ARMILLAIRE2000-MIB

All MIBs › ARMILLAIRE2000-MIB

Category: Network Monitoring (RMON)

Description: Armillaire 2000 network monitoring system probe and alert management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ARMILLAIRE2000-MIB?

ARMILLAIRE2000-MIB is a vendor MIB for the Armillaire 2000 network monitoring/probe system, used to manage and report on switches monitored by Armillaire's own management platform. It exposes per-switch identity and status data, name, description, location, contact, IP address, uptime, software version/description, type, and name-status, plus a table of PC/host information observed by the switch. Its monitoring emphasis is strongly on hardware/software status, switch uptime and software version serve as core health and inventory indicators, while descriptive/status fields support consistency checks across managed switches. It appears to be a largely self-contained vendor MIB, using its own products/services subtree without heavy reliance on other standard MIBs. It is deployed in networks using Armillaire's monitoring probes/appliances, where ARMILLAIRE2000-MIB SNMP monitoring tracks managed switches and the end-hosts connected to them.

IPNetwork Monitor allows you to monitor SNMP objects defined in ARMILLAIRE2000-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

network monitoring probe/appliance (Armillaire 2000 system)
managed network switches

Monitoring Examples

switchUpTime and switchVersion/switchVerDescr let an admin confirm how long a given switch has been running and which firmware version it's on, useful for spotting an unexpected reboot or an out-of-date version. switchIPAddr, switchName, and switchNameStatus identify and validate each monitored switch's naming/addressing consistency, while switchPcInfoTable provides visibility into the hosts/PCs attached to a given switch, useful for detecting an unexpected or unauthorized device on the network.

What Can Be Monitored

switch uptime
software/firmware version
switch name/description/location/contact
switch IP address
attached PC/host information

