ALTEON-CS-PHYSICAL-MIB

All MIBs › ALTEON-CS-PHYSICAL-MIB

Organization: Radware Ltd.

Last Updated: 2009-08-05

Category: Vendor: Alteon

Description: Alteon content switch physical MIB for managing hardware inventory, chassis slots, and physical interface status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALTEON-CS-PHYSICAL-MIB?

ALTEON-CS-PHYSICAL-MIB is part of Alteon's (Nortel/Radware content-switch heritage) AlteonOS MIB family; despite its "physical" name, per its module description and sample objects this particular module actually models Layer 2 configuration, statistics, and VLAN information rather than chassis/slot physical inventory. It defines VLAN capacity limits (vlanMaxEnt, vlanMaxVlanID) and a current VLAN configuration table (vlanCurCfgTable/Entry) with per-VLAN name, member ports, bandwidth contract, spanning-tree group, jumbo-frame, and MAC-learning settings, organized under layer2Configs/layer2Stats/layer2Info groups. Its monitoring value is primarily configuration and L2 operational visibility: administrators verify VLAN membership, spanning-tree grouping, and per-VLAN settings like jumbo-frame support and bandwidth contracts, useful for diagnosing VLAN misconfiguration rather than hardware faults. It complements Alteon's broader physical/chassis and Layer 3 MIB modules as part of the full AlteonOS management suite. It is deployed on Alteon content/application switches in load-balancing deployments where L2 VLAN configuration needs to be audited or automated via SNMP. Engineers can download the ALTEON-CS-PHYSICAL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALTEON-CS-PHYSICAL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alteon (Nortel/Radware) content/application switch

Monitoring Examples

An administrator would poll vlanCurCfgTable to confirm vlanCurCfgPorts and vlanCurCfgStg for a given vlanCurCfgVlanId, checking vlanCurCfgJumbo and vlanCurCfgBwmContract when diagnosing throughput issues on a specific VLAN. If a device unexpectedly can't reach others on the same VLAN, comparing vlanCurCfgVlanName and port membership across switches would reveal a VLAN ID or naming mismatch. vlanMaxEnt and vlanMaxVlanID give the platform's VLAN capacity limits for planning purposes.

What Can Be Monitored

VLAN membership/ports
VLAN name
spanning-tree group per VLAN
jumbo frame setting per VLAN
bandwidth contract per VLAN
VLAN capacity limits

Imported Objects

From ALTEON-ROOT-MIB

aws-switch

From BRIDGE-MIB

BridgeId

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
PhysAddress

How to Use in IPNetwork Monitor

Example using fdbStatsCreates OID:

