ASCEND-MIBATALK-MIB

All MIBs › ASCEND-MIBATALK-MIB

Category: SNA and Legacy Protocols, Vendor: Ascend/Lucent

Description: Manages AppleTalk routing and zone configuration on Ascend multi-protocol access equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCEND-MIBATALK-MIB?

ASCEND-MIBATALK-MIB is a vendor-specific MIB for Ascend (later Lucent/Avaya) multi-protocol WAN access equipment, covering AppleTalk routing and zone configuration. It exposes objects for configuring and monitoring AppleTalk network numbers, zones, and routing behavior on the device's interfaces, reflecting an era when Ascend routers bridged/routed multiple legacy protocols alongside IP. Its monitoring relevance is primarily configuration/software status rather than hardware health: it would let an administrator confirm AppleTalk routing is active and correctly zoned on a given interface, and detect routing table or zone-information inconsistencies. No sample objects or module description text were available in this source excerpt, so specific object or table names cannot be confirmed here. It is a legacy protocol MIB, typically found in older enterprise networks that still carried AppleTalk traffic alongside IP through Ascend routers, and administrators can load the ASCEND-MIBATALK-MIB MIB Browser file to inspect its object definitions directly.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-MIBATALK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ascend multi-protocol WAN access router

Monitoring Examples

No sample_objects or module_desc text was provided in the source data for this MIB, so no specific object or table names, nor a grounded monitoring scenario, can be responsibly constructed here. In general terms, an AppleTalk routing MIB of this kind would typically expose per-interface network number/zone configuration and a routing table, similar to the standard AppleTalk MIB (RFC 1742). Without confirmed object names this cannot be stated as fact for this specific module.