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
TimeTicks
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
alarmGrp	1.3.6.1.4.1.4618.1.2.7.2
alarmTraps	1.3.6.1.4.1.4618.1.2.7.2.1
armillaire	1.3.6.1.4.1.4618
armillaire2000	1.3.6.1.4.1.4618.1.2
NTF atmAISNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.31			Info : ATM AIS
NTF atmLOFNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.32			Info : ATM LOF
NTF atmLOSNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.33			Info : ATM LOS
NTF atmRAINotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.30			Info : ATM Remote Alarm Indication
audit	1.3.6.1.4.1.4618.1.2.6.6
AUD auditDPC	1.3.6.1.4.1.4618.1.2.6.6.1.3.1.3	AuditOperation	read-write	This Object is set to Apply Audit on this particular DPC. The possible option for 'SET' is 1) audit A 'GET' Operation on this object would result the default value 'no action' being displayed.
auditDPCCfgEntry	1.3.6.1.4.1.4618.1.2.6.6.1.3.1		not-accessible
auditDPCTable	1.3.6.1.4.1.4618.1.2.6.6.1.3		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
auditInfo	1.3.6.1.4.1.4618.1.2.6.6.1
AUD auditISDNTrnk	1.3.6.1.4.1.4618.1.2.6.6.1.1.1.2	AuditOperation	read-write	This Object is set to Apply Audit on this particular ISDN Trunk. The possible option for 'SET' is 1) audit A 'GET' Operation on this object would result the default value 'no action' being displayed.
auditISDNTrnkCfgEntry	1.3.6.1.4.1.4618.1.2.6.6.1.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
auditISDNTrnkTable	1.3.6.1.4.1.4618.1.2.6.6.1.1		not-accessible	Audit ISDN Trunk Table. This table has one index: auditTrnkId (Integer)
AUD auditPeriod	1.3.6.1.4.1.4618.1.2.6.6.1.4.2	AuditOperation	read-write	This Object is set to Apply Audit for this particular Period. The possible option for 'SET' is 1) audit A 'GET' Operation on this object would result the default value 'no action' being displayed.
auditPeriodGrp	1.3.6.1.4.1.4618.1.2.6.6.1.4
INT auditPointCode	1.3.6.1.4.1.4618.1.2.6.6.1.3.1.1	INTEGER	read-only	The Point Code on which the audit operation is being applied.
AUD auditPointCodeType	1.3.6.1.4.1.4618.1.2.6.6.1.3.1.2	AuditType	read-only	The Point Code Type. Ansi/Itu.
INT auditTimePeriod	1.3.6.1.4.1.4618.1.2.6.6.1.4.1	INTEGER	read-write	The Audit Period for which the audit operation is being applied.
INT auditTrnkId	1.3.6.1.4.1.4618.1.2.6.6.1.1.1.1	INTEGER	read-only	The ISDN Trunk Id on which the audit operation is being applied.
AUD auditXLink	1.3.6.1.4.1.4618.1.2.6.6.1.2	AuditOperation	read-write	This option audits the All the existing XLinks.
BOO cdrAppendModule801	1.3.6.1.4.1.4618.1.2.4.2.1	Bool	read-write	Indicates if the Armillaire Proprietary Module 801 should be appended to those BAF Records. Text Format ( Not Case sensitive ) Valid values : yes, no
cdrBafConfig	1.3.6.1.4.1.4618.1.2.4.2
cdrConfig	1.3.6.1.4.1.4618.1.2.4.1
NTF cdrDeleteErrNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.47			Info : CDR file cannot be deleted
NTF cdrDiskFullMajorNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.119			CDR Disk Usage reached Major Threshold
NTF cdrDiskFullMinorNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.118			CDR Disk Usage reached Minor Threshold
NTF cdrDiskFullNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.44			Info :CDR file disk usage reach critical threshold
NTF cdrErrFileLocErrNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.50			Info: Invalid Cdr Directory
NTF cdrErrMoveCdrNackNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.120			Invalid CDR file Non-Ack Directory
NTF cdrErrTempFileLocErrNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.51			Info: Invalid Cdr Directory
STR cdrFileAcknowledge	1.3.6.1.4.1.4618.1.2.4.4.7	DisplayString	read-write	Acknowledgement of the CDR file. The input should be the File Name.
NTF cdrFileCloseErrNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.53			Info: Error in closing CDR file
cdrFileConfig	1.3.6.1.4.1.4618.1.2.4.3
STR cdrFileCreateDate	1.3.6.1.4.1.4618.1.2.4.4.4	DisplayString	read-only	Creation date of the desired CDR file FORMAT:2000/01/26
STR cdrFileCreateTime	1.3.6.1.4.1.4618.1.2.4.4.5	DisplayString	read-only	Creation time of the desired CDR file FORMAT: 20:12:23
NTF cdrFileDelete5DaysNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.54			Info: cdr files created within past 5 days are deleted
INT cdrFileDestinationId	1.3.6.1.4.1.4618.1.2.4.3.5	INTEGER	read-write	This Destination Component Id specifies the network element for receiving of cdr files according to AMADNS. This type will be part of second node of CDR filename. Valid values 01-4095 for Set. If not configured then Default value is 0.
INT cdrFileDestinationType	1.3.6.1.4.1.4618.1.2.4.3.4	INTEGER	read-write	This Destination Component type specifies the network element for receiving of cdr files according to AMADNS. This type will be part of second node of CDR filename. Valid values 01-15 For Set. If not configured then Default value is 0.
cdrFileInfo	1.3.6.1.4.1.4618.1.2.4.4
INT cdrFileInterval	1.3.6.1.4.1.4618.1.2.4.3.1	INTEGER	read-write	How often the cdr file being generated. Valid values 1-86400 seconds
NTF cdrFileMoveCdrNackNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.121			CDR file moved to Non-Ack Directory
NTF cdrFileMoveErrNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.46			Info : Error in moving CDR file from temp location to target CDR file location
STR cdrFileName	1.3.6.1.4.1.4618.1.2.4.4.2	DisplayString	read-only	Name of the desired CDR file. Can be any combination of alphanumeric characters. Spaces are not allowed. Filename cannot exceed 24 characters.
NTF cdrFileOpenErrNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.45			Info :CDR open file error
INT cdrFileQuery	1.3.6.1.4.1.4618.1.2.4.4.1	INTEGER	read-write	Number of the desired CDR file. set file number to update the cdr file info.
NTF cdrFileReadyNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.43			Info :Cdr file is ready for Polling
INT cdrFileRecLimit	1.3.6.1.4.1.4618.1.2.4.3.2	INTEGER	read-write	Maximum Nubler of BAF records in a CDR File. Valid values 1,677,215
INT cdrFileRecordNum	1.3.6.1.4.1.4618.1.2.4.4.6	INTEGER	read-only	Record number of the desired CDR file
INT cdrFileSourceId	1.3.6.1.4.1.4618.1.2.4.3.3	INTEGER	read-write	This Source Component id specifies the network element for receiving of cdr files according to AMADNS. This id will be part of first node of CDR filename. Valid values 01-4095 For Set. If not configured then Default value is 0.
INT cdrFileStatus	1.3.6.1.4.1.4618.1.2.4.4.3	INTEGER	read-only	Status of the desired CDR file
NTF cdrFileSysErrNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.52			Info: Cdr File System Operation error.
ENA cdrGenMgmntCmd	1.3.6.1.4.1.4618.1.2.4.5.1	EnableOperation	read-write	This command is used to turn on the CDR generation for the entire switch.If switch CDR generation is enabled then CDR generation can be enabled/disabled on Trunk Group. The possible options are : 1) Enable 2) Disable [default]
INT cdrLongDurCallGenTime	1.3.6.1.4.1.4618.1.2.4.1.1	INTEGER	read-write	The Time of the day that the syatem will generate the long duration call. CDR Format ( HHMM ) Valid time of the day from 0000 - 2359
cdrMgmntCmdGroup	1.3.6.1.4.1.4618.1.2.4.5
cdrMngmtTrnkGrpEntry	1.3.6.1.4.1.4618.1.2.4.5.2.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
cdrMngmtTrnkGrpTable	1.3.6.1.4.1.4618.1.2.4.5.2		not-accessible	CDR Management Command for Trunk group Table. The index for this table is cdrTrnkGrpId (integer)
INT cdrRecordingOfficeId	1.3.6.1.4.1.4618.1.2.4.2.3	INTEGER	read-write	AMA Record Id code of the switch. Valid values 000001-999998 For Set. If not configured then Default value is 0.
INT cdrSensorId	1.3.6.1.4.1.4618.1.2.4.2.2	INTEGER	read-write	AMA Sensor Id code of the switch. Valid values 000001-999998 for Set. If not configured then Default value is 0.
CDR cdrTrnkGrpdirection	1.3.6.1.4.1.4618.1.2.4.5.2.1.2	CdrFlag	read-write	The Direction
INT cdrTrnkGrpId	1.3.6.1.4.1.4618.1.2.4.5.2.1.1	INTEGER	read-only	The trunk Group Id.
ENA cdrTrnkGrpMgmntCmd	1.3.6.1.4.1.4618.1.2.4.5.2.1.3	EnableOperation	read-write	This command is used to turn on the CDR generation on the Trunk Group. The possible options are : 1) Enable 2) Disable [default]
NTF cdrWriteHeaderErrNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.48			Info :Error in writing CDR file header
NTF cdrWriteRecErrNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.49			Info :Error in writing CDR record
digitStripMgmntEntry	1.3.6.1.4.1.4618.1.2.2.4.4.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
digitStripMgmntTable	1.3.6.1.4.1.4618.1.2.2.4.4.1		not-accessible	Route Management Command Table. Commands for enabling or disabling digit stripping in MSSC's routing feature are applied here. The index for this table is rtName(String).
LOG disableLogGen	1.3.6.1.4.1.4618.1.2.6.2.2.2	LogFileEnDis	read-write	This option disables the log file Generation. 1) ALARM_LOG 2) AUDIT_LOG 3) MEAS_LOG 4) DIAG_LOG 5) SCRTY_LOG 6) EVENT_LOG 7) BILL_LOG 8) EMP_LOG 9) LOG_ALL Choose any one from drop down list..
enableGroup	1.3.6.1.4.1.4618.1.2.2.6
ENA enableIsdntrunk	1.3.6.1.4.1.4618.1.2.2.6.4	EnableStatus	read-write	This is POST-CONFIGURATION command to ENABLE the ISDN Trunk. This Command can only be applied to Enable the ISDN Trunk. The 'GET' operation will result in the default value (no) being returned. The possible options are: 1) yes 2) no (Default)
LOG enablelogGen	1.3.6.1.4.1.4618.1.2.6.2.2.1	LogFileEnDis	read-write	This option enables the log file Generation. 1) ALARM_LOG 2) AUDIT_LOG 3) MEAS_LOG 4) DIAG_LOG 5) SCRTY_LOG 6) EVENT_LOG 7) BILL_LOG 8) EMP_LOG 9) LOG_ALL Choose any one from drop down list...
ENA enableRoute	1.3.6.1.4.1.4618.1.2.2.6.6	EnableStatus	read-write	This is POST-CONFIGURATION command to ENABLE the ROUTE and COMMIT all the configuration set for MTP2. This Command can only be applied to Enable the XConnect. The 'GET' operation will result in the default value (no) being returned. The possible optio
ENA enableSS7Ckt	1.3.6.1.4.1.4618.1.2.2.6.3	EnableStatus	read-write	This is POST-CONFIGURATION command to ENABLE the SS7 Circuit. This Command can only be applied to Enable the SS7 Circuit and COMMIT all the SS7 Circuit Configuration. The 'GET' operation will result in the default value (no) being returned. The possib
ENA enableSS7Route	1.3.6.1.4.1.4618.1.2.2.6.2	EnableStatus	read-write	This is POST-CONFIGURATION command to ENABLE the SS7 Route. The 'GET' operation will result in the default value (no) being returned. The possible options are: 1) yes 2) no (Default)
ENA enableSwitch	1.3.6.1.4.1.4618.1.2.2.6.1	EnableStatus	read-write	This is POST-CONFIGURATION command to ENABLE the switch. The 'GET' operation will result in the default value (no) being returned. The possible options are: 1) yes 2) no (Default)
ENA enableXconnect	1.3.6.1.4.1.4618.1.2.2.6.5	EnableStatus	read-write	This is POST-CONFIGURATION command to ENABLE the Xconnect. The 'GET' operation will result in the default value (no) being returned. The possible options are: 1) yes 2) no (Default)
ETH ethernetConnStatus	1.3.6.1.4.1.4618.1.2.6.5.1	EthernetConnStatus	read-only	Current Status of the Ethernet Connection to MSSC. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
ethernetConnStatusInfo	1.3.6.1.4.1.4618.1.2.6.5
INT faultModemChnlId	1.3.6.1.4.1.4618.1.2.5.1.1.1.2	INTEGER	read-only	The terminating Channel Channel Id.
INT faultModemRepnum	1.3.6.1.4.1.4618.1.2.5.1.1.1.3	INTEGER	read-only	Counter
MOD faultModemReset	1.3.6.1.4.1.4618.1.2.5.1.1.1.4	ModemResetStatus	read-write	The Option for Reseting the terminating Channel. A 'GET' operation on this object will display the default value [no]. The possible option for 'SET' operation is 1) YES
INT faultModemTrnkId	1.3.6.1.4.1.4618.1.2.5.1.1.1.1	INTEGER	read-only	The terminating Channel trunk Id.
ft	1.3.6.1.4.1.4618.1.2.6.1
NTF ftControlSwitchOverFailedNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.112			Info : Control SwitchOver Failure
NTF ftControlSwitchOverSucceededNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.111			Info : Control SwitchOver Successful
NTF ftForcedSwitchOverFailedNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.114			Info : Forced SwitchOver Failure
NTF ftForcedSwitchOverSucceededNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.113			Info : Forced SwitchOver Successful
NTF ftMsscFtmupNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.110			Info : Process abnormal termination
NTF ftProcessAbnormalTerminationNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.107			Info : Process abnormal termination
NTF ftProcessRestartConfigFailedNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.109			Info : Process abnormal termination
NTF ftProcessRestartConfigSucceededNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.108			Info : Process abnormal termination
NTF ftProcessRestartDisableNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.115
ftSwitchOverInfo	1.3.6.1.4.1.4618.1.2.6.1.1
NTF genConsoleLoginNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.2			Info : A user has successfully logged in from console
NTF genConsoleLogoutNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.3			Info : A user has successfully logged out from console
NTF genProcessBufOverflowNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.4			Info : Process ran out of buffer
NTF genProcessBufOverflowRecoverNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.5			Info : Process Recovered from Buffer Overflow
NTF genProcessHeapOverFlowNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.6			Info : Process Heap OverFlow Detected
NTF genProcessHeapOverFlowRecoverNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.7			Info : Recovered from Process Heap Overflow
NTF genswitchSnmpAgentReadyNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.1			Info : SNMP Agent is up
NTF hubPriIntfDownNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.104			Info : Primary Interface down
NTF hubPriIntfUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.103			Info : Primary Interface Up
NTF hubSecIntfDownNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.106			Info : Secondary Interface Down
NTF hubSecIntfUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.105			Info : Secondary Interface Up
ENA ilbMgmntCmd	1.3.6.1.4.1.4618.1.2.2.4.4.2.1.2	EnableOperation	read-write	Management Command for Enabling/Disabling the feature 'ISDN Channel LOAD BALANCE'. When this feature is turned on all the incoming calls are distributed evenly in all the trunks for the specified routing numbers. The possible options are : 1) Enable
isdn	1.3.6.1.4.1.4618.1.2.2.2
ISD isdnChnlMgmntCmd	1.3.6.1.4.1.4618.1.2.2.2.4.2.1.3	IsdnChnlMgtOperation	read-write	Management Command for Enabling/Disabling the specified Channel in the specified trunk. The possible options are : 1) Enable 2) Disable [default]
isdnChnlMgmntEntry	1.3.6.1.4.1.4618.1.2.2.2.4.2.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
INT isdnChnlMgmntId	1.3.6.1.4.1.4618.1.2.2.2.4.2.1.2	INTEGER	read-only	Channel id.
isdnChnlMgmntTable	1.3.6.1.4.1.4618.1.2.2.2.4.2		not-accessible	ISDN Trunk Channel Management Table. The Management Commands for ISDN Trunk(s) in MSSC are provided in this table. This table has the index isdnTrunkMgmntId (Integer).
isdnChnlStatusCfgEntry	1.3.6.1.4.1.4618.1.2.2.2.3.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
isdnChnlStatusTable	1.3.6.1.4.1.4618.1.2.2.2.3		not-accessible	ISDN Channel Status Table. Information about the DS0 Channel(s) Status in MSSC are provided in this table. The index of this table is isdnStatusTrunkId (Integer)
INT isdnCntThreshold	1.3.6.1.4.1.4618.1.2.2.2.2.1.12	INTEGER	read-write	Bad Call Count Threshold
NTF isdnDChnlDnNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.78			Info : An ISDN D-channel is down
INT isdnDchnlId	1.3.6.1.4.1.4618.1.2.2.2.2.1.4	INTEGER	read-write	D-Channel Id
INT isdnDchnlTimeSlot	1.3.6.1.4.1.4618.1.2.2.2.2.1.14	INTEGER	read-write	D-Channel Time slot
NTF isdnDChnlUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.77			Info : An ISDN D-channel is Up
DIR isdnDirection	1.3.6.1.4.1.4618.1.2.2.2.2.1.9	Direction	read-write	Traffic direction. possible options are 1) in 2) out 3) both
DS1 isdnDS1LBO	1.3.6.1.4.1.4618.1.2.2.2.2.1.21	DS1LBO	read-write	DS1 Line Build Out, possible options are 1) upTo133Feet(1) 2) upTo266Feet(2) 3) upTo399Feet(3) 4) upTo533Feet(4) 5) upTo655Feet(5) 6) negative7_5Db(6) 7) negative15Db(7) 8) negative22_5Db(8)
DS1 isdnDS1LineCoding	1.3.6.1.4.1.4618.1.2.2.2.2.1.19	DS1LineCoding	read-write	DS1 Line Coding, possible options are 1) b8zs(1) 2) ami(2)
DS1 isdnDS1LineType	1.3.6.1.4.1.4618.1.2.2.2.2.1.18	DS1LineType	read-write	DS1 Line Type possible options are 1) esF(1) 2) d4(2)
TRA isdnDS1TransClkSrc	1.3.6.1.4.1.4618.1.2.2.2.2.1.20	TransClkSrc	read-write	DS1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
DS1 isdnDS3DS1LineType	1.3.6.1.4.1.4618.1.2.2.2.2.1.25	DS1LineType	read-write	DS3DS1 Line Type possible options are 1) esF(1) 2) d4(2)
TRA isdnDS3DS1TransClkSrc	1.3.6.1.4.1.4618.1.2.2.2.2.1.26	TransClkSrc	read-write	DS3DS1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
DS3 isdnDS3LBO	1.3.6.1.4.1.4618.1.2.2.2.2.1.24	DS3LBO	read-write	DS3 Line Build Out possible options are 1) short(1) 2) long(2)
DS3 isdnDS3LineType	1.3.6.1.4.1.4618.1.2.2.2.2.1.22	DS3LineType	read-write	DS3 Line Type possible options are 1) cbitParity(1) 2) clearChannel(2)
TRA isdnDS3TransClkSrc	1.3.6.1.4.1.4618.1.2.2.2.2.1.23	TransClkSrc	read-write	DS3 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
INT isdnDurThreshold	1.3.6.1.4.1.4618.1.2.2.2.2.1.11	INTEGER	read-write	Bad Call Duration Threshold
