IPAD-ROUTER-MIB

All MIBs › IPAD-ROUTER-MIB

Category: Domain: WAN, Routing Protocols, Vendor: ARRIS, Vendor: Verilink

Description: Verilink IPAD router MIB providing SNMP objects for static and dynamic routing configuration on IPAD access platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is IPAD-ROUTER-MIB?

IPAD-ROUTER-MIB is a vendor-specific MIB from Verilink for the routing functionality of its IPAD (Integrated Packet Access Device) access platform, part of Verilink's HBU/IPAD product family used for WAN/broadband access. It belongs to the network routing configuration and monitoring category for access routers. It exposes a circuit-oriented table describing each routed circuit's IP address, subnet mask, maximum transmit unit, routing cost, and which routing protocols (RIP, OSPF, multicast) are enabled on it. Its monitoring value is primarily verifying software/configuration status of the router's WAN circuits - confirming correct IP addressing, MTU, and which dynamic routing protocols are active per circuit - to diagnose routing adjacency failures or misconfigured links. It builds on general IP routing concepts (RIP, OSPF) rather than importing another SNMP MIB directly, and is deployed on Verilink IPAD access routers at customer premises or carrier network edges for WAN connectivity. Engineers can download the IPAD-ROUTER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in IPAD-ROUTER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Verilink IPAD access router

Monitoring Examples

An administrator can poll ipadCircuitTable/ipadCircuitTableEntry, indexed by ipadCircuitIndex, to read ipadCircuitIpAddress and ipadCircuitIpMask and confirm a circuit's addressing matches provisioning records. Checking ipadCircuitEnableRIP and ipadCircuitEnableOSPF reveals whether the expected dynamic routing protocol is actually enabled on that circuit, and comparing ipadCircuitCost against the design would flag a misconfigured routing preference; ipadCircuitMaxTransmitUnit helps catch an MTU mismatch causing fragmentation issues.

What Can Be Monitored

circuit IP address/subnet mask
circuit MTU
circuit routing cost
RIP/OSPF/multicast enabled per circuit

