ARRIS-D5-VIDEO-ERM-MIB

All MIBs › ARRIS-D5-VIDEO-ERM-MIB

Organization: Arris Group

Last Updated: 2007-11-08

Category: DOCSIS and Cable, Vendor: ARRIS

Description: ARRIS D5 video edge resource manager configuration for stream routing and grooming.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ARRIS-D5-VIDEO-ERM-MIB?

ARRIS-D5-VIDEO-ERM-MIB is a vendor-specific module for the ARRIS D5 platform, a converged cable access/video edge device, managing the Edge Resource Manager (ERM) software responsible for video stream routing and grooming. It exposes configuration-oriented data about ERM components, streaming zones, and per-instance connection parameters such as local/remote IP addressing and VREP port, alongside operational thresholds like hold time and bandwidth interval/threshold. While primarily a configuration MIB, its bandwidth threshold and hold-time objects also let an operator monitor the software-level health of the ERM process, e.g. whether a stream-routing session is within configured bandwidth limits or has stalled. It is a component-specific extension to the broader ARRIS D5 MIB family rather than a standards-based MIB. It is deployed in cable operator headends or hubs where the ARRIS D5 platform provides video edge/QAM and CCAP functionality. Engineers can download the ARRIS-D5-VIDEO-ERM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ARRIS-D5-VIDEO-ERM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ARRIS D5 video edge/CCAP platform

Monitoring Examples

An operator would walk d5ErmTable (via d5ErmEntry, keyed effectively by d5ErmName) to see each ERM instance's d5ErmDescription, d5ErmLocalIpAddress, and d5ErmRemoteIpName, confirming that video stream routing peers are correctly paired. Watching d5ErmBwInterval and d5ErmBwThreshold reveals whether a streaming zone (d5ErmStreamingZone) is approaching its configured bandwidth ceiling, an early sign of video service degradation. A d5ErmHoldTime that repeatedly expires could indicate a stalled remote connection via d5ErmRemoteIpName.

What Can Be Monitored

ERM component name and description
streaming zone assignment
local/remote IP addressing per ERM entry
VREP port
hold time
bandwidth interval and threshold

