| OID symbolic | OID numeric | Type | Access | Description |
|---|
| alteonPlatformISDModule | 1.3.6.1.4.1.1872.2.3.1.1 | | | MIB Module for object and notification definitions for
event and alarms common to Alteon iSD products. |
| alteonISDPlatformMIB | 1.3.6.1.4.1.1872.2.3.1.2 | | | Toplevel ID of Alteon Platform ISD MIB. |
| isdObjects | 1.3.6.1.4.1.1872.2.3.1.2.1 | | | Object definitions for the Alteon ISD Platform MIB. |
| isdCluster | 1.3.6.1.4.1.1872.2.3.1.2.1.1 | | | A collection of objects to configure and monitor the iSDs
in the system. |
| isdClusterTable | 1.3.6.1.4.1.1872.2.3.1.2.1.1.1 | | not-accessible | Table of iSDs in this iSD cluster. |
| isdClusterEntry | 1.3.6.1.4.1.1872.2.3.1.2.1.1.1.1 | | not-accessible | |
| I32 isdIndex | 1.3.6.1.4.1.1872.2.3.1.2.1.1.1.1.1 | Integer32 | not-accessible | A unique index for this iSD. |
| IP isdIP | 1.3.6.1.4.1.1872.2.3.1.2.1.1.1.1.2 | IpAddress | read-only | The IP address of the iSD box |
| INT isdType | 1.3.6.1.4.1.1872.2.3.1.2.1.1.1.1.3 | INTEGER | read-write | Defines if a iSD is a master in the cluster, or a slave.
Note that there must be at least one master in the cluster.
A master iSD keeps copies of the configuration database and
software on its flash disk. Slave iSDs reads this info from
the masters. |
| INT isdOperStatus | 1.3.6.1.4.1.1872.2.3.1.2.1.1.1.1.4 | INTEGER | read-only | The current operational status of the iSD.
'swMismatch' means that the iSD is up, but the software
version does not match the rest of the system. The correct
software version must be installed on this iSD to make it
enter the 'up' state.
'appError' means that the iSD is up, but the applicaion
is not functioning, i.e. the iSD does not handle traffic
correctly. Check the application specific MIBs for further
diagnostics. |
| IP isdMIPOwner | 1.3.6.1.4.1.1872.2.3.1.2.1.1.2 | IpAddress | read-only | The IP address of the iSD that currently holds the MIP. |
| DAT isdCurrentTime | 1.3.6.1.4.1.1872.2.3.1.2.1.1.3 | DateAndTime | read-only | The current time on the cluster. |
| STR isdVersion | 1.3.6.1.4.1.1872.2.3.1.2.1.1.4 | DisplayString | read-only | The version of the image on the cluster. |
| isdImageTable | 1.3.6.1.4.1.1872.2.3.1.2.1.1.5 | | not-accessible | A table with resource utilization metrics for the running iSDs. This
table extends isdClusterTable. |
| isdImageEntry | 1.3.6.1.4.1.1872.2.3.1.2.1.1.5.1 | | not-accessible | A set of Resource utilization metrics for the iSDs. |
| I32 isdImageIndex | 1.3.6.1.4.1.1872.2.3.1.2.1.1.5.1.1 | Integer32 | not-accessible | A unique index for the images installed on the cluster. |
| STR isdImageVersion | 1.3.6.1.4.1.1872.2.3.1.2.1.1.5.1.2 | DisplayString | read-only | Version of the installed image |
| STR isdImageName | 1.3.6.1.4.1.1872.2.3.1.2.1.1.5.1.3 | DisplayString | read-only | Name of the installed image |
| INT isdImageStatus | 1.3.6.1.4.1.1872.2.3.1.2.1.1.5.1.4 | INTEGER | read-only | Status of the installed images
1 - Image that has been verified to work correctly.
2 - Image that is starting up for the first time; it will
eventually become permanent.