E1C isdnE1CRC4	1.3.6.1.4.1.4618.1.2.2.2.2.1.16	E1CRC4	read-write	E1 Cyclic Redundancy Code, possible options are 1) enabled(1) 2) disable(2)
E1M isdnE1MultiFrame	1.3.6.1.4.1.4618.1.2.2.2.2.1.15	E1MultiFrame	read-write	E1 multiFrame Type possible options are 1) CAS(1) 2) CCS(2)
TRA isdnE1TransClk	1.3.6.1.4.1.4618.1.2.2.2.2.1.17	TransClkSrc	read-write	E1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
isdnLoadBalanceMgmntEntry	1.3.6.1.4.1.4618.1.2.2.4.4.2.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
isdnLoadBalanceMgmntTable	1.3.6.1.4.1.4618.1.2.2.4.4.2		not-accessible	Isdn Channel Load Balance Command Table. Turning this feature on will result in distributing all the incoming calls evenly in all the trunks for the specified route number. The index for this table is rteName(String).
isdnMgmntGroup	1.3.6.1.4.1.4618.1.2.2.2.4
IFT isdnPhyIntfType	1.3.6.1.4.1.4618.1.2.2.2.2.1.13	IfType	read-write	Isdn Physical Interface Type possible options are 1) T1 (interface-t1) 2) T3 (interface-t3) 3) Unchannelized T3 (interface-ut3) 4) OC3 (interface-oc3) 5) Unchannelized T3 with compression (interface-ut3cp) 6) OC3 with compression (interface-oc3cp)
INT isdnPortId	1.3.6.1.4.1.4618.1.2.2.2.2.1.8	INTEGER	read-write	Port id
ISD isdnPriority	1.3.6.1.4.1.4618.1.2.2.2.2.1.10	IsdnPriority	read-write	Traffic priority
INT isdnSlotId	1.3.6.1.4.1.4618.1.2.2.2.2.1.7	INTEGER	read-write	Slot id
INT isdnStatusChnlAllocMeth	1.3.6.1.4.1.4618.1.2.2.2.3.1.4	INTEGER	read-only	Isdn Channel AllocMeth.
INT isdnStatusChnlId	1.3.6.1.4.1.4618.1.2.2.2.3.1.2	INTEGER	read-only	Channel id.
TRU isdnStatusChnlState	1.3.6.1.4.1.4618.1.2.2.2.3.1.3	TrunkState	read-only	Isdn Channel String.
INT isdnStatusChnlSuConnId	1.3.6.1.4.1.4618.1.2.2.2.3.1.5	INTEGER	read-only	Isdn Channel SuConnId.
INT isdnStatusTrunkId	1.3.6.1.4.1.4618.1.2.2.2.3.1.1	INTEGER	read-only
isdnTmrCfgEntry	1.3.6.1.4.1.4618.1.2.2.2.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
isdnTmrCfgTable	1.3.6.1.4.1.4618.1.2.2.2.1		not-accessible	ISDN Timer Table. The Information about ISDN Timers in MSSC are provided in this table. User can Modify Timer(s) from this table. This table has one index: isdnTnkId (Integer).
INT isdnTmrT301	1.3.6.1.4.1.4618.1.2.2.2.1.1.2	INTEGER	read-write	T301 timer - alert received Recommandation Q.931, TABLE 9-1/Q931
INT isdnTmrT302	1.3.6.1.4.1.4618.1.2.2.2.1.1.3	INTEGER	read-write	T302 timer - SETUP ACK sent Receipt of INFO Recommandation Q.931, TABLE 9-1/Q931
INT isdnTmrT303	1.3.6.1.4.1.4618.1.2.2.2.1.1.4	INTEGER	read-write	T303 timer - setup sent Recommandation Q.931, TABLE 9-1/Q931. Default Value is 4000 milliSeconds
INT isdnTmrT304	1.3.6.1.4.1.4618.1.2.2.2.1.1.5	INTEGER	read-write	T304 timer - setup ack received info sent alert Recommandation Q.931, TABLE 9-1/Q931. Default Value is 20000 milliSeconds
INT isdnTmrT305	1.3.6.1.4.1.4618.1.2.2.2.1.1.6	INTEGER	read-write	T305 timer - disc w/ prog ind sent or disc sent Recommandation Q.931, TABLE 9-1/Q931. Default Value is 30000 milliSeconds
INT isdnTmrT306	1.3.6.1.4.1.4618.1.2.2.2.1.1.7	INTEGER	read-write	T306 timer - disc without prog ind sent Recommandation Q.931, TABLE 9-1/Q931. Default Value is 30000 milliSeconds
INT isdnTmrT307	1.3.6.1.4.1.4618.1.2.2.2.1.1.8	INTEGER	read-write	T307 timer - iusp ack sent Recommandation Q.931, TABLE 9-1/Q931. Default Value is 180000 milliSeconds
INT isdnTmrT308	1.3.6.1.4.1.4618.1.2.2.2.1.1.9	INTEGER	read-write	T308 timer - release sent Recommandation Q.931, TABLE 9-1/Q931. Default Value is 4000 milliSeconds
INT isdnTmrT310	1.3.6.1.4.1.4618.1.2.2.2.1.1.10	INTEGER	read-write	T310 timer - call proc received Recommandation Q.931, TABLE 9-1/Q931. Default Value is 10000 milliSeconds
INT isdnTmrT311	1.3.6.1.4.1.4618.1.2.2.2.1.1.11	INTEGER	read-only	T310 timer - call proc received, not in the network side
INT isdnTmrT312	1.3.6.1.4.1.4618.1.2.2.2.1.1.12	INTEGER	read-write	T312 timer - setup sent on broadcast Recommandation Q.931, TABLE 9-1/Q931. Default Value is 6000 milliSeconds
INT isdnTmrT313	1.3.6.1.4.1.4618.1.2.2.2.1.1.13	INTEGER	read-write	T313 timer - conn sent, not in BellCore network side
INT isdnTmrT316	1.3.6.1.4.1.4618.1.2.2.2.1.1.14	INTEGER	read-write	T316 timer - restart sent interface Recommandation Q.931, TABLE 9-1/Q931. Default Value is 120000 milliSeconds
INT isdnTmrT316C	1.3.6.1.4.1.4618.1.2.2.2.1.1.18	INTEGER	read-only	T316c Timer -Restart sent to individual channel
INT isdnTmrT318	1.3.6.1.4.1.4618.1.2.2.2.1.1.15	INTEGER	read-write	T318 timer - resume sent, not in bellcore network side
INT isdnTmrT319	1.3.6.1.4.1.4618.1.2.2.2.1.1.16	INTEGER	read-write	T319 timer - suspend sent, not in Bellcore network side
INT isdnTmrT322	1.3.6.1.4.1.4618.1.2.2.2.1.1.17	INTEGER	read-write	T322 timer - stat enq sent Recommandation Q.931, TABLE 9-1/Q931. Default Value is 4000 milliSeconds
INT isdnTmrT330	1.3.6.1.4.1.4618.1.2.2.2.1.1.19	INTEGER	read-write	T330 Timer - Congestion with Upper
INT isdnTmrT331	1.3.6.1.4.1.4618.1.2.2.2.1.1.20	INTEGER	read-write	T331 Timer - Congestion with lower
INT isdnTmrT332	1.3.6.1.4.1.4618.1.2.2.2.1.1.21	INTEGER	read-write	T332 Timer - Service request sent
INT isdnTmrT396	1.3.6.1.4.1.4618.1.2.2.2.1.1.25	INTEGER	read-write	T396 Timer - t303 expired
INT isdnTmrT397	1.3.6.1.4.1.4618.1.2.2.2.1.1.26	INTEGER	read-write	T397 Timer - Information sent on permanent signal
INT isdnTmrTANS	1.3.6.1.4.1.4618.1.2.2.2.1.1.24	INTEGER	read-only	TAns Timer - Answer timer
INT isdnTmrTREST	1.3.6.1.4.1.4618.1.2.2.2.1.1.23	INTEGER	read-write	TREST Timer - Disconnect indication sent while NI2 restarting interface
INT isdnTmrTRST	1.3.6.1.4.1.4618.1.2.2.2.1.1.22	INTEGER	read-only	TRst Timer - Disconnect indication sent while restarting interface
INT isdnTnkId	1.3.6.1.4.1.4618.1.2.2.2.1.1.1	INTEGER	read-write	Trunk id.
INT isdnTnkMgmntId	1.3.6.1.4.1.4618.1.2.2.2.4.3.1.1	INTEGER	read-only	Isdn Trunk id.
INT isdnTrnkId	1.3.6.1.4.1.4618.1.2.6.3.3.1.1.1	INTEGER	read-only	The ISDN Trunk Id for which the Trace Function is to be applied.
ISD isdnTrnkMgmntCmd	1.3.6.1.4.1.4618.1.2.2.2.4.1.1.2	IsdnTrnkMgtOperation	read-write	Management Command for Enabling/Disabling the specified trunk group. This command will make all the channels in this trunk available The possible options are : 1) Enable 2) Disable [default]
isdnTrnkMgmntEntry	1.3.6.1.4.1.4618.1.2.2.2.4.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
INT isdnTrnkMgmntId	1.3.6.1.4.1.4618.1.2.2.2.4.1.1.1	INTEGER	read-only	Trunk id.
isdnTrnkMgmntTable	1.3.6.1.4.1.4618.1.2.2.2.4.1		not-accessible	ISDN Trunk Management Table. The Management Commands for ISDN Trunk(s) in MSSC are provided in this table. This table has the index isdnTrnkMgmntId (Integer).
OPS isdnTrnkTmrOpStatus	1.3.6.1.4.1.4618.1.2.2.2.1.1.28	OpStatus	read-only	Current Status (Operational Status) of this Isdn Timer. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
TMR isdnTrnkTmrRowStatus	1.3.6.1.4.1.4618.1.2.2.2.1.1.27	TmrRowStatus	read-write	Current Status (configurational Status) of this Isdn Trunk Timer. To Modify any Timer for this Trunk, the only option is 'MODIFYTIMER'. For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) notready 4) modified 5) up 6) do
isdnTrnkTrace	1.3.6.1.4.1.4618.1.2.6.3.3
isdnTrunkCfgEntry	1.3.6.1.4.1.4618.1.2.2.2.2.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
isdnTrunkCfgTable	1.3.6.1.4.1.4618.1.2.2.2.2		not-accessible	ISDN Trunk Table. Information about the ISDN Trunk(s) in MSSC are provided in this table. The index of this table is isdnTrunkId (Integer)
ENA isdnTrunkEnable	1.3.6.1.4.1.4618.1.2.6.3.3.1.1.3	EnableTrace	read-write	This option enables/disables the trace Functions for the specified ISDN Trunk. The possible option are: 1) Enable 2) Disable [default]
INT isdnTrunkGrpId	1.3.6.1.4.1.4618.1.2.2.2.2.1.3	INTEGER	read-write	Trunk Group id to which the trunk belongs. Can be any integer 1-65535.
INT isdnTrunkId	1.3.6.1.4.1.4618.1.2.2.2.2.1.1	INTEGER	read-write	Trunk id. Can be any integer 1-65535.
LOG isdnTrunkLog	1.3.6.1.4.1.4618.1.2.6.3.3.1.1.2	LogType	read-only	This option displays weather log Function is enabled for the specified ISDN Trunk.
INT isdnTrunkMgmntId	1.3.6.1.4.1.4618.1.2.2.2.4.2.1.1	INTEGER	read-only	Trunk id.
STR isdnTrunkName	1.3.6.1.4.1.4618.1.2.2.2.2.1.2	NameString	read-write	Trunk name. Can be any combinaton of alphanumeric characters. Spaces are not allowed.
ISD isdnTrunkOpStatus	1.3.6.1.4.1.4618.1.2.2.2.2.1.28	IsdnTrnkOpStatus	read-only	Current Status (Operational Status) of this ISDN Trunk. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down 3) disable
ROW isdnTrunkRowStatus	1.3.6.1.4.1.4618.1.2.2.2.2.1.27	RowStatus	read-write	Current Status (configurational Status) of this ISDN TRUNK. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) n
isdnTrunkTraceEntry	1.3.6.1.4.1.4618.1.2.6.3.3.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
isdnTrunkTraceTable	1.3.6.1.4.1.4618.1.2.6.3.3.1		not-accessible	This Table is specified for Applying Trace Function for any ISDN Trunk(s). The index of this table is isdnTrnkId (Integer)
ISD isdnTrunkType	1.3.6.1.4.1.4618.1.2.2.2.2.1.5	IsdnType	read-write	Trunk Type (nfas/fas).
INT isdnXconnectId	1.3.6.1.4.1.4618.1.2.2.2.2.1.6	INTEGER	read-write	Xconnect id
isup	1.3.6.1.4.1.4618.1.2.2.1.5
NTF isupIccAuditNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.117			ISUP ICC Audit Notify
isupTimerCfgEntry	1.3.6.1.4.1.4618.1.2.2.1.5.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
isupTimerCfgTable	1.3.6.1.4.1.4618.1.2.2.1.5.1		not-accessible	Isup Timer Table. The Information about ISUPTimers in MSSC are provided in this table. User can Modify Timer(s) from this table. This table has one index: isupTmrSS7Type (TimerType).
MOD isupTimerRowStatus	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.32	ModifyTmrStatus	read-write	This is a command to MODIFY a Timer. A 'GET' operation on this object will display the default value [no action]. The possible option for 'SET' operation is: 1)modify
TIM isupTimerType	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.1	TimerType	read-write	Index for this IsupTimer Table, is an enumerated data type ansi(1), itu(2)
INT isupTmrT1	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.2	INTEGER	read-write	T1 timer - release sent, GR-246-CORE, Issue 2, December 1997. Default Value is 4000 milliSeconds
INT isupTmrT18	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.9	INTEGER	read-write	T18 timer - group blocking sent GR-246-CORE, Issue 2, December 1997. Default Value is 4000 milliSeconds
INT isupTmrT19	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.10	INTEGER	read-write	T19 timer - initial group blocking sent GR-246-CORE, Issue 2, December 1997. Default Value is 60000 milliSeconds
INT isupTmrT2	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.3	INTEGER	read-write	T2 timer - suspend received, GR-246-CORE, Issue 2, December 1997. Default Value is 0 milliSeconds
INT isupTmrT20	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.11	INTEGER	read-write	T20 timer - group unblocking sent GR-246-CORE, Issue 2, December 1997. Default Value is 4000 milliSeconds
INT isupTmrT21	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.12	INTEGER	read-write	T21 timer - initial group unblocking sent GR-246-CORE, Issue 2, December 1997. Default Value is 60000 milliSeconds
INT isupTmrT22	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.13	INTEGER	read-write	T22 timer - group reset sent GR-246-CORE, Issue 2, December 1997. Default Value is 4000 milliSeconds
INT isupTmrT23	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.14	INTEGER	read-write	T23 timer - initial group reset sent GR-246-CORE, Issue 2, December 1997. Default Value is 60000 milliSeconds
INT isupTmrT27	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.15	INTEGER	read-write	T27 timer - waiting for continuity recheck GR-246-CORE, Issue 2, December 1997. Default Value is 200000 milliSeconds
INT isupTmrT28	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.16	INTEGER	read-write	T28 timer - circuit group query sent GR-246-CORE, Issue 2, December 1997. Default Value is 10000 milliSeconds
INT isupTmrT31	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.17	INTEGER	read-write	T31 timer - call reference frozen period GR-246-CORE, Issue 2, December 1997. Default Value is 360000 milliSeconds
INT isupTmrT33	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.18	INTEGER	read-write	T33 timer - INR sent GR-246-CORE, Issue 2, December 1997. Default Value is 12000 milliSeconds
INT isupTmrT34	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.19	INTEGER	read-write	T34 timer - currently unknown. Default Value is 10000 milliSeconds
INT isupTmrT36	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.20	INTEGER	read-write	T36 timer - waiting for continuity after recheck, in bellcore it is T34 GR-246-CORE, Issue 2, December 1997. Default Value is 2000 milliSeconds
INT isupTmrT5	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.4	INTEGER	read-write	T5 timer - initial release sent GR-246-CORE, Issue 2, December 1997. Default Value is 60000 milliSeconds
INT isupTmrT6	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.5	INTEGER	read-write	T6 timer - suspend received GR-246-CORE, Issue 2, December 1997. Default Value is 10000 milliSeconds
INT isupTmrT7	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.6	INTEGER	read-write	T7 timer - latest address sent GR-246-CORE, Issue 2, December 1997. Default Value is 20000 milliSeconds
INT isupTmrT8	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.7	INTEGER	read-write	T8 - timer initial address received GR-246-CORE, Issue 2, December 1997. Default Value is 10000 milliSeconds
INT isupTmrT9	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.8	INTEGER	read-write	T9 timer - latest address sent after ACM GR-246-CORE, Issue 2, December 1997. Default Value is 120000 milliSeconds
INT isupTmrTCCR	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.21	INTEGER	read-write	tCCR timer - continuity recheck timer GR-246-CORE, Issue 2, December 1997. Default Value is 20000 milliSeconds
INT isupTmrTCCRt	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.25	INTEGER	read-write	TCCRt timer - tCCR timer (o/g side). Default Value is 0 milliSeconds
INT isupTmrTCRA	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.24	INTEGER	read-write	TCRA timer - circuit reservation acknowledgement sent. GR-246-CORE, Issue 2, December 1997. Default Value is 20000 milliSeconds
INT isupTmrTCRM	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.23	INTEGER	read-write	TCRM timer - circuit reservation message sent. GR-246-CORE, Issue 2, December 1997. Default Value is 3000 milliSeconds
INT isupTmrTECt	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.26	INTEGER	read-only	tECT timer - Explicit Call Transfer -wait for loop prvnt rsp. Default Value is 0 milliSeconds
INT isupTmrTEX	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.22	INTEGER	read-only	TEX timer - Exit to be sent, currently not applicable
INT isupTmrTFGR	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.29	INTEGER	read-only	TFGR timer - first group received timer GR-246-CORE, Issue 2, December 1997
INT isupTmrTFNLRELRS	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.31	INTEGER	read-only	Time tFNLRELRSP - Awaiting for final release response. Default Value is 0 milliSeconds
INT isupTmrTGRES	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.28	INTEGER	read-write	TGRS timer - at receipt of circuit group reset message, treat subsequent circuit group reset messages new only on this timer expiration.
INT isupTmrTGTCHG	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.27	INTEGER	read-only	Timer tGTCHG - Awaiting charging extended acknowledgement after having sent CHGE
INT isupTmrTRELRSP	1.3.6.1.4.1.4618.1.2.2.1.5.1.1.30	INTEGER	read-only	Time tRELRSP - Awaiting for release response. Default Value is 0 milliSeconds
LIN linkMgmntCmd	1.3.6.1.4.1.4618.1.2.2.1.1.5.1.2	LinkControlStatus	read-write	Management Command for Inhibiting/UnInhibiting link. The possible options are : 1) Inhibit 2) UnInhibit 3) Noaction [default]
STR linkName	1.3.6.1.4.1.4618.1.2.2.1.1.5.1.1	NameString	read-only	SS7 Link Name
INT linksetId	1.3.6.1.4.1.4618.1.2.2.1.1.4.1.1	INTEGER	read-only	SS7 Linkset Id
LEV linksetLevel	1.3.6.1.4.1.4618.1.2.2.1.1.4.1.2	Level	read-write	This option deactivates the linkset at level 1 or level 2. Level 2 is for layer 2 only. The option available are: 1) Level 1 (level-1) [Default] 2) Level 2 (level-2)
LIN linksetMgmntCmd	1.3.6.1.4.1.4618.1.2.2.1.1.4.1.3	LinkSetControlStatus	read-write	Management Command for Activing/DeActiving call on this linkset. The possible options are : 1) Active 2) Deactive 3) Noaction [default]
lnp	1.3.6.1.4.1.4618.1.2.5.2
log	1.3.6.1.4.1.4618.1.2.6.2
LOG logAttribute	1.3.6.1.4.1.4618.1.2.6.2.3.1	LogFileAttr	read-write	Allows the user to inquire about the current LOG file attributes. The possible options are : 1) ALARM_LOG 2) AUDIT_LOG 3) MEAS_LOG 4) DIAG_LOG 5) SCRTY_LOG 6) EVENT_LOG 7) BILL_LOG 8) EMP_LOG Choose any one from drop down list..
NTF logDiskFull60PercentNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.80			Info : Log Files occupy 60% of disk quota
NTF logDiskFull70PercentNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.81			Info : Log Files occupy 70% of disk quota
NTF logDiskFull80PercentNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.82			Info : Log Files occupy 80% of disk quota
NTF logErrFileCloseNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.84			Info : Log file close error
NTF logErrFileDeleteNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.85			Info : Log file cannot be deleted
NTF logErrFileOpenNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.83			Info : Log file open error
