.6.1.4.1.2011.10.2.65.1.5.1.1.1 | INTEGER | not-accessible | The index of the table, which is the matching type for the packets on interface: ipv4acl, ipv6acl, any, queue. |
| I32 h3cIfQoSGTSClassRuleValue | 1.3.6.1.4.1.2011.10.2.65.1.5.1.1.2 | Integer32 | not-accessible | Value of type. ipv4acl : 2000..4999 ipv6acl : 2000..42767 any : 0 queue : 0..7 |
| U32 h3cIfQoSGTSCir | 1.3.6.1.4.1.2011.10.2.65.1.5.1.1.3 | Unsigned32 | read-create | Committed Information Rate. Unit: kbps. |
| U32 h3cIfQoSGTSCbs | 1.3.6.1.4.1.2011.10.2.65.1.5.1.1.4 | Unsigned32 | read-create | Committed Burst Size. Unit: byte. |
| U32 h3cIfQoSGTSEbs | 1.3.6.1.4.1.2011.10.2.65.1.5.1.1.5 | Unsigned32 | read-create | Excess Burst Size. Unit: byte. |
| I32 h3cIfQoSGTSQueueLength | 1.3.6.1.4.1.2011.10.2.65.1.5.1.1.6 | Integer32 | read-create | The length of queue. |
| ROW h3cIfQoSGTSConfigRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.5.1.1.7 | RowStatus | read-create | RowStatus. |
| h3cIfQoSGTSRunInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.5.2 | not-accessible | A table of generic traffic shaping's statistic information. | |
| h3cIfQoSGTSRunInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.5.2.1 | not-accessible | Generic traffic shaping's statistic information entry. | |
| I32 h3cIfQoSGTSQueueSize | 1.3.6.1.4.1.2011.10.2.65.1.5.2.1.1 | Integer32 | read-only | The number of packets in the queue. |
| C64 h3cIfQoSGTSPassedPackets | 1.3.6.1.4.1.2011.10.2.65.1.5.2.1.2 | Counter64 | read-only | The number of passed packets. |
| C64 h3cIfQoSGTSPassedBytes | 1.3.6.1.4.1.2011.10.2.65.1.5.2.1.3 | Counter64 | read-only | The number of passed bytes. |
| C64 h3cIfQoSGTSDiscardPackets | 1.3.6.1.4.1.2011.10.2.65.1.5.2.1.4 | Counter64 | read-only | The number of discard packets. |
| C64 h3cIfQoSGTSDiscardBytes | 1.3.6.1.4.1.2011.10.2.65.1.5.2.1.5 | Counter64 | read-only | The number of discard bytes. |
| C64 h3cIfQoSGTSDelayedPackets | 1.3.6.1.4.1.2011.10.2.65.1.5.2.1.6 | Counter64 | read-only | The number of delayed packets. |
| C64 h3cIfQoSGTSDelayedBytes | 1.3.6.1.4.1.2011.10.2.65.1.5.2.1.7 | Counter64 | read-only | The number of delayed bytes. |
| h3cIfQoSWREDObjects | 1.3.6.1.4.1.2011.10.2.65.1.6 | |||
| h3cIfQoSWredGroupGroup | 1.3.6.1.4.1.2011.10.2.65.1.6.1 | |||
| I32 h3cIfQoSWredGroupNextIndex | 1.3.6.1.4.1.2011.10.2.65.1.6.1.1 | Integer32 | read-only | This object contains an appropriate value to be used for h3cIfQoSWredGroupIndex when creating rows in the h3cIfQoSWredGroupTable. Begin with 0. |
| h3cIfQoSWredGroupTable | 1.3.6.1.4.1.2011.10.2.65.1.6.1.2 | not-accessible | A table of WRED group information. | |
| h3cIfQoSWredGroupEntry | 1.3.6.1.4.1.2011.10.2.65.1.6.1.2.1 | not-accessible | WRED group information. | |
| I32 h3cIfQoSWredGroupIndex | 1.3.6.1.4.1.2011.10.2.65.1.6.1.2.1.1 | Integer32 | not-accessible | WRED group index. |
