ARRIS-C3-MAC-MIB

All MIBs › ARRIS-C3-MAC-MIB

Organization: Arris International

Last Updated: 2004-12-03

Category: DOCSIS and Cable, Vendor: ARRIS

Description: ARRIS C3 CMTS MAC layer management including CM registration and service flow control.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ARRIS-C3-MAC-MIB?

This is a vendor-specific MIB from ARRIS for the MAC-layer software on its Cadant C3 Cable Modem Termination System (CMTS), managing cable modem (CM) registration and DOCSIS service flow control. No sample objects were provided for this batch, but based on its description it would expose per-CM registration state and per-service-flow QoS/traffic tables analogous to the standard DOCS-IF-MIB family. Its monitoring relevance is both hardware and software status of the CMTS's cable interface: administrators would track cable modem registration/online state and service flow throughput to detect modems failing to register or service flows not meeting their QoS profile, which affects subscriber connectivity and bandwidth guarantees. It has a strong implicit dependency on the DOCSIS standard MIBs (DOCS-IF-MIB, DOCS-QOS-MIB) that define the underlying cable MAC domain model. It is deployed on ARRIS Cadant C3 CMTS headend equipment in cable broadband access networks. Engineers can download the ARRIS-C3-MAC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ARRIS-C3-MAC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ARRIS Cadant C3 Cable Modem Termination System (CMTS)

Monitoring Examples

No sample objects were provided for this MIB, so specific object names cannot be cited; conceptually an admin would poll cable modem registration state and per-service-flow QoS counters to detect a modem failing to come online or a service flow missing its committed bandwidth, but this cannot be grounded in real identifiers here.