NTF logErrFileWriteNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.86			Info : Log manager cannot write to log file
logFileAttribute	1.3.6.1.4.1.4618.1.2.6.2.3
INT logFileDuration	1.3.6.1.4.1.4618.1.2.6.2.3.3	INTEGER	read-only
logFileGenEnable	1.3.6.1.4.1.4618.1.2.6.2.2
logFileInfo	1.3.6.1.4.1.4618.1.2.6.2.1
NTF logFileReadyNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.79			Info : Logger file is ready
INT logFileSize	1.3.6.1.4.1.4618.1.2.6.2.3.2	INTEGER	read-only
INT logFileStatus	1.3.6.1.4.1.4618.1.2.6.2.3.4	INTEGER	read-only
INT logGenTime	1.3.6.1.4.1.4618.1.2.6.2.1.1	INTEGER	read-write	Switch Log Generation Time. The Parameter Time-interval determines the period of generating new log files. When the time interval is reached, all the current open log files are closed and new log files are generated for future log. The unit for the ti
INT logPurgeTime	1.3.6.1.4.1.4618.1.2.6.2.1.2	INTEGER	read-write	Switch Log Deletion Time. The Parameter Time-interval determines the period of purging old log files. When the time interval is reached, all the log files older than this time-interval are deleted. The unit for the time-interval is 'minute'.
lrnEntry	1.3.6.1.4.1.4618.1.2.5.2.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
STR lrnNum	1.3.6.1.4.1.4618.1.2.5.2.1.1.1	DisplayString	read-write	The Local Routing Number (LRN) Id.
LRN lrnRowStatus	1.3.6.1.4.1.4618.1.2.5.2.1.1.2	LrnRowStatus	read-write	The Local Routing Number (LRN) Number.
lrnTable	1.3.6.1.4.1.4618.1.2.5.2.1		not-accessible	Local Routing Number Table. This Table provides information about Local Routing number in MSSC. This table has the index lrnId (Integer)
NTF measDiskOverCrtclThresholdNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.37			Info : The partition that the measurement file resides on is over critical threshold.
measFile	1.3.6.1.4.1.4618.1.2.3.1
STR measFileAcknowledge	1.3.6.1.4.1.4618.1.2.3.1.1.1	DisplayString	read-write	Acknowledgement of the receiving of the specified Measurement file
INT measFileCfgMeasInterval	1.3.6.1.4.1.4618.1.2.3.1.2.1	INTEGER	read-write	Switch Config Measure Interval. The duration of the collection window (frequency of persisting collected measurements). Default: 15 minutes. Valid Values: 15, 30, 60 minutes. 0 for Disable.
STR measFileCfgPrimaryDir	1.3.6.1.4.1.4618.1.2.3.1.2.5	DisplayString	read-only	Measurement File Primary Dir. Measurement file is written in this directory
INT measFileCfgPurgeDay	1.3.6.1.4.1.4618.1.2.3.1.2.3	INTEGER	read-write	File Config Purge Day. After The specified no of days the file in secondary directory are purged if Measurement File Auto Purge Flag is on.
MEA measFileCfgPurgeFlag	1.3.6.1.4.1.4618.1.2.3.1.2.4	MeasPurgeFlag	read-write	File Config Flag. This is an auto purge flag.
STR measFileCfgSecondaryDir	1.3.6.1.4.1.4618.1.2.3.1.2.6	DisplayString	read-only	Measurement File Secondary Dir. Measurement file is moved to this directory from Primary Directory after receving the acknowledgement.
INT measFileCfgUsagescanInterval	1.3.6.1.4.1.4618.1.2.3.1.2.2	INTEGER	read-write	Switch Config Usage Scan Interval. The interval between scanning the trunk for usage counts. Default: 15 seconds Valid Values: 5 through 300 seconds.
measFileConfig	1.3.6.1.4.1.4618.1.2.3.1.2
NTF measFileDeleteErrNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.42			Info : Measurement delete file error
NTF measFileDeleteNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.41			Info : Measurement file deleted
measFileEnableGrp	1.3.6.1.4.1.4618.1.2.3.1.3
MEA measFileEnableISUPIneffectiveCall	1.3.6.1.4.1.4618.1.2.3.1.3.4	MeasEnableStatus	read-write	Measurement File Enable PRI Ineffective Call Group. A mechanism for the user to enable collecting of ISUP Ineffective Call Group Traffic measurement data.
MEA measFileEnableISUPTraffic	1.3.6.1.4.1.4618.1.2.3.1.3.2	MeasEnableStatus	read-write	Measurement File ISUP Traffic Enable Group. A mechanism for the user to enable collecting of ISUP Traffic measurement data.
MEA measFileEnablePRIIneffectiveCall	1.3.6.1.4.1.4618.1.2.3.1.3.3	MeasEnableStatus	read-write	Measurement File Enable PRI Ineffective Call Group. A mechanism for the user to enable collecting of PRI Ineffective Call Group measurement data.
MEA measFileEnablePRITraffic	1.3.6.1.4.1.4618.1.2.3.1.3.1	MeasEnableStatus	read-write	Measurement File PRI Traffic Enable Group. A mechanism for the user to enable collecting of PRI Traffic measurement data.
MEA measFileEnableSS7LinkTraffic	1.3.6.1.4.1.4618.1.2.3.1.3.6	MeasEnableStatus	read-write	Measurement File Enable SS7 Link Traffic Group. A mechanism for the user to enable collecting of SS7 Link Traffic measurement data.
MEA measFileEnableTrunkGrp	1.3.6.1.4.1.4618.1.2.3.1.3.5	MeasEnableStatus	read-write	Measurement File Enable Trunk Group. A mechanism for the user to enable collecting of Trunk Group Traffic measurement data.
measFileInfo	1.3.6.1.4.1.4618.1.2.3.1.1
NTF measFileMoveErrNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.39			Info : Error in moving Measurement file to secondary directory
NTF measFileMoveNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.38			Info : Measurement file moved to secondary directory
NTF measFileOpenErrNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.40			Info : Measurement open file error
NTF measFileReadyNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.36			Info : Measurement file is ready for FTP
INT measLinkDataSuspect	1.3.6.1.4.1.4618.1.2.3.4.1.1.2	INTEGER	read-only	Link Data Suspect. Boolean value indicating if the measurement data set is suspect. Suspect data is that which may or may not be accurate and cannot be verified accurate due to some condition that occurred during the collection interval.
INT measLinkInServiceDuration	1.3.6.1.4.1.4618.1.2.3.4.1.1.4	INTEGER	read-only	Link In Service Duration. The cumulative time (in seconds) during which the link was in the in-service state. A link is said to be in- service when it is capable of transmitting MSUs. This measurement includes periods when no MSUs are available for tra
INT measLinkLostMSUsBufferOverflow	1.3.6.1.4.1.4618.1.2.3.4.1.1.8	INTEGER	read-only	Link Lost MSUs Buffer Overflow. The number of MSUs lost because of transmission buffer overflow (CS)
INT measLinkMSUsDiscarded	1.3.6.1.4.1.4618.1.2.3.4.1.1.9	INTEGER	read-only	Link MSUs Discarded. This measurement is a count of number of MSUs discarded.
INT measLinkMSUsRetransmitted	1.3.6.1.4.1.4618.1.2.3.4.1.1.5	INTEGER	read-only	Link MSUs Retransmitted. The number of MSUs retransmitted via a particular link during the associated time period (CS)
STR measLinkName	1.3.6.1.4.1.4618.1.2.3.4.1.1.1	NameString	read-only	SS7 Link name
INT measLinkOctectsTransmitted	1.3.6.1.4.1.4618.1.2.3.4.1.1.7	INTEGER	read-only	Link Octets Transmitted. The number of SIF and SIO octets transmitted (including those retransmitted) on the associated incoming link (CS)
INT measLinkOctetsReceived	1.3.6.1.4.1.4618.1.2.3.4.1.1.6	INTEGER	read-only	Link Octers Received. The number of SIF and SIO octets received on the associate incoming link (CS)
measLinkTrafficEntry	1.3.6.1.4.1.4618.1.2.3.4.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
measLinkTrafficTable	1.3.6.1.4.1.4618.1.2.3.4.1		not-accessible	Switch Measurement per SS7 Link traffic Table. Information about traffic measurement per SS7 Link are provoded in this table. The index for this table is measLinkName(String).
INT measLinkUnavailableDuration	1.3.6.1.4.1.4618.1.2.3.4.1.1.3	INTEGER	read-only	Link Unavailable Duration. The cumulative time (in sconds) that the link was unavailable during the associated time interval (CS)
measLnk	1.3.6.1.4.1.4618.1.2.3.4
measSwitch	1.3.6.1.4.1.4618.1.2.3.2
CTR measSwitchIsupDataSuspect	1.3.6.1.4.1.4618.1.2.3.2.1.1	Counter	read-only	Switch Isup Data Suspect. Boolean value indicating if the measurement data set is suspect. Suspect data is that which may or may not be accurate and cannot be verified accurate due to a some condition that occurred during the collection interval
CTR measSwitchIsupFailCallAnsiCalledPartyLineBusy	1.3.6.1.4.1.4618.1.2.3.2.2.4	Counter	read-only	Switch Isup Fail Call Ansi Called Party Line Busy. The number of ISUP-ANSI calls that result in a called party busy indication returned to the caller.
CTR measSwitchIsupFailCallAnsiIneffectiveMachineAttempts	1.3.6.1.4.1.4618.1.2.3.2.2.5	Counter	read-only	Switch Isup Fail Call Ansi Ineffective Machine Attempts. The number of ISUP-ANSI call ineffective machine attempts that have not been associated with any of the following: * Matching loss * No circuit * Called party line busy.
CTR measSwitchIsupFailCallAnsiMatchingLoss	1.3.6.1.4.1.4618.1.2.3.2.2.2	Counter	read-only	Switch Isup Fail Call Ansi Matching Loss. The number of calls ISUP-ANSI trunk calls that fail to find a linked cross-connect within XCMs on any stage of the call.
CTR measSwitchIsupFailCallAnsiNoCircuit	1.3.6.1.4.1.4618.1.2.3.2.2.3	Counter	read-only	Switch Isup Fail Call Ansi No Circuit. The number of ISUP-ANSI calls that cannot forwarded on a trunk because: * No idle PRI trunks available * No cross-connect available between XCMs.
CTR measSwitchIsupFailCallDataSuspect	1.3.6.1.4.1.4618.1.2.3.2.2.1	Counter	read-only	Switch Isup Fail Call Data Suspect. Boolean value indicating if the measurement data set is suspect. Suspect data is that which may or may not be accurate and cannot be verified accurate due to a some condition that occurred during the collection inte
measSwitchIsupFailCallGrp	1.3.6.1.4.1.4618.1.2.3.2.2
CTR measSwitchIsupFailCallItutCalledPartyLineBusy	1.3.6.1.4.1.4618.1.2.3.2.2.8	Counter	read-only	Switch Isup Fail Call Itut Called Party Line Busy. The number of ISUP-ITUT calls that result in a called party busy indication returned to the caller.
CTR measSwitchIsupFailCallItutIneffectiveMachineAttempts	1.3.6.1.4.1.4618.1.2.3.2.2.9	Counter	read-only	Switch Isup Fail Call Itut Ineffective Machine Attempts. The number of ISUP-ITUT call ineffective machine attempts that have not been associated with any of the following: * Matching loss * No circuit * Called party line busy.
CTR measSwitchIsupFailCallItutMatchingLoss	1.3.6.1.4.1.4618.1.2.3.2.2.6	Counter	read-only	Switch Isup Fail Call Itut Matching Loss. The number of calls ISUP-ITUT trunk calls that fail to find a linked cross-connect within XCMs on any stage of the call.
CTR measSwitchIsupFailCallItutNoCircuit	1.3.6.1.4.1.4618.1.2.3.2.2.7	Counter	read-only	Switch Isup Fail Call Itut No Circuit. The number of ISUP-ITUT calls that cannot be forwarded on a trunk because: * No idle PRI trunks available * No cross-connect available between XCMs.
measSwitchIsupGrp	1.3.6.1.4.1.4618.1.2.3.2.1
CTR measSwitchIsupIncomingAnsiTrunkCallAnswered	1.3.6.1.4.1.4618.1.2.3.2.1.3	Counter	read-only	Switch Isup Incoming Ansi Trunk Call Answered. The number of incoming ISUP-ANSI trunk calls answered.
CTR measSwitchIsupIncomingAnsiTrunkCallAttempts	1.3.6.1.4.1.4618.1.2.3.2.1.2	Counter	read-only	Switch Isup Incoming Ansi Trunk Call Attempts. The number of incoming ISUP-ANSI trunk call requests.
CTR measSwitchIsupIncomingItutTrunkCallAnswered	1.3.6.1.4.1.4618.1.2.3.2.1.7	Counter	read-only	Switch Isup Incoming Itut Trunk Call Answered. The number of incoming ISUP-ITUT trunk calls answered.
CTR measSwitchIsupIncomingItutTrunkCallAttempts	1.3.6.1.4.1.4618.1.2.3.2.1.6	Counter	read-only	Switch Isup Incoming Itut Trunk Call Attempts. The number of incoming ISUP-ITUT trunk call requests.
CTR measSwitchIsupOutgoingAnsiTrunkCallAnswered	1.3.6.1.4.1.4618.1.2.3.2.1.5	Counter	read-only	Switch Isup Outgoing Ansi Trunk Call Answered. The number of outgoing ISUP-ANSI trunk calls answered.
CTR measSwitchIsupOutgoingAnsiTrunkCallAttempts	1.3.6.1.4.1.4618.1.2.3.2.1.4	Counter	read-only	Switch Isup Outgoing Ansi Trunk Call Attempts. The number of outgoing ISUP-ANSi trunk call requests.
CTR measSwitchIsupOutgoingItutTrunkCallAnswered	1.3.6.1.4.1.4618.1.2.3.2.1.9	Counter	read-only	Switch Isup Outgoing Itut Trunk Call Answered. The number of outgoing ISUP-ITUT trunk calls answered.
CTR measSwitchIsupOutgoingItutTrunkCallAttempts	1.3.6.1.4.1.4618.1.2.3.2.1.8	Counter	read-only	Switch Isup Outgoing Itut Trunk Call Attempts. The number of outgoing ISUP-ITUT trunk call requests.
CTR measSwitchPriDataSuspect	1.3.6.1.4.1.4618.1.2.3.2.3.1	Counter	read-only	Switch Primary Data Suspect. Boolean value indicating if the measurement data set is suspect. Suspect data is that which may or may not be accurate and cannot be verified accurate due to a some condition that occurred during the collection interval.
CTR measSwitchPriFailCallCalledPartyLineBusy	1.3.6.1.4.1.4618.1.2.3.2.4.4	Counter	read-only	Switch ISDN PRI Fail Call Called Party Line Busy. The number of PRI calls that result in a called party busy indication returned to the caller.
CTR measSwitchPriFailCallDataSuspect	1.3.6.1.4.1.4618.1.2.3.2.4.1	Counter	read-only	Switch ISDN PRI Fail Call Data Suspect. Boolean value indicating if the measurement data set is suspect. Suspect data is that which may or may not be accurate and cannot be verified accurate due to a some condition that occurred during the collection
measSwitchPriFailCallGrp	1.3.6.1.4.1.4618.1.2.3.2.4
CTR measSwitchPriFailCallIneffectiveMachineAttempts	1.3.6.1.4.1.4618.1.2.3.2.4.5	Counter	read-only	Switch ISDN PRI Fail Call Ineffective Machine Attempts. The number of PRI call ineffective machine attempts that have not been associated with any of the following: * Matching loss * No circuit * Called party line busy.
CTR measSwitchPriFailCallMatchingLoss	1.3.6.1.4.1.4618.1.2.3.2.4.2	Counter	read-only	Switch ISDN PRI Fail Call Matching Loss. The number of calls PRI trunk calls that fail to find a linked cross-connect within XCM on any stage of the call.
CTR measSwitchPriFailCallNoCircuit	1.3.6.1.4.1.4618.1.2.3.2.4.3	Counter	read-only	Switch ISDN PRI Fail Call No Circuit. The number of PRI calls that cannot be forwarded on a trunk because: * No idle PRI trunks available * No cross-connect available between XCMs.
measSwitchPriGrp	1.3.6.1.4.1.4618.1.2.3.2.3
CTR measSwitchPriIncomingIsdnPRICallAnswered	1.3.6.1.4.1.4618.1.2.3.2.3.3	Counter	read-only	Switch PRI Incoming ISDN PRI Call Answered. The number of Incoming ISDN trunk calls answered.
CTR measSwitchPriIncomingIsdnPRICallAttempts	1.3.6.1.4.1.4618.1.2.3.2.3.2	Counter	read-only	Switch PRI Incoming ISDN PRI Call Attempts. The number of Incoming ISDN trunk call requests.
measTrnkGrp	1.3.6.1.4.1.4618.1.2.3.3
INT measTrnkGrpDataSuspect	1.3.6.1.4.1.4618.1.2.3.3.1.1.2	INTEGER	read-only	Trunk Group Data Suspect. Boolean value indicating if the measurement data set is suspect. Suspect data is that which may or may not be accurate and cannot be verified accurate due to some condition that occurred during the collection interval.
INT measTrnkGrpincomingUsage	1.3.6.1.4.1.4618.1.2.3.3.1.1.3	INTEGER	read-only	Trunk Group Incoming Usage. The sum of the counts of the number of incoming trunks in the use.
INT measTrnkGrpISCicsChnls	1.3.6.1.4.1.4618.1.2.3.3.1.1.5	INTEGER	read-only	Trunk Group Inservice Cic/Channels. The sum of the counts of the number of Inservice circuits in case SS7 TrunkGroup or Inservice Channels in case of ISDN TRunkGroup.
INT measTrnkGrpmaintainanceUsage	1.3.6.1.4.1.4618.1.2.3.3.1.1.8	INTEGER	read-only	Trunk Group Maintenance Usage. The sum of number of trunk in use for any reason other than traffic.
STR measTrnkGrpName	1.3.6.1.4.1.4618.1.2.3.3.1.1.1	DisplayString	read-only	Trunk Group Name. Can be any combination of alphanumeric characters. Spaces are not allowed and cannot exceed 15 characters.
INT measTrnkGrpOOSCicsChnls	1.3.6.1.4.1.4618.1.2.3.3.1.1.6	INTEGER	read-only	Trunk Group OutOfservice Cic/Channels. The sum of the counts of the number of OutOfservice circuits in case SS7 TrunkGroup or OufOfservice Channels in case of ISDN TRunkGroup.
INT measTrnkGrpoutgoingUsage	1.3.6.1.4.1.4618.1.2.3.3.1.1.4	INTEGER	read-only	Trunk Group Outgoing Usage. The sum of the counts of the number of outgoing trunks in the use.
INT measTrnkGrptotalUsage	1.3.6.1.4.1.4618.1.2.3.3.1.1.7	INTEGER	read-only	Trunk Group Total Usage. The sum of number of trunk in use by both incoming and outgoing traffic.
measTrnkGrpTrafficEntry	1.3.6.1.4.1.4618.1.2.3.3.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
measTrnkGrpTrafficTable	1.3.6.1.4.1.4618.1.2.3.3.1		not-accessible	Switch Measurement for Trunk Group traffic Table. Information about Trunk Group traffic measurement are provoded in this table. The index for this table is measTrnkGrpName(String).
NTF mfdClearNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.34			Info : A potential fault modem is cleared
NTF mfdDetectionNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.35			Info : Faulty Modem: A Potential Faulty Modem has been Detected
ENA mfdMgmntCmd	1.3.6.1.4.1.4618.1.2.2.2.4.3.1.4	EnableOperation	read-write	Management Command for Enabling/Disabling 'MODEM FAULT DETECTION' feature in MSSC. The possible options are : 1) Enable 2) Disable [default]
mfdMgmntEntry	1.3.6.1.4.1.4618.1.2.2.2.4.3.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
mfdMgmntTable	1.3.6.1.4.1.4618.1.2.2.2.4.3		not-accessible	Modem Fault Management Table. The Management Commands for Modem(s) in MSSC are provided in this table. This table has the index isdnTnkMgmntId (Integer).
modemFaultDetection	1.3.6.1.4.1.4618.1.2.5.1
modemStatusEntry	1.3.6.1.4.1.4618.1.2.5.1.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
modemStatusTable	1.3.6.1.4.1.4618.1.2.5.1.1		not-accessible	Faulty Modem Detection Table. This Table provides information about all the potentially faulty modems in MSSC. This table has two indices: faultModemTrnkId and faultModemChnlId (both Integer)