Select an Alteon (Nortel/Radware) Cheetah-based application switch (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type fdbStatsCreates into the Find box to locate it in the OID tree, then select it and click OK. It reports the number of entries created in the Forwarding Database. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
I32 cistBridgeForwardDelay	1.3.6.1.4.1.1872.2.5.2.3.4.1.6	Integer32	read-only	The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
I32 cistBridgeHelloTime	1.3.6.1.4.1.1872.2.5.2.3.4.1.4	Integer32	read-only	The amount of time between the transmission of Configuration bridge PDUs in seconds.
I32 cistBridgeMaxAge	1.3.6.1.4.1.1872.2.5.2.3.4.1.5	Integer32	read-only	The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
cistGeneralInfo	1.3.6.1.4.1.1872.2.5.2.3.4.1
cistInfo	1.3.6.1.4.1.1872.2.5.2.3.4
BRI cistInfoPortDesignatedBridge	1.3.6.1.4.1.1872.2.5.2.3.4.2.1.6	BridgeId	read-only	The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
OCT cistInfoPortDesignatedPort	1.3.6.1.4.1.1872.2.5.2.3.4.2.1.7	OCTET STRING	read-only	The Port identifier of the port on the Designated Bridge for this port's segment.
I32 cistInfoPortIndex	1.3.6.1.4.1.1872.2.5.2.3.4.2.1.1	Integer32	read-only	The port number of the port for which this entry contains spanning tree configuration.
INT cistInfoPortLinkType	1.3.6.1.4.1.1872.2.5.2.3.4.2.1.8	INTEGER	read-only	The point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port is being treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port is being treated as having a shared media connection.
I32 cistInfoPortPathCost	1.3.6.1.4.1.1872.2.5.2.3.4.2.1.3	Integer32	read-only	The contribution of this port to the path cost of paths towards the CIST Root which include this port.
I32 cistInfoPortPriority	1.3.6.1.4.1.1872.2.5.2.3.4.2.1.2	Integer32	read-only	The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
INT cistInfoPortRole	1.3.6.1.4.1.1872.2.5.2.3.4.2.1.5	INTEGER	read-only	Selected Port Role of the port for this spanning tree instance.
INT cistInfoPortState	1.3.6.1.4.1.1872.2.5.2.3.4.2.1.4	INTEGER	read-only	Current state of the Port as defined by the Common spanning tree protocol.
cistInfoPortTable	1.3.6.1.4.1.1872.2.5.2.3.4.2		not-accessible	The table of CIST Port information.
cistInfoPortTableEntry	1.3.6.1.4.1.1872.2.5.2.3.4.2.1		not-accessible	Information about a particular CIST Port.
I32 cistRegionalPathCost	1.3.6.1.4.1.1872.2.5.2.3.4.1.8	Integer32	read-only	The Cost of the path to the CIST Regional Root as seen from this bridge.
BRI cistRegionalRoot	1.3.6.1.4.1.1872.2.5.2.3.4.1.7	BridgeId	read-only	The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
BRI cistRoot	1.3.6.1.4.1.1872.2.5.2.3.4.1.1	BridgeId	read-only	The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
I32 cistRootPathCost	1.3.6.1.4.1.1872.2.5.2.3.4.1.2	Integer32	read-only	The cost of the path to the CIST Root as seen from this bridge.
I32 cistRootPort	1.3.6.1.4.1.1872.2.5.2.3.4.1.3	Integer32	read-only	The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
INT fdbClear	1.3.6.1.4.1.1872.2.5.2.3.1.1	INTEGER	read-write	Setting this value to clear(2) clears the entire master FDB.
fdbEntry	1.3.6.1.4.1.1872.2.5.2.3.1.2.1		not-accessible	A row in the FDB table
fdbInfo	1.3.6.1.4.1.1872.2.5.2.3.1
I32 fdbLearnedPort	1.3.6.1.4.1.1872.2.5.2.3.1.2.1.6	Integer32	read-only	The learned port associated with this FDB entry.
PHY fdbMacAddr	1.3.6.1.4.1.1872.2.5.2.3.1.2.1.1	PhysAddress	read-only	The MAC address for the FDB entry.
STR fdbRefSps	1.3.6.1.4.1.1872.2.5.2.3.1.2.1.5	DisplayString	read-only	The referenced SPs associated with this FDB entry.
I32 fdbSrcPort	1.3.6.1.4.1.1872.2.5.2.3.1.2.1.3	Integer32	read-only	Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address.
I32 fdbSrcTrunk	1.3.6.1.4.1.1872.2.5.2.3.1.2.1.7	Integer32	read-only	Either the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the source address is not associated with a trunk.
INT fdbState	1.3.6.1.4.1.1872.2.5.2.3.1.2.1.4	INTEGER	read-only	The state of the FDB entry. The meanings of the values are : unknown(1) : the MAC address has not yet been learned by the switch but has only been seen as a destination address forward(3) : the MAC address has been learned by the switch flood(4) : the MAC address is a multicast destination address trunk(6) : frames with this MAC address are forwarded to trunk group vir(7) : frames with this MAC address are forwarded for L3 processing
fdbStats	1.3.6.1.4.1.1872.2.5.2.2.1
C32 fdbStatsCreatesEx	1.3.6.1.4.1.1872.2.5.2.2.1.1	Counter32	read-only	Number of entries created in the Forwarding Database.
G32 fdbStatsCurrent	1.3.6.1.4.1.1872.2.5.2.2.1.3	Gauge32	read-only	Current number of entries in the Forwarding Database.
C32 fdbStatsDeletes	1.3.6.1.4.1.1872.2.5.2.2.1.2	Counter32	read-only	Number of entries deleted from the Forwarding Database.
C32 fdbStatsFindFails	1.3.6.1.4.1.1872.2.5.2.2.1.8	Counter32	read-only	Number of search failures in the Forwarding Database.
C32 fdbStatsFindOrCreates	1.3.6.1.4.1.1872.2.5.2.2.1.9	Counter32	read-only	Number of entries found or created in the Forwarding Database.
C32 fdbStatsFinds	1.3.6.1.4.1.1872.2.5.2.2.1.7	Counter32	read-only	Number of searches in the Forwarding Database.
I32 fdbStatsHiwat	1.3.6.1.4.1.1872.2.5.2.2.1.4	Integer32	read-only	Highest number of entries recorded at any given time in the Forwarding Database.
C32 fdbStatsLookupFails	1.3.6.1.4.1.1872.2.5.2.2.1.6	Counter32	read-only	Number of unsuccessful searches made in the Forwarding Database.
C32 fdbStatsLookups	1.3.6.1.4.1.1872.2.5.2.2.1.5	Counter32	read-only	Number of entry lookups in the Forwarding Database.
C32 fdbStatsOverflows	1.3.6.1.4.1.1872.2.5.2.2.1.10	Counter32	read-only	Number of entries overflowing the Forwarding Database.
fdbTable	1.3.6.1.4.1.1872.2.5.2.3.1.2		not-accessible	The table of FDB entries.
I32 fdbVlan	1.3.6.1.4.1.1872.2.5.2.3.1.2.1.2	Integer32	read-only	The VLAN ID for the FDB entry.
lacp	1.3.6.1.4.1.1872.2.5.2.1.5
INT lacpCurPortActorAdminKey	1.3.6.1.4.1.1872.2.5.2.1.5.7.1.4	INTEGER	read-only	The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
INT lacpCurPortActorPortPriority	1.3.6.1.4.1.1872.2.5.2.1.5.7.1.3	INTEGER	read-only	The priority value assigned to this Aggregation Port. This 16-bit value is read-only.
lacpCurPortCfgTable	1.3.6.1.4.1.1872.2.5.2.1.5.7		not-accessible	The table of LACP port configuration.
lacpCurPortCfgTableEntry	1.3.6.1.4.1.1872.2.5.2.1.5.7.1		not-accessible	A row in the LACP port configuration table.
I32 lacpCurPortCfgTableId	1.3.6.1.4.1.1872.2.5.2.1.5.7.1.1	Integer32	read-only	LACP port number.
INT lacpCurPortState	1.3.6.1.4.1.1872.2.5.2.1.5.7.1.2	INTEGER	read-only	LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.
STR lacpCurSystemName	1.3.6.1.4.1.1872.2.5.2.1.5.9	DisplayString	read-only	LACP System Name
INT lacpCurSystemPriority	1.3.6.1.4.1.1872.2.5.2.1.5.1	INTEGER	read-only	A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
INT lacpCurSystemTimeoutTime	1.3.6.1.4.1.1872.2.5.2.1.5.5	INTEGER	read-only	If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
lacpInfo	1.3.6.1.4.1.1872.2.5.2.3.3
I32 lacpInfoPortIndex	1.3.6.1.4.1.1872.2.5.2.3.3.1.1.1	Integer32	read-only	The port identifier.
INT lacpInfoPortMoved	1.3.6.1.4.1.1872.2.5.2.3.3.1.1.5	INTEGER	read-only	Port Moved flag is set to true if the receive machine for a port is in the port_disabled state, and the combination of partner oper system and partner oper port number in use by the port has been used by received in an incoming LACPDU on a different port.