| OCT h3cIfQoSWredGroupName | 1.3.6.1.4.1.2011.10.2.65.1.6.1.2.1.2 | OCTET STRING | read-create | WRED group name. |
| INT h3cIfQoSWredGroupType | 1.3.6.1.4.1.2011.10.2.65.1.6.1.2.1.3 | INTEGER | read-create | Type of WRED group. |
| I32 h3cIfQoSWredGroupWeightingConstant | 1.3.6.1.4.1.2011.10.2.65.1.6.1.2.1.4 | Integer32 | read-create | Exponent for WRED calculates the average length of queue. If 'h3cIfQoSWredGroupType' is 'queue', the object is ineffective. So, it must use the object, which is 'h3cIfQoSWredGroupExponent' of h3cIfQoSWredGroupContentTable, to indicate the exponent of each queue of the queue WRED group. |
| ROW h3cIfQoSWredGroupRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.6.1.2.1.6 | RowStatus | read-create | RowStatus. |
| h3cIfQoSWredGroupContentTable | 1.3.6.1.4.1.2011.10.2.65.1.6.1.3 | not-accessible | A table of priority WRED information. | |
| h3cIfQoSWredGroupContentEntry | 1.3.6.1.4.1.2011.10.2.65.1.6.1.3.1 | not-accessible | Priority WRED information entry. | |
| I32 h3cIfQoSWredGroupContentIndex | 1.3.6.1.4.1.2011.10.2.65.1.6.1.3.1.1 | Integer32 | not-accessible | The priority of a packet. Different type of packet has different priority. Type of priority Range of priority dot1p 0..7 ippre 0..7 dscp 0..63 atmclp 0..1 frde 0..1 exp 0..7 queue 0..7 ( defined by product ) dropLevel 0..2 |
| I32 h3cIfQoSWredGroupContentSubIndex | 1.3.6.1.4.1.2011.10.2.65.1.6.1.3.1.2 | Integer32 | not-accessible | The sub index. Different type of packet has different value. Type of priority Range of value queue 0..2 other types : 0 |
| I32 h3cIfQoSWredLowLimit | 1.3.6.1.4.1.2011.10.2.65.1.6.1.3.1.3 | Integer32 | read-create | Discard low limit. |
| I32 h3cIfQoSWredHighLimit | 1.3.6.1.4.1.2011.10.2.65.1.6.1.3.1.4 | Integer32 | read-create | Discard high limit. |
| I32 h3cIfQoSWredDiscardProb | 1.3.6.1.4.1.2011.10.2.65.1.6.1.3.1.5 | Integer32 | read-create | Discard probability. |
| I32 h3cIfQoSWredGroupExponent | 1.3.6.1.4.1.2011.10.2.65.1.6.1.3.1.6 | Integer32 | read-create | Exponent for WRED calculates the average length of queue. Only 'h3cIfQoSWredGroupType' is 'queue', the object is effective. This object is designed to indicate the exponent of each queue of the queue WRED group. |
| ROW h3cIfQoSWredRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.6.1.3.1.7 | RowStatus | read-create | RowStatus. |
| h3cIfQoSWredGroupApplyIfTable | 1.3.6.1.4.1.2011.10.2.65.1.6.1.4 | not-accessible | A table of WRED group applied interface information. | |
| h3cIfQoSWredGroupApplyIfEntry | 1.3.6.1.4.1.2011.10.2.65.1.6.1.4.1 | not-accessible | WRED group applied interface information. | |
| I32 h3cIfQoSWredGroupApplyIndex | 1.3.6.1.4.1.2011.10.2.65.1.6.1.4.1.1 | Integer32 | read-create | WRED group index. |
| OCT h3cIfQoSWredGroupApplyName | 1.3.6.1.4.1.2011.10.2.65.1.6.1.4.1.2 | OCTET STRING | read-only | WRED group name. |
| ROW h3cIfQoSWredGroupIfRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.6.1.4.1.3 | RowStatus | read-create | RowStatus. |
| h3cIfQoSWredApplyIfRunInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.6.1.5 | not-accessible | A table of WRED statistic information. | |
| h3cIfQoSWredApplyIfRunInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.6.1.5.1 | not-accessible | WRED statistic information. | |
| C64 h3cIfQoSWredPreRandomDropNum | 1.3.6.1.4.1.2011.10.2.65.1.6.1.5.1.1 | Counter64 | read-only | The number of random drop. |
| C64 h3cIfQoSWredPreTailDropNum | 1.3.6.1.4.1.2011.10.2.65.1.6.1.5.1.2 | Counter64 | read-only | The number of tail drop. |
| h3cIfQoSPortWredGroup | 1.3.6.1.4.1.2011.10.2.65.1.6.2 | |||
| h3cIfQoSPortWredWeightConstantTable | 1.3.6.1.4.1.2011.10.2.65.1.6.2.1 | not-accessible | A table of port WRED configuration information. | |
| h3cIfQoSPortWredWeightConstantEntry | 1.3.6.1.4.1.2011.10.2.65.1.6.2.1.1 | not-accessible | Port WRED configuration information entry. | |
| T/F h3cIfQoSPortWredEnable | 1.3.6.1.4.1.2011.10.2.65.1.6.2.1.1.1 | TruthValue | read-create | The object is used to enable or disable WRED function of the port. true: Enable WRED function of a port. false: Disable WRED function of a port. |
| I32 h3cIfQoSPortWredWeightConstant | 1.3.6.1.4.1.2011.10.2.65.1.6.2.1.1.2 | Integer32 | read-create | Weight constant. |
| ROW h3cIfQoSPortWredWeightConstantRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.6.2.1.1.3 | RowStatus | read-create | RowStatus. |
| h3cIfQoSPortWredPreConfigTable | 1.3.6.1.4.1.2011.10.2.65.1.6.2.2 | not-accessible | A table of weighted random early detect precedence configuration information. | |
| h3cIfQoSPortWredPreConfigEntry | 1.3.6.1.4.1.2011.10.2.65.1.6.2.2.1 | not-accessible | Weighted random early detect precedence configuration information entry. | |
| I32 h3cIfQoSPortWredPreID | 1.3.6.1.4.1.2011.10.2.65.1.6.2.2.1.1 | Integer32 | not-accessible | IP precedence, from 0 to 7. |
| I32 h3cIfQoSPortWredPreLowLimit | 1.3.6.1.4.1.2011.10.2.65.1.6.2.2.1.2 | Integer32 | read-create | Low Limit(number of packets) |
| I32 h3cIfQoSPortWredPreHighLimit | 1.3.6.1.4.1.2011.10.2.65.1.6.2.2.1.3 | Integer32 | read-create | High limit(number of packets) |
| I32 h3cIfQoSPortWredPreDiscardProbability | 1.3.6.1.4.1.2011.10.2.65.1.6.2.2.1.4 | Integer32 | read-create | Discard probability denominator |
| ROW h3cIfQoSPortWredPreRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.6.2.2.1.5 | RowStatus | read-create | RowStatus. |
| h3cIfQoSPortWredRunInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.6.2.3 | not-accessible | A table of WRED statistic information. | |
| h3cIfQoSPortWredRunInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.6.2.3.1 | not-accessible | WRED statistic information entry. | |