NTF msscBakPsuDownNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.94			Info : Backup hosts power supply down
NTF msscBakPsuUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.93			Info : Backup hosts power supply up
NTF msscBckHostFanDownNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.102			Info : Backup Fan Down
NTF msscBckHostFanUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.101			Info : Backup Fan Up
NTF msscPriDedicatedLinkDownNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.88			Info : Dedicated link between the 2 Netra machine is down
NTF msscPriDedicatedLinkUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.87			Info : Dedicated link between the 2 Netra machine is UP
NTF msscPriHostFanDownNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.100			Info : Primary Fan Down
NTF msscPriHostFanUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.99			Info : Primary Fan Up
NTF msscPriLanPhyIntfDownNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.96			Info : Primary Physical LAN Interface Down
NTF msscPriLanPhyIntfUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.95			Info : Primary Physical LAN Interface Up
NTF msscPriPsuDownNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.92			Info : Primary hosts power supply down
NTF msscPriPsuUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.91			Info : Primary hosts power supply up
NTF msscSecDedicatedLinkDownNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.90			Info :Dedicated link between the 2 Netra machine is down
NTF msscSecDedicatedLinkUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.89			Info : Dedicated link between the 2 Netra machine is UP
NTF msscSecLanPhyIntfDownNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.98			Info : Secondary Physical LAN Interface Down
NTF msscSecLanPhyIntfUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.97			Info : Secondary physical LAN Interface Up
mtp2	1.3.6.1.4.1.4618.1.2.2.1.3
INT mtp2LinkId	1.3.6.1.4.1.4618.1.2.2.1.3.1.1.1	INTEGER	read-write	Link id. Can be any integer 1-65535.
mtp2LinkTmrCfgEntry	1.3.6.1.4.1.4618.1.2.2.1.3.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
mtp2LinkTmrCfgTable	1.3.6.1.4.1.4618.1.2.2.1.3.1		not-accessible	MTP2 Link Timer Table. The Information about MTP2 Link Timers in MSSC are provided in this table. User can Modify Timer(s) from this table. This table has one index: mtp2LinkId (Integer).
OPS mtp2OpStatus	1.3.6.1.4.1.4618.1.2.2.1.3.1.1.11	OpStatus	read-only	Current Status (Operational Status) of this MTP2 Link Timer. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
TMR mtp2RowStatus	1.3.6.1.4.1.4618.1.2.2.1.3.1.1.10	TmrRowStatus	read-write	Current Status (configurational Status) of this MTP2 Link Timer. To Modify any Timer for this link, the only option is 'MODIFYTIMER'. For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) notready 4) modified 5) up 6) down
INT mtp2T1	1.3.6.1.4.1.4618.1.2.2.1.3.1.1.2	INTEGER	read-write	t1 timer - for aligned ready condition GR-606-CORE, ISSUE 1, June 1994. Default Value is 13000 milliSeconds
INT mtp2T2	1.3.6.1.4.1.4618.1.2.2.1.3.1.1.3	INTEGER	read-write	t2 timer - Timer for out-of-alignment GR-606-CORE, ISSUE 1, June 1994. Default Value is 11500 milliSeconds
INT mtp2T3	1.3.6.1.4.1.4618.1.2.2.1.3.1.1.4	INTEGER	read-write	t3 timer - Timer for aligned condition GR-606-CORE, ISSUE 1, June 1994. Default Value is 11500 milliSeconds
INT mtp2T4e	1.3.6.1.4.1.4618.1.2.2.1.3.1.1.6	INTEGER	read-write	t4e timer - Emergency proving period GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSeconds
INT mtp2T4n	1.3.6.1.4.1.4618.1.2.2.1.3.1.1.5	INTEGER	read-write	t4n timer - Normal proving period GR-606-CORE, ISSUE 1, June 1994. Default Value is 2000 milliSeconds
INT mtp2T5	1.3.6.1.4.1.4618.1.2.2.1.3.1.1.7	INTEGER	read-write	t5 timer - Busy status transmission interval GR-606-CORE, ISSUE 1, June 1994. Default Value is 100 milliSeconds
INT mtp2T6	1.3.6.1.4.1.4618.1.2.2.1.3.1.1.8	INTEGER	read-write	t6 timer - Supervision of remote congestion timer GR-606-CORE, ISSUE 1, June 1994. Default Value is 3000 milliSeconds
INT mtp2T7	1.3.6.1.4.1.4618.1.2.2.1.3.1.1.9	INTEGER	read-write	t7 timer - Excessive delay of ack GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSeconds
mtp3	1.3.6.1.4.1.4618.1.2.2.1.4
mtp3GenTmrCfgGroup	1.3.6.1.4.1.4618.1.2.2.1.4.1
MOD mtp3GenTmrRowStatus	1.3.6.1.4.1.4618.1.2.2.1.4.1.9	ModifyTmrStatus	read-write	This is a command to MODIFY a Timer. A 'GET' operation on this object will display the default value [no action]. The possible option for 'SET' operation is: 1)modify
mtp3LinkCfgEntry	1.3.6.1.4.1.4618.1.2.2.1.4.2.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
mtp3LinkCfgTable	1.3.6.1.4.1.4618.1.2.2.1.4.2		not-accessible	MTP3 Link Timer Table. The Information about MTP3 Link Timers in MSSC are provided in this table. User can Modify Timer(s) from this table. This table has one index: mtp3LinkId (Integer).
INT mtp3LinkId	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.1	INTEGER	read-write	Link id GR-606-CORE, ISSUE 1, June 1994
OPS mtp3OpStatus	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.26	OpStatus	read-only	Current Status (Operational Status) of this MTP3 Link Timer. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
TMR mtp3RowStatus	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.25	TmrRowStatus	read-write	Current Status (configurational Status) of this MTP3 Link Timer. To Modify any Timer for this link, the only option is 'MODIFYTIMER'. For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) notready 4) modified 5) up 6) down
INT mtp3T1	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.2	INTEGER	read-write	T1 timer - Transmission delay following changeover GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSeconds
INT mtp3T12	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.9	INTEGER	read-write	T12 timer - Uninhibit acknowledge timer GR-606-CORE, ISSUE 1, June 1994. Default Value is 1000 milliSeconds
INT mtp3T13	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.10	INTEGER	read-write	T13 timer - Forced uninhibit ack timer GR-606-CORE, ISSUE 1, June 1994. Default Value is 1000 milliSeconds.
INT mtp3T14	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.11	INTEGER	read-write	T14 timer - Inhibit ack timer GR-606-CORE, ISSUE 1, June 1994. Default Value is 3000 milliSeconds
INT mtp3T15	1.3.6.1.4.1.4618.1.2.2.1.4.1.1	INTEGER	read-write	T15 timer - Signal route set congestion test interval GR-606-CORE, ISSUE 1, June 1994. Default Value is 3000 milliSeconds
INT mtp3T16	1.3.6.1.4.1.4618.1.2.2.1.4.1.2	INTEGER	read-write	T16 timer - Transfer controlled update GR-606-CORE, ISSUE 1, June 1994. Default Value is 1400 milliSeconds
INT mtp3T17	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.12	INTEGER	read-write	T17 timer - Timing to restart of initial alignment GR-606-CORE, ISSUE 1, June 1994. Default Value is 1000 milliSeconds
INT mtp3T18	1.3.6.1.4.1.4618.1.2.2.1.4.1.3	INTEGER	read-write	T18 timer - Timer for links to become available. Not Applicable to ANSI. Default Value is 1400 milliSeconds
INT mtp3T19	1.3.6.1.4.1.4618.1.2.2.1.4.1.4	INTEGER	read-write	T19 timer - Timer to receive all traffic restart. Not Applicable to ANSI. Default Value is 0
INT mtp3T2	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.3	INTEGER	read-write	T2 timer - changeover ack timer GR-606-CORE, ISSUE 1, June 1994. Default Value is 700 milliSeconds
INT mtp3T20	1.3.6.1.4.1.4618.1.2.2.1.4.1.5	INTEGER	read-write	T20 timer - BroadCast traffic restart interval. Not Applicable to ANSI.
INT mtp3T21	1.3.6.1.4.1.4618.1.2.2.1.4.1.6	INTEGER	read-write	T21 timer - Interval to restart traffic route through adjacent SP
INT mtp3T22	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.13	INTEGER	read-write	T20 timer - Waiting to repeat local inhibit test. Default Value is 10000 milliSeconds
INT mtp3T23	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.14	INTEGER	read-write	T21 timer - Waiting to repeat remote inhibit test. Default Value is 10000 milliSeconds
INT mtp3T24	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.15	INTEGER	read-only	T24 timer - Stabilizing timer.
INT mtp3T26	1.3.6.1.4.1.4618.1.2.2.1.4.1.7	INTEGER	read-write	T26 timer - Timer at restarting SP waiting to repeat TRW GR-606-CORE, ISSUE 1, June 1994. Default Value is 13500 milliSeconds
INT mtp3T3	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.4	INTEGER	read-write	T3 timer - Transmission delay following changeback GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSeconds
INT mtp3T30	1.3.6.1.4.1.4618.1.2.2.1.4.1.8	INTEGER	read-only	T30 timer - Route Instance timer
INT mtp3T31	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.16	INTEGER	read-write	T31 timer - Timer to detect a link in false link congestion. GR-606-CORE, ISSUE 1, June 1994. Default Value is 30000 milliSeconds
INT mtp3T32	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.17	INTEGER	read-write	T32 timer - SLT timer
INT mtp3T33	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.18	INTEGER	read-write	T33 timer - Timer to detect a link in false link congestion. GR-606-CORE, ISSUE 1, June 1994. Default Value is 30000 milliSeconds
INT mtp3T34	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.19	INTEGER	read-write	T34 timer - Timer to detect a link in false link congestion. GR-606-CORE, ISSUE 1, June 1994. Default Value is 30000 milliSeconds
INT mtp3T35	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.20	INTEGER	read-write	T35 timer - periodic signalling link test timer GR-606-CORE, ISSUE 1, June 1994. Default Value is 30000 milliSeconds
INT mtp3T36	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.21	INTEGER	read-write	T36 timer - Probation timer for link oscillation. Not in bellcore. Default Value is 30000 milliSeconds
INT mtp3T37	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.22	INTEGER	read-write	T37 timer - Suspension Timer for link oscillation. Not in bellcore. Default Value is 30000 milliSeconds
INT mtp3T4	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.5	INTEGER	read-write	T4 timer - Changeback ack timer (first attempt) GR-606-CORE, ISSUE 1, June 1994. Default is 500 milliSeconds
INT mtp3T5	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.6	INTEGER	read-write	T5 timer - Changeback ack timer (subsequent attempt) GR-606-CORE, ISSUE 1, June 1994. Default is 500 milliSeconds
INT mtp3T6	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.7	INTEGER	read-write	T6 timer - Controlled rerouting transmission delay GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSeconds
INT mtp3T7	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.8	INTEGER	read-only	T7 Timer - Link connection ack timer
INT mtp3TBND	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.24	INTEGER	read-write	TBND timer - Bind confirm wait timer. Not in bellcore.
INT mtp3TFLC	1.3.6.1.4.1.4618.1.2.2.1.4.2.1.23	INTEGER	read-write	TFLC timer - Flow control request timer. Not in bellcore.
INT portIdEndA	1.3.6.1.4.1.4618.1.2.2.5.2.1.3	INTEGER	read-write	Port id of one end.
INT portIdEndB	1.3.6.1.4.1.4618.1.2.2.5.2.1.6	INTEGER	read-write	Port id of the other end.
processStatus	1.3.6.1.4.1.4618.1.2.6.4
processStatusInfo	1.3.6.1.4.1.4618.1.2.6.4.1
products	1.3.6.1.4.1.4618.1
STR routeAddr	1.3.6.1.4.1.4618.1.2.2.4.1.1.4	AddrString	read-write	Call Control routing number
ADD routeAddrType	1.3.6.1.4.1.4618.1.2.2.4.1.1.2	AddrType	read-write	Call Control routing type The possible option are: 1) Call party number 2) Transit Network Selection
OID routeAdrId	1.3.6.1.4.1.4618.1.2.2.4.1.1.3	AddrIdentifier	read-write	Call Control route request nature of address. The possible options are: 1) National number 2) International number 3) Unknown
routeEntry	1.3.6.1.4.1.4618.1.2.2.4.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
INT routeId	1.3.6.1.4.1.4618.1.2.2.4.1.1.1	INTEGER	read-write	Route Group id. Can be any integer 1-65535.
routeMgmntCmdGroup	1.3.6.1.4.1.4618.1.2.2.4.4
INT routeNumOfDigit	1.3.6.1.4.1.4618.1.2.2.4.1.1.6	INTEGER	read-write	Number of Digit in the route.
NUM routeNumPlan	1.3.6.1.4.1.4618.1.2.2.4.1.1.5	NumPlan	read-write	Call control route request numbering plan. The possible options are: 1) Number not present(nonumber) 2) ISDN numbering Plan(isdnnumplan) 3) Telephony numbering plan(telephonynumplan) 4) Private Numbering Plan(privatenumplan)
OPS routeOpStatus	1.3.6.1.4.1.4618.1.2.2.4.1.1.10	OpStatus	read-only	Current Status (Operational Status) of this Route. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
STR routeRouteName	1.3.6.1.4.1.4618.1.2.2.4.1.1.7	NameString	read-write	Route Name. Can be any combination of alphanumeric characters. Spaces are not allowed.
ROU routeRouteType	1.3.6.1.4.1.4618.1.2.2.4.1.1.8	RouteType	read-write	Route type: SS7/ISDN
ROW routeRowStatus	1.3.6.1.4.1.4618.1.2.2.4.1.1.9	RowStatus	read-write	Current Status (configurational Status) of this ROUTE. To Configure this Route, the only option is 'CREATEANDWAIT' To Delete this Route, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) notr
routeTable	1.3.6.1.4.1.4618.1.2.2.4.1		not-accessible	Route Table. Information about the Route(s) in MSSC are provided in this table. The index of this table is routeId (Integer)
rt	1.3.6.1.4.1.4618.1.2.2.4
OID rtAddrType	1.3.6.1.4.1.4618.1.2.2.4.4.1.1.2	AddrIdentifier	read-write	Call Control route request nature of address. The possible options are: 1) National number 2) International number 3) Unknown
STR rteName	1.3.6.1.4.1.4618.1.2.2.4.4.2.1.1	NameString	read-write	Route Name. Can be any combination of alphanumeric characters. Spaces are not allowed.
rtEntryIsdnCfgEntry	1.3.6.1.4.1.4618.1.2.2.4.2.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
rtEntryIsdnCfgTable	1.3.6.1.4.1.4618.1.2.2.4.2		not-accessible	RtEntry Isdn Table. Information about the RtEntry(s) in MSSC are provided in this table.The Table has two indices: rtEntryIsdnGrpId and rtEntryIsdntrunkId (both Integer).
INT rtEntryIsdnGrpId	1.3.6.1.4.1.4618.1.2.2.4.2.1.1	INTEGER	read-write	Route ISDN group id. Can be any integer 1-65535.
OPS rtEntryIsdnOpStatus	1.3.6.1.4.1.4618.1.2.2.4.2.1.5	OpStatus	read-only	Current Status (Operational Status) of this ISDN Route. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
STR rtEntryIsdnRouteName	1.3.6.1.4.1.4618.1.2.2.4.2.1.3	NameString	read-write	Route ISDN group name. Can be any combination of alphanumeric characters. Spaces are not allowed and cannot exceed 15 characters.
ROW rtEntryIsdnRowStatus	1.3.6.1.4.1.4618.1.2.2.4.2.1.4	RowStatus	read-write	Current Status (configurational Status) of this ISDN ROUTE Entry. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice
INT rtEntryIsdntrunkId	1.3.6.1.4.1.4618.1.2.2.4.2.1.2	INTEGER	read-write	Route ISDN Trunk id. Can be any integer 1-256.
rtEntrySs7CfgEntry	1.3.6.1.4.1.4618.1.2.2.4.3.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
rtEntrySs7CfgTable	1.3.6.1.4.1.4618.1.2.2.4.3		not-accessible	RtEntry SS7 Table. Information about the RtEntry(s) in MSSC are provided in this table.The Table has two indices: rtEntrySs7GrpId and rtEntrySs7CmbLinksetId (both Integer).
INT rtEntrySs7CmbLinksetId	1.3.6.1.4.1.4618.1.2.2.4.3.1.2	INTEGER	read-write	SS7 Linkset Id which is already configured so far. An incorrect Linkset Id will result a failure at the time of 'CREATION' of the RtEntry ie, addition of the Destination Point Code into the specified Route will fail.
INT rtEntrySs7Dpc	1.3.6.1.4.1.4618.1.2.2.4.3.1.4	INTEGER	read-write	Route SS7 Destination Point Code (The Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
INT rtEntrySs7GrpId	1.3.6.1.4.1.4618.1.2.2.4.3.1.1	INTEGER	read-write	Route SS7 group id. Can be any integer 1-65535.
STA rtEntrySs7Mode	1.3.6.1.4.1.4618.1.2.2.4.3.1.5	Standard	read-write	Route SS7 Type(ANSI/ITU)
OPS rtEntrySs7OpStatus	1.3.6.1.4.1.4618.1.2.2.4.3.1.7	OpStatus	read-only	Current Status (Operational Status) of this SS7 Route. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
STR rtEntrySs7RouteName	1.3.6.1.4.1.4618.1.2.2.4.3.1.3	NameString	read-write	Route SS7 group name. Can be any combination of alphanumeric characters Spaces are not allowed and cannot exceed 15 characters.
ROW rtEntrySs7RowStatus	1.3.6.1.4.1.4618.1.2.2.4.3.1.6	RowStatus	read-write	Current Status (configurational Status) of this SS7 Route Entry. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice
ENA rtMgmntCmd	1.3.6.1.4.1.4618.1.2.2.4.4.1.1.4	EnableOperation	read-write	Management Command for Enabling/Disabling Digit Strip for MSSC's Routing Feature. The possible options are : 1) Enable 2) Disable [default]
STR rtName	1.3.6.1.4.1.4618.1.2.2.4.4.1.1.1	NameString	read-only	Route Name. Can be any combination of alphanumeric characters. Spaces are not allowed.
INT rtNumOfDigit	1.3.6.1.4.1.4618.1.2.2.4.4.1.1.3	INTEGER	read-write	Number of Digit in the route.
services	1.3.6.1.4.1.4618.2
INT slotIdEndA	1.3.6.1.4.1.4618.1.2.2.5.2.1.2	INTEGER	read-write	Slot Id of one end.
INT slotIdEndB	1.3.6.1.4.1.4618.1.2.2.5.2.1.5	INTEGER	read-write	Slot Id of the other end.
ss7	1.3.6.1.4.1.4618.1.2.2.1
INT ss7AtmChnlId	1.3.6.1.4.1.4618.1.2.2.1.1.2.1.7	INTEGER	read-write	Channel Id.
ss7AtmLinkCfgEntry	1.3.6.1.4.1.4618.1.2.2.1.1.2.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
ss7AtmLinkCfgTable	1.3.6.1.4.1.4618.1.2.2.1.1.2		not-accessible	SS7 Atm Link Table. Information about the Atm Link(s) in MSSC are provided in this table. This table has two indices. The indices are ss7AtmVpi and ss7AtmVci (both Integer).
LIN ss7AtmLinkOpStatus	1.3.6.1.4.1.4618.1.2.2.1.1.2.1.11	LinkOpStatus	read-only	Current Status (Operational Status) of this SS7 Atm Link. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down 3) inhibit