INT lacpInfoPortNtt	1.3.6.1.4.1.1872.2.5.2.3.3.1.1.3	INTEGER	read-only	Need to transmit flag. True indicates that there is new protocol information that should be transmitted on the link.
INT lacpInfoPortReadyN	1.3.6.1.4.1.1872.2.5.2.3.3.1.1.4	INTEGER	read-only	True value for Ready_N flag indicates that the wait while timer has expired and it is waiting to attach to an aggregator. There is one Ready_N value for each port.
INT lacpInfoPortSelected	1.3.6.1.4.1.1872.2.5.2.3.3.1.1.2	INTEGER	read-only	Selected flag value indicates that the selection logic has selected an appropriate Aggregator. A value of unselected indicates that no aggregator is currently selected. A value of standby indicates that although the selection logic has selected an appropriate Aggregator, aggregation restrictions currently precent the port from being enabled as part of the aggregation, and so the port is being held in standby condition.
lacpInfoPortTable	1.3.6.1.4.1.1872.2.5.2.3.3.1		not-accessible	The table of LACP port information.
lacpInfoPortTableEntry	1.3.6.1.4.1.1872.2.5.2.3.3.1.1		not-accessible	Information about a LACP port.
INT lacpNewPortActorAdminKey	1.3.6.1.4.1.1872.2.5.2.1.5.8.1.4	INTEGER	read-write	The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance.
INT lacpNewPortActorPortPriority	1.3.6.1.4.1.1872.2.5.2.1.5.8.1.3	INTEGER	read-write	The priority value assigned to this Aggregation Port. This 16-bit value is read-write.
lacpNewPortCfgTable	1.3.6.1.4.1.1872.2.5.2.1.5.8		not-accessible	The table of LACP port configuration.
lacpNewPortCfgTableEntry	1.3.6.1.4.1.1872.2.5.2.1.5.8.1		not-accessible	A row in the LACP port configuration table.
I32 lacpNewPortCfgTableId	1.3.6.1.4.1.1872.2.5.2.1.5.8.1.1	Integer32	read-only	LACP port number.
INT lacpNewPortState	1.3.6.1.4.1.1872.2.5.2.1.5.8.1.2	INTEGER	read-write	LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.
STR lacpNewSystemName	1.3.6.1.4.1.1872.2.5.2.1.5.10	DisplayString	read-write	LACP System Name
INT lacpNewSystemPriority	1.3.6.1.4.1.1872.2.5.2.1.5.2	INTEGER	read-write	A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
INT lacpNewSystemTimeoutTime	1.3.6.1.4.1.1872.2.5.2.1.5.6	INTEGER	read-write	If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
layer2	1.3.6.1.4.1.1872.2.5.2			The MIB module for the Alteon OS Layer2 configuration, statistics and information .
layer2Configs	1.3.6.1.4.1.1872.2.5.2.1
layer2Info	1.3.6.1.4.1.1872.2.5.2.3
layer2Oper	1.3.6.1.4.1.1872.2.5.2.4
layer2Stats	1.3.6.1.4.1.1872.2.5.2.2
mirroring	1.3.6.1.4.1.1872.2.5.2.1.4
mirrPortMirr	1.3.6.1.4.1.1872.2.5.2.1.4.1
mstCfg	1.3.6.1.4.1.1872.2.5.2.1.7
mstCistBridgeCfg	1.3.6.1.4.1.1872.2.5.2.1.7.2.2
mstCistCfg	1.3.6.1.4.1.1872.2.5.2.1.7.2
INT mstCistCurCfgBridgeForwardDelay	1.3.6.1.4.1.1872.2.5.2.1.7.2.2.7	INTEGER	read-only	The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
INT mstCistCurCfgBridgeMaxAge	1.3.6.1.4.1.1872.2.5.2.1.7.2.2.5	INTEGER	read-only	The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
INT mstCistCurCfgBridgePriority	1.3.6.1.4.1.1872.2.5.2.1.7.2.2.1	INTEGER	read-only	The value of the writable portion of the Brigde Identifier comprising of the first two octets.
INT mstCistCurCfgPortEdge	1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.5	INTEGER	read-only	The value of the Edge Port parameter.
INT mstCistCurCfgPortHelloTime	1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.7	INTEGER	read-only	The amount of time between the transmission of Configuration Port PDUs in seconds.
I32 mstCistCurCfgPortIndex	1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.1	Integer32	read-only	The port number of the port for which this entry contains spanning tree configuration.
INT mstCistCurCfgPortLinkType	1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.4	INTEGER	read-only	The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
INT mstCistCurCfgPortPathCost	1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.3	INTEGER	read-only	The contribution of this port to the path cost of paths towards the CIST Root which include this port.
INT mstCistCurCfgPortPriority	1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.2	INTEGER	read-only	The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
INT mstCistCurCfgPortStpState	1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.6	INTEGER	read-only	Turn port's Spanning Tree on/off.
mstCistCurCfgPortTable	1.3.6.1.4.1.1872.2.5.2.1.7.2.3		not-accessible	The table of CIST Port configuration.
mstCistCurCfgPortTableEntry	1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1		not-accessible	Information about a particular CIST Port configuration.
INT mstCistDefaultCfg	1.3.6.1.4.1.1872.2.5.2.1.7.2.1	INTEGER	read-write	Setting the value to default(1) will set the Multiple Spanning Tree and member parameters to default. default(1) is always returned when read, but it does not mean anything.
INT mstCistNewCfgBridgeForwardDelay	1.3.6.1.4.1.1872.2.5.2.1.7.2.2.8	INTEGER	read-write	The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
INT mstCistNewCfgBridgeMaxAge	1.3.6.1.4.1.1872.2.5.2.1.7.2.2.6	INTEGER	read-write	The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
INT mstCistNewCfgBridgePriority	1.3.6.1.4.1.1872.2.5.2.1.7.2.2.2	INTEGER	read-write	The value of the writable portion of the Brigde Identifier comprising of the first two octets.
INT mstCistNewCfgPortEdge	1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.5	INTEGER	read-write	The value of the Edge Port parameter.
INT mstCistNewCfgPortHelloTime	1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.7	INTEGER	read-write	The amount of time between the transmission of Configuration Port PDUs in seconds.
I32 mstCistNewCfgPortIndex	1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.1	Integer32	read-only	The port number of the port for which this entry contains spanning tree configuration.
INT mstCistNewCfgPortLinkType	1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.4	INTEGER	read-write	The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
INT mstCistNewCfgPortPathCost	1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.3	INTEGER	read-write	The contribution of this port to the path cost of paths towards the CIST Root which include this port.
INT mstCistNewCfgPortPriority	1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.2	INTEGER	read-write	The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
INT mstCistNewCfgPortStpState	1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.6	INTEGER	read-write	Turn port's Spanning Tree on/off.
mstCistNewCfgPortTable	1.3.6.1.4.1.1872.2.5.2.1.7.2.4		not-accessible	The table of CIST Port configuration.
mstCistNewCfgPortTableEntry	1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1		not-accessible	Information about a particular CIST Port configuration.
INT mstCurCfgMaxHopCount	1.3.6.1.4.1.1872.2.5.2.1.7.1.7	INTEGER	read-only	Indicates the maximum hop count value.
STR mstCurCfgRegionName	1.3.6.1.4.1.1872.2.5.2.1.7.1.3	DisplayString	read-only	The Name for the Region's configuration.
INT mstCurCfgRegionVersion	1.3.6.1.4.1.1872.2.5.2.1.7.1.5	INTEGER	read-only	Version of the MST Region.
INT mstCurCfgState	1.3.6.1.4.1.1872.2.5.2.1.7.1.1	INTEGER	read-only	Enable or disable MSTP/RSTP
INT mstCurCfgStpMode	1.3.6.1.4.1.1872.2.5.2.1.7.1.9	INTEGER	read-only	The version of Spanning Tree Protocal the bridge is currently running.
mstGeneralCfg	1.3.6.1.4.1.1872.2.5.2.1.7.1
INT mstNewCfgMaxHopCount	1.3.6.1.4.1.1872.2.5.2.1.7.1.8	INTEGER	read-write	Indicates the maximum hop count value.
STR mstNewCfgRegionName	1.3.6.1.4.1.1872.2.5.2.1.7.1.4	DisplayString	read-write	The Name for the Region's configuration.
