ARUBAWIRED-PROVIDER-BRIDGE-MIB

All MIBs › ARUBAWIRED-PROVIDER-BRIDGE-MIB

Organization: HPE/Aruba Networking Division

Last Updated: 2021-11-12

Category: VLAN and Bridging, Vendor: Aruba

Description: Manages IEEE 802.1ad provider bridge (QinQ) VLAN stacking on Aruba CX switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ARUBAWIRED-PROVIDER-BRIDGE-MIB?

ARUBAWIRED-PROVIDER-BRIDGE-MIB is an HPE/Aruba Networking Division proprietary MIB extending the standard Provider Bridge MIB. Its objects cover a global provider-bridge type and EtherType, a VLAN-type table (VLAN ID, type), and a port table (ifIndex, port type). As a configuration MIB it lets an administrator confirm S-VLAN/C-VLAN tagging type and provider-bridge port roles on an Aruba (HPE) wired switch. It is deployed on HPE/Aruba Networking wired switching equipment (Provider Bridge). Engineers can download the ARUBAWIRED-PROVIDER-BRIDGE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ARUBAWIRED-PROVIDER-BRIDGE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HPE/Aruba Networking wired switching equipment (Provider Bridge)

Monitoring Examples

An administrator checks arubaWiredProviderBridgePortType to confirm a port's provider-bridge role (customer/provider edge) on an Aruba (HPE) wired switch.

What Can Be Monitored

provider-bridge VLAN tagging and port-role configuration

Imported Objects

From ARUBAWIRED-NETWORKING-OID

wndFeatures

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From Q-BRIDGE-MIB

VlanId

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
arubaWiredProviderBridgeMIB	1.3.6.1.4.1.47196.4.1.1.3.23			This MIB module contains the HPE 'version' of the standard Provider Bridge MIB and the proprietary extensions to it.
arubaWiredProviderBridgeNotifications	1.3.6.1.4.1.47196.4.1.1.3.23.0
arubaWiredProviderBridgeObjects	1.3.6.1.4.1.47196.4.1.1.3.23.1
arubaWiredProviderBridgeBase	1.3.6.1.4.1.47196.4.1.1.3.23.1.0
INT arubaWiredProviderBridgeType	1.3.6.1.4.1.47196.4.1.1.3.23.1.0.1	INTEGER	read-only	arubaWiredProviderBridgeType controls bridge mode configuration. A device can function in one of the 4 modes defined above. vlanBridge - provider bridge feature disabled mode, all VLANs are cvlans. svlanBridge - provider bridge mode with only svlans. providerEdgeBridge - provider bridge mode with cvlans and svlans and mappings between them. vlanSvlanBridge - provider bridge mode with independent cvlans and svlans on the same device. Changing from one mode to another will empty out the current configuration information and reboot the device.
I32 arubaWiredProviderBridgeEtherType	1.3.6.1.4.1.47196.4.1.1.3.23.1.0.2	Integer32	read-only	Defines the 2-byte ethertype for provider tagged frames. The default is 0x88a8. Changing from one tag-type to another with a given arubaWiredProviderBridgeType configuration will save current configurations and reboot the device, the new tag-type will take effect subsequently.
arubaWiredProviderBridgeVlanTypeTable	1.3.6.1.4.1.47196.4.1.1.3.23.1.0.3		not-accessible	HPE proprietary table to classify a VLAN as a cvlan or an svlan
arubaWiredProviderBridgeVlanTypeEntry	1.3.6.1.4.1.47196.4.1.1.3.23.1.0.3.1		not-accessible	An entry for HPE Specific extension table
VLA arubaWiredProviderBridgeVlanTypeVlanID	1.3.6.1.4.1.47196.4.1.1.3.23.1.0.3.1.1	VlanId	not-accessible	The VLAN ID to which this entry belongs.
INT arubaWiredProviderBridgeVlanType	1.3.6.1.4.1.47196.4.1.1.3.23.1.0.3.1.2	INTEGER	read-only	Indicates the VLANtype.
arubaWiredProviderBridgePortTable	1.3.6.1.4.1.47196.4.1.1.3.23.1.0.4		not-accessible	This specifies the designated type of an externally accessible port on a Provider Bridge.
arubaWiredProviderBridgePortEntry	1.3.6.1.4.1.47196.4.1.1.3.23.1.0.4.1		not-accessible	An entry that specifies the designated type of an externally accessible port on a Provider Bridge.
NUM arubaWiredProviderBridgePortifIndex	1.3.6.1.4.1.47196.4.1.1.3.23.1.0.4.1.1	InterfaceIndex	not-accessible	The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
INT arubaWiredProviderBridgePortType	1.3.6.1.4.1.47196.4.1.1.3.23.1.0.4.1.2	INTEGER	read-only	The type of an externally accessible port on a Provider Bridge. A customer-edge port is a C-VLAN component Port on a Provider Edge Bridge that is connected to customer owned equipment and receives and transmits frames for a single customer. Designating a port as a Customer Edge Port implies Provider Edge Bridge functionality and, specifically, the existence of a C-VLAN component associated with that port. This C-VLAN component is uniquely identified within the Bridge by the port number of the associated Customer Edge Port. A customer-network port is an S-VLAN component Port on a Provider Bridge or within a Provider Edge Bridge that receives and transmits frame for a single customer. A provider-network port is an S-VLAN component Port on a Provider Bridge that can transmit and receive frames for multiple customers.
arubaWiredProviderBridgeConformance	1.3.6.1.4.1.47196.4.1.1.3.23.2
arubaWiredProviderBridgeCompliances	1.3.6.1.4.1.47196.4.1.1.3.23.2.1
arubaWiredProviderBridgeCompliance	1.3.6.1.4.1.47196.4.1.1.3.23.2.1.1			The compliance statement for HPE Switches with IEEE standard Provider Bridge MIBs.
arubaWiredProviderBridgeGroups	1.3.6.1.4.1.47196.4.1.1.3.23.2.2
arubaWiredProviderBridgeBaseGroup	1.3.6.1.4.1.47196.4.1.1.3.23.2.2.1			Basic Provider Bridge configuration information.

RFC description

HPE Aruba Networking SNMP MIB for provider bridge functionality in wired switches. Manages VLAN configurations and provider bridge port settings in AOS-CX network devices.

Start monitoring Aruba (HPE) ArubaOS-CX wired switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ARUBAWIRED-PROVIDER-BRIDGE-MIB

What Is ARUBAWIRED-PROVIDER-BRIDGE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description