ROW ss7AtmLinkRowStatus	1.3.6.1.4.1.4618.1.2.2.1.1.2.1.10	RowStatus	read-write	Current ATM Status (configurational Status) of this Link. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) not
INT ss7AtmLnkId	1.3.6.1.4.1.4618.1.2.2.1.1.2.1.3	INTEGER	read-write	Atmlink Id.
ATM ss7AtmPhyType	1.3.6.1.4.1.4618.1.2.2.1.1.2.1.9	AtmIfType	read-write	SS7 ATM Physical interface type. The value of this object could be 1) T1 (interface - t1) 2) E1 (interface - e1).
INT ss7AtmPortId	1.3.6.1.4.1.4618.1.2.2.1.1.2.1.6	INTEGER	read-write	Port Id.
INT ss7AtmSlotId	1.3.6.1.4.1.4618.1.2.2.1.1.2.1.5	INTEGER	read-write	Slot Id.
INT ss7AtmTrnkId	1.3.6.1.4.1.4618.1.2.2.1.1.2.1.8	INTEGER	read-write	Atm Trunk Id.
INT ss7AtmVci	1.3.6.1.4.1.4618.1.2.2.1.1.2.1.2	INTEGER	read-write	Atmlink Virtual Channel Identifier.
INT ss7AtmVpi	1.3.6.1.4.1.4618.1.2.2.1.1.2.1.1	INTEGER	read-write	Atmlink Virtual Path Identifier.
INT ss7AtmXconnectId	1.3.6.1.4.1.4618.1.2.2.1.1.2.1.4	INTEGER	read-write	Xconnect Id.
ss7BCktCfgEntry	1.3.6.1.4.1.4618.1.2.2.1.2.4.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
ss7BCktCfgTable	1.3.6.1.4.1.4618.1.2.2.1.2.4		not-accessible	SS7 B-Circuit Table. The Information about SS7 B-Circuit(s) in MSSC are provided in this table.This table has two indices: ss7BCktVpi and ss7BCktVci (both Integer).
INT ss7BCktCic	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.5	INTEGER	read-write	Circuit identifier code. Can be any integer from : 1) 1-16383 for ANSI 2) 1-4095 for ITU
DIR ss7BCktDir	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.6	Direction	read-write	Denotes Traffic direction. Possible Values are: 1) in 2) out 3) both
INT ss7BCktDpc	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.4	INTEGER	read-write	Broadband Circuit Destination Point Code (The Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
CKT ss7BCktOpStatus	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.17	CktOpStatus	read-only	Current Status (Operational Status) of this SS7 B-Circuit. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down 3) block
INT ss7BCktPriority	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.7	INTEGER	read-write	Traffic priority
CKT ss7BCktRowStatus	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.16	CktRowStatus	read-write	Current Status (configurational Status) of this SS7 B-Circuit. To Configure this circuit, the only option is 'CREATEANDWAIT'. To Modify any of the timers the only option is 'MODIFYTIMER' . To Delete this circuit, the only option is 'DESTROY'. For the
INT ss7BCktT12	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.9	INTEGER	read-write	T12 timer - blocking sent. Default Value is 40 milliSeconds
INT ss7BCktT13	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.10	INTEGER	read-write	T13 timer - initial blocking sent. Default Value is 600 milliSeconds
INT ss7BCktT14	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.11	INTEGER	read-write	T14 timer - unblocking sent. Default Value is 40 milliSeconds
INT ss7BCktT15	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.12	INTEGER	read-write	T15 timer - initial unblocking sent. Default Value is 600 milliSeconds
INT ss7BCktT16	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.13	INTEGER	read-write	T16 timer - reset sent. Default Value is 40 milliSeconds
INT ss7BCktT17	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.14	INTEGER	read-write	T17 timer - initial reset sent. Default Value is 600 milliSeconds
INT ss7BCktT3	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.8	INTEGER	read-write	T3 timer. Default Value is 0 milliSeconds
INT ss7BCktTrunkId	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.3	INTEGER	read-write	Trunk id.
INT ss7BCktTVal	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.15	INTEGER	read-write	TVal timer - initial reset sent. Default Value is 100 milliSeconds
INT ss7BCktVci	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.2	INTEGER	read-write	Broadband Virtual Channel Identifier. Can be any integer 1-65535.
INT ss7BCktVpi	1.3.6.1.4.1.4618.1.2.2.1.2.4.1.1	INTEGER	read-write	Broadband Virtual Path Indentifier. Can be any integer 1-65535.
ss7Br	1.3.6.1.4.1.4618.1.2.2.1.2
CIR ss7CICMgmntCmd	1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.5	CircuitControlStatus	read-write	Management Command for Blocking/Unblocking any call setup on the specified channel. The option of repnum is provided to allow consecutive CIC to be blocked/unblocked The possible options are : 1) Block 2) UnBlock [default]
ss7CICMgmntEntry	1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
ss7CICMgmntTable	1.3.6.1.4.1.4618.1.2.2.1.2.5.2		not-accessible	SS7 Circuit CIC Management Table. The Management Commands for SS7 Circuits(s) in MSSC are provided in this table. This table has two indices: ss7CktMgmtDPC and ss7CktMgmtCIC (both Integer).
INT ss7CicRange	1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.4	INTEGER	read-write	Range for this operation. This option will allow consecutive CIC to be reset
ss7CICTimerTable	1.3.6.1.4.1.4618.1.2.2.1.2.3		not-accessible	SS7 Circuit CIC Timer Table. The Information about SS7 Circuit(s) Timers in MSSC are provided in this table.User can Modify any Timer(s) in this table. This table has two indices: ss7CktTmrDpc and ss7CktTmrCic (both Integer).
ss7CicTmrEntry	1.3.6.1.4.1.4618.1.2.2.1.2.3.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
ss7CktCfgEntry	1.3.6.1.4.1.4618.1.2.2.1.2.2.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
ss7CktCfgTable	1.3.6.1.4.1.4618.1.2.2.1.2.2		not-accessible	SS7 Circuit Table. The Information about SS7 Circuit(s) in MSSC are provided in this table. This table has two indices: ss7CktTrunkId and ss7CktChnlId (both Integer).
INT ss7CktChnlId	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.2	INTEGER	read-write	User Assigned Channel id
INT ss7CktCic	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.5	INTEGER	read-write	Circuit identifier code. Can be any integer from 1) 1-4095 for ITU 2) 1-16383 for ANSI
DIR ss7CktDir	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.6	Direction	read-write	Traffic direction: Possible options are : 1) IN 2) OUT 3) BOTH
INT ss7CktDpc	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.4	INTEGER	read-write	Destination Point Code (The Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
INT ss7CktId	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.3	INTEGER	read-only	Circuit id. The Id assingned to each of the circuits for a particular Trunk.
INT ss7CktMgmntChnlId	1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1.2	INTEGER	read-only	Channel id
BLO ss7CktMgmntCmd	1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1.4	BlockOperation	read-write	Management Command for Blocking/Unblocking any call setup on the specified channel. The option of repnum is provided to allow consecutive CIC to be blocked/unblocked The possible options are : 1) Block 2) UnBlock 3) Noaction [default]
ss7CktMgmntEntry	1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
ss7CktMgmntGroup	1.3.6.1.4.1.4618.1.2.2.1.2.5
INT ss7CktMgmntRepNum	1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1.3	INTEGER	read-write	Repeat Number for this operation. This option will allow consecutive CIC to be reset
ss7CktMgmntTable	1.3.6.1.4.1.4618.1.2.2.1.2.5.1		not-accessible	SS7 Circuit Management Table. The Management Commands for SS7 Circuits(s) in MSSC are provided in this table. This table has two indices: ss7CktMgmntTrnkId and ss7CktMgmntChnlId (both Integer).
INT ss7CktMgmntTrnkId	1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1.1	INTEGER	read-only	Trunk id.
INT ss7CktMgmtCIC	1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.2	INTEGER	read-only	Circuit identifier code. Can be any integer from 1) 1-4095 for ITU 2) 1-16383 for ANSI
INT ss7CktMgmtDPC	1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.1	INTEGER	read-only	Destination Point Code (The Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
CKT ss7CktOpStatus	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.17	CktOpStatus	read-only	Current Status (Operational Status) of this SS7 Circuit. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down 3) block
INT ss7CktPriority	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.7	INTEGER	read-write	Traffic priority
INT ss7CktRepNum	1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.3	INTEGER	read-write	Repeat Number for this operation. This option will allow consecutive CIC to be reset
CKT ss7CktRowStatus	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.16	CktRowStatus	read-write	Current Status (configurational Status) of this SS7 Circuit. To Configure this circuit, the only option is 'CREATEANDWAIT'. To Delete this circuit, the only option is 'DESTROY'. To Modify any of the Circuit Timers, the only option is 'MODIFYTIMER'. Fo
INT ss7CktT12	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.9	INTEGER	read-write	T12 timer - blocking sent. Default Value is 40 milliSeconds
INT ss7CktT13	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.10	INTEGER	read-write	T13 timer - initial blocking sent. Default Value is 600 milliSeconds
INT ss7CktT14	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.11	INTEGER	read-write	T14 timer - unblocking sent. Default Value is 40 milliSeconds
INT ss7CktT15	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.12	INTEGER	read-write	T15 timer - initial unblocking sent. Default Value is 600 milliSeconds
INT ss7CktT16	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.13	INTEGER	read-write	T16 timer - reset sent. Default Value is 40 milliSeconds
INT ss7CktT17	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.14	INTEGER	read-write	T17 timer - initial reset sent. Default Value is 600 milliSeconds
INT ss7CktT3	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.8	INTEGER	read-write	T3 timer. Default Value is 0 milliSeconds
INT ss7CktTmrCic	1.3.6.1.4.1.4618.1.2.2.1.2.3.1.2	INTEGER	read-write	Circuit identifier code. Can be any integer 1-65535.
INT ss7CktTmrDpc	1.3.6.1.4.1.4618.1.2.2.1.2.3.1.1	INTEGER	read-write	Destination Point Code (The Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
MOD ss7CktTmrRowStatus	1.3.6.1.4.1.4618.1.2.2.1.2.3.1.11	ModifyTmrStatus	read-write	This is a command to MODIFY a Timer. A 'GET' operation on this object will display the default value [no action]. The possible option for 'SET' operation is: 1)modify
INT ss7CktTmrT12	1.3.6.1.4.1.4618.1.2.2.1.2.3.1.4	INTEGER	read-write	T12 timer - blocking sent. Default Value is 40 milliSeconds
INT ss7CktTmrT13	1.3.6.1.4.1.4618.1.2.2.1.2.3.1.5	INTEGER	read-write	T13 timer - initial blocking sent. Default Value is 600 milliSeconds
INT ss7CktTmrT14	1.3.6.1.4.1.4618.1.2.2.1.2.3.1.6	INTEGER	read-write	T14 timer - unblocking sent. Default Value is 40 milliSeconds
INT ss7CktTmrT15	1.3.6.1.4.1.4618.1.2.2.1.2.3.1.7	INTEGER	read-write	T15 timer - initial unblocking sent. Default Value is 600 milliSeconds
INT ss7CktTmrT16	1.3.6.1.4.1.4618.1.2.2.1.2.3.1.8	INTEGER	read-write	T16 timer - reset sent. Default Value is 40 milliSeconds
INT ss7CktTmrT17	1.3.6.1.4.1.4618.1.2.2.1.2.3.1.9	INTEGER	read-write	T17 timer - initial reset sent. Default Value is 600 milliSeconds
INT ss7CktTmrT3	1.3.6.1.4.1.4618.1.2.2.1.2.3.1.3	INTEGER	read-write	T3 timer. Default Value is 0 milliSeconds
INT ss7CktTmrTVal	1.3.6.1.4.1.4618.1.2.2.1.2.3.1.10	INTEGER	read-write	TVal timer - initial reset sent. Default Value is 100 milliSeconds
INT ss7CktTrunkId	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.1	INTEGER	read-write	User Assigned Trunk id.
INT ss7CktTVal	1.3.6.1.4.1.4618.1.2.2.1.2.2.1.15	INTEGER	read-write	TVal timer - initial reset sent. Default Value is 100 milliSeconds
NTF ss7CktValidationNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.122			Validation of Circuits
NTF ss7ConcernedDpcPauseNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.62			Info : Concerned DPC pause
NTF ss7ConcernedDpcRemUnAvailNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.64			Info : Concerned DPC remote user unavailable
NTF ss7ConcernedDpcResumeNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.63			Info : Concerned DPC resume
NTF ss7InvalidSLCNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.61			Info : Mtp3 invalid SLC configured.
NTF ss7IsupCicLocNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.73			Info : ISUP Circuits are blocked/unblocked locally
NTF ss7IsupCicRemNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.74			Info : ISUP Circuits are blocked/unblocked remotely
NTF ss7IsupCongLvl1Notify	1.3.6.1.4.1.4618.1.2.7.2.1.0.75			Info : Route to DPC is encountering Level 1 Congestion
NTF ss7IsupCongLvl2Notify	1.3.6.1.4.1.4618.1.2.7.2.1.0.76			Info : Route to DPC is encountering Level 2 Congestion
ss7LinkCfgEntry	1.3.6.1.4.1.4618.1.2.2.1.1.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
ss7LinkCfgTable	1.3.6.1.4.1.4618.1.2.2.1.1.1		not-accessible	SS7 Link Table. Information about the SS7 Link(s) in MSSC are provided in this table. The index of this table is ss7LinkName (String)
INT ss7LinkChannel	1.3.6.1.4.1.4618.1.2.2.1.1.1.1.4	INTEGER	read-write	User assigned channel.
NTF ss7LinkDnNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.56			Info : switch has a failure on ss7 mtp3 link
NTF ss7LinkEnterCongestionNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.59			Info : the specified link has entered a congestion situation
NTF ss7LinkExitCongestionNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.60			Info : the ss7 link has exited the congestion situation
INT ss7LinkId	1.3.6.1.4.1.4618.1.2.2.1.1.1.1.2	INTEGER	read-write	User assigned Link id. Can be any integer 1-65535.
NTF ss7LinkLocInhNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.67			Info : Link Inhibited Locally
NTF ss7LinkLocUnInhNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.68			Info : Link UnInhibited Locally
NTF ss7LinkLOPBlkNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.69			Info : Local Processor Recovered causing link unblocked
NTF ss7LinkLPRNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.70			Info : Local Processor Recovered causing link unblocked
ss7LinkMgmntEntry	1.3.6.1.4.1.4618.1.2.2.1.1.5.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
ss7LinkMgmntTable	1.3.6.1.4.1.4618.1.2.2.1.1.5		not-accessible	SS7 Link Management Table. The Management Commands for Link(s) in MSSC are provided in this table. This table has the index linkName (String).
STA ss7LinkMode	1.3.6.1.4.1.4618.1.2.2.1.1.1.1.7	Standard	read-write	Link Mode(ANSI/ITU)
STR ss7LinkName	1.3.6.1.4.1.4618.1.2.2.1.1.1.1.1	NameString	read-write	Link name. Can be any combination of alphanumeric characters. Spaces are not allowed and cannot exceed 15 characters.
LIN ss7LinkOpStatus	1.3.6.1.4.1.4618.1.2.2.1.1.1.1.9	LinkOpStatus	read-only	Current Status (Operational Status) of this SS7 Link. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down 3) inhibit
NTF ss7LinkRemInhNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.65			Info : Link Inhibited Remotely
NTF ss7LinkRemUnInhNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.66			Info : Link UnInhibited Remotely
ROW ss7LinkRowStatus	1.3.6.1.4.1.4618.1.2.2.1.1.1.1.8	RowStatus	read-write	Current Status (configurational Status) of this Link. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) notread
NTF ss7LinkRPONotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.71			Info :LSSU/SIPO Received
NTF ss7LinkRPRNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.72			Info :LSSU/SIPO stopped and FISU/MSU recived
INT ss7LinksetAdjDpc	1.3.6.1.4.1.4618.1.2.2.1.1.3.1.4	INTEGER	read-write	Adjacent Point Code for this Linkset (the Integer value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
ss7LinksetCfgEntry	1.3.6.1.4.1.4618.1.2.2.1.1.3.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
ss7LinksetCfgTable	1.3.6.1.4.1.4618.1.2.2.1.1.3		not-accessible	SS7 Linkset Table. Information about the Linkset(s) in MSSC are provided in this table. This table has the index ss7LinksetLinkId (Integer).
INT ss7LinksetId	1.3.6.1.4.1.4618.1.2.2.1.1.3.1.2	INTEGER	read-write	Linkset id. Can be any integer 1-128.
INT ss7LinksetLinkId	1.3.6.1.4.1.4618.1.2.2.1.1.3.1.1	INTEGER	read-write	Link id. Can be any integer 1-65535.
ss7LinksetMgmtEntry	1.3.6.1.4.1.4618.1.2.2.1.1.4.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
ss7LinksetMgmtTable	1.3.6.1.4.1.4618.1.2.2.1.1.4		not-accessible	SS7 Linkset Management Table. The Management Commands for Linkset in MSSC are provided in this table. This table has the index linksetId (Integer).
STA ss7LinksetMode	1.3.6.1.4.1.4618.1.2.2.1.1.3.1.5	Standard	read-write	Linkset Type(ANSI/ITU)
STR ss7LinksetName	1.3.6.1.4.1.4618.1.2.2.1.1.3.1.3	NameString	read-write	Linkset name. Can be any combination of alphanumeric characters. Spaces are not allowed and cannot exceed 15 characters.
LIN ss7LinksetOpStatus	1.3.6.1.4.1.4618.1.2.2.1.1.3.1.7	LinkSetOpStatus	read-only	Current Status (Operational Status) of this Link Set. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) deactive
ROW ss7LinksetRowStatus	1.3.6.1.4.1.4618.1.2.2.1.1.3.1.6	RowStatus	read-write	Current Status (configurational Status) of this Link. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) notread
INT ss7LinkSlc	1.3.6.1.4.1.4618.1.2.2.1.1.1.1.5	INTEGER	read-write	Link Selection Code. Can be any integer 0-15.
LIN ss7LinkSpeed	1.3.6.1.4.1.4618.1.2.2.1.1.1.1.6	LinkType	read-only	SS7 Link Speed: Possible Values are: 56k or 64k. Default Value is 64K
INT ss7LinkTrunkId	1.3.6.1.4.1.4618.1.2.2.1.1.1.1.3	INTEGER	read-write	User assigned Trunk id.
NTF ss7LinkUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.55			Info : switch has successfully brought up ss7 mtp3 link
ENA ss7LnkEnable	1.3.6.1.4.1.4618.1.2.6.3.1.1.1.3	EnableTrace	read-write	This option enables/disables the trace Function for the specified SS7 Link. The possible option are: 1) Enable 2) Disable [default]