INT mstNewCfgRegionVersion	1.3.6.1.4.1.1872.2.5.2.1.7.1.6	INTEGER	read-write	Version of the MST Region.
INT mstNewCfgState	1.3.6.1.4.1.1872.2.5.2.1.7.1.2	INTEGER	read-write	Enable or disable MSTP/RSTP
INT mstNewCfgStpMode	1.3.6.1.4.1.1872.2.5.2.1.7.1.10	INTEGER	read-write	The version of Spanning Tree Protocal the bridge is currently running.
INT pmCurCfgPmirrDirection	1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.3	INTEGER	read-only	The type of traffic to be monitored with respect to the mirrored port.
I32 pmCurCfgPmirrMirrPortIndex	1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.2	Integer32	read-only	The mirrored port number
I32 pmCurCfgPmirrMoniPortIndex	1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.1	Integer32	read-only	The monitoring port number.
OCT pmCurCfgPmirrPortVlansBmap	1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.6	OCTET STRING	read-only	The mirrored VLANs (1-4096) list for the port. The VLANs are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ vlan 9 \|\| \|\| \|\| \|\|___ vlan 8 \|\| \|____ vlan 7 \|\| . . . \|\|_________ vlan 2 \|__________ vlan 1 where x : 1 - The represented VLAN is being mirrored. 0 - The represented VLAN is not being mirrored. Note: When all octets are zero - all vlan(s) traffic is being for the port
INT pmCurCfgPortMirrState	1.3.6.1.4.1.1872.2.5.2.1.4.1.1	INTEGER	read-only	The state of port-based port mirroring.
pmCurCfgPortMonitorEntry	1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1		not-accessible	A row in the monitoring port table.
pmCurCfgPortMonitorTable	1.3.6.1.4.1.1872.2.5.2.1.4.1.3		not-accessible	The table of monitoring ports.
I32 pmNewCfgAddVlan	1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.7	Integer32	read-create	The VLAN whose traffic is to be mirrored for this port. A '0' value is returned when read.
INT pmNewCfgPmirrDelete	1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.4	INTEGER	read-create	Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
INT pmNewCfgPmirrDirection	1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.3	INTEGER	read-create	The type of traffic to be monitored with respect to the mirrored port.
I32 pmNewCfgPmirrMirrPortIndex	1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.2	Integer32	read-only	The mirrored port number
I32 pmNewCfgPmirrMoniPortIndex	1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.1	Integer32	read-only	The monitoring port number.
OCT pmNewCfgPmirrPortVlansBmap	1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.9	OCTET STRING	read-only	The mirrored VLANs(1-4096) list for the port. The VLANs are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ vlan 9 \|\| \|\| \|\| \|\|___ vlan 8 \|\| \|____ vlan 7 \|\| . . . \|\|_________ vlan 2 \|__________ vlan 1 where x : 1 - The represented VLAN is being mirrored. 0 - The represented VLAN is not being mirrored. Note: All octets are zero means all vlan(s) traffic is being mirrored for the port
INT pmNewCfgPortMirrState	1.3.6.1.4.1.1872.2.5.2.1.4.1.2	INTEGER	read-write	The state of port-based port mirroring.
pmNewCfgPortMonitorEntry	1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1		not-accessible	A row in the monitoring port table.
pmNewCfgPortMonitorTable	1.3.6.1.4.1.1872.2.5.2.1.4.1.4		not-accessible	The table of monitoring ports.
I32 pmNewCfgRemoveVlan	1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.8	Integer32	read-create	The VLAN whose traffic will no longer to be mirrored. A '0' value is returned when read.
portTeamCfg	1.3.6.1.4.1.1872.2.5.2.1.9
I32 portTeamCurCfgIndex	1.3.6.1.4.1.1872.2.5.2.1.9.2.1.1	Integer32	read-only	The identifier of the port team.
STR portTeamCurCfgName	1.3.6.1.4.1.1872.2.5.2.1.9.2.1.5	DisplayString	read-only	Name of the Port Team.
OCT portTeamCurCfgPorts	1.3.6.1.4.1.1872.2.5.2.1.9.2.1.3	OCTET STRING	read-only	The port list in the port team. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \| \|\|\|_ port 8 \| \|\| \| \|\|___ port 7 \| \|____ port 6 \| . . . \|_________ port 1 where x : 1 - The represented port belongs to the port team 0 - The represented port does not belong to the port team
INT portTeamCurCfgState	1.3.6.1.4.1.1872.2.5.2.1.9.2.1.2	INTEGER	read-only	Enable or disable a port team.
portTeamCurCfgTable	1.3.6.1.4.1.1872.2.5.2.1.9.2		not-accessible	The port team current configuration.
portTeamCurCfgTableEntry	1.3.6.1.4.1.1872.2.5.2.1.9.2.1		not-accessible	A row in the port team configuration table.
OCT portTeamCurCfgTrunks	1.3.6.1.4.1.1872.2.5.2.1.9.2.1.4	OCTET STRING	read-only	The trunk list in the port team. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \| \|\|\|_ trunk 8 \| \|\| \| \|\|___ trunk 7 \| \|____ trunk 6 \| . . . \|_________ trunk 1 where x : 1 - The represented trunk belongs to the port team 0 - The represented trunk does not belong to the port team
portTeamInfo	1.3.6.1.4.1.1872.2.5.2.3.6
I32 portTeamInfoIndex	1.3.6.1.4.1.1872.2.5.2.3.6.1.1.1	Integer32	read-only	The identifier of the port team.
STR portTeamInfoMaster	1.3.6.1.4.1.1872.2.5.2.3.6.1.1.7	DisplayString	read-only	The master port/trunk of the port team when team state is ACTIVE.
OCT portTeamInfoPorts	1.3.6.1.4.1.1872.2.5.2.3.6.1.1.3	OCTET STRING	read-only	The port list in the port team. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \| \|\|\|_ port 8 \| \|\| \| \|\|___ port 7 \| \|____ port 6 \| . . . \|_________ port 1 where x : 1 - The represented port is added to the port team 0 - The represented port is not added to the port team
OCT portTeamInfoPortsState	1.3.6.1.4.1.1872.2.5.2.3.6.1.1.4	OCTET STRING	read-only	The port state list in the port team. The ports states are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \| \|\|\|_ port 8 state \| \|\| \| \|\|___ port 7 state \| \|____ port 6 state \| . . . \|_________ port 1 state where x : 1 - The represented port in that team is up 0 - If the represented port is added in that team then the port state is down otherwise the port is not added into that team( check whether port is added to the team or not through the mib portTeamInfoPorts).
INT portTeamInfoState	1.3.6.1.4.1.1872.2.5.2.3.6.1.1.2	INTEGER	read-only	State of a port team.
portTeamInfoTable	1.3.6.1.4.1.1872.2.5.2.3.6.1		not-accessible	The port team information table.
portTeamInfoTableEntry	1.3.6.1.4.1.1872.2.5.2.3.6.1.1		not-accessible	A row in the port team information table.
OCT portTeamInfoTrunks	1.3.6.1.4.1.1872.2.5.2.3.6.1.1.5	OCTET STRING	read-only	The trunk list in the port team. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \| \|\|\|_ trunk 8 \| \|\| \| \|\|___ trunk 7 \| \|____ trunk 6 \| . . . \|_________ trunk 1 where x : 1 - The represented trunk belongs to the port team 0 - The represented trunk does not belong to the port team
OCT portTeamInfoTrunksState	1.3.6.1.4.1.1872.2.5.2.3.6.1.1.6	OCTET STRING	read-only	The trunk state list in the trunk team. The trunks states are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \| \|\|\|_ trunk 8 state \| \|\| \| \|\|___ trunk 7 state \| \|____ trunk 6 state \| . . . \|_________ trunk 1 state where x : 1 - The represented trunk in that team is up 0 - If the represented trunk is added in that team then the trunk state is down otherwise the port is not added into that team( check whether it is added to the team or not through the mib portTeamInfoTrunks).
I32 portTeamNewCfgAddPort	1.3.6.1.4.1.1872.2.5.2.1.9.3.1.4	Integer32	read-create	The port to be added in the port team. When read, 0 is returned.