Imported Objects

From ARRIS-MIB

cmtsC3

OBJECT-IDENTITY

From DOCS-IF-MIB

TenthdB
TenthdBmV

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TimeInterval
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
cmtsC3MACMIB	1.3.6.1.4.1.4115.1.4.3.6			This MIB manages the MAC software on the Cadant C3 CMTS.
INT dcxMACCableAdvanceType	1.3.6.1.4.1.4115.1.4.3.6.1.1.1.2	INTEGER	read-write	Cable Map Advance Type - 0 for Static, 1 for Dynamic.
U32 dcxMACCmOfflineAgingTime	1.3.6.1.4.1.4115.1.4.3.6.1.1.1.9	Unsigned32	read-write	Cable modem offline aging time in seconds. Minimum value is 1 hour. Maximum time before aging a modem is 10 days. Default value is 24 hours.
dcxMACCmtsMacEntry	1.3.6.1.4.1.4115.1.4.3.6.1.1.1		not-accessible	dcxMACCmtsMacEntry
DOC dcxMACCmtsMacMode	1.3.6.1.4.1.4115.1.4.3.6.1.1.1.1	DocsisMacType	read-write	Indicates the mode in which the MAC is operating. A read to this value may return any of the modes defined by DocsisMacType. Only the modes docsis, euroDocsis and mixed may be written. When set to docsis or euroDocsis, all downstream and upstream channels in this MAC domain will be configured in DOCSIS or EuroDOCSIS mode respectively. When set to mixed, the downstream channels will be configured in DOCSIS and the upstream channels will be running in EuroDOCSIS mode. The value custom will be returned in a read operation if any of the underlying channels has been reconfigured in such a way that the MAC can not be described a docsis, euroDocsis or mixed.
dcxMACCmtsMacTable	1.3.6.1.4.1.4115.1.4.3.6.1.1		not-accessible	Additional columns for docsIfCmtsMacTable. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127).
I32 dcxMACDownChannelAlpha	1.3.6.1.4.1.4115.1.4.3.6.1.2.1.6	Integer32	read-only	The percentage of excess bandwidth for the channel.
I32 dcxMACDownChannelIfFrequency	1.3.6.1.4.1.4115.1.4.3.6.1.2.1.3	Integer32	read-write	The IF frequency output by the modulator for this channel.
DOC dcxMACDownChannelMacMode	1.3.6.1.4.1.4115.1.4.3.6.1.2.1.1	DocsisMacType	read-write	Configures the downstream to DOCSIS or EuroDOCSIS. When dcxMACDownChannelWirelessMode is disabled, changes to this will impact the downstream annex type, modulation, symbol rate and interleaver. When wireless mode is enabled, only the annex type and interleaver will be changed.
I32 dcxMACDownChannelSymbolRate	1.3.6.1.4.1.4115.1.4.3.6.1.2.1.5	Integer32	read-write	Sets the downstream symbol rate.
INT dcxMACDownChannelUpconverter	1.3.6.1.4.1.4115.1.4.3.6.1.2.1.2	INTEGER	read-write	Controls whether or not the internal upconverter is used. If set to internal, the downstream IF frequency will operate in read-only mode and will be configured internally by the CMTS based on the downstream channel configuration. If set to external, the IF frequency may be programmed to set the frequency supplied to an external upconverter via the IF output. In this mode, the downstream RF frequency and power will both return 0 when read.
INT dcxMACDownChannelWirelessMode	1.3.6.1.4.1.4115.1.4.3.6.1.2.1.4	INTEGER	read-write	Enabling this mode allows non-standard downstream modulations and symbol rates to be configured which are suitable when using the CMTS in a wireless application. Changes to dcxMACDownChannelMacMode when wireless mode is active will only impact the downstream annex type and interleaver settings. Modulation and symbol rates will only be affected when wireless mode is disabled. Disabling wireless mode will reset any non-standard modulation and symbol rates settings in order to restore a standard DOCSIS or EuroDOCSIS downstream. If a set to active fails, a license may be required to activate the feature.
dcxMACDownstreamChannelEntry	1.3.6.1.4.1.4115.1.4.3.6.1.2.1		not-accessible	dcxMACDownstreamChannelEntry
dcxMACDownstreamChannelTable	1.3.6.1.4.1.4115.1.4.3.6.1.2		not-accessible	Additional columns for docsIfDownstreamChannelTable. An entry in this table exists for each ifEntry with an ifType of docsCableDownstream(128).
U32 dcxMACFlapAgingTime	1.3.6.1.4.1.4115.1.4.3.6.1.1.1.4	Unsigned32	read-write	Cable Flap List Aging Time in seconds.
U32 dcxMACFlapInsertTime	1.3.6.1.4.1.4115.1.4.3.6.1.1.1.5	Unsigned32	read-write	Cable Flap List Insertion Time threshold in seconds.
U32 dcxMACFlapListSize	1.3.6.1.4.1.4115.1.4.3.6.1.1.1.8	Unsigned32	read-write	Cable Flap List Maximum Number of Entries.
U32 dcxMACFlapMissThresh	1.3.6.1.4.1.4115.1.4.3.6.1.1.1.6	Unsigned32	read-write	Cable Flap List Miss Threshold in misses.
dcxMACObjects	1.3.6.1.4.1.4115.1.4.3.6.1