Imported Objects

From ARRIS-MIB

arrisD5UEQam

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
arrisD5UEQamErmMib	1.3.6.1.4.1.4115.1.8.1.11			This MIB manages the erm software on the ARRIS D5 product
arrisD5UEQamErmGroup	1.3.6.1.4.1.4115.1.8.1.11.1			A collection of objects providing system erm configuration.
STR d5ErmComponentName	1.3.6.1.4.1.4115.1.8.1.11.1.1	DisplayString	read-write	Sets component name advertised during VREP OPEN.
STR d5ErmStreamingZone	1.3.6.1.4.1.4115.1.8.1.11.1.2	DisplayString	read-write	Sets streaming zone that ERM/ED are configured in.
d5ErmTable	1.3.6.1.4.1.4115.1.8.1.11.2		not-accessible	This table describes the configuration parameters associated with remote Edge Resource Manager (ERM) devices. Use of multiple entries within this table enables the logical separation of the D5 to multiple ERMs.
d5ErmEntry	1.3.6.1.4.1.4115.1.8.1.11.2.1		not-accessible	An entry corresponds to an individual ERM configuration.
STR d5ErmName	1.3.6.1.4.1.4115.1.8.1.11.2.1.1	DisplayString	read-write	Name of ERM configuration entry.
STR d5ErmDescription	1.3.6.1.4.1.4115.1.8.1.11.2.1.2	DisplayString	read-write	Contains text description of the ERM configuration.
IP d5ErmLocalIpAddress	1.3.6.1.4.1.4115.1.8.1.11.2.1.3	InetAddress	read-write	Local IP address to use for DRRP/VREP and RTSP connections.
STR d5ErmRemoteIpName	1.3.6.1.4.1.4115.1.8.1.11.2.1.4	DisplayString	read-write	A comma seperated list of up to three remote addresses. The first entry in the list is the primary remote erm address. Subsequent values are the secondary remote erm addresses. An IPV4 address or hostname is acceptable for each value.
I32 d5ErmVrepPort	1.3.6.1.4.1.4115.1.8.1.11.2.1.5	Integer32	read-write	Contains TCP port value used for DRRP listener/connections.
U32 d5ErmHoldTime	1.3.6.1.4.1.4115.1.8.1.11.2.1.6	Unsigned32	read-write	Contains VREP/DRRP hold-time for connection timeout.
U32 d5ErmBwInterval	1.3.6.1.4.1.4115.1.8.1.11.2.1.7	Unsigned32	read-write	Interval to send AvailableBandwidth UDPATE messages.
U32 d5ErmBwThreshold	1.3.6.1.4.1.4115.1.8.1.11.2.1.8	Unsigned32	read-write	Change in bandwith utilisation required to trigger an AvailableBandwidth UDPATE messages.
U32 d5ErmCost	1.3.6.1.4.1.4115.1.8.1.11.2.1.9	Unsigned32	read-write	Cost to advertise in VREP OPEN message.
I32 d5ErmRtspPort	1.3.6.1.4.1.4115.1.8.1.11.2.1.10	Integer32	read-write	Contains TCP port value used for incoming RTSP connections.
I32 d5ErmRtspConnectionTimeout	1.3.6.1.4.1.4115.1.8.1.11.2.1.11	Integer32	read-write	RTSP Connection timeout.
I32 d5ErmRtspMessageTimeout	1.3.6.1.4.1.4115.1.8.1.11.2.1.12	Integer32	read-write	RTSP Message timeout.
I32 d5ErmRtspSessionTimeout	1.3.6.1.4.1.4115.1.8.1.11.2.1.13	Integer32	read-write	RTSP Session timeout.
INT d5ErmAdminStatus	1.3.6.1.4.1.4115.1.8.1.11.2.1.14	INTEGER	read-write	The desired state of the interface. The shuttingDown(3) state indicates that the ERM interface is transitioning from up(1) to down(2), but the system is waiting for the resources to be withdrawn from the ERM.
INT d5ErmVrepStatus	1.3.6.1.4.1.4115.1.8.1.11.2.1.15	INTEGER	read-only	The current state of the VREP state machine.
U32 d5ErmVrepConnRetryTimeout	1.3.6.1.4.1.4115.1.8.1.11.2.1.16	Unsigned32	read-write	The current state of the RTSP server.
INT d5ErmRtspStatus	1.3.6.1.4.1.4115.1.8.1.11.2.1.17	INTEGER	read-only	The current state of the RTSP server.
ROW d5ErmRowStatus	1.3.6.1.4.1.4115.1.8.1.11.2.1.18	RowStatus	read-create	The values that control the creation/deletion of ERMs on the D5.
d5ErmSubIfTable	1.3.6.1.4.1.4115.1.8.1.11.3		not-accessible	Table used for binding primary subinterfaces to an ERM interface
d5ErmSubIfEntry	1.3.6.1.4.1.4115.1.8.1.11.3.1		not-accessible
OCT d5ErmSubIfErmName	1.3.6.1.4.1.4115.1.8.1.11.3.1.1	OCTET STRING	read-create	name of configured ERM that this ethernet is available to
OCT d5ErmSubIfEigName	1.3.6.1.4.1.4115.1.8.1.11.3.1.2	OCTET STRING	read-create	name of Edge Input Group name for this interface
ROW d5ErmSubIfRowStatus	1.3.6.1.4.1.4115.1.8.1.11.3.1.3	RowStatus	read-create	The values that control the creation/deletion of entries in the d5ErmSubIfTable

RFC description

Arris D5 Edge QAM SNMP MIB for video and edge resource management, providing monitoring and configuration objects for Arris D5 cable headend equipment.

Start monitoring ARRIS D5 Universal Edge QAM (UEQ) (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ARRIS-D5-VIDEO-ERM-MIB

What Is ARRIS-D5-VIDEO-ERM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description