I32 portTeamNewCfgAddTrunk	1.3.6.1.4.1.1872.2.5.2.1.9.3.1.7	Integer32	read-create	The trunk to be added in the port team. When read, 0 is returned.
INT portTeamNewCfgDelete	1.3.6.1.4.1.1872.2.5.2.1.9.3.1.9	INTEGER	read-create	Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
I32 portTeamNewCfgIndex	1.3.6.1.4.1.1872.2.5.2.1.9.3.1.1	Integer32	read-only	The identifier of the port team.
STR portTeamNewCfgName	1.3.6.1.4.1.1872.2.5.2.1.9.3.1.10	DisplayString	read-create	Name of the Port Team.
OCT portTeamNewCfgPorts	1.3.6.1.4.1.1872.2.5.2.1.9.3.1.3	OCTET STRING	read-only	The port list in the port team. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \| \|\|\|_ port 8 \| \|\| \| \|\|___ port 7 \| \|____ port 6 \| . . . \|_________ port 1 where x : 1 - The represented port belongs to the port team 0 - The represented port does not belong to the port team
I32 portTeamNewCfgRemovePort	1.3.6.1.4.1.1872.2.5.2.1.9.3.1.5	Integer32	read-create	The port to be deleted from the port team. When read, 0is returned.
I32 portTeamNewCfgRemoveTrunk	1.3.6.1.4.1.1872.2.5.2.1.9.3.1.8	Integer32	read-create	The trunk to be deleted from the port team. When read, 0is returned.
INT portTeamNewCfgState	1.3.6.1.4.1.1872.2.5.2.1.9.3.1.2	INTEGER	read-create	Enable or disable a port team.
portTeamNewCfgTable	1.3.6.1.4.1.1872.2.5.2.1.9.3		not-accessible	The port team new configuration.
portTeamNewCfgTableEntry	1.3.6.1.4.1.1872.2.5.2.1.9.3.1		not-accessible	A row in the port team configuration table.
OCT portTeamNewCfgTrunks	1.3.6.1.4.1.1872.2.5.2.1.9.3.1.6	OCTET STRING	read-only	The trunk list in the port team. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \| \|\|\|_ trunk 8 \| \|\| \| \|\|___ trunk 7 \| \|____ trunk 6 \| . . . \|_________ trunk 1 where x : 1 - The represented trunk belongs to the port team 0 - The represented trunk does not belong to the port team
I32 portTeamTableMaxSize	1.3.6.1.4.1.1872.2.5.2.1.9.1	Integer32	read-only	The maximum number of port teams.
stgCfg	1.3.6.1.4.1.1872.2.5.2.1.3
INT stgCurCfgAgingTime	1.3.6.1.4.1.1872.2.5.2.1.3.1.1.9	INTEGER	read-only	The timeout period in seconds for aging out dynamically learned forwarding information.
INT stgCurCfgBrgForwardDelay	1.3.6.1.4.1.1872.2.5.2.1.3.1.1.7	INTEGER	read-only	The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
INT stgCurCfgBrgHelloTime	1.3.6.1.4.1.1872.2.5.2.1.3.1.1.6	INTEGER	read-only	The value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
INT stgCurCfgBrgMaxAge	1.3.6.1.4.1.1872.2.5.2.1.3.1.1.8	INTEGER	read-only	The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
I32 stgCurCfgIndex	1.3.6.1.4.1.1872.2.5.2.1.3.1.1.1	Integer32	read-only	The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
INT stgCurCfgPortEdge	1.3.6.1.4.1.1872.2.5.2.1.3.3.1.7	INTEGER	read-only	The state of port edge.
I32 stgCurCfgPortIndex	1.3.6.1.4.1.1872.2.5.2.1.3.3.1.2	Integer32	read-only	The port identifier of a particular Spanning Tree Group.
INT stgCurCfgPortLink	1.3.6.1.4.1.1872.2.5.2.1.3.3.1.6	INTEGER	read-only	The type of the port link.
I32 stgCurCfgPortPathCost	1.3.6.1.4.1.1872.2.5.2.1.3.3.1.5	Integer32	read-only	The contribution of this port to the path cost of paths towards the spanning tree root which include this port (if MSTP/RSTP is enabled range is (0..200000000) else range is (0..65535) ).
INT stgCurCfgPortPriority	1.3.6.1.4.1.1872.2.5.2.1.3.3.1.4	INTEGER	read-only	The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
INT stgCurCfgPortState	1.3.6.1.4.1.1872.2.5.2.1.3.3.1.3	INTEGER	read-only	Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
stgCurCfgPortTable	1.3.6.1.4.1.1872.2.5.2.1.3.3		not-accessible	The table of Spanning Tree Group port configuration in the current_config.
stgCurCfgPortTableEntry	1.3.6.1.4.1.1872.2.5.2.1.3.3.1		not-accessible	Information about port configuration of a particular Spanning Tree Group.
INT stgCurCfgPriority	1.3.6.1.4.1.1872.2.5.2.1.3.1.1.5	INTEGER	read-only	The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
INT stgCurCfgState	1.3.6.1.4.1.1872.2.5.2.1.3.1.1.2	INTEGER	read-only	Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
I32 stgCurCfgStgIndex	1.3.6.1.4.1.1872.2.5.2.1.3.3.1.1	Integer32	read-only	The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
stgCurCfgTable	1.3.6.1.4.1.1872.2.5.2.1.3.1		not-accessible	The table of Spanning Tree Group configuration.
stgCurCfgTableEntry	1.3.6.1.4.1.1872.2.5.2.1.3.1.1		not-accessible	Information about a particular Spanning Tree Group configuration.
OCT stgCurCfgVlanBmap	1.3.6.1.4.1.1872.2.5.2.1.3.1.1.10	OCTET STRING	read-only	The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ vlan 9 \|\| \|\| \|\| \|\|___ vlan 8 \|\| \|____ vlan 7 \|\| . . . \|\|_________ vlan 2 \|__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree
I32 stgNewCfgAddVlan	1.3.6.1.4.1.1872.2.5.2.1.3.2.1.4	Integer32	read-write	The vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read.
INT stgNewCfgAgingTime	1.3.6.1.4.1.1872.2.5.2.1.3.2.1.12	INTEGER	read-write	The timeout period in seconds for aging out dynamically learned forwarding information.
INT stgNewCfgBrgForwardDelay	1.3.6.1.4.1.1872.2.5.2.1.3.2.1.10	INTEGER	read-write	The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
INT stgNewCfgBrgHelloTime	1.3.6.1.4.1.1872.2.5.2.1.3.2.1.9	INTEGER	read-write	The value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
INT stgNewCfgBrgMaxAge	1.3.6.1.4.1.1872.2.5.2.1.3.2.1.11	INTEGER	read-write	The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
INT stgNewCfgDefaultCfg	1.3.6.1.4.1.1872.2.5.2.1.3.2.1.3	INTEGER	read-write	Setting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1) is always returned When read, but it does not mean anything.
I32 stgNewCfgIndex	1.3.6.1.4.1.1872.2.5.2.1.3.2.1.1	Integer32	read-only	The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
INT stgNewCfgPortEdge	1.3.6.1.4.1.1872.2.5.2.1.3.4.1.7	INTEGER	read-create	The state of port edge.
I32 stgNewCfgPortIndex	1.3.6.1.4.1.1872.2.5.2.1.3.4.1.2	Integer32	read-only	The port identifier of a particular Spanning Tree Group.
INT stgNewCfgPortLink	1.3.6.1.4.1.1872.2.5.2.1.3.4.1.6	INTEGER	read-create	The type of the port link.
I32 stgNewCfgPortPathCost	1.3.6.1.4.1.1872.2.5.2.1.3.4.1.5	Integer32	read-create	The contribution of this port to the path cost of paths towards the spanning tree root which include this port (if MSTP/RSTP is enabled range is (0..200000000) else range is (0..65535) ).
INT stgNewCfgPortPriority	1.3.6.1.4.1.1872.2.5.2.1.3.4.1.4	INTEGER	read-create	The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
INT stgNewCfgPortState	1.3.6.1.4.1.1872.2.5.2.1.3.4.1.3	INTEGER	read-create	Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
stgNewCfgPortTable	1.3.6.1.4.1.1872.2.5.2.1.3.4		not-accessible	The table of Spanning Tree Group port configuration in the new_config.
stgNewCfgPortTableEntry	1.3.6.1.4.1.1872.2.5.2.1.3.4.1		not-accessible	Information about port configuration of a particular Spanning Tree Group.
INT stgNewCfgPriority	1.3.6.1.4.1.1872.2.5.2.1.3.2.1.8	INTEGER	read-write	The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
I32 stgNewCfgRemoveVlan	1.3.6.1.4.1.1872.2.5.2.1.3.2.1.5	Integer32	read-write	The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read.
INT stgNewCfgState	1.3.6.1.4.1.1872.2.5.2.1.3.2.1.2	INTEGER	read-write	Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
I32 stgNewCfgStgIndex	1.3.6.1.4.1.1872.2.5.2.1.3.4.1.1	Integer32	read-only	The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
stgNewCfgTable	1.3.6.1.4.1.1872.2.5.2.1.3.2		not-accessible	The table of Spanning Tree Groups configuration in the new_config.