INT ss7LnkId	1.3.6.1.4.1.4618.1.2.6.3.1.1.1.1	INTEGER	read-only	The SS7 link Id on which the Trace Function is to be applied.
LOG ss7LnkLog	1.3.6.1.4.1.4618.1.2.6.3.1.1.1.2	LogType	read-only	This option displays weather log Function is enabled for the specified SS7 Link.
ss7LnkTrace	1.3.6.1.4.1.4618.1.2.6.3.1
ss7LnkTraceEntry	1.3.6.1.4.1.4618.1.2.6.3.1.1.1		not-accessible
ss7LnkTraceTable	1.3.6.1.4.1.4618.1.2.6.3.1.1		not-accessible	This Table is specified for Applying Trace Function for any SS7 Link(s). The index of this table is ss7LnkId (integer)
NTF ss7Mtp2LinkDnNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.58			Info : switch has a failure on ss7 mtp2 link
NTF ss7Mtp2LinkUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.57			Info : switch has successfully brought up ss7 mtp2 link
ss7Route	1.3.6.1.4.1.4618.1.2.2.1.6
INT ss7RouteDpc	1.3.6.1.4.1.4618.1.2.6.3.2.1.1.1	INTEGER	read-only	The SS7 Point code. The trace Function is to be applied on this route.
ENA ss7RouteEnable	1.3.6.1.4.1.4618.1.2.6.3.2.1.1.3	EnableTrace	read-write	This option enables/disables the trace Functions for the specified SS7 Route. The possible option are: 1) Enable 2) Disable [default]
LOG ss7RouteLog	1.3.6.1.4.1.4618.1.2.6.3.2.1.1.2	LogType	read-only	This option displays weather Log Function is enabled for the specified SS7 Route.
ss7RouteTrace	1.3.6.1.4.1.4618.1.2.6.3.2
ss7RouteTraceEntry	1.3.6.1.4.1.4618.1.2.6.3.2.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
ss7RouteTraceTable	1.3.6.1.4.1.4618.1.2.6.3.2.1		not-accessible	This Table is specified for Applying Trace Function for any SS7 Route(s). The index of this table is ss7RouteDpc (Integer)
INT ss7RtCmbLinksetId	1.3.6.1.4.1.4618.1.2.2.1.6.1.1.2	INTEGER	read-write	SS7 Linkset Id which is already configured so far. An incorrect Linkset Id will result a failure at the time of 'CREATION' of the Route table for the specified DPC.
INT ss7RtDPC	1.3.6.1.4.1.4618.1.2.2.1.6.1.1.1	INTEGER	read-write	The Route Destination Point Code (The Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
ss7RtDpcEntry	1.3.6.1.4.1.4618.1.2.2.1.6.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
ss7RtDpcTable	1.3.6.1.4.1.4618.1.2.2.1.6.1		not-accessible	SS7 Route Dpc Table. The Information about Route(s) in MSSC are provided in this table. This table has one index: ss7RtDPC (Integer).
STA ss7RtLoadShareType	1.3.6.1.4.1.4618.1.2.2.1.6.1.1.3	Standard	read-write	Load Share type(ANSI/ITU)
OPS ss7RtOpStatus	1.3.6.1.4.1.4618.1.2.2.1.6.1.1.5	OpStatus	read-only	Current Status (Operational Status) of this SS7 Route. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
ROW ss7RtRowStatus	1.3.6.1.4.1.4618.1.2.2.1.6.1.1.4	RowStatus	read-write	Current Status (configurational Status) of this SS7 Route. To Configure this Route, the only option is 'CREATEANDWAIT'. To Delete this Route, the only option is 'DESTROY'. For the 'GET' Operation, the possible options are 1) active 2) notinservice 3
ss7Sig	1.3.6.1.4.1.4618.1.2.2.1.1
ss7TrunkCfgEntry	1.3.6.1.4.1.4618.1.2.2.1.2.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
ss7TrunkCfgTable	1.3.6.1.4.1.4618.1.2.2.1.2.1		not-accessible	ISDN Trunk Table. The Information about ISDN Trunk(s) in MSSC are provided in this table. This table has the index ss7TrunkId (Integer).
INT ss7TrunkDpc	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.8	INTEGER	read-write	Destination point code ( the Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
DS1 ss7TrunkDS1LBO	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.17	DS1LBO	read-write	DS1 Line Build Out, possible options are 1) upTo133Feet(1) 2) upTo266Feet(2) 3) upTo399Feet(3) 4) upTo533Feet(4) 5) upTo655Feet(5) 6) negative7_5Db(6) 7) negative15Db(7) 8) negative22_5Db(8)
DS1 ss7TrunkDS1LineCoding	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.15	DS1LineCoding	read-write	DS1 Line Coding, possible options are 1) b8zs(1) 2) ami(2)
DS1 ss7TrunkDS1LineType	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.14	DS1LineType	read-write	DS1 Line Type possible options are 1) esF(1) 2) d4(2)
TRA ss7TrunkDS1TransClkSrc	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.16	TransClkSrc	read-write	DS1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
DS3 ss7TrunkDS3ATMCellMap	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.26	DS3ATMCellMap	read-write	DS3-ATM Cell Mapping, possible options are 1) plcp(1) 2) directMapping(2)
DS3 ss7TrunkDS3ATMLBO	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.28	DS3LBO	read-write	DS3-ATM Line Build Out possible options are 1) short(1) 2) long(2)
DS3 ss7TrunkDS3ATMLineType	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.25	DS3LineType	read-write	DS3-ATM Line Type possible options are 1) cbitParity(1) 2) clearChannel(2)
TRA ss7TrunkDS3ATMTransClkSrc	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.27	TransClkSrc	read-write	DS3-ATM transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
DS1 ss7TrunkDS3DS1LineType	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.21	DS1LineType	read-write	DS3DS1 Line Type possible options are 1) esF(1) 2) d4(2)
TRA ss7TrunkDS3DS1TransClkSrc	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.22	TransClkSrc	read-write	DS3DS1ansmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
DS3 ss7TrunkDS3LBO	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.20	DS3LBO	read-write	DS3 Line Build Out possible options are 1) short(1) 2) long(2)
DS3 ss7TrunkDS3LineType	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.18	DS3LineType	read-write	DS3 Line Type possible options are 1) cbitParity(1) 2) clearChannel(2)
TRA ss7TrunkDS3TransClkSrc	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.19	TransClkSrc	read-write	DS3 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
E1C ss7TrunkE1CRC4	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.12	E1CRC4	read-write	E1 Cyclic Redundancy Code, possible options are 1) enabled(1) 2) disable(2)
E1M ss7TrunkE1MultiFrame	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.11	E1MultiFrame	read-write	E1 multiFrame Type possible options are 1) CAS(1) 2) CCS(2)
TRA ss7TrunkE1TransClk	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.13	TransClkSrc	read-write	E1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
INT ss7TrunkGrpId	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.3	INTEGER	read-write	Id of the trunk group to which the trunk belongs. Can be any integer 1-65535.
INT ss7TrunkId	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.1	INTEGER	read-write	Id for the trunk. Can be any integer 1-65535.
STA ss7TrunkMode	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.10	Standard	read-write	Trunk mode - ANSI/ITU
STR ss7TrunkName	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.2	NameString	read-write	Name for the trunk. Can be any combination of alphanumeric characters. Spaces are not allowed and cannot exceed 15 characters.
TRA ss7TrunkOC3TransClkSrc	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.23	TransClkSrc	read-write	OC3 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
INT ss7TrunkOpc	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.7	INTEGER	read-write	Originating point code (the Integer value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
OPS ss7TrunkOpStatus	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.30	OpStatus	read-only	Current Status (Operational Status) of this SS7 Trunk. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
IFT ss7TrunkPhyType	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.9	IfType	read-write	Physical Interface Type possible options are 1) T1 (interface-t1) 2) T3 (interface-t3) 3) Unchannelized T3 (interface-ut3) 4) OC3 (interface-oc3) 5) Unchannelized T3 with compression (interface-ut3cp) 6) OC3 with compression (interface-oc3cp) 7) E
INT ss7TrunkPortId	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.6	INTEGER	read-write	Port id
ROW ss7TrunkRowStatus	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.29	RowStatus	read-write	Current Status (configurational Status) of this SS7 Trunk. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) no
INT ss7TrunkSlotId	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.5	INTEGER	read-write	Slot id
TRA ss7TrunkUNCHE3TransClkSrc	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.24	TransClkSrc	read-write	UNCHANNELIZED E3 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
INT ss7TrunkXconnectId	1.3.6.1.4.1.4618.1.2.2.1.2.1.1.4	INTEGER	read-write	Xconnect id
PRO statusICC1ProcId	1.3.6.1.4.1.4618.1.2.6.4.1.3	ProcessStatus	read-only	Indicates the current status of FT_ICC : Process Id 480.
PRO statusICC2ProcId	1.3.6.1.4.1.4618.1.2.6.4.1.4	ProcessStatus	read-only	Indicates the current status of FT_ICC: Process Id 496.
PRO statusISDN1ProcId	1.3.6.1.4.1.4618.1.2.6.4.1.5	ProcessStatus	read-only	Indicates the current status of FT_ISDN: Process Id 476.
PRO statusISDN2ProcId	1.3.6.1.4.1.4618.1.2.6.4.1.6	ProcessStatus	read-only	Indicates the current status of FT_ISDN: Process Id 472.
PRO statusLM1ProcId	1.3.6.1.4.1.4618.1.2.6.4.1.1	ProcessStatus	read-only	Indicates the current status of FT_LM: Process Id 512.
PRO statusLM2ProcID	1.3.6.1.4.1.4618.1.2.6.4.1.2	ProcessStatus	read-only	Indicates the current status of FT_LM: Process Id 511.
PRO statusMTP21ProcId	1.3.6.1.4.1.4618.1.2.6.4.1.11	ProcessStatus	read-only	Indicates the current status of Mtp2: Process Id 320.
PRO statusMTP22ProcId	1.3.6.1.4.1.4618.1.2.6.4.1.12	ProcessStatus	read-only	Indicates the current status of Mtp2: Process Id 321.
PRO statusMTP23ProcId	1.3.6.1.4.1.4618.1.2.6.4.1.13	ProcessStatus	read-only	Indicates the current status of Mtp2 : Process Id 322.
PRO statusMTP24ProcId	1.3.6.1.4.1.4618.1.2.6.4.1.14	ProcessStatus	read-only	Indicates the current status of Mtp2: Process Id 323.
PRO statusSIG1ProcId	1.3.6.1.4.1.4618.1.2.6.4.1.9	ProcessStatus	read-only	Indicates the current status of FT_SIG: Process Id 384.
PRO statusSIG2ProcId	1.3.6.1.4.1.4618.1.2.6.4.1.10	ProcessStatus	read-only	Indicates the current status of FT_SIG: Process Id 400.
PRO statusSPHR1ProcId	1.3.6.1.4.1.4618.1.2.6.4.1.7	ProcessStatus	read-only	Indicates the current status of FT_SPHR: Process Id 448.
PRO statusSPHR2ProcId	1.3.6.1.4.1.4618.1.2.6.4.1.8	ProcessStatus	read-only	Indicates the current status of FT_SPHR: Process Id 464.
switchActiveAlarmEntry	1.3.6.1.4.1.4618.1.2.7.2.2.1		not-accessible
switchActiveAlarmTable	1.3.6.1.4.1.4618.1.2.7.2.2		not-accessible
ACT switchAlarmAck	1.3.6.1.4.1.4618.1.2.7.2.2.1.10	ActiveAlarmAckStatus	read-write	This field is to acknowelge the alarms manually
STR switchAlarmDesc	1.3.6.1.4.1.4618.1.2.7.2.2.1.9	DisplayString	read-only	This description related to Generated alarm
INT switchAlarmId	1.3.6.1.4.1.4618.1.2.7.2.2.1.7	INTEGER	read-only	This specifies the alarm that was sent
INT switchAlarmInstNo	1.3.6.1.4.1.4618.1.2.7.2.2.1.2	INTEGER	read-only	Instance number related to alarm. Can be any integer from 1-65535.
ALA switchAlarmMainEvent	1.3.6.1.4.1.4618.1.2.7.2.2.1.5	AlarmEvent	read-only	This specifies the main event event group of alarm
INT switchAlarmMsgId	1.3.6.1.4.1.4618.1.2.7.2.2.1.1	INTEGER	read-only	Alarm Message Id. Can be any integer from 1-65535.
INT switchAlarmRepeatTime	1.3.6.1.4.1.4618.1.2.7.2.2.1.11	INTEGER	read-write	Alarm Repeat Time in minutes: After the set time all alarms in the active alarm table will be displayed to the user again
ALA switchAlarmSeverity	1.3.6.1.4.1.4618.1.2.7.2.2.1.8	AlarmSeverity	read-only	This field defines the severity of alarms of alarm. Alarms can od : Major,Minor,Critical and Informational
ALA switchAlarmSubEvent	1.3.6.1.4.1.4618.1.2.7.2.2.1.6	AlarmSubEvent	read-only	This specifies the main event event group of alarm
STR switchAlarmTime	1.3.6.1.4.1.4618.1.2.7.2.2.1.3	DisplayString	read-only	Date and time when the alarma was generated
EVE switchAlarmType	1.3.6.1.4.1.4618.1.2.7.2.2.1.4	EventType	read-only	This specifies the event group is alarm. Default :ALARM
switchCdr	1.3.6.1.4.1.4618.1.2.4
switchConfig	1.3.6.1.4.1.4618.1.2.2
STR switchContact	1.3.6.1.4.1.4618.1.2.1.1.4	DisplayString	read-write	Contact information about the Switch. Can be any combination of alphanumeric characters. Spaces are allowed and cannot exceed 24 characters.
STR switchDescr	1.3.6.1.4.1.4618.1.2.1.1.2	DisplayString	read-write	Description of the Switch. Can be any combination of alphanumeric characters. Spaces are allowed and cannot exceed 255 characters.
switchDSP	1.3.6.1.4.1.4618.1.2.5.3
DSP switchDSPCardType	1.3.6.1.4.1.4618.1.2.5.3.1.1.3	DSPCardType	read-write	The card Type. The possible options are : 1) DSP2B 2) DSP2C
switchDSPCfgEntry	1.3.6.1.4.1.4618.1.2.5.3.1.1		not-accessible	DSP Configuration Table. This Table provides information about the DSP card(s) in MSSC. This table has two indices: switchDSPXconnId and switchDSPSlotId (both Integer)
OPS switchDSPCfgOpStatus	1.3.6.1.4.1.4618.1.2.5.3.1.1.5	OpStatus	read-only	Current Status (Operational Status) of this Switch DSP. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
ROW switchDSPCfgRowStatus	1.3.6.1.4.1.4618.1.2.5.3.1.1.4	RowStatus	read-write	Current Status (configurational Status) of this Switch DSP. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) n
switchDSPCfgTable	1.3.6.1.4.1.4618.1.2.5.3.1		not-accessible
INT switchDSPSlotId	1.3.6.1.4.1.4618.1.2.5.3.1.1.2	INTEGER	read-write	The Slot id at which the DSP card is being configured.
INT switchDSPXconnId	1.3.6.1.4.1.4618.1.2.5.3.1.1.1	INTEGER	read-write	Xconnect Id for which DSP card is being configured
switchFeature	1.3.6.1.4.1.4618.1.2.5
switchFeatureTGCfgTable	1.3.6.1.4.1.4618.1.2.5.4.1		not-accessible	Trunk Group Feature Table. This Table provides information about the Trunk Group Feature(s) in MSSC. This table has one indices: switchFeatureTGId (Integer)
TGF switchFeatureTGFeatureCNIS	1.3.6.1.4.1.4618.1.2.5.4.1.1.7	TGFeature	read-write	Denotes Caller Number Identitication Service (CNIS) feature. Possible Values are: 1. Enable 2. Disable NOTE: If TrunkGrpType is SS7, then Enabling Caller Number Identitication Service, is an INVALID Operation. A 'GET' Operation at this object will AL
TGF switchFeatureTGFeatureCOMPRESS	1.3.6.1.4.1.4618.1.2.5.4.1.1.5	TGFeature	read-write	Denotes Compression feature. Possible Values are: 1. Enable 2. Disable NOTE: if TrunkGrpType is ISDN, then Enabling Compression feature, is an INVALID Operation. A 'GET' Operation at this object will ALWAYS result in the default value [disable] bein
TGF switchFeatureTGFeatureEC	1.3.6.1.4.1.4618.1.2.5.4.1.1.4	TGFeature	read-write	Denotes Echo Cancellation feature. Possible Values are: 1. Enable 2. Disable NOTE: If TrunkGrpType is ISDN, then Enabling Echo Cancellation feature is an INVALID Operation. A 'GET' Operation at this object will ALWAYS result in the default value [di
TGF switchFeatureTGFeatureSS	1.3.6.1.4.1.4618.1.2.5.4.1.1.6	TGFeature	read-write	Denotes Silent Supression feature. Possible Values are: 1. Enable 2. Disable NOTE: If TrunkGrpType is ISDN, the Enabling Silent Supression feature, is an INVALID Operation. A 'GET' Operation at this object will ALWAYS result in the default value [di
INT switchFeatureTGId	1.3.6.1.4.1.4618.1.2.5.4.1.1.1	INTEGER	read-only	Denotes Id for this trunk group.
STR switchFeatureTGName	1.3.6.1.4.1.4618.1.2.5.4.1.1.2	NameString	read-only	Denotes Name of this trunk group. The Name is a string of length 8. The first two characters of Name have to be an alphabhet. The next 6 characters are numeric. An example of a valid Trunk Group Name is ab123456. NOTE: This format needs to strictly fo
TRN switchFeatureTGType	1.3.6.1.4.1.4618.1.2.5.4.1.1.3	TrnkGrpType	read-only	Denotes Trunk group type. Possible values for Trunk group are: 1. ss7 2. isdn
switchGenInfoGrp	1.3.6.1.4.1.4618.1.2.1.1
switchInfo	1.3.6.1.4.1.4618.1.2.1
IP switchIPAddr	1.3.6.1.4.1.4618.1.2.1.1.5	IpAddress	read-only	Switch IP address. In xxx.xxx.xxx.xxx format.
STR switchLocation	1.3.6.1.4.1.4618.1.2.1.1.3	DisplayString	read-write	Location of the Switch. Can be any combination of alphanumeric characters. Spaces are allowed and cannot exceed 255 characters.
switchMaintenance	1.3.6.1.4.1.4618.1.2.6
switchMeas	1.3.6.1.4.1.4618.1.2.3
STR switchName	1.3.6.1.4.1.4618.1.2.1.1.1	NameString	read-write	The switch Name. Can be any combination of alphanumeric characters. Spaces are not allowed and cannot exceed 24 characters
ROW switchNameStatus	1.3.6.1.4.1.4618.1.2.1.1.11	RowStatus	read-write	Current Status (configurational Status) of this Switch Name. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the GET Operation, the possible options are 1) active 2) notinservice 3) no
FTS switchOver	1.3.6.1.4.1.4618.1.2.6.1.1.1	FTswitchOver	read-write	FT Switch Over command. The possible options are 1) FT_SIG 2) FT_ICC 3) FT_ISDN 4) FT_SPHR 5) FT_LM Select any one and set that option.
INT switchPc	1.3.6.1.4.1.4618.1.2.1.2.1.1.1	INTEGER	read-write	Point Code for the switch (the Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
switchPcEntry	1.3.6.1.4.1.4618.1.2.1.2.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
switchPcInfo	1.3.6.1.4.1.4618.1.2.1.2
switchPcInfoTable	1.3.6.1.4.1.4618.1.2.1.2.1		not-accessible	Switch Point code Information Table.The index of this table is switchPc (Integer).
STA switchPcMode	1.3.6.1.4.1.4618.1.2.1.2.1.1.2	Standard	read-write	Point Code type (ANSI/ITU)
ROW switchPcStatus	1.3.6.1.4.1.4618.1.2.1.2.1.1.3	RowStatus	read-write	Current Status (configurational Status) of this Switch Point Code. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservic
switchTGFeature	1.3.6.1.4.1.4618.1.2.5.4
switchTGGrpCfgEntry	1.3.6.1.4.1.4618.1.2.5.4.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