U32 dcxMACPlantLength	1.3.6.1.4.1.4115.1.4.3.6.1.1.1.3	Unsigned32	read-write	Cable Plant Length (1-way) in kilometers.
dcxMACSharedSecretEntry	1.3.6.1.4.1.4115.1.4.3.6.1.7.1		not-accessible	dcxMACSharedSecretEntry
I32 dcxMACSharedSecretId	1.3.6.1.4.1.4115.1.4.3.6.1.7.1.1	Integer32	not-accessible	ID for the associated shared secret.
ROW dcxMACSharedSecretStatus	1.3.6.1.4.1.4115.1.4.3.6.1.7.1.3	RowStatus	read-create	Row status.
STR dcxMACSharedSecretStr	1.3.6.1.4.1.4115.1.4.3.6.1.7.1.2	DisplayString	read-create	This is the shared secret itself, which is considered write-only. It can be SET but when a GET operation is performed the value is not returned.
dcxMACSharedSecretTable	1.3.6.1.4.1.4115.1.4.3.6.1.7		not-accessible	Set up shared secrets for this DOCSIS MAC Interface
dcxMACSpectralMgtActionEntry	1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1		not-accessible	Describes a single spectral management action, assigned to one or more spectral management triggers.
dcxMACSpectralMgtActionTable	1.3.6.1.4.1.4115.1.4.3.6.1.6.2		not-accessible	Describes the spectral management actions assigned to one or more spectral managment triggers.
dcxMACSpectralMgtObjects	1.3.6.1.4.1.4115.1.4.3.6.1.6
dcxMACSpectralMgtTriggerEntry	1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1		not-accessible	Describes a single spectral management trigger, available for use by one or more upstream channels or spectral groups.
dcxMACSpectralMgtTriggerTable	1.3.6.1.4.1.4115.1.4.3.6.1.6.1		not-accessible	Describes the spectral management triggers assigned to one or more upstream groups or channels. Entries are grouped by dcxMACSpMgtTriggerIndex, with each group assigned to one or more upstream channels or groups.
U32 dcxMACSpMgtActionIndex	1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.1	Unsigned32	not-accessible	An index into the spectral managment actions table used to assign actions to spectral management triggers.
I32 dcxMACSpMgtActionParam1	1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.3	Integer32	read-create	Parameter dependent on action type.
I32 dcxMACSpMgtActionParam2	1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.4	Integer32	read-create	Parameter dependent on action type.
I32 dcxMACSpMgtActionParam3	1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.5	Integer32	read-create	Parameter dependent on action type.
I32 dcxMACSpMgtActionParam4	1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.6	Integer32	read-create	Parameter dependent on action type.
I32 dcxMACSpMgtActionParam5	1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.7	Integer32	read-create	Parameter dependent on action type.
I32 dcxMACSpMgtActionParam6	1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.8	Integer32	read-create	Parameter dependent on action type.
I32 dcxMACSpMgtActionParam7	1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.9	Integer32	read-create	Parameter dependent on action type.
I32 dcxMACSpMgtActionParam8	1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.10	Integer32	read-create	Parameter dependent on action type.
ROW dcxMACSpMgtActionStatus	1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.11	RowStatus	read-create	Used to create and control the status of entries in this table.
I32 dcxMACSpMgtActionType	1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.2	Integer32	read-create	Identifies the action type represented by this entry.
U32 dcxMACSpMgtTriggerAction	1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.4	Unsigned32	read-create	An index into the spectral management action table, identical to dcxMACSpMgtActionIndex in that table, identifying the action to take if this trigger is invoked. Returns 0 if there is no action associated with this trigger.
U32 dcxMACSpMgtTriggerIndex	1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.1	Unsigned32	not-accessible	An index into the spectral managment trigger table representing a group of triggers, all assigned to the same upstream channel or spectral group.
U32 dcxMACSpMgtTriggerNumber	1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.2	Unsigned32	not-accessible	An index into the spectral managment trigger table which, when grouped with other triggers with the same trigger index fully describe the spectral mangement triggers assigned to the same upstream channel or spectral group.
I32 dcxMACSpMgtTriggerParam1	1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.5	Integer32	read-create	Parameter dependent on trigger type.
I32 dcxMACSpMgtTriggerParam2	1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.6	Integer32	read-create	Parameter dependent on trigger type.