stgNewCfgTableEntry	1.3.6.1.4.1.1872.2.5.2.1.3.2.1		not-accessible	Information about a particular Spanning Tree Group configuration.
OCT stgNewCfgVlanBmap	1.3.6.1.4.1.1872.2.5.2.1.3.2.1.13	OCTET STRING	read-only	The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ vlan 9 \|\| \|\| \|\| \|\|___ vlan 8 \|\| \|____ vlan 7 \|\| . . . \|\|_________ vlan 2 \|__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree
I32 stgStatsPortIndex	1.3.6.1.4.1.1872.2.5.2.2.2.1.1.2	Integer32	read-only	The port identifier of a particular Spanning Tree Group.
I32 stgStatsPortRcvCfgBpdus	1.3.6.1.4.1.1872.2.5.2.2.2.1.1.3	Integer32	read-only	Number of Configuration BPDU's received on this port.
I32 stgStatsPortRcvTcnBpdus	1.3.6.1.4.1.1872.2.5.2.2.2.1.1.4	Integer32	read-only	Number of TCN BPDU's received on this port.
stgStatsPortTable	1.3.6.1.4.1.1872.2.5.2.2.2.1		not-accessible	The table of Spanning Tree Group port statistics.
stgStatsPortTableEntry	1.3.6.1.4.1.1872.2.5.2.2.2.1.1		not-accessible	Statistics about port of a particular Spanning Tree Group.
I32 stgStatsPortXmtCfgBpdus	1.3.6.1.4.1.1872.2.5.2.2.2.1.1.5	Integer32	read-only	Number of Configuration BPDU's trasmitted from the port.
I32 stgStatsPortXmtTcnBpdus	1.3.6.1.4.1.1872.2.5.2.2.2.1.1.6	Integer32	read-only	Number of TCN BPDU's trasmitted from the port.
I32 stgStatsStpIndex	1.3.6.1.4.1.1872.2.5.2.2.2.1.1.1	Integer32	read-only	The identifier of a particular Spanning Tree Group.
stpInfo	1.3.6.1.4.1.1872.2.5.2.3.2
BRI stpInfoDesignatedRoot	1.3.6.1.4.1.1872.2.5.2.3.2.1.1.4	BridgeId	read-only	The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
I32 stpInfoForwardDelay	1.3.6.1.4.1.1872.2.5.2.3.2.1.1.9	Integer32	read-only	This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database.
I32 stpInfoHelloTime	1.3.6.1.4.1.1872.2.5.2.3.2.1.1.8	Integer32	read-only	The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
I32 stpInfoHoldTime	1.3.6.1.4.1.1872.2.5.2.3.2.1.1.10	Integer32	read-only	This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
I32 stpInfoIndex	1.3.6.1.4.1.1872.2.5.2.3.2.1.1.1	Integer32	read-only	The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
I32 stpInfoMaxAge	1.3.6.1.4.1.1872.2.5.2.3.2.1.1.7	Integer32	read-only	The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
BRI stpInfoPortDesignatedBridge	1.3.6.1.4.1.1872.2.5.2.3.2.2.1.6	BridgeId	read-only	The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
I32 stpInfoPortDesignatedCost	1.3.6.1.4.1.1872.2.5.2.3.2.2.1.5	Integer32	read-only	The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
OCT stpInfoPortDesignatedPort	1.3.6.1.4.1.1872.2.5.2.3.2.2.1.7	OCTET STRING	read-only	The Port Identifier of the port on the Designated Bridge for this port's segment.
BRI stpInfoPortDesignatedRoot	1.3.6.1.4.1.1872.2.5.2.3.2.2.1.4	BridgeId	read-only	The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
INT stpInfoPortEdge	1.3.6.1.4.1.1872.2.5.2.3.2.2.1.12	INTEGER	read-only	The port is an edge port or not. Returns disabled(2) when the port is not an edge port and returns enabled(1) when it is an edge port.
C32 stpInfoPortForwardTransitions	1.3.6.1.4.1.1872.2.5.2.3.2.2.1.8	Counter32	read-only	The number of times this port has transitioned from the Learning state to the Forwarding state.
I32 stpInfoPortIndex	1.3.6.1.4.1.1872.2.5.2.3.2.2.1.2	Integer32	read-only	The port identifier of a particular Spanning Tree Group.
INT stpInfoPortLinkType	1.3.6.1.4.1.1872.2.5.2.3.2.2.1.11	INTEGER	read-only	The point-to-point status of the LAN segment attached to this port. A value of p2p (1) indicates that this port is being treated as if it is connected to a point-to-point link. A value of shared(2) indicates that this port is being treated as having a shared media connection.
I32 stpInfoPortPathCost	1.3.6.1.4.1.1872.2.5.2.3.2.2.1.9	Integer32	read-only	The path cost of the port.
INT stpInfoPortRole	1.3.6.1.4.1.1872.2.5.2.3.2.2.1.10	INTEGER	read-only	The port role. Returns unknown(7) when MSTP/RSTP is not enabled, otherwise returns appropriate port role.
INT stpInfoPortState	1.3.6.1.4.1.1872.2.5.2.3.2.2.1.3	INTEGER	read-only	The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled, this object will have a value of disabled(1).
I32 stpInfoPortStpIndex	1.3.6.1.4.1.1872.2.5.2.3.2.2.1.1	Integer32	read-only	The identifier of a particular Spanning Tree Group.
stpInfoPortTable	1.3.6.1.4.1.1872.2.5.2.3.2.2		not-accessible	The table of Spanning Tree Group port information.
stpInfoPortTableEntry	1.3.6.1.4.1.1872.2.5.2.3.2.2.1		not-accessible	Information about port configuration for a particular Spanning Tree Group.
I32 stpInfoRootCost	1.3.6.1.4.1.1872.2.5.2.3.2.1.1.5	Integer32	read-only	The cost of the path to the root as seen from this bridge.
I32 stpInfoRootPort	1.3.6.1.4.1.1872.2.5.2.3.2.1.1.6	Integer32	read-only	The port number of the port which offers the lowest cost path from this bridge to the root bridge.
stpInfoTable	1.3.6.1.4.1.1872.2.5.2.3.2.1		not-accessible	The table of Spanning Tree Group information.
stpInfoTableEntry	1.3.6.1.4.1.1872.2.5.2.3.2.1.1		not-accessible	Information about a particular Spanning Tree Group.
TIK stpInfoTimeSinceTopChange	1.3.6.1.4.1.1872.2.5.2.3.2.1.1.2	TimeTicks	read-only	The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
C32 stpInfoTopChanges	1.3.6.1.4.1.1872.2.5.2.3.2.1.1.3	Counter32	read-only	The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
stpStats	1.3.6.1.4.1.1872.2.5.2.2.2
trunkgroup	1.3.6.1.4.1.1872.2.5.2.1.2
I32 trunkGroupCurCfgBwmContract	1.3.6.1.4.1.1872.2.5.2.1.2.2.1.4	Integer32	read-only	Default BW contract of a trunk group.
I32 trunkGroupCurCfgIndex	1.3.6.1.4.1.1872.2.5.2.1.2.2.1.1	Integer32	read-only	The identifier of the trunk group.
STR trunkGroupCurCfgName	1.3.6.1.4.1.1872.2.5.2.1.2.2.1.6	DisplayString	read-only	Name of a trunk group.
OCT trunkGroupCurCfgPorts	1.3.6.1.4.1.1872.2.5.2.1.2.2.1.2	OCTET STRING	read-only	The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
INT trunkGroupCurCfgState	1.3.6.1.4.1.1872.2.5.2.1.2.2.1.3	INTEGER	read-only	Enable or disable a trunk group.
trunkGroupCurCfgTable	1.3.6.1.4.1.1872.2.5.2.1.2.2		not-accessible	The table of trunk group configuration.
trunkGroupCurCfgTableEntry	1.3.6.1.4.1.1872.2.5.2.1.2.2.1		not-accessible	A row in the trunk group configuration table.
I32 trunkGroupNewCfgAddPort	1.3.6.1.4.1.1872.2.5.2.1.2.3.1.3	Integer32	read-create	The port to be added in the trunk group. When read, 0 is returned.
I32 trunkGroupNewCfgBwmContract	1.3.6.1.4.1.1872.2.5.2.1.2.3.1.7	Integer32	read-create	Default BW contract of a trunk group.
INT trunkGroupNewCfgDelete	1.3.6.1.4.1.1872.2.5.2.1.2.3.1.6	INTEGER	read-create	Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
I32 trunkGroupNewCfgIndex	1.3.6.1.4.1.1872.2.5.2.1.2.3.1.1	Integer32	read-only	The identifier of the trunk group.
STR trunkGroupNewCfgName	1.3.6.1.4.1.1872.2.5.2.1.2.3.1.9	DisplayString	read-create	Name of a trunk group.
OCT trunkGroupNewCfgPorts	1.3.6.1.4.1.1872.2.5.2.1.2.3.1.2	OCTET STRING	read-only	The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
I32 trunkGroupNewCfgRemovePort	1.3.6.1.4.1.1872.2.5.2.1.2.3.1.4	Integer32	read-create	The port to be deleted from the trunk group. when read, 0 is returned.
INT trunkGroupNewCfgState	1.3.6.1.4.1.1872.2.5.2.1.2.3.1.5	INTEGER	read-create	Enable or disable a trunk group.
trunkGroupNewCfgTable	1.3.6.1.4.1.1872.2.5.2.1.2.3		not-accessible	The table of trunk group configuration.
trunkGroupNewCfgTableEntry	1.3.6.1.4.1.1872.2.5.2.1.2.3.1		not-accessible	A row in the trunk group configuration table.