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
verilink	1.3.6.1.4.1.321
hbu	1.3.6.1.4.1.321.100
ipad	1.3.6.1.4.1.321.100.1
ipadFrPort	1.3.6.1.4.1.321.100.1.1
ipadService	1.3.6.1.4.1.321.100.1.2
ipadChannel	1.3.6.1.4.1.321.100.1.3
ipadDLCI	1.3.6.1.4.1.321.100.1.4
ipadEndpoint	1.3.6.1.4.1.321.100.1.5
ipadUser	1.3.6.1.4.1.321.100.1.6
ipadPPP	1.3.6.1.4.1.321.100.1.7
ipadModem	1.3.6.1.4.1.321.100.1.8
ipadSvcAware	1.3.6.1.4.1.321.100.1.9
ipadPktSwitch	1.3.6.1.4.1.321.100.1.10
ipadTrapDest	1.3.6.1.4.1.321.100.1.11
ipadMisc	1.3.6.1.4.1.321.100.1.12
ipadRouter	1.3.6.1.4.1.321.100.1.13
ipadCircuitParms	1.3.6.1.4.1.321.100.1.13.1
ipadCircuitTable	1.3.6.1.4.1.321.100.1.13.1.1		not-accessible	Table of Circuit parameters.
ipadCircuitTableEntry	1.3.6.1.4.1.321.100.1.13.1.1.1		not-accessible	An entry in the ipad Circuit parameter table.
INT ipadCircuitIndex	1.3.6.1.4.1.321.100.1.13.1.1.1.1	INTEGER	read-only	The index into the Circuit table.
STR ipadCircuitEndpoint	1.3.6.1.4.1.321.100.1.13.1.1.1.2	DisplayString	read-write	An entry in the endpoint table.
IP ipadCircuitIpAddress	1.3.6.1.4.1.321.100.1.13.1.1.1.3	IpAddress	read-write	The IP Address of the Circuit.
IP ipadCircuitIpMask	1.3.6.1.4.1.321.100.1.13.1.1.1.4	IpAddress	read-write	The IP Mask of this Circuit IP address.
INT ipadCircuitMaxTransmitUnit	1.3.6.1.4.1.321.100.1.13.1.1.1.5	INTEGER	read-write	The Maximum packet size carried by this Circuit.
INT ipadCircuitCost	1.3.6.1.4.1.321.100.1.13.1.1.1.6	INTEGER	read-write	The cost (delay) of this Circuit.
INT ipadCircuitEnableRIP	1.3.6.1.4.1.321.100.1.13.1.1.1.7	INTEGER	read-write	To enable or disable RIP for this Circuit.
INT ipadCircuitEnableOSPF	1.3.6.1.4.1.321.100.1.13.1.1.1.8	INTEGER	read-write	To enable or disable OSPF for this Circuit.
INT ipadCircuitEnableMulticast	1.3.6.1.4.1.321.100.1.13.1.1.1.9	INTEGER	read-write	To allow multicast adressing for this Circuit.
INT ipadCircuitAdd	1.3.6.1.4.1.321.100.1.13.1.2	INTEGER	read-write	Writing addnew(2) to this field causes a new (blank) route to be appended to the Circuit Table.
INT ipadCircuitDelete	1.3.6.1.4.1.321.100.1.13.1.3	INTEGER	read-write	Writing the index of an entry in the Circuit table causes that entry to be deleted.
ipadRIPParms	1.3.6.1.4.1.321.100.1.13.2
INT ipadRIPEnable	1.3.6.1.4.1.321.100.1.13.2.1	INTEGER	read-write	Determines if RIP routing is enabled.
INT ipadRIPTrustNeighbors	1.3.6.1.4.1.321.100.1.13.2.2	INTEGER	read-write	Determines if RIP Neighbors should be trusted.
INT ipadRIPInterval	1.3.6.1.4.1.321.100.1.13.2.3	INTEGER	read-write	Specifies the RIP interval in seconds.
INT ipadRIPDomain	1.3.6.1.4.1.321.100.1.13.2.4	INTEGER	read-write	Specifies the RIP Domain.
ipadRIPStaticARPTable	1.3.6.1.4.1.321.100.1.13.2.5		not-accessible	Table of RIP Static ARP parameters.
ipadRIPStaticARPTableEntry	1.3.6.1.4.1.321.100.1.13.2.5.1		not-accessible	An entry in the ipad RIP Static ARP parameter table.
INT ipadRIPStaticARPIndex	1.3.6.1.4.1.321.100.1.13.2.5.1.1	INTEGER	read-only	The index into the RIP Static ARP table.
STR ipadRIPStaticARPEndpoint	1.3.6.1.4.1.321.100.1.13.2.5.1.2	DisplayString	read-write	An entry in the endpoint table.
IP ipadRIPStaticARPIpAddress	1.3.6.1.4.1.321.100.1.13.2.5.1.3	IpAddress	read-write	This is the IP address of the device we will associate the MAC or DLCI address.
STR ipadRIPStaticARPMacAddress	1.3.6.1.4.1.321.100.1.13.2.5.1.4	DisplayString	read-write	MAC address of the device.
INT ipadRIPStaticARPDLCIAddress	1.3.6.1.4.1.321.100.1.13.2.5.1.5	INTEGER	read-write	DLCI address of the device.
INT ipadRIPStaticARPEnableARP	1.3.6.1.4.1.321.100.1.13.2.5.1.6	INTEGER	read-write	Enable that Static ARP Entry.
INT ipadRIPStaticARPAdd	1.3.6.1.4.1.321.100.1.13.2.6	INTEGER	read-write	Writing addnew(2) to this field causes a new (blank) route to be appended to the Static ARP Table.
INT ipadRIPStaticARPDelete	1.3.6.1.4.1.321.100.1.13.2.7	INTEGER	read-write	Writing the index of an entry in the Static ARP table causes that entry to be deleted.
ipadRIPStaticRouteTable	1.3.6.1.4.1.321.100.1.13.2.8		not-accessible	Table of RIP Static Route parameters.
ipadRIPStaticRouteTableEntry	1.3.6.1.4.1.321.100.1.13.2.8.1		not-accessible	An entry in the ipad RIP Static Route parameter table.
INT ipadRIPStaticRouteIndex	1.3.6.1.4.1.321.100.1.13.2.8.1.1	INTEGER	read-only	The index into the RIP Static Route table.
STR ipadRIPStaticRouteEndpoint	1.3.6.1.4.1.321.100.1.13.2.8.1.2	DisplayString	read-write	An entry in the endpoint table.
IP ipadRIPStaticRouteTargetIpAddress	1.3.6.1.4.1.321.100.1.13.2.8.1.3	IpAddress	read-write
IP ipadRIPStaticRouteTargetIpMask	1.3.6.1.4.1.321.100.1.13.2.8.1.4	IpAddress	read-write	IP Mask of the IP address.
IP ipadRIPStaticRouteNextHopIpAddress	1.3.6.1.4.1.321.100.1.13.2.8.1.5	IpAddress	read-write	Next Hop IP address to reach the remote Network.
INT ipadRIPStaticRouteCost	1.3.6.1.4.1.321.100.1.13.2.8.1.6	INTEGER	read-write	Cost to reach that remote Network.
INT ipadRIPStaticRouteEnableRouter	1.3.6.1.4.1.321.100.1.13.2.8.1.7	INTEGER	read-write	Enable or Not this static route.
INT ipadRIPStaticRouteAdd	1.3.6.1.4.1.321.100.1.13.2.9	INTEGER	read-write	Writing addnew(2) to this field causes a new (blank) route to be appended to the Static Route Table.
INT ipadRIPStaticRouteDelete	1.3.6.1.4.1.321.100.1.13.2.10	INTEGER	read-write	Writing the index of an entry in the Static Route table causes that entry to be deleted.
ipadRIPNeighborTable	1.3.6.1.4.1.321.100.1.13.2.11		not-accessible	Table of RIP trusted neighbors.
ipadRIPNeighborTableEntry	1.3.6.1.4.1.321.100.1.13.2.11.1		not-accessible	An entry in the ipad RIP trusted neighbor table.
INT ipadRIPNeighborIndex	1.3.6.1.4.1.321.100.1.13.2.11.1.1	INTEGER	read-only	The index into the ipadRIPNeighborTable.
IP ipadRIPNeighborAddress	1.3.6.1.4.1.321.100.1.13.2.11.1.2	IpAddress	read-only	A RIP trusted neighbor.
IP ipadRIPNeighborAdd	1.3.6.1.4.1.321.100.1.13.2.12	IpAddress	read-write	Writing an IP address to this object adds the IP address to the ipad RIP Trusted Neighbor table.
IP ipadRIPNeighborDelete	1.3.6.1.4.1.321.100.1.13.2.13	IpAddress	read-write	Writing an IP address to this object removes the IP address from the ipad RIP Trusted Neighbor table.

RFC description

Vendor-private MIB for managing IPAD (Intelligent Packet Access Device) router platforms and interfaces.

Start monitoring Verilink IPAD access router (routing/circuit config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download IPAD-ROUTER-MIB

What Is IPAD-ROUTER-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description