ARRIS-D5-DVB-PSIG-MIB

All MIBs › ARRIS-D5-DVB-PSIG-MIB

Organization: Arris International

Last Updated: 2010-02-24

Category: DOCSIS and Cable, Vendor: ARRIS

Description: ARRIS D5 DVB PSI/SI generator configuration for digital broadcast signaling tables.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ARRIS-D5-DVB-PSIG-MIB?

This is an ARRIS enterprise MIB for the D5 platform's DVB PSI/SI Generator (PSIG) interface, which manages Program Specific Information/Service Information tables used in digital video broadcast signaling. It exposes configuration for the PSIG software component running on the Arris D5 WAN interface, governing how PSI/SI signaling tables are generated and inserted into the outbound transport stream. Its monitoring value lies in confirming the software health of the signaling-table generation process, verifying the PSIG process is running and correctly configured, since failures here cause set-top boxes to lose channel/service mapping information. It is presumably used alongside ARRIS's broader D5 QAM and edge-QAM MIBs for a complete digital video delivery monitoring picture. It's typically deployed on ARRIS D5 Universal Edge QAM devices in cable/telco video headends generating DVB signaling for digital broadcast services. Engineers can download the ARRIS-D5-DVB-PSIG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ARRIS-D5-DVB-PSIG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ARRIS D5 Universal Edge QAM (UEQ) device

Monitoring Examples

A video operations engineer would check the PSIG configuration/status on the Arris D5 to confirm PSI/SI tables are actively being generated and inserted correctly into the QAM output stream. If subscribers report missing channels in their set-top guide, verifying the PSIG process status would help determine whether a signaling-table generation fault, rather than a QAM RF issue, is the cause. No sample object names were available for this module to cite directly.

What Can Be Monitored

PSI/SI table generation status
PSIG interface configuration
DVB signaling process health