I32 dcxMACSpMgtTriggerParam3	1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.7	Integer32	read-create	Parameter dependent on trigger type.
I32 dcxMACSpMgtTriggerParam4	1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.8	Integer32	read-create	Parameter dependent on trigger type.
I32 dcxMACSpMgtTriggerParam5	1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.9	Integer32	read-create	Parameter dependent on trigger type.
I32 dcxMACSpMgtTriggerParam6	1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.10	Integer32	read-create	Parameter dependent on trigger type.
I32 dcxMACSpMgtTriggerParam7	1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.11	Integer32	read-create	Parameter dependent on trigger type.
I32 dcxMACSpMgtTriggerParam8	1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.12	Integer32	read-create	Parameter dependent on trigger type.
ROW dcxMACSpMgtTriggerStatus	1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.13	RowStatus	read-create	Used to create and control the status of entries in this table.
I32 dcxMACSpMgtTriggerType	1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.3	Integer32	read-create	Identifies the trigger type represented by this entry.
U32 dcxMACUccMaxFailedAttempts	1.3.6.1.4.1.4115.1.4.3.6.1.1.1.10	Unsigned32	read-write	Maximum number of consecutive failed channel change attempts that a modem is allowed before the CMTS decides to no longer use the modem for load balancing purposes. If a modem successfully completes a channel change before the maximum number of attempts is reached, the number of consecutive failed attempts for the modem is reset. A value of 0 indicates no limit.
TEN dcxMACUpChannelAmpAttenuation	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.2	TenthdBmV	read-write	The amplifier attenuation level for this logical channel.
T/F dcxMACUpChannelConcatenation	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.11	TruthValue	read-write	Enables or disables the use of packet concatenation by Cable Modems on this logical channel.
INT dcxMACUpChannelExtendedFrequencyErrorDetect	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.19	INTEGER	read-write	Offsets in carrier frequency in the modem are corrected by the CMTS during ranging. Typically most if not all off the frequency error is removed in the initial ranging response with incremental changes removed during periodic ranging. If large frequency offsets are expected during initial or periodic ranging, this value may be configured to provide extended frequency offset detection and correction.
U32 dcxMACUpChannelGroupId	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.4	Unsigned32	read-write	The group ID for this logical channel used to associate it with other upsteams on the same physical network. The group ID is an index into the dcxMACUpstreamGroupTable which defines common parameters for grouped upsteams. Upstreams do not have to be grouped and there may be more than one group on the same physical network. Spatially diverse upstreams should not have the same group ID.
TEN dcxMACUpChannelHighPowerOffset	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.14	TenthdBmV	read-write	The maximum power offset of a burst above the nominal input power to the CMTS that will not cause a RNG-RSP with status continue. Valid range is from +1 dBmV to +10 dBmV in 1 dB increments.
INT dcxMACUpChannelImpulseMitigation	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.16	INTEGER	read-write	Enables or disables impulse noise mitigation for this logical channel.
INT dcxMACUpChannelIngressCancellation	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.3	INTEGER	read-write	Sets the ingress noise cancellation mode for this logical channel. Not all modes may be valid for a given logical channel configuration or hardware.
U32 dcxMACUpChannelInitialRangingDelay	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.23	Unsigned32	read-write	The number of extra microseconds to allow in a broadcast IUC3 grant to compensate for modems that perform initial ranging later than expected.
INT dcxMACUpChannelInputPowerMode	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.7	INTEGER	read-write	The receiver input power mode for this logical channel. In fixed mode the input power to the demodulator will remain fixed across symbol rate changes. In automatic mode the demodulator may vary the input power for optimal performance.