2 - Previously installed image
3 - Newly downloaded image |
| IP isdClusterMIP | 1.3.6.1.4.1.1872.2.3.1.2.1.1.6 | IpAddress | read-only | The Management IPaddress of the cluster. |
| IP isdClusterMask | 1.3.6.1.4.1.1872.2.3.1.2.1.1.7 | IpAddress | read-only | Network mask of the cluster. |
| currentAlarm | 1.3.6.1.4.1.1872.2.3.1.2.1.3 | | | A collection of objects for monitoring of active alarms
in the iSD system. |
| G32 numberOfCurrentAlarmsEx | 1.3.6.1.4.1.1872.2.3.1.2.1.3.1 | Gauge32 | read-only | Number of currently active alarms in the system. |
| TIK currentAlarmLastTimeChanged | 1.3.6.1.4.1.1872.2.3.1.2.1.3.2 | TimeTicks | read-only | The time an entry in the currentAlarmTable was changed.
It may be used by a management station as a value to
poll. If the value is changed, the management station
knows that the currentAlarmTable has been updated.
This will have the value of sysUpTime at the time which
alarm table was last updated. |
| currentAlarmTable | 1.3.6.1.4.1.1872.2.3.1.2.1.3.3 | | not-accessible | A list of currently active alarms in the system. |
| currentAlarmEntry | 1.3.6.1.4.1.1872.2.3.1.2.1.3.3.1 | | not-accessible | A set of parameters that describe a currently active
alarm. |
| I32 currentAlarmIndex | 1.3.6.1.4.1.1872.2.3.1.2.1.3.3.1.1 | Integer32 | not-accessible | An id that uniquely identifies an alarm. Each active alarm is
represented as one an entry in the currentAlarmTable. |
| ALA currentAlarmSeverity | 1.3.6.1.4.1.1872.2.3.1.2.1.3.3.1.2 | AlarmSeverity | read-write | The perceived severity of the fault. A manager can set
this value to clear only. When set to clear, the alarm
is removed from this table, and a 'clearAlarm' event is
generated. |
| OID currentAlarmOid | 1.3.6.1.4.1.1872.2.3.1.2.1.3.3.1.3 | OBJECT IDENTIFIER | read-only | The SNMP Notification which was sent to represent the alarm. |
| OID currentAlarmObject | 1.3.6.1.4.1.1872.2.3.1.2.1.3.3.1.4 | OBJECT IDENTIFIER | read-only | The alarming object. |
| STR currentAlarmCause | 1.3.6.1.4.1.1872.2.3.1.2.1.3.3.1.5 | DisplayString | read-only | The probable cause of the alarm. |
| DAT currentAlarmTime | 1.3.6.1.4.1.1872.2.3.1.2.1.3.3.1.6 | DateAndTime | read-only | The time the fault was detected. |
| isdMonitor | 1.3.6.1.4.1.1872.2.3.1.2.1.5 | | | A collection of objects for monitoring the performance
and resource utilization of the iSDs in the system. |
| isdResourceTable | 1.3.6.1.4.1.1872.2.3.1.2.1.5.1 | | not-accessible | A table with resource utilization metrics for the running iSDs. This
table extends isdClusterTable. |
| isdResourceEntry | 1.3.6.1.4.1.1872.2.3.1.2.1.5.1.1 | | not-accessible | A set of Resource utilization metrics for the iSDs. |
| TIK isdResourceUptime | 1.3.6.1.4.1.1872.2.3.1.2.1.5.1.1.1 | TimeTicks | read-only | Uptime of the iSD. |
| G32 isdResourceCpu | 1.3.6.1.4.1.1872.2.3.1.2.1.5.1.1.2 | Gauge32 | read-only | Resource load in percent. |
| G32 isdResourceMemory | 1.3.6.1.4.1.1872.2.3.1.2.1.5.1.1.3 | Gauge32 | read-only | Memory utilization in percent. |
| G32 isdResourceDisk | 1.3.6.1.4.1.1872.2.3.1.2.1.5.1.1.4 | Gauge32 | read-only | Disk utilization in percent. This value is the utilization of the
partition with the least percentage of free space. |
| isdNotifications | 1.3.6.1.4.1.1872.2.3.1.2.3 | | | Notification definitions for the Alteon ISD Platform MIB. |
| isdEvents | 1.3.6.1.4.1.1872.2.3.1.2.3.1 | | | This group lists events generated by iSDs in the
cluster. |
| NTF isdAlarmCleared | 1.3.6.1.4.1.1872.2.3.1.2.3.1.1 | | | This event is sent when an alarm has been cleared,
either by the system or by an operator. Note that the
currentAlarmIndex is implicitly sent as the instance identifier
for currentAlarmOid. All alarm-specific variables sent in the
alarm notification is also sent in this notifications. |
| NTF isdTopologyChange | 1.3.6.1.4.1.1872.2.3.1.2.3.1.2 | | | This event signals that the topology of the iSD cluster has
changed. |
| NTF isdAuthenticationFailure | 1.3.6.1.4.1.1872.2.3.1.2.3.1.4 | | | This event signals that an authentication failure has occurred. |
| NTF isdMipMigration | 1.3.6.1.4.1.1872.2.3.1.2.3.1.5 | | | This event signals that the master IP has migrated to another iSD. |
| isdAlarms | 1.3.6.1.4.1.1872.2.3.1.2.3.2 | | | This group lists alarms generates by iSDs in the cluster.