Imported Objects

From ARRIS-MIB

arrisD5UEQam

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
d5DvbCasPsigMuxMib	1.3.6.1.4.1.4115.1.8.1.9			This MIB manages the PSIG interface software on the Arris D5 WAN.
d5DvbCasPsigMuxObjects	1.3.6.1.4.1.4115.1.8.1.9.1
d5DvbCasPsigTable	1.3.6.1.4.1.4115.1.8.1.9.1.1		not-accessible	This table stores the PSIG interfaces on the MUX(D5)
d5DvbCasPsigEntry	1.3.6.1.4.1.4115.1.8.1.9.1.1.1		not-accessible
STR d5PsigName	1.3.6.1.4.1.4115.1.8.1.9.1.1.1.1	DisplayString	read-create	DVB psig name to be used to identify psig locally.
U32 d5PsigTcpPort	1.3.6.1.4.1.4115.1.8.1.9.1.1.1.2	Unsigned32	read-create	Tcp port over which connection with Psig is to be established.
IP d5PsigSrcIp	1.3.6.1.4.1.4115.1.8.1.9.1.1.1.3	IpAddress	read-create	IP source address of Psig.
ROW d5PsigRowStatus	1.3.6.1.4.1.4115.1.8.1.9.1.1.1.4	RowStatus	read-create	The RowStatus for controlling entries in this table.
U32 d5PsigSessionNum	1.3.6.1.4.1.4115.1.8.1.9.1.1.1.5	Unsigned32	read-only	Session-number of this PSIG interface
U32 d5PsigNumChannels	1.3.6.1.4.1.4115.1.8.1.9.1.1.1.6	Unsigned32	read-only	The total number channels configured on this PSIG interface
U32 d5PsigNumStreams	1.3.6.1.4.1.4115.1.8.1.9.1.1.1.7	Unsigned32	read-only	The total number of streams configured on this PSIG interface
U32 d5PsigNumSections	1.3.6.1.4.1.4115.1.8.1.9.1.1.1.8	Unsigned32	read-only	The total number of sections configured on this PSIG interface
d5DvbCasPsigChannelTable	1.3.6.1.4.1.4115.1.8.1.9.1.2		not-accessible	This table stores status information for PSIG channels that are configured on the PSIG interfaces of the MUX(D5)
d5DvbCasPsigChannel	1.3.6.1.4.1.4115.1.8.1.9.1.2.1		not-accessible
STR d5PsigChanPsigName	1.3.6.1.4.1.4115.1.8.1.9.1.2.1.1	DisplayString	read-only	DVB psig name to be used to identify psig locally.
U32 d5PsigChanChannelId	1.3.6.1.4.1.4115.1.8.1.9.1.2.1.2	Unsigned32	read-only	Channel identifier reference for the PSIG channel connection.
U32 d5PsigChanNetworkId	1.3.6.1.4.1.4115.1.8.1.9.1.2.1.3	Unsigned32	read-only	NetworkId which is referenced by the PSIG channel connection.
U32 d5PsigChanTsId	1.3.6.1.4.1.4115.1.8.1.9.1.2.1.4	Unsigned32	read-only	TransportStreamId which is referenced by the PSIG channel connection.
U32 d5PsigChanTcpPort	1.3.6.1.4.1.4115.1.8.1.9.1.2.1.5	Unsigned32	read-only	Tcp port over which PSIG channel connection is established.
U32 d5PsigChanNumStreams	1.3.6.1.4.1.4115.1.8.1.9.1.2.1.6	Unsigned32	read-only	The total number of streams configured on the PSIG channel connection.
d5DvbCasPsigStreamTable	1.3.6.1.4.1.4115.1.8.1.9.1.3		not-accessible	This table stores status information for PSIG streams that are configured on the PSIG interfaces of the MUX(D5)
d5DvbCasPsigStream	1.3.6.1.4.1.4115.1.8.1.9.1.3.1		not-accessible
STR d5PsigStrPsigName	1.3.6.1.4.1.4115.1.8.1.9.1.3.1.1	DisplayString	read-only	DVB psig name to be used to identify psig locally.
U32 d5PsigStrChannelId	1.3.6.1.4.1.4115.1.8.1.9.1.3.1.2	Unsigned32	read-only	Channel identifier reference for the PSIG stream.
U32 d5PsigStrPid	1.3.6.1.4.1.4115.1.8.1.9.1.3.1.3	Unsigned32	read-only	PID which is referenced by the PSIG stream.
U32 d5PsigStrStreamId	1.3.6.1.4.1.4115.1.8.1.9.1.3.1.4	Unsigned32	read-only	stream identifier reference for the PSIG stream.
U32 d5PsigStrNetworkId	1.3.6.1.4.1.4115.1.8.1.9.1.3.1.5	Unsigned32	read-only	NetworkId which is referenced by the PSIG stream connection.
U32 d5PsigStrTsId	1.3.6.1.4.1.4115.1.8.1.9.1.3.1.6	Unsigned32	read-only	TransportStreamId which is referenced by the PSIG stream connection.
U32 d5PsigStrTcpPort	1.3.6.1.4.1.4115.1.8.1.9.1.3.1.7	Unsigned32	read-only	Tcp port over which PSIG stream connection is established.
U32 d5PsigStrNumSections	1.3.6.1.4.1.4115.1.8.1.9.1.3.1.8	Unsigned32	read-only	The total number of sections configured on the PSIG stream.
d5DvbCasPsigGlobalConfigObjects	1.3.6.1.4.1.4115.1.8.1.9.1.4
d5DvbCasPsigGlobalConfigGroup	1.3.6.1.4.1.4115.1.8.1.9.1.4.1
U32 d5DvbCasPsigMaxChannels	1.3.6.1.4.1.4115.1.8.1.9.1.4.1.1	Unsigned32	read-only	Maximum number of PSIG channels which can concurrently supported across all interfaces on the MUX(D5).
U32 d5DvbCasPsigMaxStreams	1.3.6.1.4.1.4115.1.8.1.9.1.4.1.2	Unsigned32	read-only	Maximum number of PSIG streams which can concurrently supported on a single PSIG channel.
U32 d5DvbCasPsigMaxSections	1.3.6.1.4.1.4115.1.8.1.9.1.4.1.3	Unsigned32	read-only	Maximum number of sections which can concurrently supported on a single PSIG stream.

RFC description

PSIG interface management for Arris D5 WAN DVB CAS multiplexer.

Start monitoring ARRIS Universal Edge QAM devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ARRIS-D5-DVB-PSIG-MIB

What Is ARRIS-D5-DVB-PSIG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description