switchTrap	1.3.6.1.4.1.4618.1.2.7
SWI switchType	1.3.6.1.4.1.4618.1.2.1.1.10	SwitchType	read-only	The Switch Type : (National/International)
TIK switchUpTime	1.3.6.1.4.1.4618.1.2.1.1.6	TimeTicks	read-only	The Time (in Seconds) since last restart of the Switch
switchUserCfgEntry	1.3.6.1.4.1.4618.1.2.1.3.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level. CURRENTLY NOT APPLICABLE
switchUserCfgTable	1.3.6.1.4.1.4618.1.2.1.3.1		not-accessible	This Table is to maintain the User information and providing Validation Checks for Authorised users for Configuration.The index of this table is switchUserId (Integer). CURRENTLY NOT APPLICABLE
INT switchUserId	1.3.6.1.4.1.4618.1.2.1.3.1.1.1	INTEGER	read-write	The Id of the Switch User. The user can only 'SET' User Id. If user tries to 'GET' the user Id, incorrect value would be displayed. This Feature is CURRENTLY NOT APPLICABLE
STR switchUserName	1.3.6.1.4.1.4618.1.2.1.3.1.1.2	NameString	read-write	The NAME of the Switch User. The user can only 'SET' User NAME. If user tries to 'GET' the user Id, incorrect value would be displayed. This Feature is CURRENTLY NOT APPLICABLE
STR switchUserPassword	1.3.6.1.4.1.4618.1.2.1.3.1.1.3	NameString	read-write	The PASSWORD of the Switch User. This is in an encrypted format. This is not visible to user.The user can only set password . This Feature is CURRENTLY NOT APPLICABLE
USE switchUserPriority	1.3.6.1.4.1.4618.1.2.1.3.1.1.4	UserLoginPriority	read-write	The PRIORITY of the Switch User. User Priority by default is ADMINISTRATOR. This Feature is CURRENTLY NOT APPLICABLE
USE switchUserStatus	1.3.6.1.4.1.4618.1.2.1.3.1.1.5	UserLoginStatus	read-write	Checks whether user is a valid user. Only the user with administrative privilege can login. This Feature is CURRENTLY NOT APPLICABLE
switchUsrInfo	1.3.6.1.4.1.4618.1.2.1.3
STR switchVerDescr	1.3.6.1.4.1.4618.1.2.1.1.8	DisplayString	read-only	The description of switch version
STR switchVerICC	1.3.6.1.4.1.4618.1.2.1.4.3	DisplayString	read-only	Switch's Process ICC Version number
STR switchVerISDN	1.3.6.1.4.1.4618.1.2.1.4.5	DisplayString	read-only	Switch's Process ISDN Version number
STR switchVerLM	1.3.6.1.4.1.4618.1.2.1.4.1	DisplayString	read-only	Switch's Process LM Version number
STR switchVerMTP2	1.3.6.1.4.1.4618.1.2.1.4.2	DisplayString	read-only	Switch's Process MPT2 Version number
STR switchVerSIG	1.3.6.1.4.1.4618.1.2.1.4.4	DisplayString	read-only	Switch's Process SIG Version number
STR switchVersion	1.3.6.1.4.1.4618.1.2.1.1.7	DisplayString	read-only	The version of current Switch
switchVersionGrp	1.3.6.1.4.1.4618.1.2.1.4
STR switchVerSPHR	1.3.6.1.4.1.4618.1.2.1.4.6	DisplayString	read-only	Switch's Process SPHR Version number
STR systemDescr	1.3.6.1.4.1.4618.1.2.1.1.9	DisplayString	read-only	The description of the System
trace	1.3.6.1.4.1.4618.1.2.6.3
STR trapBitMapStatus	1.3.6.1.4.1.4618.1.2.7.1.44	DisplayString	read-only	Indicates the Bit Map Status of the Cics that are blocked. This Status is only valid for GROUPBLOCKING (I.e range >1)
INT trapBucketSize	1.3.6.1.4.1.4618.1.2.7.1.23	INTEGER	read-only	Indicate the process Bucket size for the Process for which the trap has occured
STR trapCause	1.3.6.1.4.1.4618.1.2.7.1.14	DisplayString	read-only	Cause indicates Causes for ISUP related alarms: BLOCKING UNBLOCKING INVALIDRNG GROUPBLOCKING GROUPUNBLOCKACK RESETCIRCUIT RESETRELCOMP GROUPRESETCIRCUIT GROUPRESETACK CIRCUITQUERYRESP VALIDATIONSUCCESS VALIDATIONFAILED VALIDATIONFAILEDWRONGCLLI OTHERS
STR trapCdrFileName	1.3.6.1.4.1.4618.1.2.7.1.17	DisplayString	read-only	Indicates the CDR file name or file directory. Can be any combination of alphanumeric characters. Spaces are allowed and cannot exceed 255 characters.
INT trapCdrFileSeqNum	1.3.6.1.4.1.4618.1.2.7.1.16	INTEGER	read-only	Indicate the sequence number of the cdr file that has abnormal situation
INT trapChnlId	1.3.6.1.4.1.4618.1.2.7.1.8	INTEGER	read-only	Indicate the id of the channel that has abnormal situation
INT trapCicrange	1.3.6.1.4.1.4618.1.2.7.1.13	INTEGER	read-only	Integer identifying the range ex. no. cics.
INT trapCicvalue	1.3.6.1.4.1.4618.1.2.7.1.12	INTEGER	read-only	Indicate Circuit Identification Code value.
INT trapDbId	1.3.6.1.4.1.4618.1.2.7.1.9	INTEGER	read-only	Indicate the id of the database that has abnormal situation
STR trapDirectory	1.3.6.1.4.1.4618.1.2.7.1.28	DisplayString	read-only	indicate the Cdr File Directory
INT trapDpc	1.3.6.1.4.1.4618.1.2.7.1.15	INTEGER	read-only	Indicate the point code of the switch
INT trapFanNo	1.3.6.1.4.1.4618.1.2.7.1.42	INTEGER	read-only	Indicate the Fan Number
INT trapInterfaceId	1.3.6.1.4.1.4618.1.2.7.1.7	INTEGER	read-only	Indicate the id of the interface that has abnormal situation
INT trapIntfcId	1.3.6.1.4.1.4618.1.2.7.1.35	INTEGER	read-only	Indicate the Power supply number
INT trapIntId	1.3.6.1.4.1.4618.1.2.7.1.34	INTEGER	read-only	Indicate the Power supply number
INT trapLanId	1.3.6.1.4.1.4618.1.2.7.1.36	INTEGER	read-only	Indicate theLan ID
INT trapLinkId	1.3.6.1.4.1.4618.1.2.7.1.3	INTEGER	read-only	Indicate the id of the link that abnormal situation
STR trapLinkName	1.3.6.1.4.1.4618.1.2.7.1.10	NameString	read-only	Indicate the name of the link that has abnormal situation
STR trapLogErrcause	1.3.6.1.4.1.4618.1.2.7.1.31	DisplayString	read-only	Indicate the Log error operation cause
INT trapLogErrNo	1.3.6.1.4.1.4618.1.2.7.1.32	INTEGER	read-only	Indicate the log cdr error number of the operation
STR trapLogFileName	1.3.6.1.4.1.4618.1.2.7.1.30	DisplayString	read-only	Indicate the Log file name. Can be any combination of alphanumeric characters. Spaces are allowed and cannot exceed 64 characters.
INT trapMeasErrCause	1.3.6.1.4.1.4618.1.2.7.1.18	INTEGER	read-only	Indicates the Measurement Files error operation cause
INT trapMeasErrNum	1.3.6.1.4.1.4618.1.2.7.1.19	INTEGER	read-only	Indicates the Measurement Files error number of the operation
STR trapMeasFileName	1.3.6.1.4.1.4618.1.2.7.1.27	DisplayString	read-only	indicate the Measurement file name. Can be any combination of alphanumeric characters. Spaces are allowed and cannot exceed 64 characters.
INT trapNode1Id	1.3.6.1.4.1.4618.1.2.7.1.24	INTEGER	read-only	Indicates the src Xconnect Id which cause congestion
INT trapNode2Id	1.3.6.1.4.1.4618.1.2.7.1.25	INTEGER	read-only	Indicates the dest Xconnect Id which cause congestion
INT trapnumXlinks	1.3.6.1.4.1.4618.1.2.7.1.37	INTEGER	read-only	Indicate the no of existing links
trapObjects	1.3.6.1.4.1.4618.1.2.7.1
INT trapOpc	1.3.6.1.4.1.4618.1.2.7.1.1	INTEGER	read-only	Indicate the point code of the switch that send trap
INT trapPortId	1.3.6.1.4.1.4618.1.2.7.1.5	INTEGER	read-only	Indicate the id of the port that has abnormal situation
INT trapProcessId	1.3.6.1.4.1.4618.1.2.7.1.22	INTEGER	read-only	Indicate the process id for that trap has occured
INT trapProcessorId	1.3.6.1.4.1.4618.1.2.7.1.29	INTEGER	read-only	Indicates the Process Id
INT trapProcInstNo	1.3.6.1.4.1.4618.1.2.7.1.40	INTEGER	read-only	Indicate the Process instance number
STR trapProcName	1.3.6.1.4.1.4618.1.2.7.1.41	DisplayString	read-only	Indicate the Process name that Failed
INT trapPsuNo	1.3.6.1.4.1.4618.1.2.7.1.33	INTEGER	read-only	Indicate the Power supply number
INT trapRepeatNum	1.3.6.1.4.1.4618.1.2.7.1.20	INTEGER	read-only	Indicate the count that trap has occured
STR trapRoutename	1.3.6.1.4.1.4618.1.2.7.1.26	DisplayString	read-only	indicate the xoute name that is not found between the xlink
STR trapSeverity	1.3.6.1.4.1.4618.1.2.7.1.21	DisplayString	read-only	Indicate the severity of the sent trap
INT trapSlotId	1.3.6.1.4.1.4618.1.2.7.1.4	INTEGER	read-only	Indicate the id of the slot that has abnormal situation
INT trapSwitchId1	1.3.6.1.4.1.4618.1.2.7.1.38	INTEGER	read-only	Indicate the xconnect Id
INT trapSwitchId2	1.3.6.1.4.1.4618.1.2.7.1.39	INTEGER	read-only	Indicate the xconnect Id
STR trapSwitchName	1.3.6.1.4.1.4618.1.2.7.1.11	DisplayString	read-only	Indicate the name
INT trapTrunkId	1.3.6.1.4.1.4618.1.2.7.1.6	INTEGER	read-only	Indicate the id of the trunk that has abnormal situation
STR trapUserName	1.3.6.1.4.1.4618.1.2.7.1.43	NameString	read-only	indicates the user login Name
INT trapXconnectId	1.3.6.1.4.1.4618.1.2.7.1.2	INTEGER	read-only	Indicate the id of the xconnect that send trap
trnkGrp	1.3.6.1.4.1.4618.1.2.2.3
INT trunkGrpCarrierId	1.3.6.1.4.1.4618.1.2.2.3.1.1.3	INTEGER	read-write	Denotes Carrier id for this trunk group. The Carrier id Field is an integer of length 4. An example for Carried Id is: 1234 NOTE: The format for sertting the Carrier Id needs to strictly followed. Failure to follow this format will result in unsucces
CDR trunkGrpCdrFlag	1.3.6.1.4.1.4618.1.2.2.3.1.1.7	CdrFlag	read-write	Denotes Cdr Flag : Possible values are: 0) noCdr -> default (No CDR file is required) 1) IC -> for Incoming calls 2) OG -> for Outgoing calls 3) BI -> for both the Incoming and outgoing calls
trunkGrpCfgEntry	1.3.6.1.4.1.4618.1.2.2.3.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
trunkGrpCfgTable	1.3.6.1.4.1.4618.1.2.2.3.1		not-accessible	SS7/ISDN Trunk Group Table. The Information about Trunk Groups in MSSC are provided in this table. This table has the index trunkGrpId (Integer).
INT trunkGrpId	1.3.6.1.4.1.4618.1.2.2.3.1.1.1	INTEGER	read-write	Denotes Id for this trunk group. Range for Id is 1-65535.
STR trunkGrpName	1.3.6.1.4.1.4618.1.2.2.3.1.1.2	DisplayString	read-write	Denotes Name of this trunk group. The Name is a string of length 8. The first two characters of Name have to be alphabhets. The next 6 charecters are numeric. An example a valid Trunk Group Name is ab123456. NOTE: This format needs to be strictly foll
INT trunkGrpNoOfTrunks	1.3.6.1.4.1.4618.1.2.2.3.1.1.8	INTEGER	read-only	Denotes the Number Of Trunks that are contained in this trunk Group
OPS trunkGrpOpStatus	1.3.6.1.4.1.4618.1.2.2.3.1.1.11	OpStatus	read-only	Current Status (Operational Status) of this Trunk Group. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
STR trunkGrpRoffName	1.3.6.1.4.1.4618.1.2.2.3.1.1.5	NameString	read-write	Denotes Remote Office Name: NOTE: Value for this object is NOT Valid if TrunkGrpType is ISDN. Only Valid For SS7 TrunkGroup. If trunkGrpType is ISDN and the USER sets the value for Remote Office Name, then this Remote Office Name will be ignored when
ROF trunkGrpRoffType	1.3.6.1.4.1.4618.1.2.2.3.1.1.6	RoffType	read-write	Denotes Remote Office Type: NOTE: Value for this object is NOT Valid if TrunkGrpType is ISDN. Remote Office Type is only Valid For SS7 TrunkGroup.If trunkGrpType is ISDN and the USER sets the value for Remote Office Type, then this value is ignored w
ROW trunkGrpRowStatus	1.3.6.1.4.1.4618.1.2.2.3.1.1.10	RowStatus	read-write	Current Status (configurational Status) of this Trunk Group. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3)
TRN trunkGrpType	1.3.6.1.4.1.4618.1.2.2.3.1.1.4	TrnkGrpType	read-write	Denotes Trunk group type. Possible values for Trunk group are: 1. ss7 2. isdn
VOI trunkGrpVoicePcm	1.3.6.1.4.1.4618.1.2.2.3.1.1.9	VoicePcm	read-write
NTF updateDBAuditOpStatNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.116			Info : Updated the Database for Audited Related Operational Status
xconnect	1.3.6.1.4.1.4618.1.2.2.5
NTF xconnectBkplaneRefClkClearNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.12			Info : Back Plane reference clock clear
NTF xconnectBkplaneRefClkFailNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.13			Info : Back Plane reference clock fail
NTF xconnectCardInsertionNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.16			Info : A card is inserted in xconnect
NTF xconnectCardRemovalNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.17			Info : A card is removed from xconnect
xconnectCfgEntry	1.3.6.1.4.1.4618.1.2.2.5.1.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
xconnectCfgTable	1.3.6.1.4.1.4618.1.2.2.5.1		not-accessible	XConnext Table. Information about XConnect(s) in MSSC are provided in this table. The index for this table is xconnectId(Integer).
NTF xconnectClkClearNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.10			Info : Stratum Card is available
NTF xconnectClkFailNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.11			Info : Stratum Card has either been removed or has failed
NTF xconnectCPUSwitchOverNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.29			Info : XConnect CPU SwitchOver
NTF xconnectDnNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.9			Info : switch has a failure on TCP/IP link between MSCG and AC120
INT xconnectId	1.3.6.1.4.1.4618.1.2.2.5.1.1.1	INTEGER	read-write	Xconnect id. Can be any integer 1-65535.
INT xconnectIdEndA	1.3.6.1.4.1.4618.1.2.2.5.2.1.1	INTEGER	read-write	Xconnect id for one end. Can be any integer 1-65535.
INT xconnectIdEndB	1.3.6.1.4.1.4618.1.2.2.5.2.1.4	INTEGER	read-write	Xconnect id for the other end. Can be any integer 1-65535.
NTF xconnectIllegalCardTypeNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.18			Info : Illegal Card Type
NTF xconnectInterfaceInServiceNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.14			Info : Switch has successfully brought the specified interface to be in service
NTF xconnectInterfaceOutOfServiceNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.15			Info : An interface card is out of service
NTF xconnectIntfCreateNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.23			Info : Interface in AC120 has been created
NTF xconnectIntfDeleteNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.24			Info : Interface in AC120 has been deleted
NTF xconnectIntfFarEndAISNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.20			Info : Interface Far end AIS
NTF xconnectIntfFarEndLOFNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.19			Info : Interface Far end LOF
NTF xconnectIntfNearEndLOFNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.21			Info : Interface Near end LOF
NTF xconnectIntfNearEndLOSNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.22			Info : Interface Near end LOS
IP xconnectIPAddr	1.3.6.1.4.1.4618.1.2.2.5.1.1.3	IpAddress	read-write	Xconnect IP address. Submit in xxx.xxx.xxx.xxx format.
STR xconnectName	1.3.6.1.4.1.4618.1.2.2.5.1.1.2	NameString	read-write	Xconnect name. Can be any combination of alphanumeric characters. Spaces are not allowed and cannot exceed 15 characters.
OPS xconnectOpStatus	1.3.6.1.4.1.4618.1.2.2.5.1.1.6	OpStatus	read-only	Current Status (Operational Status) of this XConnect. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
NTF xconnectPortUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.28			Info : Port is Up
ROW xconnectRowStatus	1.3.6.1.4.1.4618.1.2.2.5.1.1.5	RowStatus	read-write	Current Status (configurational Status) of this XConnect. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) not
INT xconnectTCPPort	1.3.6.1.4.1.4618.1.2.2.5.1.1.4	INTEGER	read-write	Xconnect TCP port. Can be any integer 1-65535.
NTF xconnectUpNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.8			Info : switch has successfully brought up TCP/IP link between MSCG and AC 120 xconnect
NTF xconnectXlinkAdjConClrNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.25			Info : Xconnect Adjacent Congestion cleared
NTF xconnectXlinkAdjConNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.26			Info : Xconnect Adjacent Congestion Notified
NTF xconnectXlinkRouteFailNotify	1.3.6.1.4.1.4618.1.2.7.2.1.0.27			Info : Xpath not found between the Xlink
INT xconnIdEndA	1.3.6.1.4.1.4618.1.2.2.5.3.1.1	INTEGER	read-only	Xconnect id for one end. Can be any integer 1-65535.
INT xconnIdEndB	1.3.6.1.4.1.4618.1.2.2.5.3.1.4	INTEGER	read-only	Xconnect id for the other end. Can be any integer 1-65535.
INT xconnPortIdEndA	1.3.6.1.4.1.4618.1.2.2.5.3.1.3	INTEGER	read-only	Port id of one end.
INT xconnPortIdEndB	1.3.6.1.4.1.4618.1.2.2.5.3.1.6	INTEGER	read-only	Port id of the other end.
INT xconnSlotIdEndA	1.3.6.1.4.1.4618.1.2.2.5.3.1.2	INTEGER	read-only	Slot Id of one end.
INT xconnSlotIdEndB	1.3.6.1.4.1.4618.1.2.2.5.3.1.5	INTEGER	read-only	Slot Id of the other end.
xlinkCfgEntry	1.3.6.1.4.1.4618.1.2.2.5.2.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
xlinkCfgTable	1.3.6.1.4.1.4618.1.2.2.5.2		not-accessible	XLink Table. Information about XLink(s) in MSSC are provided in this table.This table has six indices: xconnectIdEndA, slotIdEndA, portIdEndA,xconnectIdEndB, xconnectIdEndB,slotIdEndB,portIdEndB (all Integers)
CON xlinkConnectionType	1.3.6.1.4.1.4618.1.2.2.5.2.1.7	ConnectionType	read-write	Connection Type between the Xconnects The possible options are : 1) Unchannelised DS3 (ut3) 2) Channelised DS3 (t3)
ENA xlinkMgmntCmd	1.3.6.1.4.1.4618.1.2.2.5.3.1.7	EnableOperation	read-write	Management Command for Enabling/Disabling XLink The possible options are : 1) Enable 2) Disable [default]
xlinkMgmntEntry	1.3.6.1.4.1.4618.1.2.2.5.3.1		not-accessible	The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
xlinkMgmntTable	1.3.6.1.4.1.4618.1.2.2.5.3		not-accessible	XLink Management Table. This table has six indices: xconnectIdEndA, slotIdEndA, portIdEndA,xconnectIdEndB, xconnectIdEndB,slotIdEndB,portIdEndB (all Integers)
OPS xlinkOpStatus	1.3.6.1.4.1.4618.1.2.2.5.2.1.9	OpStatus	read-only	Current Status (Operational Status) of this XConnect Link. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
ROW xlinkRowStatus	1.3.6.1.4.1.4618.1.2.2.5.2.1.8	RowStatus	read-write	Current Status (configurational Status) of this XCONNECT Link. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3

RFC description

SNMP v1 MIB for Armillaire MSSC platform system management.

Start monitoring Armillaire 2000 network monitoring probe system (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ARMILLAIRE2000-MIB

What Is ARMILLAIRE2000-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description