U32 dcxMACUpChannelLogC3SnrTimeconstant	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.20	Unsigned32	read-write	The averaging timeconstant used to calculate the per-logical channel MIB variable dcxMACUpChannelSignalNoise. The averaging uses a logarithmic scale, so that the actual timeconstant used is 2^X, where X is the value configured for this object. Increasing the value of X increases the degree to which the SNR results are averaged over time, and reduces the sensitivity of the reported channel SNR to local oscillations in signal quality. Averaging can effectively be disabled by setting this object to 0
U32 dcxMACUpChannelLogSnrAveTimeconstant	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.15	Unsigned32	read-write	The averaging timeconstant used to calculate the per-logical channel MIB variable docsIfSigQSignalNoise. The averaging uses a logarithmic scale, so that the actual timeconstant used is 2^X, where X is the value configured for this object. Increasing the value of X increases the degree to which the SNR results are averaged over time, and reduces the sensitivity of the reported channel SNR to local oscillations in signal quality. Averaging can effectively be disabled by setting this object to 0
TEN dcxMACUpChannelLowPowerOffset	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.13	TenthdBmV	read-write	The maximum power offset of a burst below the nominal input power to the CMTS that will not cause a RNG-RSP with status continue. Valid range is from -10 dBmV to -1 dBmV in 1 dB increments.
DOC dcxMACUpChannelMacMode	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.1	DocsisMacType	read-write	Indicates the mode in which this upstream is operating. A read or write to this may consist only of the values docsis or euroDocsis.
U32 dcxMACUpChannelMaxCmMapProcTime	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.10	Unsigned32	read-write	The maximum time in microseconds allowed for modems on this logical channel to process the Upstream Bandwidth Allocation MAP.
U32 dcxMACUpChannelNrngPreambleGuardSymbols	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.18	Unsigned32	read-write	Number of guard symbols before the preamble pilot pattern for non-ranging bursts. Guard symbols may help the receiver to mitigate the effects of ISI and\or help with the detection of bursts with an early arrival time
NUM dcxMACUpChannelPeriodicPollInterval	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.6	TimeInterval	read-write	The periodic station maintanance interval on this logical channel.
U32 dcxMACUpChannelPlantLength	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.9	Unsigned32	read-write	The cable length in km to the most distant CM on this logical upstream.
TEN dcxMACUpChannelPower	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.8	TenthdBmV	read-write	The nominal receiver input power for this logical channel.
U32 dcxMACUpChannelRngPreambleGuardSymbols	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.17	Unsigned32	read-write	Number of guard symbols before the preamble pilot pattern for ranging bursts. Guard symbols may help the receiver to mitigate the effects of ISI and\or help with the detection of bursts with an early arrival time
T/F dcxMACUpChannelSafeConfig	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.22	TruthValue	read-write	If true, MIB SETs which would cause this logical channel to go offline will return a failure
NUM dcxMACUpChannelShortPollInterval	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.5	TimeInterval	read-write	The short interval for initial unicast maintanance on this logical channel.
TEN dcxMACUpChannelSignalNoise	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.21	TenthdB	read-only	A measurement of the average signal/noise ratio for the logical upstream. The averaging may be controlled using the dcxMACUpChannelLogC3SnrTimeconstant variable
U32 dcxMACUpChannelSpMgtTriggerIndex	1.3.6.1.4.1.4115.1.4.3.6.1.3.1.12	Unsigned32	read-write	An index into spectral management trigger table, identical to dcxMACSpMgtTriggerIndex in that table. All entries with the same value of dcxMACSpMgtTriggerIndex form a trigger group all assigned to the same logical upstream channel or group. Returns 0 if there are no triggers assigned to this logical channel.
dcxMACUpstreamChannelEntry	1.3.6.1.4.1.4115.1.4.3.6.1.3.1		not-accessible	dcxMACUpstreamChannelEntry
dcxMACUpstreamChannelTable	1.3.6.1.4.1.4115.1.4.3.6.1.3		not-accessible	Additional columns for docsIfUpstreamChannelTable. An entry in this table exists for each ifEntry with an ifType of docsCableUpstream(129).