I32 trunkGroupTableMaxSize	1.3.6.1.4.1.1872.2.5.2.1.2.1	Integer32	read-only	The maximum number of entries in trunk group table.
vadcVlan	1.3.6.1.4.1.1872.2.5.2.1.10
INT vadcVlanCurCfgApInfo	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.18	INTEGER	read-only	Enable / Disable Autonomous address configuration flag in prefix.
I32 vadcVlanCurCfgBwmCont	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.2	Integer32	read-only	Default contract number for the VLAN
INT vadcVlanCurCfgCurHopLimit	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.10	INTEGER	read-only	Current hop limit field.
INT vadcVlanCurCfgIpv6LlaGen	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.4	INTEGER	read-only	Enable/disable IPv6 Link Local Address Generation.
INT vadcVlanCurCfgMaxIntBwAdv	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.8	INTEGER	read-only	Maximum interval between router advertisements.
INT vadcVlanCurCfgMFlag	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.11	INTEGER	read-only	Enable / Disable Managed address configuration flag.
INT vadcVlanCurCfgMinIntBwAdv	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.7	INTEGER	read-only	Minimum interval between router advertisements.
INT vadcVlanCurCfgMtu	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.9	INTEGER	read-only	Maximum Transmission Unit. Enter 0 for None.
I32 vadcVlanCurCfgNonIp	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.3	Integer32	read-only	BWM contract for non-ip traffic
INT vadcVlanCurCfgOFlag	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.12	INTEGER	read-only	Enable / Disable Other address configuration flag.
INT vadcVlanCurCfgOpInfo	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.17	INTEGER	read-only	Enable / Disable On-link flag in prefix.
U32 vadcVlanCurCfgPlTime	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.15	Unsigned32	read-only	Preferred life time.
U32 vadcVlanCurCfgReTransInt	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.6	Unsigned32	read-only	Retransmission interval.
INT vadcVlanCurCfgRlTime	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.14	INTEGER	read-only	Life Time.Enter 0 for None
INT vadcVlanCurCfgRouterAdv	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.5	INTEGER	read-only	Enable/disable router advertisement.
INT vadcVlanCurCfgRTime	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.13	INTEGER	read-only	Reachable time.
vadcVlanCurCfgTable	1.3.6.1.4.1.1872.2.5.2.1.10.1		not-accessible	The vADC table of VLAN configuration.
vadcVlanCurCfgTableEntry	1.3.6.1.4.1.1872.2.5.2.1.10.1.1		not-accessible	A row in the VLAN configuration table.
I32 vadcVlanCurCfgVlanId	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.1	Integer32	read-only	The VLAN identifier.
U32 vadcVlanCurCfgVlTime	1.3.6.1.4.1.1872.2.5.2.1.10.1.1.16	Unsigned32	read-only	Valid life time.
INT vadcVlanNewCfgApInfo	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.18	INTEGER	read-create	Enable / Disable Autonomous address configuration flag in prefix.
I32 vadcVlanNewCfgBwmCont	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.2	Integer32	read-create	Default contract number for the VLAN
INT vadcVlanNewCfgCurHopLimit	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.10	INTEGER	read-create	Current hop limit field.
INT vadcVlanNewCfgIpv6LlaGen	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.4	INTEGER	read-create	Enable/disable IPv6 Link Local Address Generation.
INT vadcVlanNewCfgMaxIntBwAdv	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.8	INTEGER	read-create	Maximum interval between router advertisements.
INT vadcVlanNewCfgMFlag	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.11	INTEGER	read-create	Enable / Disable Managed address configuration flag.
INT vadcVlanNewCfgMinIntBwAdv	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.7	INTEGER	read-create	Minimum interval between router advertisements.
INT vadcVlanNewCfgMtu	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.9	INTEGER	read-create	Maximum Transmission Unit. Enter 0 for None.
I32 vadcVlanNewCfgNonIp	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.3	Integer32	read-create	BWM contract for non-ip traffic
INT vadcVlanNewCfgOFlag	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.12	INTEGER	read-create	Enable / Disable Other address configuration flag.
INT vadcVlanNewCfgOpInfo	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.17	INTEGER	read-create	Enable / Disable On-link flag in prefix.
U32 vadcVlanNewCfgPlTime	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.15	Unsigned32	read-create	Preferred life time.
U32 vadcVlanNewCfgReTransInt	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.6	Unsigned32	read-create	Retransmission interval.
INT vadcVlanNewCfgRlTime	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.14	INTEGER	read-create	Life Time.Enter 0 for None
INT vadcVlanNewCfgRouterAdv	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.5	INTEGER	read-create	Enable/disable router advertisement.
INT vadcVlanNewCfgRTime	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.13	INTEGER	read-create	Reachable time.
vadcVlanNewCfgTable	1.3.6.1.4.1.1872.2.5.2.1.10.2		not-accessible	The vADC table of VLAN configuration.
vadcVlanNewCfgTableEntry	1.3.6.1.4.1.1872.2.5.2.1.10.2.1		not-accessible	A row in the VLAN configuration table.
I32 vadcVlanNewCfgVlanId	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.1	Integer32	read-only	The VLAN identifier.
U32 vadcVlanNewCfgVlTime	1.3.6.1.4.1.1872.2.5.2.1.10.2.1.16	Unsigned32	read-create	Valid life time.
vlan	1.3.6.1.4.1.1872.2.5.2.1.1
INT vlanCurCfgApInfo	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.24	INTEGER	read-only	Enable / Disable Autonomous address configuration flag in prefix.
I32 vlanCurCfgBwmContract	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.5	Integer32	read-only	Default contract number the VLAN
INT vlanCurCfgCurHopLimit	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.16	INTEGER	read-only	Current hop limit field.
INT vlanCurCfgIpv6LlaGen	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.10	INTEGER	read-only	Enable/disable IPv6 Link Local Address Generation.
INT vlanCurCfgJumbo	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.7	INTEGER	read-only	Enable or disable Jumbo frames on a VLAN
INT vlanCurCfgLearn	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.8	INTEGER	read-only	Enable or disable source MAC address learning on a VLAN
INT vlanCurCfgMaxIntBwAdv	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.14	INTEGER	read-only	Maximum interval between router advertisements.
INT vlanCurCfgMFlag	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.17	INTEGER	read-only	Enable / Disable Managed address configuration flag.
INT vlanCurCfgMinIntBwAdv	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.13	INTEGER	read-only	Minimum interval between router advertisements.
INT vlanCurCfgMtu	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.15	INTEGER	read-only	Maximum Transmission Unit. Enter 0 for None.
INT vlanCurCfgOFlag	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.18	INTEGER	read-only	Enable / Disable Other address configuration flag.
INT vlanCurCfgOpInfo	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.23	INTEGER	read-only	Enable / Disable On-link flag in prefix.
U32 vlanCurCfgPlTime	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.21	Unsigned32	read-only	Preferred life time.
OCT vlanCurCfgPorts	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.3	OCTET STRING	read-only	The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