An alarm is a special form of event which represents a
fault in the system that needs to be reported. |
| NTF isdDown | 1.3.6.1.4.1.1872.2.3.1.2.3.2.1 | | | This alarm is sent when the iSD goes down. |
| NTF isdUp | 1.3.6.1.4.1.1872.2.3.1.2.3.2.2 | | | This alarm is sent when the iSD comes back online. |
| NTF isdSingleMaster | 1.3.6.1.4.1.1872.2.3.1.2.3.2.3 | | | This alarm is sent when there is just a sindle iSD master
left in the system. The fault tolerance level of the system
is severly degraded - if the last master fails, the system
cannot be reconfigured.
This alarm is only set if there are more than two masters
configured in the system. |
| NTF isdMemoryStateChange | 1.3.6.1.4.1.1872.2.3.1.2.3.2.4 | | | This alarm is sent when there is a change in the current
status of the memory. It is expected that the user will be able
to configure this. The defaults could be that 75% would signal
a warning and 90% would be an error. The user would be able to
specify these values themselves as well as be able to rearm the
system. |
| NTF isdCpuStateChange | 1.3.6.1.4.1.1872.2.3.1.2.3.2.5 | | | This alarm is sent when there is a change in the current
status of the CPU. It is expected that the user will be able
to configure this. The defaults could be that 75% would signal
a warning and 90% would be an error. The user would be able to
specify these values themselves as well as be able to rearm the
system. |
| NTF isdDiskStateChange | 1.3.6.1.4.1.1872.2.3.1.2.3.2.6 | | | This alarm is sent when there is a change in the current
status of the Disk. The partition with the greatest utilization
is examined. It is expected that the user will be able
to configure this. The defaults could be that 75% would signal
a warning and 90% would be an error. The user would be able to
specify these values themselves as well as be able to rearm the
system. |
| isdNotificationObjects | 1.3.6.1.4.1.1872.2.3.1.2.4 | | | Notification objects for the Alteon ISD Platform MIB. |
| DAT isdEventTime | 1.3.6.1.4.1.1872.2.3.1.2.4.1 | DateAndTime | accessible-for-notify | This object may be included in a notification definition for
an event. It specifies the time the event was generated. |
| STR isdEventDescription | 1.3.6.1.4.1.1872.2.3.1.2.4.2 | DisplayString | accessible-for-notify | This object may be included in a notification definition for
an event. It specifies extra information. |
| G32 isdUtilization | 1.3.6.1.4.1.1872.2.3.1.2.4.3 | Gauge32 | accessible-for-notify | Resource utilization in percent. |
| G32 isdLoad | 1.3.6.1.4.1.1872.2.3.1.2.4.4 | Gauge32 | accessible-for-notify | Resource load. 200 means in essence 2 processes want
the CPU; this is considered a warning level. 300 means
three processes want the CPU; this is considered a
critical level. |