dcxMACUpstreamFrequencyEntry	1.3.6.1.4.1.4115.1.4.3.6.1.5.1		not-accessible	Describes a single contiguous region of upstream spectrum, available for use by one or more upstream spectral groups.
U32 dcxMACUpstreamFrequencyIndex	1.3.6.1.4.1.4115.1.4.3.6.1.5.1.1	Unsigned32	not-accessible	An index into the upstream frequency table representing a group of spectral regions, all associated with the same upstream spectral group.
U32 dcxMACUpstreamFrequencyRegion	1.3.6.1.4.1.4115.1.4.3.6.1.5.1.2	Unsigned32	not-accessible	An index into the upstream frequency table which, when grouped with other frequency regions with the same frequency index fully describe the upstream frequency spectrum available for use by a given spectral group.
I32 dcxMACUpstreamFrequencyStart	1.3.6.1.4.1.4115.1.4.3.6.1.5.1.3	Integer32	read-create	The start frequency for this upstream spectral region.
ROW dcxMACUpstreamFrequencyStatus	1.3.6.1.4.1.4115.1.4.3.6.1.5.1.5	RowStatus	read-create	Used to create entries in this table.
I32 dcxMACUpstreamFrequencyStop	1.3.6.1.4.1.4115.1.4.3.6.1.5.1.4	Integer32	read-create	The stop frequency for this upstream spectral region.
dcxMACUpstreamFrequencyTable	1.3.6.1.4.1.4115.1.4.3.6.1.5		not-accessible	Describes the upstream spectrum available for use by one or more upstream groups. Entries are grouped by dcxMACUpstreamFrequencyIndex, with each group assigned to one or more upstream groups.
dcxMACUpstreamGroupEntry	1.3.6.1.4.1.4115.1.4.3.6.1.4.1		not-accessible	dcxMACUpstreamGroupEntry
U32 dcxMACUpstreamGroupFrequencyIndex	1.3.6.1.4.1.4115.1.4.3.6.1.4.1.4	Unsigned32	read-create	An index into upstream frequency table, identical to dcxMACUpstreamFrequencyIndex in that table. All entries with the same value of dcxMACUpstreamFrequencyIndex form a spectral frequency group all assigned to the same upstream group. Returns 0 if there are no triggers assigned to this group.
U32 dcxMACUpstreamGroupId	1.3.6.1.4.1.4115.1.4.3.6.1.4.1.1	Unsigned32	not-accessible	The ID for this group.
INT dcxMACUpstreamGroupLoadBalancing	1.3.6.1.4.1.4115.1.4.3.6.1.4.1.3	INTEGER	read-create	Configures upstream load balancing for the group. Options are: none, initialNumeric, periodic. If set to none, no load balancing will be performed. If set to initialNumeric, the CMTS may redirect modems to other active upstream channels in the same group by setting the upstream channel ID override in the RNG-RSP at any time up to the point where the modem successfully completes periodic ranging. Once a modem has completed ranging it must be reset before it may be moved to another upstream. The modems in a group will be distributed evenly and numerically across the active channels in the group. When a modems performs initial ranging, it will be sent to the upsteam with the least number of active modems if the number of active modems on the current upsteam is greater than the average number of modems per upsteam in the group. All channels are treated equally when calculating loads. If a modem fails to range on the desired channel following a ranging overide, it will be allowed to remain on the channel on which it next performs initial ranging. If set to periodic, modems will be numerically distributed during initial ranging and then selectively moved after registration using UCC. Periodic load balancing will attempt to distribute the modems to maintain even bandwidth utilization across the channels in a group.
OCT dcxMACUpstreamGroupName	1.3.6.1.4.1.4115.1.4.3.6.1.4.1.2	OCTET STRING	read-create	The name associated with this group
U32 dcxMACUpstreamGroupSpMgtTriggerIndex	1.3.6.1.4.1.4115.1.4.3.6.1.4.1.5	Unsigned32	read-create	An index into spectral management trigger table, identical to dcxMACSpMgtTriggerIndex in that table. All entries with the same value of dcxMACSpMgtTriggerIndex form a trigger group all assigned to the same upstream group or channel. Returns 0 if there are no triggers assigned to this group.
ROW dcxMACUpstreamGroupStatus	1.3.6.1.4.1.4115.1.4.3.6.1.4.1.6	RowStatus	read-create	Used to create rows in this table
dcxMACUpstreamGroupTable	1.3.6.1.4.1.4115.1.4.3.6.1.4		not-accessible	Entries containing definitions for group IDs that can be associated with an upstream channel.

RFC description

MAC layer software management for Arris Cadant C3 cable modem termination systems.

Start monitoring ARRIS (Cadant) C3 CMTS (Cable Modem Termination System) (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ARRIS-C3-MAC-MIB

What Is ARRIS-C3-MAC-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description