| C64 h3cIfQoSWREDTailDropNum | 1.3.6.1.4.1.2011.10.2.65.1.6.2.3.1.1 | Counter64 | read-only | The number of tail drop. |
| C64 h3cIfQoSWREDRandomDropNum | 1.3.6.1.4.1.2011.10.2.65.1.6.2.3.1.2 | Counter64 | read-only | The number of random drop. |
| h3cIfQoSPortPriorityObjects | 1.3.6.1.4.1.2011.10.2.65.1.7 | |||
| h3cIfQoSPortPriorityConfigGroup | 1.3.6.1.4.1.2011.10.2.65.1.7.1 | |||
| h3cIfQoSPortPriorityTable | 1.3.6.1.4.1.2011.10.2.65.1.7.1.1 | not-accessible | A table of priority of port information. | |
| h3cIfQoSPortPriorityEntry | 1.3.6.1.4.1.2011.10.2.65.1.7.1.1.1 | not-accessible | The priority of port information entry. | |
| I32 h3cIfQoSPortPriorityValue | 1.3.6.1.4.1.2011.10.2.65.1.7.1.1.1.1 | Integer32 | read-write | The priority of port. |
| h3cIfQoSPortPirorityTrustTable | 1.3.6.1.4.1.2011.10.2.65.1.7.1.2 | not-accessible | A table of the trust-priority of port information. | |
| h3cIfQoSPortPirorityTrustEntry | 1.3.6.1.4.1.2011.10.2.65.1.7.1.2.1 | not-accessible | Trust-priority of port information entry. | |
| INT h3cIfQoSPortPriorityTrustTrustType | 1.3.6.1.4.1.2011.10.2.65.1.7.1.2.1.1 | INTEGER | read-write | The trust type of port. |
| INT h3cIfQoSPortPriorityTrustOvercastType | 1.3.6.1.4.1.2011.10.2.65.1.7.1.2.1.2 | INTEGER | read-write | The overcast type. |
| h3cIfQoSMapObjects | 1.3.6.1.4.1.2011.10.2.65.1.9 | |||
| h3cIfQoSPriMapConfigGroup | 1.3.6.1.4.1.2011.10.2.65.1.9.1 | |||
| I32 h3cIfQoSPriMapGroupNextIndex | 1.3.6.1.4.1.2011.10.2.65.1.9.1.1 | Integer32 | read-only | This object contains an appropriate value to be used for h3cIfQoSPriMapGroupIndex when creating rows in the h3cIfQoSPriMapGroupTable. Begin with 64. |
| h3cIfQoSPriMapGroupTable | 1.3.6.1.4.1.2011.10.2.65.1.9.1.2 | not-accessible | A table of map group information. | |
| h3cIfQoSPriMapGroupEntry | 1.3.6.1.4.1.2011.10.2.65.1.9.1.2.1 | not-accessible | Map group information entry. | |
| I32 h3cIfQoSPriMapGroupIndex | 1.3.6.1.4.1.2011.10.2.65.1.9.1.2.1.1 | Integer32 | not-accessible | The index of map, which are defined by system and user. The index of system defined map is 1 to 9. System defined map-name/map-index pairs like this: Map-index Map-name 1 dot1p-dp 2 dot1p-dscp 3 dot1p-lp 4 dscp-dot1p 5 dscp-dp 6 dscp-dscp 7 dscp-lp 8 exp-dp 9 exp-lp |
| INT h3cIfQoSPriMapGroupType | 1.3.6.1.4.1.2011.10.2.65.1.9.1.2.1.2 | INTEGER | read-create | The type of map group. |
| OCT h3cIfQoSPriMapGroupName | 1.3.6.1.4.1.2011.10.2.65.1.9.1.2.1.3 | OCTET STRING | read-create | The name of map group. |
| ROW h3cIfQoSPriMapGroupRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.9.1.2.1.4 | RowStatus | read-create | RowStatus. |
| h3cIfQoSPriMapContentTable | 1.3.6.1.4.1.2011.10.2.65.1.9.1.3 | not-accessible | A table of priority map configuration information. | |
| h3cIfQoSPriMapContentEntry | 1.3.6.1.4.1.2011.10.2.65.1.9.1.3.1 | not-accessible | Priority map configuration information entry. | |