What Can Be Monitored

AppleTalk zone configuration
AppleTalk routing status

Imported Objects

From ASCEND-MIB

configuration

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
mibatalkInterfaceProfile	1.3.6.1.4.1.529.23.35
mibatalkInterfaceProfileTable	1.3.6.1.4.1.529.23.35.1		not-accessible	A list of mibatalkInterfaceProfile profile entries.
mibatalkInterfaceProfileEntry	1.3.6.1.4.1.529.23.35.1.1		not-accessible	A mibatalkInterfaceProfile entry containing objects that maps to the parameters of mibatalkInterfaceProfile profile.
INT atalkInterfaceProfile_Shelf_o	1.3.6.1.4.1.529.23.35.1.1.1	INTEGER	read-only
INT atalkInterfaceProfile_Slot_o	1.3.6.1.4.1.529.23.35.1.1.2	INTEGER	read-only
INT atalkInterfaceProfile_Item_o	1.3.6.1.4.1.529.23.35.1.1.3	INTEGER	read-only
INT atalkInterfaceProfile_LogicalItem_o	1.3.6.1.4.1.529.23.35.1.1.4	INTEGER	read-only
INT atalkInterfaceProfile_InterfaceAddress_PhysicalAddress_Shelf	1.3.6.1.4.1.529.23.35.1.1.5	INTEGER	read-write	The number of the shelf that the addressed physical device resides on.
INT atalkInterfaceProfile_InterfaceAddress_PhysicalAddress_Slot	1.3.6.1.4.1.529.23.35.1.1.6	INTEGER	read-write	The number of the slot that the addressed physical device resides on.
INT atalkInterfaceProfile_InterfaceAddress_PhysicalAddress_ItemNumber	1.3.6.1.4.1.529.23.35.1.1.7	INTEGER	read-write	A number that specifies an addressable entity within the context of shelf and slot.
INT atalkInterfaceProfile_InterfaceAddress_LogicalItem	1.3.6.1.4.1.529.23.35.1.1.8	INTEGER	read-write	A number that specifies an addressable logical entity within the context of a physical address.
INT atalkInterfaceProfile_AtalkRoutingEnabled	1.3.6.1.4.1.529.23.35.1.1.9	INTEGER	read-write	Allow Appletalk routing and ARA connections.
STR atalkInterfaceProfile_HintZone	1.3.6.1.4.1.529.23.35.1.1.10	DisplayString	read-write	The default zone that the MAX will come up in.
INT atalkInterfaceProfile_AtalkRouter	1.3.6.1.4.1.529.23.35.1.1.11	INTEGER	read-write	The type of AppleTalk Router to enable.
INT atalkInterfaceProfile_AtalkNetStart	1.3.6.1.4.1.529.23.35.1.1.12	INTEGER	read-write	The start of the AppleTalk Net number range.
INT atalkInterfaceProfile_AtalkNetEnd	1.3.6.1.4.1.529.23.35.1.1.13	INTEGER	read-write	The end of the AppleTalk Net number range.
INT atalkInterfaceProfile_Action_o	1.3.6.1.4.1.529.23.35.1.1.14	INTEGER	read-write
mibatalkInterfaceProfile_AtalkZoneListTable	1.3.6.1.4.1.529.23.35.2		not-accessible	A list of mibatalkInterfaceProfile__atalk_Zone_List profile entries.
mibatalkInterfaceProfile_AtalkZoneListEntry	1.3.6.1.4.1.529.23.35.2.1		not-accessible	A mibatalkInterfaceProfile__atalk_Zone_List entry containing objects that maps to the parameters of mibatalkInterfaceProfile__atalk_Zone_List profile.
INT atalkInterfaceProfile_AtalkZoneList_Shelf_o	1.3.6.1.4.1.529.23.35.2.1.1	INTEGER	read-only
INT atalkInterfaceProfile_AtalkZoneList_Slot_o	1.3.6.1.4.1.529.23.35.2.1.2	INTEGER	read-only
INT atalkInterfaceProfile_AtalkZoneList_Item_o	1.3.6.1.4.1.529.23.35.2.1.3	INTEGER	read-only
INT atalkInterfaceProfile_AtalkZoneList_LogicalItem_o	1.3.6.1.4.1.529.23.35.2.1.4	INTEGER	read-only
INT atalkInterfaceProfile_AtalkZoneList_Index_o	1.3.6.1.4.1.529.23.35.2.1.5	INTEGER	read-only
STR atalkInterfaceProfile_AtalkZoneList	1.3.6.1.4.1.529.23.35.2.1.6	DisplayString	read-write	The Zone List for an AppleTalk seed router.
mibatalkGlobalProfile	1.3.6.1.4.1.529.23.36
mibatalkGlobalProfileTable	1.3.6.1.4.1.529.23.36.1		not-accessible	A list of mibatalkGlobalProfile profile entries.
mibatalkGlobalProfileEntry	1.3.6.1.4.1.529.23.36.1.1		not-accessible	A mibatalkGlobalProfile entry containing objects that maps to the parameters of mibatalkGlobalProfile profile.
INT atalkGlobalProfile_Index_o	1.3.6.1.4.1.529.23.36.1.1.1	INTEGER	read-only
INT atalkGlobalProfile_AtalkDialinPoolStart	1.3.6.1.4.1.529.23.36.1.1.2	INTEGER	read-write	The Net range start of the dialin pool shared by the wan interfaces.
INT atalkGlobalProfile_AtalkDialinPoolEnd	1.3.6.1.4.1.529.23.36.1.1.3	INTEGER	read-write	The Net range end of the dialin pool shared by the wan interfaces.
INT atalkGlobalProfile_Action_o	1.3.6.1.4.1.529.23.36.1.1.4	INTEGER	read-write

RFC description

Configures AppleTalk support on Ascend access servers, managing global and interface-specific AppleTalk dial-in pool parameters.

Start monitoring Ascend Communications (Lucent) MAX/Pipeline/TNT WAN access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCEND-MIBATALK-MIB

What Is ASCEND-MIBATALK-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description