U32 vlanCurCfgReTransInt	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.12	Unsigned32	read-only	Retransmission interval.
INT vlanCurCfgRlTime	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.20	INTEGER	read-only	Life Time.Enter 0 for None
INT vlanCurCfgRouterAdv	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.11	INTEGER	read-only	Enable/disable router advertisement.
INT vlanCurCfgRTime	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.19	INTEGER	read-only	Reachable time.
INT vlanCurCfgShared	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.9	INTEGER	read-only	Enable or disable shared property of a VLAN
INT vlanCurCfgState	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.4	INTEGER	read-only	Enable or disable a VLAN
I32 vlanCurCfgStg	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.6	Integer32	read-only	The Spanning Tree Group for the VLAN.
vlanCurCfgTable	1.3.6.1.4.1.1872.2.5.2.1.1.2		not-accessible	The table of VLAN configuration.
vlanCurCfgTableEntry	1.3.6.1.4.1.1872.2.5.2.1.1.2.1		not-accessible	A row in the VLAN configuration table.
I32 vlanCurCfgVlanId	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.1	Integer32	read-only	The VLAN identifier.
STR vlanCurCfgVlanName	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.2	DisplayString	read-only	The VLAN name.
U32 vlanCurCfgVlTime	1.3.6.1.4.1.1872.2.5.2.1.1.2.1.22	Unsigned32	read-only	Valid life time.
vlanInfo	1.3.6.1.4.1.1872.2.5.2.3.5
I32 vlanInfoBwmContract	1.3.6.1.4.1.1872.2.5.2.3.5.1.1.5	Integer32	read-only	Default BWM contract number information of a VLAN
INT vlanInfoId	1.3.6.1.4.1.1872.2.5.2.3.5.1.1.1	INTEGER	read-only	The VLAN identifier.
INT vlanInfoIdx	1.3.6.1.4.1.1872.2.5.2.3.5.2.1.1	INTEGER	read-only	The VLAN identifier.
INT vlanInfoJumbo	1.3.6.1.4.1.1872.2.5.2.3.5.1.1.4	INTEGER	read-only	Enable or disable Jumbo frames, Jumbo frames state information of a VLAN
INT vlanInfoLearn	1.3.6.1.4.1.1872.2.5.2.3.5.1.1.6	INTEGER	read-only	Enable or disable source MAC address learning, MAC address learning information of a VLAN
STR vlanInfoName	1.3.6.1.4.1.1872.2.5.2.3.5.1.1.2	DisplayString	read-only	The VLAN name.
OCT vlanInfoPorts	1.3.6.1.4.1.1872.2.5.2.3.5.1.1.7	OCTET STRING	read-only	The port list information in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
INT vlanInfoStatus	1.3.6.1.4.1.1872.2.5.2.3.5.1.1.3	INTEGER	read-only	Enable or disable, VLAN state information
vlanInfoTable	1.3.6.1.4.1.1872.2.5.2.3.5.1		not-accessible	The table of VLAN information.
vlanInfoTableEntry	1.3.6.1.4.1.1872.2.5.2.3.5.1.1		not-accessible	Information about a particular VLAN.
vlanInfoTableVADC	1.3.6.1.4.1.1872.2.5.2.3.5.2		not-accessible	The table of VLAN information for vADC.
vlanInfoTableVADCEntry	1.3.6.1.4.1.1872.2.5.2.3.5.2.1		not-accessible	Information about a particular VLAN for vADC.
STR vlanInfoVADC	1.3.6.1.4.1.1872.2.5.2.3.5.2.1.2	DisplayString	read-only	Display the VADC number which is connected to this VLAN.
I32 vlanMaxEnt	1.3.6.1.4.1.1872.2.5.2.1.1.1	Integer32	read-only	The maximum number of rows in the VLAN configuration table.
I32 vlanMaxVlanID	1.3.6.1.4.1.1872.2.5.2.1.1.4	Integer32	read-only	The maximum allowed VLAN ID.
I32 vlanNewCfgAddPort	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.5	Integer32	read-create	The port to be added to the specified VLAN. A '0' value is returned when read.
INT vlanNewCfgApInfo	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.27	INTEGER	read-create	Enable / Disable Autonomous address configuration flag in prefix.
I32 vlanNewCfgBwmContract	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.8	Integer32	read-create	Default contract number for the VLAN.
INT vlanNewCfgCurHopLimit	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.19	INTEGER	read-create	Current hop limit field.
INT vlanNewCfgDelete	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.7	INTEGER	read-create	This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN
INT vlanNewCfgIpv6LlaGen	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.13	INTEGER	read-create	Enable/disable IPv6 Link Local Address Generation.
INT vlanNewCfgJumbo	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.10	INTEGER	read-create	Enable or disable Jumbo frames on a VLAN
INT vlanNewCfgLearn	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.11	INTEGER	read-create	Enable or disable source mac address learning on a VLAN
INT vlanNewCfgMaxIntBwAdv	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.17	INTEGER	read-create	Maximum interval between router advertisements.
INT vlanNewCfgMFlag	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.20	INTEGER	read-create	Enable / Disable Managed address configuration flag.
INT vlanNewCfgMinIntBwAdv	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.16	INTEGER	read-create	Minimum interval between router advertisements.
INT vlanNewCfgMtu	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.18	INTEGER	read-create	Maximum Transmission Unit. Enter 0 for None.
INT vlanNewCfgOFlag	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.21	INTEGER	read-create	Enable / Disable Other address configuration flag.
INT vlanNewCfgOpInfo	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.26	INTEGER	read-create	Enable / Disable On-link flag in prefix.
U32 vlanNewCfgPlTime	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.24	Unsigned32	read-create	Preferred life time.
OCT vlanNewCfgPorts	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.3	OCTET STRING	read-only	The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
I32 vlanNewCfgRemovePort	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.6	Integer32	read-create	The port to be removed from the specified VLAN. A '0' value is returned when read.
U32 vlanNewCfgReTransInt	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.15	Unsigned32	read-create	Retransmission interval.
INT vlanNewCfgRlTime	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.23	INTEGER	read-create	Life Time.Enter 0 for None
INT vlanNewCfgRouterAdv	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.14	INTEGER	read-create	Enable/disable router advertisement.
INT vlanNewCfgRTime	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.22	INTEGER	read-create	Reachable time.
INT vlanNewCfgShared	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.12	INTEGER	read-create	Enable or disable shared property of a VLAN
INT vlanNewCfgState	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.4	INTEGER	read-create	Enable or disable a VLAN
I32 vlanNewCfgStg	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.9	Integer32	read-create	The Spanning Tree Group for the VLAN.
vlanNewCfgTable	1.3.6.1.4.1.1872.2.5.2.1.1.3		not-accessible	The table of VLAN configuration.
vlanNewCfgTableEntry	1.3.6.1.4.1.1872.2.5.2.1.1.3.1		not-accessible	A row in the VLAN configuration table.
I32 vlanNewCfgVlanId	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.1	Integer32	read-only	The VLAN identifier.
STR vlanNewCfgVlanName	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.2	DisplayString	read-create	The VLAN name.
U32 vlanNewCfgVlTime	1.3.6.1.4.1.1872.2.5.2.1.1.3.1.25	Unsigned32	read-create	Valid life time.

RFC description

Provides physical hardware and chassis management information for Radware Alteon ADC switches and Nortel BladeCenter Layer 2-3 GbE switch modules. Monitors physical components, temperature, and hardware status.

Start monitoring Alteon (Nortel/Radware) Cheetah-based application switches (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALTEON-CS-PHYSICAL-MIB