| I32 h3cIfQoSPriMapGroupImportValue | 1.3.6.1.4.1.2011.10.2.65.1.9.1.3.1.1 | Integer32 | not-accessible | Priority map table import value list. Different map has different h3cIfQoSPriMapConfigImportValue. Map-name Range of h3cIfQoSPriMapConfigImportValue dot1p-dp (0..7) dot1p-dscp (0..7) dot1p-lp (0..7) dscp-dot1p (0..63) dscp-dp (0..63) dscp-dscp (0..63) dscp-lp(7) (0..63) exp-dp(8) (0..7) exp-lp (0..7) |
| I32 h3cIfQoSPriMapGroupExportValue | 1.3.6.1.4.1.2011.10.2.65.1.9.1.3.1.2 | Integer32 | read-create | Priority map table output. Different map has different h3cIfQoSPriMapGroupExportValue. dot1p-dp: 0..7 dot1p-dscp: 0..63 dot1p-lp: 0..7 dscp-dot1p: 0..7 dscp-dp: 0..7 dscp-dscp: 0..63 dscp-lp: 0..7 exp-dp: 0..7 exp-lp: 0..7 |
| ROW h3cIfQoSPriMapContentRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.9.1.3.1.3 | RowStatus | read-create | RowStatus. |
| h3cIfQoSL3PlusObjects | 1.3.6.1.4.1.2011.10.2.65.1.10 | |||
| h3cIfQoSPortBindingGroup | 1.3.6.1.4.1.2011.10.2.65.1.10.1 | |||
| h3cIfQoSPortBindingTable | 1.3.6.1.4.1.2011.10.2.65.1.10.1.1 | not-accessible | A table of EACL sub-interface binding information for L3+ board . | |
| h3cIfQoSPortBindingEntry | 1.3.6.1.4.1.2011.10.2.65.1.10.1.1.1 | not-accessible | Binding information entry. | |
| I32 h3cIfQoSBindingIf | 1.3.6.1.4.1.2011.10.2.65.1.10.1.1.1.1 | Integer32 | read-create | The binding interface. |
| ROW h3cIfQoSBindingRowStatus | 1.3.6.1.4.1.2011.10.2.65.1.10.1.1.1.2 | RowStatus | read-create | RowStatus |
| h3cQoSTraStaObjects | 1.3.6.1.4.1.2011.10.2.65.1.11 | |||
| h3cQoSTraStaConfigGroup | 1.3.6.1.4.1.2011.10.2.65.1.11.1 | |||
| h3cQoSIfTraStaConfigInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.11.1.1 | not-accessible | A table of traffic statistics configuration information. | |
| h3cQoSIfTraStaConfigInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.11.1.1.1 | not-accessible | An entry of interface traffic statistics configuration information. | |
| DIR h3cQoSIfTraStaConfigDirection | 1.3.6.1.4.1.2011.10.2.65.1.11.1.1.1.1 | Direction | not-accessible | The direction of the traffic statistics. |
| OCT h3cQoSIfTraStaConfigQueue | 1.3.6.1.4.1.2011.10.2.65.1.11.1.1.1.2 | OCTET STRING | read-create | The bitmap of Queue ID. The octet specifies queues 0 through 7. If a bit has a value of '1', the corresponding queue is configured in the set of Queues; if a bit has a value of '0', the corresponding queue is not configured. |
| OCT h3cQoSIfTraStaConfigDot1p | 1.3.6.1.4.1.2011.10.2.65.1.11.1.1.1.3 | OCTET STRING | read-create | The bitmap of Dot1p value. The octet specifies Dot1p values 0 through 7. If a bit has a value of '1', the corresponding Dot1p value is configured in the set of Dot1p values; if a bit has a value of '0', the corresponding Dot1p value is not configured. |
| OCT h3cQoSIfTraStaConfigDscp | 1.3.6.1.4.1.2011.10.2.65.1.11.1.1.1.4 | OCTET STRING | read-create | The bitmap of Dscp value. Each octet within this value specifies a set of eight Dscp values, with the first octet specifying Dscp values 0 through 7, the second octet specifying Dscp values 8 through 15, etc. If a bit has a value of '1', the corresponding Dscp value is configured in the set of Dscp values; if a bit has a value of '0', the corresponding Dscp value is not configured. |
| OCT h3cQoSIfTraStaConfigVlan | 1.3.6.1.4.1.2011.10.2.65.1.11.1.1.1.5 | OCTET STRING | read-create | The bitmap of VLAN ID. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 0 through 7, the second octet specifying VLANs 8 through 15, etc. If a bit has a value of '1', the corresponding VLAN is configured in the set of VLANs; if a bit has a value of '0', the corresponding VLAN is not configured. |
| ROW h3cQoSIfTraStaConfigStatus | 1.3.6.1.4.1.2011.10.2.65.1.11.1.1.1.6 | RowStatus | read-create | The row status of this table entry. |
| h3cQoSTraStaRunGroup | 1.3.6.1.4.1.2011.10.2.65.1.11.2 | |||
| h3cQoSIfTraStaRunInfoTable | 1.3.6.1.4.1.2011.10.2.65.1.11.2.1 | not-accessible | A table of traffic statistics running information. | |
| h3cQoSIfTraStaRunInfoEntry | 1.3.6.1.4.1.2011.10.2.65.1.11.2.1.1 | not-accessible | An entry of interface traffic statistics running information. | |
| INT h3cQoSIfTraStaRunObjectType | 1.3.6.1.4.1.2011.10.2.65.1.11.2.1.1.1 | INTEGER | not-accessible | Type of statistics object. |
| I32 h3cQoSIfTraStaRunObjectValue | 1.3.6.1.4.1.2011.10.2.65.1.11.2.1.1.2 | Integer32 | not-accessible | Value range for the object type: for Queue: 0~7 for Dot1p: 0~7 for Dscp: 0~63 for VlanID: 1~4094 |
| DIR h3cQoSIfTraStaRunDirection | 1.3.6.1.4.1.2011.10.2.65.1.11.2.1.1.3 | Direction | not-accessible | The direction of the traffic statistics. |
| C64 h3cQoSIfTraStaRunPassPackets | 1.3.6.1.4.1.2011.10.2.65.1.11.2.1.1.4 | Counter64 | read-only | Number of passed packets. |
| C64 h3cQoSIfTraStaRunDropPackets | 1.3.6.1.4.1.2011.10.2.65.1.11.2.1.1.5 | Counter64 | read-only | Number of dropped packets. |
| C64 h3cQoSIfTraStaRunPassBytes | 1.3.6.1.4.1.2011.10.2.65.1.11.2.1.1.6 | Counter64 | read-only | Number of passed bytes. |
| C64 h3cQoSIfTraStaRunDropBytes | 1.3.6.1.4.1.2011.10.2.65.1.11.2.1.1.7 | Counter64 | read-only | Number of dropped bytes. |
| C64 h3cQoSIfTraStaRunPassPPS | 1.3.6.1.4.1.2011.10.2.65.1.11.2.1.1.8 | Counter64 | read-only | PPS (packets per second) of passed packets. |
| C64 h3cQoSIfTraStaRunPassBPS | 1.3.6.1.4.1.2011.10.2.65.1.11.2.1.1.9 | Counter64 | read-only | BPS (bytes per second) of passed packets. |
RFC description
H3C/Huawei vendor MIB for interface quality-of-service (QoS) v2 management on switches and routers.
Start monitoring H3C switch/router (per-interface QoS queuing/scheduling, v2) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.